Near‐field optical enhancement by lead‐sulfide quantum dots and metallic nanoparticles for SERS

There is a growing interest in using quantum dots (QDs) and metallic nanoparticles (NPs), both for luminescence enhancement and surface‐enhanced Raman scattering (SERS). Here, we study the electromagnetic‐field enhancement that can be generated by lead‐sulfide (PbS) QDs using three‐dimensional finite‐element simulations. We investigate the field enhancement associated with combinations of PbS QDs with metallic NPs and substrates. The results show that high field enhancement can be achieved by combining PbS QDs with metallic NPs of larger sizes. The ideal size for Ag NPs is 25 nm, providing a SERS enhancement factor of ~5*10⁸ for light polarization parallel to the NP dimer axis and a gap of 0.6 nm. For Au NPs, the bigger the size, the higher is the field for the studied diameters, up to 50 nm. The near‐field values for PbS QDs above metallic substrates were found to be lower compared to the case of PbS QD‐metal NP dimers. This study provides the understanding for the design and application of QDs for the enhancement of near‐field phenomena. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering within silver‐nanoparticle‐decorated nanometric apertures

An analytical approach using enhanced Raman spectroscopy to record molecular vibrations and associated molecular images within nanometric apertures is presented, which can essentially rival or surpass its counterparts, i.e. fluorescence microscopy, by providing unique structure‐specific information forward to chemical identification and structure elucidation. Utilizing a precise nanolithographic technology and the following chemically electroless silver deposition procedure, we deliberately construct the large scale zero‐mode waveguide array in gold film with embossed silver nanostructures on the bottom of nanowells capable of acquiring enhanced Raman spectra with substantial sensitivity and high chemical fidelity. Two chemicals, aminothiophenol (4‐ATP) and Rhodamine 6G, respectively, are employed as molecular indicators to successfully demonstrate the capability of this analytical strategy by exhibiting high‐quality Raman spectra and 2D chemical‐specific images. With a high magnitude objective (60×), we enable to acquire Raman spectra from a single nanometric aperture and quantitatively determine a peak enhancement factor of 3.63 × 10⁵ for ATP, while 1.25 × 10⁶ to Rhodamine 6G, comparable with a regular nanoparticle‐based surface‐enhanced Raman spectroscopy‐active substrate. Overall, the compelling characteristics of this detection scheme highlight its privileges for interrogating the individual molecular behavior in extremely confined geometry and illustrating the chemical insights of trace components without any labeling reagent and extra sample preparation. Copyright © 2013 John Wiley & Sons, Ltd.     

Direct visual evidence for the chemical mechanism of surface‐enhanced resonance Raman scattering via charge transfer

We describe the chemical and electromagnetic enhancements of surface‐enhanced resonance Raman scattering (SERRS) for the pyridine molecule absorbed on silver clusters, in which different incident wavelength regions are dominated by different enhancement mechanisms. Through visualization we theoretically investigate the charge transfer (CT) between the molecule and the metal cluster, and the charge redistribution (CR) within the metal on the electronic intracluster collective oscillation excitation (EICOE). The CT between the metal and the molecule in the molecule–metal complex is considered as an evidence for chemical enhancement to SERRS. CR within the metal on EICOE is considered as an evidence for the electromagnetic enhancement by collective plasmons. For the incident wavelength from 300 to 1000 nm, the visualized method of charge difference density can classify the different wavelength regions for chemical and electromagnetic enhancement, which are consistent with the formal fragmented experimental studies. Copyright © 2008 John Wiley & Sons, Ltd.     

Multiscale electromagnetic SERS enhancement on self‐assembled micropatterned gold nanoparticle films

In this work, we demonstrate a cascaded, multiplicative electromagnetic enhancement effect in surface‐enhanced Raman scattering (SERS) on periodically micropatterned films made of colloidal gold nanoparticles, prepared by a self‐assembly approach, without implying lithography procedures. The multiplicative enhancement effect is obtained by combining surface plasmon near‐field enhancement due to nanoscale features with far‐field photonic coupling by periodic microscale features. The effect is observed for both internal Raman reporters (molecules attached to the Au colloids before their assembly) and external Raman probes (molecules adsorbed on the samples after film assembly). The ability of the patterned films for far‐field light coupling is supported by reflectivity spectra, which present minima/maxima in the visible spectral range. Finite‐difference time‐domain computer simulations of the electric field distribution also support this interpretation. The fabricated dual‐scale SERS substrates exhibit a good spot‐to‐spot reproducibility and time stability, as proved by the SERS response over a time scale longer than 1 month. The experimental demonstration of this cascaded electromagnetic enhancement effect contributes to a better understanding of SERS and can affect future design of SERS substrates. Moreover, such dual‐scale colloidal films prepared by convective self‐assembly can be of general interest for the broader field of nanoparticle‐based devices. Copyright © 2014 John Wiley & Sons, Ltd.     

Metal‐nanoparticle‐coating‐induced enhancement and weakening of resonant Raman scattering in ZnO: effect of surface electric field

Effects of Ag and Ti nanoparticle coatings on resonant Raman scattering in various ZnO thin films are presented. The longitudinal optical (LO) phonons, irrespective of the ZnO quality, exhibit an enhancement and a weakening by the Ag and Ti nanoparticle coatings, respectively. The enhancement (weakening) is always accompanied by a reduced (an increased) intensity ratio of the second to first‐order LO phonons, which can be associated with changes in the electron‐phonon coupling strength in the probed area of ZnO. Angle‐resolved X‐ray photoelectron spectroscopy provides evidence for the bending of the surface energy bands and their changes induced by the metal coatings. The effect of metal nanoparticle coatings on the Raman scattering of ZnO is thus attributed to the changes in the surface electric field. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering on colloid gels originated from low molecular weight gelator

Surface‐enhanced Raman scattering (SERS) on silver and gold colloid gels formed by a low molecular weight organic gelator, bis‐(S‐phenylalanine) oxalyl amide, was obtained. Strong Raman signals dominate in the SERS spectra of hydrogels containing silver nanoparticles prepared by citrate and borohydride reduction methods, whereas broad bands of low intensity are detected in the spectra of gold colloid gels. Resemblance between Raman spectrum of the crystalline substance and the SERS spectra of the silver nanoparticle–hydrogel composites implies the electromagnetic nature of the signal enhancement. A change in Raman intensity of the benzene and amide II bands caused by an increase in temperature and concentration indicates that the gelling molecules are strongly attached through the benzene moieties to the metal nanoparticles while participating in gel formation by intermolecular hydrogen bonding between the adjacent oxalyl amide groups. Transmission electron microscopy reveals a dense gel structure in the close vicinity of the enhancing metal particles for both silver colloid gels. Copyright © 2008 John Wiley & Sons, Ltd.     

Design of plasmonic bowtie nanoring array with high sensitivity and reproducibility for surface‐enhanced Raman scattering spectroscopy

A metallic bowtie nanoring array is designed to gain high sensitive and reproducible substrate for surface‐enhanced Raman scattering (SERS) spectroscopy. The localized surface plasmon resonance (LSPR), the electric field enhancement factors (EFs) and the electric field distribution of the bowtie and bowtie nanoring array are numerically investigated by means of the finite‐difference time domain (FDTD) method. After the optimization of the particle size and the array period, the maximum electromagnetic field EF approaches 153, and the corresponding SERS electromagnetic enhancement factor (EMEF) reaches 5.4 × 10⁸. This highly sensitive and reproducible substrate can be a good candidate for SERS applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Exploring the origin of tip‐enhanced Raman scattering; preparation of efficient TERS probes with high yield

Tip‐enhanced Raman scattering (TERS) spectroscopy is a promising technique for nanoscale chemical analysis. However, there are several challenges preventing widespread application of this technology, including reproducible fabrication of efficient TERS probes. These problems reflect a lack of clear understanding of the origins of, and the parameters influencing TERS. It is believed that the coating characteristics at the apex of the tip have a major effect on the near‐field optical enhancement and thus the TERS activity of a metalized probe. Here we show that the aspect ratio of the tip can play a significant role in the efficiency of TERS probes. We argue that the electrostatic field arising from the lightning‐rod effect has a substantial role in the observed TERS effect. This argument is supported by ‘edge‐enhanced Raman scattering’ which is shown for a noble metal film. Furthermore, it is reported that an associated tip‐surface‐enhanced Raman scattering effect can be achieved by using a TERS‐inactive metalized probe on a surface‐enhanced Raman spectroscopy‐inactive roughened surface. This observation can be explained by an interparticle enhancement of the electromagnetic field. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of surface morphology on surface‐enhanced Raman scattering of 4‐aminobenzenethiol adsorbed on gold substrates

The substrate‐dependent surface‐enhanced Raman scattering (SERS) of 4‐aminobenzenethiol (4‐ABT) adsorbed on Au surfaces has been investigated. 4‐ABT is one of the very unique adsorbate molecules whose SERS spectral patterns are known to be noticeably dependent on the relative contribution of chemical enhancement mechanism vs electromagnetic enhancement mechanism. The SERS spectral patterns of 4‐ABT adsorbed on gold substrates with various surface morphology have thus been analyzed in terms of the symmetry types of the vibrational modes. Almost invisibly weak b₂ type vibrational bands were observed in the SERS spectra of the 4‐ABT adsorbed on Au colloidal sol nanoparticles or commercially available Au micro‐powders because of the weak contribution of the chemical enhancement. However, greatly enhanced b₂ vibrational bands were observed in the spectra of the 4‐ABT molecules adsorbed on the synthesized Au(Zn) sponge or the electrochemically roughened Au(ORC) foil caused by the strong contribution of the chemical enhancement mechanism. Copyright © 2008 John Wiley & Sons, Ltd.     

Visible light response of silver 4‐aminobenzenethiolate and silver 4‐dimethylaminobenzenethiolate probed by Raman scattering spectroscopy

Silver thiolate is a layered compound with a Raman spectrum that is known to change with time, becoming the same as the surface‐enhanced Raman scattering (SERS) spectrum of the parent thiol molecule adsorbed on Ag nanoparticles. On this basis, the Raman scattering characteristics of silver 4‐aminobenzenethiolate (Ag‐4ABT) compounds were investigated to determine whether certain peaks that are identifiable in the SERS spectrum of 4‐aminobenzenethiol (4‐ABT) but absent in its normal Raman spectrum were also apparent in the Ag salt spectrum. For comparative purposes, the Raman scattering characteristics of silver 4‐dimethylaminobenzenethiolate (Ag‐4MABT) were also examined. Raman spectra acquired while spinning the sample were typified by only a₁‐type vibrational bands of Ag‐4ABT and Ag‐4MABT, whereas in the static condition, several non‐a₁‐type bands were identified. The spectral patterns acquired in the static condition were similar to the intrinsic SERS spectra of 4‐ABT or 4‐dimethylaminobenzenethiol (4‐MABT) adsorbed on pure Ag nanoparticles. Notably, the CH₃ group vibrational bands were observable for Ag‐4MABT irrespective of the sample rotation. In addition, no decrease in intensity during irradiation with a visible laser was observed for any of the bands, suggesting that no chemical conversion actually took place in either 4‐ABT or 4‐MABT. The preponderance of evidence led to the conclusion that the non‐a₁‐type bands observable in the SERS spectra must be associated with the chemical enhancement mechanism acting on the Ag nanoparticles. The chemical enhancement effect was more profound at 514.5 nm than at 632.8 nm, and was more favorable for 4‐ABT than 4‐MABT at both wavelengths. Copyright © 2012 John Wiley & Sons, Ltd.     

Metal–organic frameworks: a novel SERS substrate

We report the direct observation of surface‐enhanced Raman scattering (SERS) effect using metal–organic frameworks (MOFs) as substrates. Without the aid of any metal colloids or enhancing agents, the SERS signals of methyl orange (MO) adsorbed in MOFs were observed and even remained active if the organic linkers in MOFs were completely removed by high temperature and O₂ plasma treatments. It implies that the SERS active site is at the metal oxide clusters. The ultraviolet‐visible spectra of MO, MOFs, and MO–MOF complexes show that absorption peaks are far from laser excitation line. Thus, conventional resonance enhancement effect should be ruled out, and charge‐transfer mechanism is the most likely scenario responsible for the observed SERS effect. Density functional theory (DFT) was used to interpret the chemical enhancement mechanism and the adsorption orientation‐dependent SERS spectra in our observation. The preferred adsorption orientations calculated by DFT method are consistent with the observed SERS results. Copyright © 2013 John Wiley & Sons, Ltd.     

Structural and vibrational study of 2‐(2′‐ furyl)‐4,5‐1H‐dihydroimidazole

In this study 2‐(2′‐furyl)‐4,5‐1H‐dihydroimidazole (1) was prepared and then characterized by infrared, Raman, and multidimensional nuclear magnetic resonance (NMR) spectroscopies. The crystal and molecular structures of 1 were determined by X‐ray diffraction methods. The density functional theory (DFT) and second‐order Møller–Plesset theory (MP2) with Pople's basis set show that there are two conformers for the title molecule that have been theoretically determined in the gas phase, and that only one of them, conformer I, is present in the solid phase. NMR spectra observed for 1 were successfully compared with the calculated chemical shifts at the B3LYP/6‐311++G** level theorized for this conformer. The harmonic vibrational frequencies for the optimized geometry of the latter conformer were calculated at the B3LYP/6‐311++G** level in the approximation of the isolated molecule. For a complete assignment of the IR and Raman spectra in the solid phase of 1 , DFT calculations were combined with Pulay´s scaled quantum mechanics force field (SQMFF) methodology to fit the theoretical frequency values to the experimental ones. Copyright © 2009 John Wiley & Sons, Ltd.     

Direct visual evidence for the chemical mechanism of surface‐enhanced resonance Raman scattering via charge transfer: (II) Binding‐site and quantum‐size effects

We describe quantum‐size and binding‐site effects on the chemical and local field enhancement mechanisms of surface‐enhanced resonance Raman scattering (SERRS), in which the pyridine molecule is adsorbed on one of the vertices of the Ag₂₀ tetrahedron. We first investigated the influence of the binding site on normal Raman scattering (NRS) and excited state properties of optical absorption spectroscopy. Second, we investigated the quantum‐size effect on the electromagnetic (EM) and chemical mechanism from 300 to 1000 nm with charge difference density. It is found that the strong absorption at around 350 nm is mainly the charge transfer (CT) excitation (CT between the molecule and the silver cluster) for large clusters, which is the direct evidence for the chemical enhancement mechanism for SERRS; for a small cluster the strong absorption around 350 nm is mainly intracluster excitation, which is the direct evidence for the EM enhancement mechanism. This conclusion is further confirmed with the general Mie theory. The plasmon peak in EM enhancement will be red‐shifted with the increase of cluster size. The influence of the binding site and quantum‐size effects on NRS, as well as chemical and EM enhancement mechanisms on SERRS, is significant. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterizing unusual metal substrates for gap‐mode tip‐enhanced Raman spectroscopy

In this article, the electromagnetic (EM) field in gap‐mode tip‐enhanced Raman spectroscopy (TERS) is investigated theoretically and experimentally for a range of commonly used and unusual metal and nonmetal substrates. By approaching a metal tip to a substrate, both form a coupled system that confines the EM field created at the tip apex. The influence of the substrate onto the EM field enhancement is observed in a top‐illumination gap‐mode TERS setup for different metal substrates. These include Au, the most commonly used substrate, and also a wide range of rarely or previously unused TERS substrates (Cu, Ag, Al, Pd, Pt, Ni, Ti, Mo, W, stainless steel, Al₂O₃, SiO₂). Self‐assembled monolayers of thiols and brilliant cresyl blue thin film samples are investigated experimentally on nine metal substrates, all showing considerable TERS enhancement. With finite difference time domain and finite element simulations used, the article provides a good estimate of the EM field enhancement for a wide range of substrates for users to estimate how well a substrate of choice will perform in a gap‐mode TERS experiment. The reduction in EM field strength |E²| compared with Au is less than an order of magnitude for many metals (Calculations: Cu 92%, Ag 81%, Ni 53%). This article experimentally shows that a wide variety of conductive substrates can be used, when one is willing to trade a fraction of the EM field enhancement. TERS was seen on all metal substrates including stainless steel, yet quantification was not always possible. These qualitative results were complemented with intensities from calculations. The wider variety of substrates will increase the applicability of TERS and evolve it one step further towards use in standard analytics. Copyright © 2012 John Wiley & Sons, Ltd.     

Halide‐ion‐assisted increase of surface‐enhanced hyper‐Raman scattering: a clear observation of the chemical effect

We show that the increase of surface‐enhanced hyper‐Raman scattering (SEHRS) intensity of organic dye molecules adsorbed on single silver (Ag) colloid aggregate in the presence of halide ions is a direct evidence of the chemical effect in the enhancement mechanism. Time‐dependent SEHRS measurements before and after adding halide ions enabled us to distinctly observe the chemical effect. The presence of the halide ions results to a more stable chemical interaction between metal and dye molecule, making it more resistant against photodegradation effects. This study can contribute in elucidating the chemical effect mechanism and aid in the development of SEHRS as a useful spectroscopic tool. Copyright © 2008 John Wiley & Sons, Ltd.     

Potential‐induced Raman behavior of individual (R)‐di‐2‐naphthylprolinol molecules on a Ag‐modified Ag electrode

The applicability of surface‐enhanced Raman spectroscopy is demonstrated to probe the adsorption behavior of individual molecules on a Ag electrode. High‐quality SERS spectra of (R)‐di‐2‐naphthylprolinol (DNP) were obtained from ultradilute solutions (10⁻¹² M ) on the Ag‐nanoparticle‐modified Ag electrode, which is attributed to the high electromagnetic (EM) effect of the SERS‐active system as well as to the strong adsorption and interaction of DNP molecules with Ag. The stable SERS spectra present remarkable potential dependence, which gives evidence for the behavior of individual DNP molecules on the Ag surface. Based on statistical analysis for the probability of DNP molecules located in ‘hot spots’, we propose an SERS mechanism for individual molecules in the electrode system, in combination with the hot‐spot model and orientation of the probe molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman,infrared, SERS and theoretical study of 3‐(1‐phenylpropan‐2‐ylamino) propanenitrile,fenproporex

Infrared, Raman and surface‐enhanced Raman scattering (SERS) spectra of 3‐(1‐phenylpropan‐2‐ylamino)propanenitrile (fenproporex) have been recorded. Density functional theory (DFT) with the B3LYP functional was used for optimizations of ground state geometries and simulation of Raman and SERS vibrational spectra of this molecule. Bands of the vibrational spectra were assigned in detail. The comparison of SERS spectra obtained by using colloidal silver and gold nanoparticles with the corresponding Raman spectrum reveals enhancement and shifts in bands, suggesting a possible partial charge‐transfer mechanism in the SERS effect. Information about the orientation of fenproporex on the nanometer‐sized metal structures is also obtained. Copyright © 2011 John Wiley & Sons, Ltd.     

Structural and vibrational analyses of 2‐(2‐benzofuranyl)‐2‐imidazoline

We have studied 2‐(2‐benzofuranyl)‐2‐imidazoline (BFI) and characterized it by using infrared and Raman spectroscopies. The density functional theory (DFT) method together with Pople's basis set shows that two conformers exist for the title molecule as have been theoretically determined in the gas phase and that, probably, an average of both conformations is present in the solid phase. The harmonic vibrational wavenumbers for the optimized geometry of the latter conformer were calculated at the B3LYP/6‐31G* level in the proximity of the isolated molecule. For a complete assignment of the IR and Raman spectra in the compound in the solid phase, DFT calculations were combined with Pulay's scaled quantum mechanics force field (SQMFF) methodology in order to fit the theoretical wavenumbers to the experimental ones. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman and surface‐enhanced Raman spectroscopic studies of the 15‐mer DNA thrombin‐binding aptamer

Aptamers are single‐stranded oligonucleotides that selectively bind to their target molecules owing to their ability to form secondary structures and shapes. The 15‐mer (5′‐GGTTGGTGTGGTTGG‐3′) DNA thrombin‐binding aptamer (TBA) binds to thrombin following the formation of a quadruplex structure via the Hoogsten‐type G–G interactions. In the present study, Raman and SERS spectra of TBA and thiolated TBA (used to facilitate covalent bonding to metal nanoparticle) in different conditions are investigated. The spectra of the two analogs exhibit vibrations, such as the C8N7 H2 deformation band at ∼1480 cm⁻¹ of the guanine tetrad, that are characteristic of the quadruplex structure in the presence of K⁺ ions or at low temperature. Interestingly, SERS spectra of the two analogs differ markedly from their respective normal Raman spectra, possibly due to changes in the conformation of the aptamer upon binding, as well as to the specific interaction of individual vibrational modes with the metal surface. In addition, the SERS spectra of the thiolated aptamer show significant changes with different concentrations, which may be due to different orientation of the molecule with respect to the metal surface. This study provides useful information for the development of label‐free aptamer‐based SERS sensors and assays. Copyright © 2009 John Wiley & Sons, Ltd.     

Molecular structure of alkali metal 4‐nitrobenzoates

The influence of lithium, sodium, potassium, rubidium, and cesium on the electronic system of the 4‐nitrobenzoic acid molecule was studied. The vibrational (FT‐IR, FT‐Raman) and NMR (¹H and ¹³C) spectra for 4‐nitrobenzoic acid salts of alkali metals were recorded. The assignment of vibrational spectra was done. Characteristic shifts of band wavenumbers and change in band intensities along the metal series were observed. Good correlation between the wavenumbers of the vibrational bands in the IR and Raman spectra for 4‐nitrobenzoates and ionic potential, electronegativity, atomic mass, and affinity of metals were found. The chemical shifts of protons and carbons (¹H, ¹³C NMR) in the series of studied alkali metal 4‐nitrobenzoates were observed too. Optimized geometrical structures of studied compounds were calculated by HF, B3PW91, B3LYP methods using 6‐311++G** basis set. The theoretical IR, Raman, and NMR spectra were obtained. The theoretical vibrational spectra were interpreted by means of potential energy distributions (PEDs) using VEDA 3 program. The calculated parameters were compared to experimental characteristic of studied compounds. Copyright © 2007 John Wiley & Sons, Ltd.