Nanoporous Ag–GaN thin films prepared by metal‐assisted electroless etching and deposition as three‐dimensional substrates for surface‐enhanced Raman scattering

Three‐dimensional (3D) nanoporous gallium nitride (PGaN) scaffolds are fabricated by Pt‐assisted electroless hydrofluoric acid (HF) etching of crystalline GaN followed by in situ electroless deposition of Ag nanostructures onto the interior surfaces of the nanopores, yielding a large surface area substrate for surface‐enhanced Raman scattering (SERS). The resulting 3D SERS‐active substrates have been optimized by varying reaction parameters and starting material concentration, exhibiting enhanced Raman signals 10–100× more intense than either (1) sputtered Ag‐coated porous GaN or (2) Ag‐coated planar GaN. The increase in SERS signal is attributed to a combination of the large surface area and the inherent transparency of PGaN in the visible spectral region. Overall, Ag‐decorated PGaN is a promising platform for high sensitivity SERS detection and chemical analysis, particularly for reaction and metabolic products that can be trapped inside the highly anisotropic nanoscale pores of PGaN. The potential of this sampling mode is illustrated by the ability to acquire Raman spectra of adenine down to 5 fmol. Additionally, correlated SERS and laser desorption/ionization mass spectrometry spectra can be acquired from same sample spot without further preparation, opening new possibilities for the investigation of surface‐bound molecules with substantially enhanced information content. Copyright © 2012 John Wiley & Sons, Ltd.     

Particle‐Arrayed Silver Mesocubes Synthesized via Reducing Silver Oxide Mesocrystals for Surface‐Enhanced Raman Spectroscopy

In this study, we demonstrate an easy particle‐mediated protocol using the specific structure of mesocrystal Ag₂O sacrificial templates to synthesize highly rough‐cubic Ag mesocages. To the best of our knowledge, the mesocrystal particles are reported for the first time as sacrificial templates for synthesizing metal particles. The obtained Ag mesocages show high surface‐enhanced Raman scattering (SERS) sensitivity because of the highly rough topography formed by arrays of uniform individual Ag nanoparticles. Abundant “hot spots” with greatly enhanced local electromagnetic field are promoted densely on the mesocage surface by the plenty of deep and narrow gaps and the hollow structure. The single‐particle SERS signal generated by the Ag mesocage has an enhancement factor of approximately 10⁹, which is approximately four times higher than the Ag mesocage synthesized using single‐crystal Ag₂O particle as a template. Meanwhile, this signal displays a linear dependence on the detected analyte concentration, sensitively down to 1.0 × 10^?12 m .     

银纳米颗粒阵列的表面增强拉曼散射效应研究

利用具有高密度拉曼热点的金属纳米结构作为表面增强拉曼散射(SERS)基底,可以显著增强吸附分子的拉曼信号.本文通过阳极氧化铝模板辅助电化学法沉积制备了高密度银(Ag)纳米颗粒阵列;利用扫描电子显微镜和反射谱表征了样品的结构形貌和表面等离激元特性;用1, 4-苯二硫醇(1, 4-BDT)为拉曼探针分子,研究了Ag纳米颗粒阵列的SERS效应.通过优化沉积时间,制备出高SERS探测灵敏度的Ag纳米颗粒阵列,检测极限可达10~(-13)mol/L;时域有限差分法模拟结果证实了纳米颗粒间存在强的等离激元耦合作用,且发现纳米颗粒底端的局域场增强更大.研究结果表明Ag纳米颗粒阵列可作为高效的SERS基底.     

Enhancements in intensity and thermal stability of Raman spectra based on roughened gold substrates modified by underpotential deposition of silver

In this study, electrochemically roughened gold is modified with underpotential deposition (UPD) silver to investigate the effects on enhancements in the intensity and the thermal stability of surface‐enhanced Raman scattering (SERS). The SERS of Rhodamine 6G (R6G) adsorbed on the UPD Ag‐modified Au substrate exhibits a higher intensity by six‐fold of magnitude, as compared with that of R6G adsorbedon the unmodified Au substrate. Moreover, the SERS enhancement capabilities of UPD Ag‐modified Au and unmodified Au substrates are seriously depressed at temperatures higher than 200 and 150 °C, respectively. It indicates that the modification of UPD Ag can significantly depress the thermal destruction of SERS‐active substrates. Copyright © 2009 John Wiley & Sons, Ltd.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Large‐area Ag nanorod array substrates for SERS: AAO template‐assisted fabrication,functionalization, and application in detection PCBs

Highly ordered arrays of thiolated β‐cyclodextrin (HS‐β‐CD) functionalized Ag‐nanorods (Ag‐NRs) with plasmonic antennae enhancement of electrical field have been achieved for encapsulation and rapid detection of polychlorinated biphenyls (PCBs). The large‐area ordered arrays of rigid Ag‐NRs supported on copper base were fabricated via porous anodic aluminum oxide (AAO) template‐assisted electrochemical deposition. The inter‐nanorod gaps between the neighboring Ag‐NRs were tuned to sub‐10 nm by thinning the pore‐wall thickness of the AAO template using diluted H₃PO₄. The nearly perfect large‐area ordered arrays of Ag‐NRs supported on copper base render these systems excellent in surface‐enhanced Raman scattering (SERS) performance with uniform electric field enhancement, as testified by the SERS spectra and Raman mappings of rhodamine 6 G. Furthermore, the Ag‐NRs were functionalized with HS‐β‐CD molecules so as to capture the apolar PCB molecules in the hydrophobic cavity of the CD. Compared to the ordinary undecorated SERS substrates, the HS‐β‐CD modified Ag‐NR arrays exhibit better capture ability and higher sensitivity in rapid detection of PCBs. Copyright © 2012 John Wiley & Sons, Ltd.     

A high‐throughput method for controlled hot‐spot fabrication in SERS‐active gold nanoparticle dimer arrays

We present a high‐throughput method for fabricating large arrays of surface‐enhanced Raman scattering (SERS) active gold dimers. Using a large‐area/low‐cost nanopatterning method in conjunction with a meniscus force deposition technique, we were able to create large arrays of uniformly spaced nanoclusters comprising two 60‐nm gold nanospheres. Raman measurements of a thiophenol monolayer deposited on smaller scale arrays of aligned dimers yielded enhancement factors as high as 10⁹. Polarization‐controlled measurements show spectral peak heights to be 10–100 times smaller when the incident beam is polarized perpendicularly to the dimer axis, confirming that the measured enhancements arise from the ‘hot spots’ between the two nanospheres. Copyright © 2009 John Wiley & Sons, Ltd.     

Silver‐coated inverse opals formed from polystyrene spheres for surface‐enhanced Raman scattering

We have developed a new substrate for surface‐enhanced Raman scattering (SERS) measurements involving a thin silver layer deposited over an ion‐etched TiO₂ inverse opal. The latter is formed by chemically infiltrating a polystyrene opal array with TiO₂ followed by a thermal decomposition of the spheres. The SERS response of the these substrates is examined for several sphere sizes and lasers wavelengths; the results show that such substrates yield high enhance factors, comparable to substrates involving a silver layer deposited directly on a polystyrene opal array. Copyright © 2010 John Wiley & Sons, Ltd.     

Adsorption of neurotensin‐family peptides on SERS‐active Ag substrates

Kinetensin (KN) and its amino acids 1–8 fragment ([des‐Leu⁹]KN), neuromedin N (NMN), and xenopsin (XP) and its two analogs (XP‐1 and XP‐2) belong to the neurotensin family of peptides and are known to stimulate the growth of human tumors. In this work, we report Fourier transform‐Raman and surface‐enhanced Raman scattering (SERS) studies of these peptides and discuss their structures, orientation, and mode of adsorption onto a highly specific, electrochemically roughened SERS‐active Ag electrode that is characterized by the formation of a 50–150 nm Ag island on its surface. We show that the investigated peptides bind preferentially to this surface by substantial electronic overlap between the metal surface and the π‐orbitals of the benzene rings of the Phe, Tyr, and Trp residues, which forces them to take parallel or almost parallel orientations with respect to the surface. In addition, the –CH₂–, –CNH₂, and –COO^‐ molecular fragments are involved in interactions with (binding to or in close proximity with) the Ag surface. The SERS data show that the adsorption modes in each of these cases are very similar. In addition, we show that the specific differences in the amino acid sequences do not significantly affect the orientation of the investigated peptides on the Ag substrate. This result implies that the N‐termini of the neurotensin‐family peptides do not influence the mode for adsorption onto the Ag substrates. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering investigations on silver nanoparticles deposited on alumina and titania nanotubes: influence of the substrate material on surface‐enhanced Raman scattering activity of Ag nanoparticles

Silver nanoparticles deposited on various ‘inert’ porous materials (mainly Al₂O₃ and TiO₂) are often used as substrates for surface‐enhanced Raman scattering (SERS) measurements. In this study, we used the sputter deposition technique to cover tubular arrays of Al₂O₃ and TiO₂ with Ag nanoparticles. Raman spectra of pyridine (as a probe molecule) and of two selected dyes (5‐(4‐dimethylaminobenzylidene)rhodanine and 5‐(4‐(dimethylamino)benzylidene)‐3‐(3‐methoxypropyl)rhodanine) adsorbed on fabricated Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al substrates were measured. We found that the SERS spectra of pyridine adsorbed on Ag nanoparticles deposited on an Al₂O₃‐n/Al substrate are distinctly different from those measured for an Ag/TiO₂‐n/Ti composite. Similar effects were observed for dyes adsorbed on the surface of both composites. The spectral differences between two kinds of composites (Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al) are discussed in terms of (1) the modified electronic structure of the Ag nanoparticles due to their interaction with different substrate materials and (2) the different atomic topology of the metal particles thus deposited on the surfaces of the substrates. Composite samples were also studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Copyright © 2012 John Wiley & Sons, Ltd.     

Induced SERS activity in Ag@SiO2/Ag core‐shell nanosphere arrays with tunable interior insulator

In this work, we demonstrated a bottom‐up growth of Ag@SiO₂/Ag core‐shell nanosphere arrays with tunable SiO₂ interior insulator and the optimized surface‐enhanced Raman scattering (SERS) substrate based on a nanostructure performed with both high sensitivity and large‐area uniformity. Their morphological, structural, and optical properties were characterized, and the induced SERS activities were investigated theoretically by the FDTD simulation and experimentally using analyte molecules. An ultrathin SiO₂ shell with tunable thickness can be synthesized pinhole‐free by a chemical vapor deposition, working as an interior insulator between the Ag core and Ag out‐layer coating. A detection limit as low as 10⁻¹² M and an enhancement factor up to 3 × 10⁷ were obtained, and the SERS signal was highly reproducible with small standard deviation. The method opened up a way to create a new class of SERS activity sensor with high‐density ‘hot spots’, and it may play an important role in device design and the corresponding biological and food safety monitoring applications. Copyright © 2016 John Wiley & Sons, Ltd.     

Silver‐decorated carbon nanotube networks as SERS substrates

We report on investigations upon a surface‐enhanced Raman scattering (SERS) substrate produced from a two‐dimensional single‐walled carbon nanotube (SWNT) network decorated with Ag nanoparticles. Using the strong and unique Raman spectrum of SWNTs as a reference, the SWNT/Ag nanostructure can be considered to provide two regions: one with an ultrasensitive SERS response for single‐molecule SERS (SMSERS) study; and another with uniform SERS enhancement over an area of several square millimeters for general SERS measurements. We report the appearance of an anomalous Raman feature at around 2180 cm⁻¹ in the high‐sensitivity region which exhibits the characteristics of SMSERS. The SERS performance of the uniform area was characterized using pyridine vapor adsorbed onto the substrate. The presence of the SWNT/Ag nanostructure enhanced the Raman intensity by over seven orders of magnitude, a factor comparable to or exceeding that obtained on SERS substrates reported by other groups. The results indicate great potential to produce highly sensitive, uniform SERS substrates via further fine‐tuning of the nanostructure. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface-enhanced Raman spectroscopy based on ordered nanocap arrays

We fabricated the Ag cap array for surface-enhanced Raman scattering (SERS) by Ag deposition onto two dimensional polystyrene colloid sphere templates, and 4-mercaptopyridine (4-MPy) was used as the probing molecule. When the colloids with different size were chosen as the substrate for 20 nm Ag deposition, the film on 100 nm colloids gave the significant enhancement. SERS intensity increased with the increase of Ag thickness. When 20 nm Ag film was coated by Ta, the SERS signals decreased with the increase of Ta thickness, indicating the main effect from the top of cap structure. When Co layer was added under the Ag film, the SERS intensity decreased with the increase of Co thickness because the Co layer affects electromagnetic and plasmon resonance.     

Visible light response of silver 4‐aminobenzenethiolate and silver 4‐dimethylaminobenzenethiolate probed by Raman scattering spectroscopy

Silver thiolate is a layered compound with a Raman spectrum that is known to change with time, becoming the same as the surface‐enhanced Raman scattering (SERS) spectrum of the parent thiol molecule adsorbed on Ag nanoparticles. On this basis, the Raman scattering characteristics of silver 4‐aminobenzenethiolate (Ag‐4ABT) compounds were investigated to determine whether certain peaks that are identifiable in the SERS spectrum of 4‐aminobenzenethiol (4‐ABT) but absent in its normal Raman spectrum were also apparent in the Ag salt spectrum. For comparative purposes, the Raman scattering characteristics of silver 4‐dimethylaminobenzenethiolate (Ag‐4MABT) were also examined. Raman spectra acquired while spinning the sample were typified by only a₁‐type vibrational bands of Ag‐4ABT and Ag‐4MABT, whereas in the static condition, several non‐a₁‐type bands were identified. The spectral patterns acquired in the static condition were similar to the intrinsic SERS spectra of 4‐ABT or 4‐dimethylaminobenzenethiol (4‐MABT) adsorbed on pure Ag nanoparticles. Notably, the CH₃ group vibrational bands were observable for Ag‐4MABT irrespective of the sample rotation. In addition, no decrease in intensity during irradiation with a visible laser was observed for any of the bands, suggesting that no chemical conversion actually took place in either 4‐ABT or 4‐MABT. The preponderance of evidence led to the conclusion that the non‐a₁‐type bands observable in the SERS spectra must be associated with the chemical enhancement mechanism acting on the Ag nanoparticles. The chemical enhancement effect was more profound at 514.5 nm than at 632.8 nm, and was more favorable for 4‐ABT than 4‐MABT at both wavelengths. Copyright © 2012 John Wiley & Sons, Ltd.     

基于气相沉积等离激元纳米粒子/三维石墨烯-镍泡沫复合结构的高灵敏度表面增强拉曼检测

本文提出一种基于气相沉积银纳米粒子和三维石墨烯-镍泡沫的复合等离激元结构.该结构是利用气相纳米团簇束流技术将高密度的银纳米粒子直接沉积于三维石墨烯-镍泡沫的表面制备而成.与传统银纳米结构相比,复合三维等离激元纳米结构具有"热点"数量多,局域场更强的特点,可作为基于表面增强拉曼技术的高灵敏度化学传感器.拉曼测试实验结果表明,该三维纳米结构在表面增强拉曼检测中可获得灵敏度高,重复性好的探针拉曼信号.通过进一步的理论模拟,发现该三维等离激元结构中增强的拉曼信号主要归因于纳米粒子与纳米粒子之间以及纳米粒子与石墨烯-镍泡沫衬底之间的多重近场耦合效应.     

Size‐dependent SERS enhancement of colloidal silver nanoplates: the case of 2‐amino‐5‐nitropyridine

Surface‐enhanced Raman scattering (SERS) spectra of 2‐amino‐5‐nitropyridine (ANP) adsorbed on colloidal silver triangular nanoplates were obtained using samples with different mean sizes and surface plasmon frequencies. The relative SERS enhancement factor for each sample was determined by the analysis of the normalized SERS excitation profiles of ANP vibrational modes for nanoplates in suspension, without aggregation. The SERS profiles are blue‐shifted in relation to the localized surface plasmon peak. The detailed characterization of both morphology and concentration of the samples in addition to a rigorous normalization of the SERS spectra allowed a quantitative correlation between the SERS profiles and the mean size of the nanoplates. This correlation indicated the existence of an optimum size of the nanoplates for maximum Raman enhancement. Copyright © 2008 John Wiley & Sons, Ltd.     

The SERS response of semiordered Ag nanorod arrays fabricated by template oblique angle deposition

Semiordered Ag nanorod arrays are fabricated by template oblique angle deposition (OAD) using regular Au nano‐post arrays with different diameters as seed patterns. The Au nano‐post arrays do not give an observable surface‐enhanced Raman scattering (SERS) activity under our detection configuration, whereas the patterned Ag nanorod arrays can produce a very strong SERS signal. These SERS intensities increase monotonically with the decrease in the diameter and separation of the Ag nanorods, which demonstrates that one can improve the SERS detection by tuning the diameter and separation of the Ag nanorods, and the template OAD method can help produce more uniform, reproducible, and sensitive Ag nanorod SERS substrates. Copyright © 2010 John Wiley & Sons, Ltd.     

A three‐dimensional surface‐enhanced Raman scattering substrate: Au nanoparticle supramolecular self‐assembly in anodic aluminum oxide template

A three‐dimensional surface‐enhanced Raman scattering (SERS) substrate via the self‐assembly of properly sized Au nanoparticles in anodic aluminum oxide templates was designed and prepared. Au nanoparticles first underwent hydrophobic surface modification. Then, the hydrophobic Au nanoparticles self‐assembled, aggregated and formed many hot spots in the anodic aluminum oxide templates through a supramolecular interaction. We chose thiophenol as a probe molecule to evaluate the SERS enhancement ability of this three‐dimensional substrate. The enhancement factor was calculated to be 4.6 × 10⁶ under the radiation of a 785‐nm laser. By further comparing SERS signals from different points on the same substrate, we confirmed that this substrate possessed good reproducibility and could be applied for SERS detection. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of NIR‐Excitable SERS‐Active Composite Particles Composed of Densely Packed Au Nanoparticles on Polymer Microparticles

A simple fabrication method is demonstrated for surface‐enhanced Raman scattering (SERS)‐active plasmonic nanoballs, which consisted of Au nanoparticles (NPs) and core–shell polystyrene and amino‐terminated poly(butadiene) particles, by heterocoagulation and Au NP diffusion. The amount of Au NPs introduced into the core–shell particles increases with the concentration of Au NPs added to the aqueous dispersion of the core–shell particles. When the amount of Au NPs increases, closely packed, three‐dimensionally arranged and close‐packed Au NPs arrays are formed in the shells. Strong SERS signals from para‐mercaptophenol adsorbed onto composite particles with multilayered Au NPs arrays are obtained by near‐infrared (NIR) light illumination.     

The distributions of enhancement factors in close‐packed and nonclose‐packed surface‐enhanced Raman substrates

A method employing photochemical hole burning, previously developed to measure the distribution of Raman enhancement factors on a nanostructured substrate for surface‐enhanced Raman scattering, is used to compare the enhancement distributions of benzenethiol adsorbed on substrates optimized for 532 nm laser excitation consisting of close‐packed (CP) or nonclose‐packed (NCP) nanospheres. The ensemble‐averaged Raman enhancement factor was 2.8 times smaller for the NCP substrate. The measured distributions revealed additional information. For instance, 92% of the molecules on the CP substrate and 93.6% of the molecules on the NCP substrate had Raman enhancements below average. The minimum enhancements on both substrates were ~10⁴, but on the NCP substrate the maximum enhancement was 1.2 × 10⁸, whereas on the CP substrate the maximum was 2 × 10¹⁰. The Ag‐coated nanospheres form hemisphere‐on‐cylinder mushroom‐like structures on both lattices, but on the NCP lattice, one third of the molecules are on the flat regions between the mushrooms. The flats on the NCP lattice have enhancements of ~10⁴, showing they are part of a resonant plasmonic structure. The highest NCP enhancements of ~10⁸ are tentatively associated with regions at the bases of the mushrooms, whereas the highest CP enhancements of 2 × 10¹⁰ are tentatively associated with gaps between nanospheres where 0.0025% of the molecules reside. Copyright © 2011 John Wiley & Sons, Ltd.