CZE and ESI-MS of Borate-Sugar Complexes

Capillary zone electrophoresis (CZE) with electrospray ionization (ESI) mass spectrometry (MS) was used to study borate (B^?1) and sugar (L) complexes (L _x B^?1). Boric acid was adjusted to pH 10 with ammonium hydroxide to create an ESI-MS compatible CZE background electrolyte. We show for the first time that the electrophoretic peaks for each injected sugar contained both the substrates (i.e., sugar and/or multimers) and products (i.e., L _x B^?1). The effects of sheath liquid, temperature, and borate concentration were studied. The molecular mass information obtained from the ESI-MS provided new evidence on the mechanisms of borate-sugar complexation. Direct infusion ESI-MS and CZE-ESI-MS experiments strongly suggest that the formation of L _x B^?1 was from the direct reaction of a sugar or sugar multimer (L _x ) and B^?1. Larger L _x B^?1, where x > 2 were observed. Separation in the CZE dimension allows for the simultaneous analysis of a sugar mixture and simplified the ESI-MS analysis of sugars of the same molecular mass. The increase in sugar electrophoretic mobility caused by the increase in borate concentration was discussed in terms of the formation of L _x B^?1 complexes. In addition, the separation of five nucleosides by CZE using a borate electrolyte and detection using ESI-MS is demonstrated.     

Characterization of Diastereomeric Equilibria of Pseudotetrahedral Bis[(R or S)‐N‐1‐(Ar)Ethylsalicylaldiminato‐κ2N,O]zinc(II) with Λ/Δ‐Chirality‐At‐Metal Induction

A family of bis[(R or S)‐N‐1‐(Ar)ethylsalicylaldiminato‐κ²N,O]‐Δ/Λ‐zinc(II) {Ar=C₆H₅ (ZnRL¹ or ZnSL¹), p‐CH₃OC₆H₄ (ZnRL² or ZnSL²) and p‐ClC₆H₄ (ZnRL³ or ZnSL³)} compounds was synthesized and investigated by multiple methods. They feature Λ/Δ‐chirality‐at‐metal induction along the pseudo‐C ₂ axis of the molecules. The chirality induction is quantitative in the solid state, explored by X‐ray crystallography and powder X‐ray diffraction (PXRD), where R or S‐ligated complexes diastereoselectively yield Λ or Δ‐configuration at the metal. On the other hand, Λ and Δ‐diastereomers co‐exist in solution. The Λ⇆Δ equilibrium is solvent‐ and temperature‐dependent. Electronic circular dichroism (ECD) spectra confirm the existence of a diastereomeric excess of Λ‐ZnRL¹⁻³ or Δ‐ZnSL¹⁻³ in solution. DSC analysis reveals thermally induced irreversible phase transformation from a crystalline solid to an isotropic liquid phase. ECD spectra were reproduced by DFT geometry optimizations and time‐dependent DFT (TD‐DFT) calculations, providing ultimate proof of the dominant chirality atmetal in solution.     

Forces between a stiff and a soft surface

The contact between a sphere and a planar half space, one being rigid and the other elastic (or between two elastic spheres), can be described by the JKR theory of Johnson, Kendall and Roberts (Proc. R. Soc. Lond. A 1971, 324, 301). One assumption of JKR theory is that the characteristic length scale L ≈ w/E is much smaller than the radius R of the sphere; where w is the work of adhesion and E is the Young's modulus of the soft, elastic body. Relative deformations for a mechanical contact increase with increasing L and decreasing particle size R. Experiments show that up to at least L/R = 0.2, JKR theory predicts the correct dependencies between the contact radius, the indentation and the load. However, when R ≫ L is no longer satisfied, the change in total free surface area due to deformation needs to be considered. Then, elastocapillary effects start playing a significant role. In addition to discussing theory and experiments of pure solid contacts, the effect of elastic deformation on capillary and hydrodynamic forces is discussed. Finally, we consider the interaction of hollow capsules as one example of a deformable body that is still formed from a stiff material.     

Synthesis and preliminary studies on novel enantiopure crown ethers containing an alkyl diarylphosphinate or a proton-ionizable diarylphosphinic acid unit

This paper reports the synthesis, characterization and electronic circular dichroism (ECD) spectroscopic studies of a new type of crown ethers and their achiral analogues containing a tetrahedral phosphorous centre. The synthetic routes to the two chiral phosphinate derivatives [(R,R)-10 and (R,R)-11] were similar, starting from the earlier reported ethyl bis(2-hydroxyphenyl)phosphinate and the unreported methyl bis(2-hydroxyphenyl)phosphinate, respectively. The enantiopure crown ether containing phosphinic acid unit (R,R)-14 was obtained by hydrolysis of the phosphinates (R,R)-10 and (R,R)-11, respectively. ECD spectroscopy was used for investigation of the chiroptical properties as well as complex formation ability of the novel enantiopure ligands. Owing to the presence of the aryl substituents the ECD spectra are rich in bands in the ¹B_b, ¹L_a and ¹L_b regions (190-250 nm and 260-330 nm, respectively). In the case of (R,R)-14, a solvent dependent conformational behaviour was observed due to the strong dimer or aggregate forming ability of the POOH groups. This finding was supported by theoretical calculation of the monomer and the dimer forms. Phosphinates (R,R)-10 and (R,R)-11 form complexes with α-phenylethylammonium perchlorate (PEA) and α-(1-naphthyl)ethyl ammonium perchlorate (NEA) but do not discriminate between their enantiomers. All three chiral crown ethers bind strongly cations of ionic radii <∼1 Å.     

The first total synthesis and structural determination of antibiotics K1115 B1s (alnumycins)

K1115 B₁, isolated from the broth of Streptomyces species, was found to be a mixture of stereoisomers. Authors synthesized all stereoisomers of K1115 B₁ by convergent synthesis coupling a rhamnose derivative, an isobenzofuranone, and a chiral tetraol. Comparison of ¹H NMR spectra and optical rotations made it clear that the absolute structures of K1115 B_1α (the major isomer) and K1115 B_1β (the minor isomer) were (1R, 17S)- and (1R, 17R)-configurations, respectively. The optical rotations of the stereoisomers revealed that alnumycin, reported as the identical structure with K1115 B₁, might be another mixture of stereoisomers.     

Peroxidative bromination and oxygenation of organic compounds: Synthesis, X-ray crystal structure and catalytic implications of mononuclear and binuclear oxovanadium(V) complexes containing Schiffbase ligands

Treatment of of (R,R)-N,N-salicylidene cyclohexane 1,2-diamine(H₂L¹) in methanol with aqueous NH₄VO₃ solution in perchloric acid medium affords the mononuclear oxovanadium(V) complex [VOL¹(MeOH)]·ClO₄ (1) as deep blue solid while the treatment of same solution of (R,R)-N,N-salicylidene cyclohexane 1,2-diamine(H₂L¹) with aqueous solution of VOSO₄ leads to the formation of di-(μ-oxo) bridged vanadium(V) complex [VO₂L²]₂ (2) as green solid where HL² = (R,R)-N-salicylidene cyclohexane 1,2-diamine. The ligand HL² is generated in situ by the hydrolysis of one of the imine bonds of HL¹ ligand during the course of formation of complex [VO₂L²]₂ (2). Both the compounds have been characterized by single crystal X-ray diffraction as well as spectroscopic methods. Compounds 1 and 2 are to act as catalyst for the catalytic bromide oxidation and C-H bond oxidation in presence of hydrogen peroxide. The representative substrates 2,4-dimethoxy benzoic acid and para-hydroxy benzoic acids are brominated in presence of H₂O₂ and KBr in acid medium using the above compounds as catalyst. The complexes are also used as catalyst for C-H bond activation of the representative hydrocarbons toluene, ethylbenzene and cyclohexane where hydrogen peroxide acts as terminal oxidant. The yield percentage and turnover number are also quite good for the above catalytic reaction. The oxidized products of hydrocarbons have been characterized by GC Analysis while the brominated products have been characterized by ¹H NMR spectroscopic studies.     

First asymmetric synthesis of pyrrolizidine alkaloids, (+)-hyacinthacine B1 and (+)-B2

An enantiomerically and diastereomerically pure route has been developed for the first asymmetric synthesis of (1S,2R,3R,5R,7aR)- and (1S,2R,3R,5S,7aR)-1,2-dihydroxy-3,5-dihydroxymethylpyrrolizidine, hyacinthacine B₁ and B₂, featuring efficient and stereodefined elaboration via the asymmetric dihydroxylation (AD) of the functionalized homochiral pyrrolidine derivative prepared from (S)-(−)-2-pyrrolidone-5-carboxylic acid.     

Synthesis and structural characterization of a dichloro zinc complex of N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane: Application to ring opening polymerization of rac-lactide

A novel dichloro zinc complex (L¹)ZnCl₂, where L¹ is N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane, has been synthesized and characterized. The dimethyl derivatives, generated in situ from the well characterized dichloro zinc complexes (L¹)ZnCl₂ and (L²)ZnCl₂, where L² is N,N′-bis-(benzyl)-(R,R)-1,2-diaminocyclohexane, were employed as initiators for the ring opening polymerization (ROP) of rac-lactide (rac-LA). The complexes were found to be highly efficient initiators yielding the polylactide (PLA) with a narrow molecular weight distribution. The catalytic activity and heterotactic selectivity of the Zn(II) complexes were affected by the substituents on the phenyl groups of benzyl moieties in (R,R)-1,2-diaminocyclohexane. The dimethyl derivative of (L²)ZnCl₂ produced highly stereocontrolled PLA with P_r = 0.75 at −25 °C.     

Development of non-enzymatic strip for simple and selective determination of urea in water and biological samples

A simple and selective method for the determination of urea based on the paptode technique is described. The sensor was constructed by immobilizing an ionophore on a TLC strip. The procedure is based on the nucleophilic displacement of urea with tetrachloro-p-benzoquinone (chloranil) as an ionophore, and the formed violet-color product was detected using a flatbed scanner. The color of each spot was analyzed to red (R), green (G) and blue (B) values from 0 to 255 using a program written in visual basic (VB) programming language. The calibration graph obtained with the proposed sensor was linear over the range of 0.05?C10.00?mg?L^?1 with a detection limit of 0.01?mg?L^?1 for urea. Parameters such as pH and concentration of chloranil were optimized. The proposed sensor was successfully applied for the determination of urea in bovine serum, urine and tap water samples.     

The combinatorial factor method for investigation of order-disorder in two-dimensional binary alloy

The aim of this study was to investigate order-disorder in the two-dimensional AB alloy to find out whether the number of components, N _A and N _B, was equal or not. To this end, using the nearest neighbor interactions, first, we applied a two-dimensional lattice which consisted of infinite rows, R and columns, L, so that, RL = N _A + N _B. For such a model, using the combinatorial factor method, we derived an exact equation for the partition function. Because, the derived partition function was very complicated, the thermodynamic properties of the lattice could not be calculated; however, but these properties could be estimated for the models with a limited number of rows. Our results show that, for models with finite number of rows, for each mole fraction of A in the specific temperature, a phase transition, like Onsager transition, takes place.     

Über Sauerstoffperowskite mit fünf- und vierwertigem Iridium Verbindungen vom Typ Ba2B3+Ir5+O6 und Ba3B3+Ir4,5+2O9

Perovskites with pentavalent iridium of type Ba₂B³⁺Ir⁵⁺O₆ are for B³⁺ = La, Nd, Sm, Gd, Dy, Y cubic and with B³⁺ = In hexagonal (6 L structure of BaTiO₃ type; sequence (hcc)₂). According to the intensity calculations of powder patterns for Ba₃SmIr₂O₉ and Ba₃YIr₂O₉ the new series Ba₃B³⁺Ir₂O₉ (B³⁺ = Sm, Eu, Gd, Dy, Ho, Yb, Sc, Y, In; mean oxidation state of iridium + 4.5) crystallize in a hexagonal 6 L structure of BaTiO₃ type (space group $\text{P6}{}_3\text{mmc}$; sequence (hcc)₂). The intensity-related R′ value is 8.6% for B³⁺ = Sm and 10.0% for Y. In the octahedral net the double groups of face-connected octahedra are occupied by the iridium atoms, which are dislocated from their ideal positions such that the IrIr distance has increased (2.72₀ Å (Sm) or 2.63₂ Å (Y)). The ir spectra are reported and discussed in connection with the corresponding factor group analysis.     

Helix-mediated over 1 nm-range chirality recognition by ligand-to-ligand interactions of dinuclear helicates

Long-range chirality recognition between the two chiral guest ligands can be tuned based on the helix distances (d_Ln–Ln = 11.5 and 14.0 Å) of bis-diketonate bridged dinuclear lanthanide complexes (2Th and 3Th, respectively) used as mediators. Both 2Th and 3Th form one-dimensional (1D) helical structures upon terminal binding of two chiral guest co-ligands (L^R or L^S). Long-range chiral self-recognition is achieved in self-assembly of 2Th with L^R and L^S to preferentially form homochiral assemblies, 2Th-L^R·L^R and 2Th-L^S·L^S, whereas there is no direct molecular interaction between the two guest ligands at the terminal edges. X-ray crystal structure analysis and density functional theory studies reveal that long-range chiral recognition is achieved by terminal ligand-to-ligand interactions between the bis-diketonate ligands and chiral guest co-ligands. Conversely, in self-assembly of 3Th with a longer helix length, statistical binding of L^R and L^S occurs, forming heterochiral (3Th-L^R·L^S) and homochiral (3Th-L^R·L^R and 3Th-L^S·L^S) assemblies in an almost 1 : 1 ratio. When phenyl side arms of the chiral guest co-ligands are replaced by isopropyl groups (L′^R and L′^S), chiral self-recognition is also achieved in the self-assembly process of 3Th with the longer helix length to generate homochiral (3Th-L′^R·L′^R and 3Th-L′^S·L′^S) assemblies as the favored products. Thus, subtle modification of the chiral guests is capable of achieving over 1.4 nm-range chirality recognition.

Long-range chirality recognition between the two chiral guest ligands can be tuned based on the helix distances (d_Ln–Ln = 11.5 and 14.0 Å) of bis-diketonate bridged dinuclear lanthanide complexes (2Th and 3Th, respectively).     

Xanthate anions in salts of biscyclopentadienylzirconium(IV) chelates

A series of [Cp ₂ZrL]⁺[ROCS₂]^? complexes whereL is the conjugate base of acetylacetone, benzoylacetone or 8-hydroxyquinoline andR=Me,Et ori-Pr have been synthesised in aqueous medium by the reaction of [Cp ₂ZrL]⁺Cl^? withROCS ₂ ^? K⁺. Various physico-chemical studies carried out for these complexes indicate that all the complexes are 1:1 electrolytes in which the ligandL is bidentate, consequently there is a tetrahedral coordination about the zirconium atom.     

Novel solid solutions of Ca3–1.5xYbx□0.5xB2SiO8: Synthesis,crystal structure,luminescence and thermal properties

New cation-deficient solid solutions of Ca_3–1.5xYb_x□_0.5xB₂SiO₈ (x = 0–0.4) based on Ca₃B₂SiO₈ borosilicate were synthesized. It was found that solid solutions in the range 0 ≤ x < 0.125 are structurally similar to the low-temperature monoclinic β-Ca₃B₂SiO₈, whereas those of the range 0.187 < x < 0.4 are similar to the high-temperature orthorhombic α-Ca₃B₂SiO₈. The crystal structures of solid solutions with x = 0.2 and 0.3 were determined from single crystal X-ray diffraction data and refined in the orthorhombic space group Pnma to R_obs = 0.051 and 0.057, respectively. Thermal expansion of the samples with x = 0.1, 0.3 was investigated using powder high-temperature X-ray diffraction in the temperature range of 20–800 °C. Photoluminescence spectra of Ca_3–1.5xYb_x□_0.5xB₂SiO₈ consist of the intra-configurational ²F_5/2–²F_7/2 transitions inside of Yb³⁺ ions with a maximum at 975 nm.     

New ternary rare-earth metal boride carbides R15B4C14 (R=Y, Gd-Lu) containing BC2 units: Crystal and electronic structures, magnetic properties

The ternary rare-earth boride carbides R₁₅B₄C₁₄ (R=Y, Gd-Lu) were prepared from the elements by arc-melting followed by annealing in silica tubes at 1270 K for 1 month. The crystal structures of Tb₁₅B₄C₁₄ and Er₁₅B₄C₁₄ were determined from single crystal X-ray diffraction data. They crystallize in a new structure type in space group P4/mnc (Tb₁₅B₄C₁₄: a=8.1251(5) Å, c=15.861(1) Å, Z=2, R₁=0.041 (wR₂=0.088) for 1023 reflections with I_o>2σ(I_o); Er₁₅B₄C₁₄: a=7.932(1) Å, c=15.685(2) Å, Z=2, R₁=0.037 (wR₂=0.094) for 1022 reflections with I_o>2σ(I_o)). The crystal structure contains discrete carbon atoms and bent CBC units in octahedra and distorted bicapped square antiprisms, respectively. In both structures the same type of disorder exists. One R atom position needs to be refined as split atom position with a ratio 9:1 indicative of a 10% substitution of the neighboring C⁴⁻ by C₂⁴⁻. The actual composition has then to be described as R₁₅B₄C_14.2. The isoelectronic substitution does not change the electron partition of R₁₅B₄C₁₄ which can be written as (R³⁺)₁₅(C⁴⁻)₆(CBC⁵⁻)₄•e⁻. The electronic structure was studied with the extended Hückel method. The investigated compounds Tb₁₅B₄C₁₄, Dy₁₅B₄C₁₄ and Er₁₅B₄C₁₄ are hard ferromagnets with Curie temperatures T_C=145, 120 and 50 K, respectively. The coercive field B_C=3.15 T for Dy₁₅B₄C₁₄ is quite remarkable.     

Regioselectivity in nickel(0) catalyzed cycloadditions of carbon dioxide with diynes

The regioselectivity of Ni(0)-catalyzed cycloadditions of CO₂ (1 atm) with various asymmetrical diynes to afford pyrones was explored. The use of 1,3-bis-(2,6-diisopropylphenyl)-imidazol-2-ylidene (IPr) provided high regioselectivity when one terminal substituent on the diyne was a methyl group and the other was medium or large in size (R_L=i-Pr, t-Bu, or TMS). In contrast, the use of a relatively small N-heterocyclic carbene, 1,3-dimesitylimidazol-2-ylidene (IMes), afforded high selectivity only when R_L was large (TMS). X-ray crystal analysis of the major isomer indicated that the relatively large R_L group was in the 3-position of the pyrone.     

Computing boiling temperatures and vapor pressures in homologous series of perfluorinated oligomers

Correlation relationships are proposed for computing boiling temperatures of T _b oligomers with the general formula R₁(CF₂) _n R₂ at normal pressure, where R₁ and R₂ are arbitrary end groups and the increment of the CF₂ fragment is 20.4 K. The dependences of coefficients A and B in the Clausius-Clapeyron equation (ln P = A ? B/T) on the length of the oligomer chain are determined by computing critical temperatures and pressures using an additive scheme.     

Line-width temperature dependence of selected R-branch transitions in the ν3 fundamental of 14N216O between 135 and 295 K

The temperature dependence of N₂ foreign gas broadening coefficients for eight R-branch transitions in the ν₃ fundamental of ¹⁴N₂¹⁶O have been measured at 135, 176, 210 and 295 K by tunable diode laser spectroscopy. In approximate agreement with the theoretical value of 0.75 for n in the relation γ⁰_L(T)/γ⁰_L(T₀) = (T₀/T)ⁿ for quadrupole—quadrupole collisional interactions, n ranged from 0.66 to 0.71. We observed a distinct dependence between J and the exponent n in the range between R(15) and R(43).