A droplet microfluidics strategy to rapidly synthesize, process, and screen up to hundreds of thousands of compositionally distinct synthetic hydrogels is presented. By programming the flow rates of multiple microfluidic inlet channels supplying individual hydrogel building blocks, microgel compositions and properties are systematically modulated. The use of fluorescent labels as proxies for the physical and chemical properties of the microgel permits the rapid screening and discovery of specific formulations through fluorescence microscopy or flow cytometry. This concept should accelerate the discovery of new hydrogel formulations for various novel applications.
In this paper, a novel synthesis of polyethylene glycol (PEG)‐modified polypyrrole (PPy) nanomaterials is demonstrated by combining reversible addition‐fragmentation chain transfer polymerization and oxidative polymerization. Dye molecules with a heat‐labile linker are used as a model drug and covalently anchored onto the PEGlated PPy nanomaterials via “click chemistry.” The strong absorption of such PPy nanomaterials in the near‐infrared region endows the system excellent photothermal effect, which can be used not only as efficient photothermal agents for photothermal therapy but also good controllers of a drug‐release system by retro D–A reaction.
A novel and robust route for the synthesis of a new amphiphilic brush copolymer, poly(glycidyl methacrylate)‐graft‐polyethylene glycol (PGMA‐g‐PEG), with high grafting densities of 97%–98% through a “grafting onto” method via carbon dioxide chemistry is reported. PGMA‐g‐PEG can self‐assemble and form stable spherical core–shell micelles in aqueous solution. Besides, the obtained PGMA‐g‐PEG polymer contains hydroxyurethane structures as the junction sites between the PGMA backbone and PEG side chain, which can be used for further modification.
It still remains a big challenge to fabricate binary colloidal crystals (binary CCs) from hard colloidal spheres, although a lot of efforts have been made. Here, for the first time, binary CCs are assembled from soft hydrogel spheres, PNIPAM microgels, instead of hard spheres. Different from hard spheres, microgel binary CCs can be facilely fabricated by simply heating binary microgel dispersions to 37 °C and then allowing them to cool back to room temperature. The formation of highly ordered structure is indicated by the appearance of an iridescent color and a sharp Bragg diffraction peak. Compared with hard sphere binary CCs, the assembly of PNIPAM microgel binary CCs is much simpler, faster and with a higher “atom” economy. The easy formation of PNIPAM microgel binary CC is attributed to the thermosensitivity and soft nature of the PNIPAM microgel spheres. In addition, PNIPAM microgel binary CCs can respond to temperature change, and their stop band can be tuned by changing the concentration of the dispersion.
Serial novel chiral polydiacetylenes (PDAs) are efficiently prepared at room temperature by the controllable electrophoretic deposition of diacetylenes with tunable structure as designed from easily available starting materials. The colorimetrically reversible properties of PDAs in the range between 25 and 85 °C are influenced by the different amino acid moiety in the PDAs as anticipated. The PDA containing aromatic ring is much better for the colorimetrically reversible properties, while irreversible thermochromism is displayed for the PDA with the structure of the longer methylene units in the main chain of amino acid moiety.
Diarylbutadiyne derivatives are ideal monomers for providing the π‐electron‐conjugated system of polydiacetylenes (PDAs). The geometrical parameters for diacetylene topochemical polymerization are known. However, control of the molecules under these parameters is yet to be addressed. This work shows that by simply tailoring diarylbutadiyne with amide side‐chain substituents, the arrangement of the substituents and the resulting hydrogen bond framework allows formation of π‐electron‐conjugated PDA.
To enhance the limited degradability of poly(ethylene glycol) (PEG), a straightforward method of synthesizing poly[(ethylene glycol)‐co‐(glycolic acid)] (P(EG‐co‐GA)) via a ruthenium‐catalyzed, post‐polymerization oxyfunctionalization of various PEGs is developed. Using this method, a set of copolymers with GA compositions of up to 8 mol% are prepared with minimal reduction in molecular weight (<10%) when compared to their commercially available starting materials. The P(EG‐co‐GA) copolymers are shown to undergo hydrolysis under mild conditions.
Artificial special wetting surfaces have drawn much interest due to their important applications in many fields. Nevertheless, tremendous challenges still remain for the fabrication of wetting surfaces with durable and self‐healing properties. Here, recent progress of durable, self‐healing wetting surfaces is highlighted by discussing the fabrications of several typical wetting surfaces including superhydrophobic surfaces, superamphiphobic surfaces, underwater superoleophobic surfaces, and high hydrophilic antifouling surfaces based on expertise and related research experience. To conclude, some perspectives on the future research and development of these special wetting surfaces are presented.
Hierarchical semicrystalline block copolymer nanoparticles are produced in a segmented gas‐liquid microfluidic reactor with top‐down control of multiscale structural features, including nanoparticle morphologies, sizes, and internal crystallinities. Control of multiscale structure on disparate length scales by a single control variable (flow rate) enables tailoring of drug delivery nanoparticle function including release rates.
The different mechanisms contributing to adhesion between two polymer surfaces are summarized and described in individual examples, which represent either seminal works in the field of adhesion science or novel approaches to achieve polymer–polymer adhesion. A further objective of this article is the development of new methodologies to achieve strong adhesion between low surface energy polymers.
Cross‐linked azobenzene liquid‐crystalline polymer films with a poly(oxyethylene) backbone are synthesized by photoinitiated cationic copolymerization. Azobenzene moieties in the film surface toward the light source are simultaneously photoaligned during photopolymerization with unpolarized 436 nm light and thus form a splayed alignment in the whole film. The prepared films show reversible photoinduced bending behavior with opposite bending directions when different surfaces of one film face to ultraviolet light irradiation.
Recently, polymer drug conjugates (PDCs) have attracted considerable attention in the treatment of cancer. In this work, a simple strategy has been developed to make PDCs of an antitumor alkylating agent, chlorambucil, using a biocompatible disulphide linker. Chlorambucil‐based chain transfer agent was used to prepare various homopolymers and block copolymers in a controlled fashion via reversible addition–fragmentation chain transfer polymerization. Chlorambucil conjugated block copolymer, poly(polyethylene glycol monomethyl ether methacrylate)‐b‐poly(methyl methacrylate), formed nanoaggregates in aqueous solutions, which are characterized by dynamic light scattering and field emission‐scanning electron microscopy. Finally, the simplicity of the design is exemplified by performing a release study of chlorambucil under reducing condition by using D,L‐dithiothreitol.
Similar to the traditional self‐assembly strategy, polymerization induced self‐assembly and reorganization (PISR) can produce a myriad of polymeric morphologies through morphology transitions. Besides the chain length ratio (R) of the hydrophobic to the hydrophilic blocks, the chain mobility in the intermediate nano‐objects, which is a requisite for morphology transition, is a determining factor in the formation of the final morphology. Although various morphologies have been fabricated, hexagonally packed hollow hoops (HHHs) with highly ordered internal structure have not, to the best of our knowledge, been prepared by PISR. In this article, the fabrication of HHHs through morphology transition from large compound vesicles to HHHs is reported. HHHs with highly regular internal structure may have significance in theoretical research and practical applications of nanomaterials.
Botryoid‐shaped reactive terpolymer nanoparticles, whose aldehyde‐functional living domains are miniaturized into small‐sized discrete “grapes” and attached onto the outwardly‐branched scaffolds of fluorinated segments, are reported. These nanostructures can be fabricated by spontaneous structural reorganization of core–shell terpolymer micelles simply by manipulating drying conditions. The miniaturized discrete living domains are stabilized by outwardly‐branched scaffolds and exhibit excellent accessibility to solution media, thus can effectively respond to solution media, which is desired in sensor‐related applications.
This communication describes photoresponsive gels, prepared using ring‐opening metathesis polymerization (ROMP), that dissolve upon irradiation with ultraviolet light. Exposure of mixtures of norbornene‐type ROMP monomers and new photoreactive cross‐linkers comprising two norbornene units bound through a chain containing o‐nitrobenzyl esters (NBEs) to well‐known ruthenium carbene catalysts gave cross‐linked polymer networks that swelled in organic solvents or water depending on the structure of the monomer. These gels became homogeneous upon irradiation with UV light, consistent with breaking of the cross‐links through photolysis of the NBE groups. The irradiation time required for homogenization of the gels depended on the cross‐link density and the structure of the photoresponsive cross‐linker.
Synthesis of a cyclodextrin (CD) polyrotaxane is achieved for the first time by simultaneous free radical polymerization of isoprene, threading by CD, and stoppering by copolymerization of styrene. This reaction is performed in an eco‐friendly manner in an aqueous medium similar to classical emulsion polymerization. Threaded CD rings of the polyrotaxane are cross‐linked by hexamethylene diisocyanate, leading to highly elastic slide‐ring gels.
Photodegradable physically cross‐linked polymer networks are prepared from self‐assembly of photolabile triblock copolymers. Linear triblock copolymers composed of poly (o‐nitrobenzyl methacrylate) and poly(ethylene glycol) (PEG) segments of variable molecular weights were synthesized using atom transfer radical polymerization. Triblock polymers with low‐molecular‐weight PEG segments form solid films upon hydration with robust mechanical properties including a Young's modulus of 76 ± 12 MPa and a toughness of 108 ± 31 kJ m−3. Triblock polymers with high‐molecular‐weight PEG segments form physically cross‐linked hydrogels at room temperature with a dynamic storage modulus of 13 ± 0.6 kPa and long‐term stability in hydrated environments. Both networks undergo photodegradation upon irradiation with long wave UV light.
This paper demonstrates the development of pH and thermo‐responsive fluorescent nanoparticles, which are composed of graphene oxide (GO) with BODIPY conjugated PEG, to trigger the detection of cancer cells through imaging based on intracellular accommodation. Responsiveness to pH is studied using atomic force microscopy and apparent thickness differences are seen with changes in pH. Confocal images of the nanoparticles (NPs) exhibit remarkably bright fluorescence at lysosomal pH, while no fluorescence is observed under a physiological environment, making the NPs a novel fluorescent probe. The NPs are able to accumulate the hydrophobic anticancer drug DOX due to the hydrophobic surface of GO and show excellent drug release behavior. Therefore, the NPs developed are novel candidates for a fluorescent probe to identify cancer cells and a drug carrier for cancer therapy.
Natural macromolecules, i.e., sequence‐controlled polymers, build the basis for life. In synthetic macromolecular chemistry, reliable tools for the formation of sequence‐controlled macromolecules are rare. A robust and efficient chain‐growth approach based on the simultaneous living anionic polymerization of sulfonamide‐activated aziridines for sequence control of up to five competing monomers resulting in gradient copolymers is presented. The simultaneous azaanionic copolymerization is monitored by real‐time 1H NMR spectroscopy for each monomer at any time during the reaction. The monomer sequence can be adjusted by the monomer reactivity, depending on the electron‐withdrawing effect by the sulfonamide (nosyl‐, brosyl‐, tosyl‐, mesyl‐, busyl) groups. This method offers unique opportunities for sequence control by competing copolymerization: a step forward to well‐engineered synthetic polymers with defined microstructures.
Polyacrylamides containing pendant aminobisphosphonate groups are synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization and a multicomponent postpolymerization functionalization reaction. A Moedritzer–Irani reaction installs the phosphonic acid groups on well‐defined, RAFT‐generated polymers bearing a pendant amine. An alternate route to the same materials is developed utilizing a three‐component Kabachnik–Fields reaction and subsequent dealkylation. Kinetics of the RAFT polymerization of the polymer precursor are studied. Successful functionalization is demonstrated by NMR and FTIR spectroscopy and elemental analysis of the final polymers.
