Surface‐enhanced Raman scattering of 4‐aminobenzenethiol on silver: confirmation of the origin of b2‐type bands

In order to resolve the dispute on the origin of the b₂‐type bands in the surface‐enhanced Raman scattering (SERS) of 4‐aminobenzenethiol (4‐ABT), we have measured its SERS spectra under a variety of conditions, including variable temperature and rotation, electrochemistry, and pH, as well as in the presence of a reducing agent. For comparison, the SERS spectra of 4‐nitrobenzenethiol (4‐NBT) and methyl orange (MO), a prototype azo compound, were also measured. First, we found that 4‐ABT on Ag is not subjected to photoreaction, although 4‐NBT is highly photoreactive on a silver surface. In the electrochemical environment, b₂‐type bands of 4‐ABT lost their intensity at very negative potentials, but the intensity recovered immediately upon raising the potential. In addition, b₂‐type bands were observed under rotation even after lowering the potential. The disappearance and reappearance of the b₂‐type bands could also be observed by bringing the sample of 4‐ABT on Ag into contact consecutively with a borohydride solution and water. This is because the surface potential of Ag is lowered by contact with a borohydride solution. Besides, we found that not only the normal Raman but also the SERS spectral features of 4‐ABT are hardly affected by pH variation, while the spectral features of MO are greatly affected, especially in the region of the NN stretching vibration, suggesting that the possibility of a photoconversion of 4‐ABT to an azo compound is low. Altogether, the b₂‐type bands were attributed to 4‐ABT, appearing in conjunction with the chemical enhancement mechanism in SERS. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman,infrared, SERS and theoretical study of 3‐(1‐phenylpropan‐2‐ylamino) propanenitrile,fenproporex

Infrared, Raman and surface‐enhanced Raman scattering (SERS) spectra of 3‐(1‐phenylpropan‐2‐ylamino)propanenitrile (fenproporex) have been recorded. Density functional theory (DFT) with the B3LYP functional was used for optimizations of ground state geometries and simulation of Raman and SERS vibrational spectra of this molecule. Bands of the vibrational spectra were assigned in detail. The comparison of SERS spectra obtained by using colloidal silver and gold nanoparticles with the corresponding Raman spectrum reveals enhancement and shifts in bands, suggesting a possible partial charge‐transfer mechanism in the SERS effect. Information about the orientation of fenproporex on the nanometer‐sized metal structures is also obtained. Copyright © 2011 John Wiley & Sons, Ltd.     

Identification of two Ag‐2,2′:6′,2″‐terpyridine surface species on Ag nanoparticle surfaces by excitation wavelength dependence of SERS spectra and factor analysis: evidence for chemical mechanism contribution to SERS of Ag(0)–tpy

Measurement and interpretation of the excitation wavelength dependence of surface‐enhanced Raman scattering (SERS) spectra of molecules chemisorbed on plasmonic, e.g. Ag nanoparticle (NP) surfaces, are of principal importance for revealing the charge transfer (CT) mechanism contribution to the overall SERS enhancement. SERS spectra, their excitation wavelength dependence in the 445–780‐nm range and factor analysis (FA) were used for the identification of two Ag‐2,2′:6′,2″‐terpyridine (tpy) surface species, denoted Ag⁺–tpy and Ag(0)–tpy, on Ag NPs in systems with unmodified and/or purposefully modified Ag NPs originating from hydroxylamine hydrochloride‐reduced hydrosols. Ag⁺–tpy is a spectral analogue of [Ag(tpy)]⁺ complex cation, and its SERS shows virtually no excitation wavelength dependence. By contrast, SERS of Ag(0)–tpy surface complex generated upon chloride‐induced compact aggregate formation and/or in strongly reducing ambient shows a pronounced excitation wavelength dependence attributed to a CT resonance (the chemical mechanism) contribution to the overall SERS enhancement. Both the resonance (λ_exc = 532 nm) and off‐resonance (λ_exc = 780 nm) pure‐component spectra of Ag(0)–tpy obtained by FA are largely similar to surface‐enhanced resonance Raman scattering (λ_exc = 532 nm in resonance with singlet metal to ligand CT (¹ MLCT) transition) and SERS (λ_exc = 780 nm) spectra of [Fe(tpy)₂]²⁺ complex dication. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of surface morphology on surface‐enhanced Raman scattering of 4‐aminobenzenethiol adsorbed on gold substrates

The substrate‐dependent surface‐enhanced Raman scattering (SERS) of 4‐aminobenzenethiol (4‐ABT) adsorbed on Au surfaces has been investigated. 4‐ABT is one of the very unique adsorbate molecules whose SERS spectral patterns are known to be noticeably dependent on the relative contribution of chemical enhancement mechanism vs electromagnetic enhancement mechanism. The SERS spectral patterns of 4‐ABT adsorbed on gold substrates with various surface morphology have thus been analyzed in terms of the symmetry types of the vibrational modes. Almost invisibly weak b₂ type vibrational bands were observed in the SERS spectra of the 4‐ABT adsorbed on Au colloidal sol nanoparticles or commercially available Au micro‐powders because of the weak contribution of the chemical enhancement. However, greatly enhanced b₂ vibrational bands were observed in the spectra of the 4‐ABT molecules adsorbed on the synthesized Au(Zn) sponge or the electrochemically roughened Au(ORC) foil caused by the strong contribution of the chemical enhancement mechanism. Copyright © 2008 John Wiley & Sons, Ltd.     

Identification of species formed after pyridine adsorption on iron,cobalt, nickel and silver electrodes by SERS and theoretical calculations

The adsorption of pyridine (py) on Fe, Co, Ni and Ag electrodes was studied using surface‐enhanced Raman scattering (SERS) to gain insight into the nature of the adsorbed species. The wavenumber values and relative intensities of the SERS bands were compared to the normal Raman spectrum of the chemically prepared transition metal complexes. Raman spectra of model clusters M₄(py) (four metal atoms bonded to one py moiety) and M₄(α‐pyridil) where M = Ag, Fe, Co or Ni were calculated by density functional theory (DFT) and used to interpret the experimental SERS results. The similarity of the calculated M₄(py) spectra with the experimental SERS spectra confirm the molecular adsorption of py on the surface of the metallic electrodes. All these results exclude the formation of adsorbed α‐pyridil species, as suggested previously. Copyright © 2009 John Wiley & Sons, Ltd.     

Theoretical elucidation of the origin of surface‐enhanced Raman spectra of PCB52 adsorbed on silver substrates

To better understand experimentally observed surface‐enhanced Raman Scattering (SERS) of polychlorinated biphenyls (PCBs) adsorbed on nanoscaled silver substrates, a systematic theoretical study was performed by carrying out density functional theory and time‐dependent density functional theory calculations. 2,2′,5,5′‐tetrachlorobiphenyl (PCB52) was chosen as a model molecule of PCBs, and Ag_n (n = 2, 4, 6, and 10) clusters were used to mimic active sites of substrates. Calculated normal Raman spectra of PCB52–Ag_n (n = 2, 4, 6, and 10) complexes are analogical in profile to that of isolated PCB52 with only slightly enhanced intensity. In contrast, the corresponding SERS spectra calculated at adopted incident light are strongly enhanced, and the calculated enhancement factors are 10⁴ ~ 10⁵. Thus, the experimentally observed SERS phenomenon of PCBs supported on Ag substrates should correspond to the SERS spectra rather than the normal Raman spectra. The dominant enhancement in Raman intensities origins from the charge transfer resonance enhancement between the molecule and clusters. Copyright © 2014 John Wiley & Sons, Ltd.     

Potential‐induced Raman behavior of individual (R)‐di‐2‐naphthylprolinol molecules on a Ag‐modified Ag electrode

The applicability of surface‐enhanced Raman spectroscopy is demonstrated to probe the adsorption behavior of individual molecules on a Ag electrode. High‐quality SERS spectra of (R)‐di‐2‐naphthylprolinol (DNP) were obtained from ultradilute solutions (10⁻¹² M ) on the Ag‐nanoparticle‐modified Ag electrode, which is attributed to the high electromagnetic (EM) effect of the SERS‐active system as well as to the strong adsorption and interaction of DNP molecules with Ag. The stable SERS spectra present remarkable potential dependence, which gives evidence for the behavior of individual DNP molecules on the Ag surface. Based on statistical analysis for the probability of DNP molecules located in ‘hot spots’, we propose an SERS mechanism for individual molecules in the electrode system, in combination with the hot‐spot model and orientation of the probe molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Visible light response of silver 4‐aminobenzenethiolate and silver 4‐dimethylaminobenzenethiolate probed by Raman scattering spectroscopy

Silver thiolate is a layered compound with a Raman spectrum that is known to change with time, becoming the same as the surface‐enhanced Raman scattering (SERS) spectrum of the parent thiol molecule adsorbed on Ag nanoparticles. On this basis, the Raman scattering characteristics of silver 4‐aminobenzenethiolate (Ag‐4ABT) compounds were investigated to determine whether certain peaks that are identifiable in the SERS spectrum of 4‐aminobenzenethiol (4‐ABT) but absent in its normal Raman spectrum were also apparent in the Ag salt spectrum. For comparative purposes, the Raman scattering characteristics of silver 4‐dimethylaminobenzenethiolate (Ag‐4MABT) were also examined. Raman spectra acquired while spinning the sample were typified by only a₁‐type vibrational bands of Ag‐4ABT and Ag‐4MABT, whereas in the static condition, several non‐a₁‐type bands were identified. The spectral patterns acquired in the static condition were similar to the intrinsic SERS spectra of 4‐ABT or 4‐dimethylaminobenzenethiol (4‐MABT) adsorbed on pure Ag nanoparticles. Notably, the CH₃ group vibrational bands were observable for Ag‐4MABT irrespective of the sample rotation. In addition, no decrease in intensity during irradiation with a visible laser was observed for any of the bands, suggesting that no chemical conversion actually took place in either 4‐ABT or 4‐MABT. The preponderance of evidence led to the conclusion that the non‐a₁‐type bands observable in the SERS spectra must be associated with the chemical enhancement mechanism acting on the Ag nanoparticles. The chemical enhancement effect was more profound at 514.5 nm than at 632.8 nm, and was more favorable for 4‐ABT than 4‐MABT at both wavelengths. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering on colloid gels originated from low molecular weight gelator

Surface‐enhanced Raman scattering (SERS) on silver and gold colloid gels formed by a low molecular weight organic gelator, bis‐(S‐phenylalanine) oxalyl amide, was obtained. Strong Raman signals dominate in the SERS spectra of hydrogels containing silver nanoparticles prepared by citrate and borohydride reduction methods, whereas broad bands of low intensity are detected in the spectra of gold colloid gels. Resemblance between Raman spectrum of the crystalline substance and the SERS spectra of the silver nanoparticle–hydrogel composites implies the electromagnetic nature of the signal enhancement. A change in Raman intensity of the benzene and amide II bands caused by an increase in temperature and concentration indicates that the gelling molecules are strongly attached through the benzene moieties to the metal nanoparticles while participating in gel formation by intermolecular hydrogen bonding between the adjacent oxalyl amide groups. Transmission electron microscopy reveals a dense gel structure in the close vicinity of the enhancing metal particles for both silver colloid gels. Copyright © 2008 John Wiley & Sons, Ltd.     

Comparison of SERRS and RRS excitation profiles of [Fe(tpy)2]2+ (tpy = 2,2':6',2'‐terpyridine) supported by DFT calculations: effect of the electrostatic bonding to chloride‐modified Ag nanoparticles on its vibrational and electronic structure

Nonresonance (or normal) Raman scattering (NRS), resonance Raman scattering (RRS), surface‐enhanced Raman scattering (SERS), and surface‐enhanced RRS (SERRS) spectra of [Fe(tpy)₂]²⁺ complex dication (tpy = 2,2':6',2''‐terpyridine) are reported. The comparison of RRS/NRS and SERRS/SERS excitation profiles of [Fe(tpy)₂]²⁺ spectral bands in the range of 445–780 nm is supported by density functional theory (DFT) calculations, Raman depolarization measurements, comparison of the solid [Fe(tpy)₂](SO₄)₂ and solution RRS spectra, and characterization of the Ag nanoparticle (NP) hydrosol/[Fe(tpy)₂]²⁺ SERS/SERRS active system by surface plasmon extinction spectrum and transmission electron microscopy image of the fractal aggregates (D = 1.82). By DFT calculations, both the Raman active modes and the electronic states of the complex have been assigned to the symmetry species of the D_2d point group. It has been demonstrated that upon the electrostatic bonding of the complex dication to the chloride‐modified Ag NPs, the geometric and ground state electronic structure of the complex and the identity of the three different metal‐to‐ligand charge transfer (¹MLCT) electronic transitions remain preserved. On the other hand, the effect of ion pairing manifests itself by a slight change in localization of one of the electronic transitions (with max. at 552 nm) as well as by promotion of the Herzberg–Teller activation of E modes resulting from coupling of E and B₂ excited electronic states. Finally, the very low, 1 × 10⁻¹¹ M SERRS spectral detection limit of [Fe(tpy)₂]²⁺ at 532‐nm excitation is attributed to a concerted action of the electromagnetic and molecular resonance mechanism, in conjunction to the electrostatic bonding of the complex dication to the chloride‐modified Ag NP surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Adsorption and reduction reactions of anthraquinone derivatives on gold electrodes studied with electrochemical surface‐enhanced Raman spectroscopy

Electrochemical surface‐enhanced Raman spectroscopy (EC‐SERS), combined with cyclic voltammetry, and the density functional theoretical (DFT) method were used to investigate self‐assembled monolayer (SAM) adsorption and reduction processes. Here, we choose the system of interest, being thiolacetyl‐terminated 2‐phenylene ethynylene‐substituted anthraquinone molecule (2‐AQ) on gold electrodes in buffered aqueous and aprotic solutions. In the buffered aqueous solution, the results of cyclic voltammetry and EC‐SERS measurements, as well as DFT calculations, indicate that the adsorbed molecules pass through a two‐electron two‐proton reduction reaction with cathodic polarization. In particular, the latter two methods confirmed the structural changes of SAMs during the process of redox reaction, 2‐AQ + 2e + 2H⁺ → 2‐AQH₂, where 2‐AQ and 2‐AQH₂ are the oxidized and reduced forms, respectively. In aprotic solutions (acetonitile), a stepwise reaction mechanism was proposed on the basis of the results of EC‐SERS and DFT calculations. The first reduction peak should be a half reaction process 2‐AQ + e → 2‐AQ⁻, where 2‐AQ⁻ is a single electron reduced form. Compared with that of 2‐AQ SAMs in the buffered aqueous solution, the results of EC‐SERS and DFT calculations in aprotic solution suggested that the solvent effect significantly influences the redox process of 2‐AQ in electrochemical interfaces. Copyright © 2012 John Wiley & Sons, Ltd.     

Enhancement in SERS intensities of azo dyes adsorbed on ZnO by plasma treatment

Surface‐enhanced Raman scattering (SERS) spectra of azo dyes (methyl orange and p‐methyl red) adsorbed on ZnO nanoparticles were observed. Hydrothermally synthesized ZnO nanoparticles were characterized by powder X‐ray diffraction and X‐ray photoelectron spectroscopy. The ZnO nanoparticle size, monitored with X‐ray diffraction, was tuned by calcination to optimize SERS intensities. The observed SERS effect of azo dyes adsorbed on ZnO can be ascribed to charge‐transfer resonance effect. Time‐dependent density functional theory was used to calculate the optical spectra and interpret the chemical enhancement observed in the experiment. The SERS enhancement factors for methyl red on ZnO were boosted by nearly four times and twice with O₂ plasma and H₂ plasma, respectively. However, plasma treatment showed no effect on the enhancement factors of methyl orange on ZnO. We conclude that plasma‐induced defect formation and band gap shift in ZnO and the coupling of energy levels between ZnO and azo dye molecules are responsible for the observed enhancement of SERS intensities. Copyright © 2014 John Wiley & Sons, Ltd.     

Identification of berberine in ancient and historical textiles by surface‐enhanced Raman scattering

The highly fluorescent natural dye berberine can be easily identified in microscopic textile samples by surface‐enhanced Raman spectroscopy employing citrate‐reduced Ag colloid. The ordinary Raman (OR) and SERS spectra of berberine are presented and discussed in the light of a DFT calculation. Using FT‐Raman and FT‐SERS we could reliably compare relative intensity shifts and investigate the adsorption geometry of berberine on Ag nanoparticles. The significant enhancement in the FT‐SERS spectrum of the out‐of‐plane ring system bending deformation mode at 729 cm⁻¹ relative to a group of in‐plane vibrations at around 1500 cm⁻¹ was interpreted as evidence of a ‘flat‐on’ adsorption geometry. SERS was successfully used to identify berberine in silk fiber samples coated with colloidal Ag following a pretreatment with HCl vapor. The SERS method allowed us to detect berberine in a microscopic sample of a single silk fiber from a severely degraded and soiled 17th Century Chinese textile fragment. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical study on adsorption properties of methyl methacrylate and its molecular chain within metal‐organic frameworks

Utilizing metal‐organic frameworks (MOFs) as a “polymerization container” is a very effective method to prepare oriented and therefore birefringent polymer materials. In particular, the adsorption of polymer monomers and molecular chains within MOFs has a profound impact on the orientation of polymer chains. In this work, a theoretical study on the adsorption properties of methyl methacrylate (MMA) and its molecular chain within MOFs has been conducted by employing a combination of molecular dynamics, density functional theory, and Monte Carlo method, where 2 MOFs, [Zn₂(1,4‐benzenedicarboxylate)₂triethylenediamine]_n and [Zn₂(4,4′‐biphenyldicarboxylate)₂triethylenediamine]_n, were chosen. The corresponding number and degree of orientation of adsorbed molecules in these 2 MOFs were obtained from the simulations. The calculation results revealed 3 factors that affect the adsorption and orientation of MMA monomers in MOF pore channels. First, as the walls of the MOF pores are polar surfaces and consist of metal ions and organic ligands, the electrostatic interaction between the MOF channels and polar MMA molecules promotes the adsorption and orientation of the MMA monomers within the pore channel. Second, the electrostatic interactions between monomers can reduce the intermolecular gaps, which similarly assist in their orientation. Last, the relative sizes of the MOF pores and the monomers are also relevant. When the sizes of the MOF channels and monomers are similar, the molecular chains show a higher degree of orientation. The results and the findings of this work could provide predictive methods for selecting polymeric monomers or MOFs that may be ideal for the control of polymer chain orientation.     

Direct observation of surface‐enhanced Raman scattering in ZnO nanocrystals

We have been able to observe the surface‐enhanced Raman scattering (SERS) from 4‐mercaptopyridine (4‐Mpy) molecules adsorbed on ZnO nanocrystals, which display 10³ enhancement factors (EFs). An excitation wavelength‐dependent behavior is clearly observed. Another molecule BVPP is also observed to have surface‐enhanced Raman signals. The chemical enhancement is most likely responsible for the observed enhancement, since plasmon resonances are ruled out. The research is important not only for a better understanding of the SERS mechanism, but also for extension of the application of Raman spectroscopy to a variety of adsorption problems on a semiconductor surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Adsorption of 4,4′‐thiobisbenzenethiol on silver surfaces: surface‐enhanced Raman scattering study

Adsorption of 4,4′‐thiobisbenzenethiol (4,4′‐TBBT) on a colloidal silver surface and a roughened silver electrode surface was investigated by means of surface‐enhanced Raman scattering (SERS) for the first time, which indicates that 4,4′‐TBBT is chemisorbed on the colloidal silver surface as dithiolates by losing two H‐atoms of the S H bond, while as monothiolates on the roughened silver electrode. The different orientations of the molecules on both silver surfaces indicate the different adsorption behaviors of 4,4′‐TBBT in the two systems. It is inferred from the SERS signal that the two aromatic rings in 4,4′‐TBBT molecule are parallel to the colloidal silver surface as seen from the disappearance of ν_{C H} band (3054 cm⁻¹), which is a vibrational mode to be used to determine the orientation of a molecule on metals according to the surface selection rule, while on the roughened silver electrode surface they are tilted to the surface as seen from the enhanced signal of ν_{C H}. The orientation of the C‐S bond is tilted with respect to the silver surface in both cases as inferred from the strong enhancement of the ν_{C S}. SERS spectra of 4,4′‐TBBT on the roughened silver electrode with different applied potentials reveal that the enhancement of 4,4′‐TBBT on the roughened silver electrode surface may be related to the chemical mechanism (CM). More importantly, the adsorption of 4,4′‐TBBT on the silver electrode is expected to be useful to covalently adsorb metal nanoparticles through the free S H bond to form two‐ or three‐ dimensional nanostructures. Copyright © 2007 John Wiley & Sons, Ltd.     

Adsorption of neurotensin‐family peptides on SERS‐active Ag substrates

Kinetensin (KN) and its amino acids 1–8 fragment ([des‐Leu⁹]KN), neuromedin N (NMN), and xenopsin (XP) and its two analogs (XP‐1 and XP‐2) belong to the neurotensin family of peptides and are known to stimulate the growth of human tumors. In this work, we report Fourier transform‐Raman and surface‐enhanced Raman scattering (SERS) studies of these peptides and discuss their structures, orientation, and mode of adsorption onto a highly specific, electrochemically roughened SERS‐active Ag electrode that is characterized by the formation of a 50–150 nm Ag island on its surface. We show that the investigated peptides bind preferentially to this surface by substantial electronic overlap between the metal surface and the π‐orbitals of the benzene rings of the Phe, Tyr, and Trp residues, which forces them to take parallel or almost parallel orientations with respect to the surface. In addition, the –CH₂–, –CNH₂, and –COO^‐ molecular fragments are involved in interactions with (binding to or in close proximity with) the Ag surface. The SERS data show that the adsorption modes in each of these cases are very similar. In addition, we show that the specific differences in the amino acid sequences do not significantly affect the orientation of the investigated peptides on the Ag substrate. This result implies that the N‐termini of the neurotensin‐family peptides do not influence the mode for adsorption onto the Ag substrates. Copyright © 2012 John Wiley & Sons, Ltd.     

Adsorption of purpald SAMs on silver and gold electrodes: a Raman mapping study

The adsorption modes of 4‐amino‐3‐hydrazino‐5‐mercapto‐1,2,4‐trizole (purpald) self‐assembled monolayers (SAMs) formed on SERS‐active silver and gold electrodes were comparatively studied using surface‐enhanced Raman scattering (SERS), and the self‐assembling procedures were investigated by the Raman mapping technique. Purpald SAMs adopted a titled orientation with S, N2 atoms anchoring to the silver electrode and the  N7H₂ close to the surface, whereas purpald stood up on the gold electrode through S, N5 atoms and with  N8H₂ adjacent to the surface. The density functional theory (DFT) at the level of B3LYP was performed to help explain their different adsorption behaviors on the silver and gold electrodes. Copyright © 2006 John Wiley & Sons, Ltd.     

Adjustment and control of SERS activity of metal substrates by pressure

Metal pellets of silver and copper for surface‐enhanced Raman scattering (SERS) spectroscopy were prepared by compression with different pressures. It was found that the SERS activity of the pellet could be controlled by pressure. Enhanced Raman scattering properties of the metal pellets in the presence of adsorbed 4‐mercaptobenzoic acid (4‐MBA) with excitation at 632.8 or 514 nm could be obtained by choosing proper pressure of pellatization. The SERS peak intensity of the band at ∼1584 cm⁻¹ of 4‐MBA adsorbed on the metal pellets varies as a function of applied pressure, and which is about 1.2–32 times greater than when it is adsorbed on silver and copper particles. The calculated results of three‐dimensional finite‐difference time‐domain method (3D‐FDTD) are in good agreement with the experimental data. Moreover, no spurious peaks appear in the SERS spectra of the samples because no other chemicals are involved in the simple preparation process of the metal pellets, which will facilitate its use as an SERS‐active substrate for analytical purposes. In summary, SERS‐active metal pellets can be produced simply and cost effectively by the method reported here, and this method is expected to be utilized in the development of SERS‐based analytical devices. Copyright © 2009 John Wiley & Sons, Ltd.