Effect of Viscosity on the Formation of Porous Polydimethylsiloxane for Wearable Device Applications

Medical devices, which enhance the quality of life, have experienced a gradual increase in demand. Various research groups have attempted to incorporate soft materials such as skin into wearable devices. We developed a stretchable substrate with high elasticity by forming a porous structure on polydimethylsiloxane (PDMS). To optimize the porous structure, we propose a manufacturing process that utilizes a high-pressure steam with different viscosities (400, 800, 2100, and 3000 cP) of an uncured PDMS solution. The proposed method simplifies the manufacturing of porous structures and is cost-effective compared to other technologies. Porous structures of various viscosities were formed, and their electrical and mechanical properties evaluated. Porous PDMS (3000 cP) was formed in a sponge-like three-dimensional porous structure, compared to PDMS formed by other viscosities. The elongation of porous PDMS (3000 cP) was increased by up to 30%, and the relative resistance changed to less than 1000 times with the maximum strain test. The relative resistance increased the initial resistance (R₀) by approximately 10 times during the 1500-times repeated cycling tests with 30% strain. As a result, patch-type wearable devices based on soft materials can provide an innovative platform that can connect with the human skin for robotics applications and for continuous health monitoring.     

A Facile Method for the Preparation of Monodisperse Beads with Uniform Pore Sizes for Cell Culture

This paper describes a facile method for the preparation of porous gelatin beads with uniform pore sizes using a simple fluidic device and their application as supporting materials for cell culture. An aqueous gelatin droplet containing many uniform toluene droplets, produced in the fluidic device, is dropped into liquid nitrogen for instant freezing and the small toluene droplets evolve into pores in the gelatin beads after removal of toluene and then freeze‐drying. The porous gelatin beads exhibit a uniform pore size and monodisperse diameter as well as large open pores at the surface. Fluorescence microscopy images of fibroblast‐loaded gelatin beads confirm the attachment and proliferation of the cells throughout the porous gelatin beads.     

Coating Strategies Using Layer‐by‐layer Deposition for Cell Encapsulation

The layer‐by‐layer (LbL) deposition technique is widely used to develop multilayered films based on the directed assembly of complementary materials. In the last decade, thin multilayers prepared by LbL deposition have been applied in biological fields, namely, for cellular encapsulation, due to their versatile processing and tunable properties. Their use was suggested as an alternative approach to overcome the drawbacks of bulk hydrogels, for endocrine cells transplantation or tissue engineering approaches, as effective cytoprotective agents, or as a way to control cell division. Nanostructured multilayered materials are currently used in the nanomodification of the surfaces of single cells and cell aggregates, and are also suitable as coatings for cell‐laden hydrogels or other biomaterials, which may later be transformed to highly permeable hollow capsules. In this Focus Review, we discuss the applications of LbL cell encapsulation in distinct fields, including cell therapy, regenerative medicine, and biotechnological applications. Insights regarding practical aspects required to employ LbL for cell encapsulation are also provided.     

Hollow,pH-Sensitive Microgels as Nanocontainers for the Encapsulation of Proteins

Depending on their architectural and chemical design, microgels can selectively take up and release small molecules by changing the environmental properties, or capture and protect their cargo from the surrounding conditions. These outstanding properties make them promising candidates for use in biomedical applications as delivery or carrier systems. In this study, hollow anionic p(N-isopropylacrylamid-e-co-itaconic acid) microgels are synthesized and analyzed regarding their size, charge, and charge distribution. Furthermore, interactions between these microgels and the model protein cytochrome c are investigated as a function of pH. In this system, pH serves as a switch for the electrostatic interactions to alternate between no interaction, attraction, and repulsion. UV–vis spectroscopy is used to quantitatively study the encapsulation of cytochrome c and possible leakage. Additionally, fluorescence-lifetime images unravel the spatial distribution of the protein within the hollow microgels as a function of pH. These analyses show that cytochrome c mainly remains entrapped in the microgel, with pH controlling the localization of the protein – either in the microgel's cavity or in its network. This significantly differentiates these hollow microgels from microgels with similar chemical composition but without a solvent filled cavity.     

Noncovalent Hydrogel Beads as Microcarriers for Cell Culture

Hydrogel beads as microcarriers could have many applications in biotechnology. However, bead formation by noncovalent cross‐linking to achieve high cell compatibility by avoiding chemical reactions remains challenging because of rapid gelation rates and/or low stability. Here we report the preparation of homogeneous, tunable, and robust hydrogel beads from peptide–polyethylene glycol conjugates and oligosaccharides under mild, cell‐compatible conditions using a noncovalent crosslinking mechanism. Large proteins can be released from beads easily. Further noncovalent modification allows for bead labeling and functionalization with various compounds. High survival rates of embedded cells were achieved under standard cell culture conditions and after freezing the beads, demonstrating its suitability for encapsulating and conserving cells. Hydrogel beads as functional system have been realized by generating protein‐producing microcarriers with embedded eGFP‐secreting insect cells.     

Gelation Kinetics and Mechanical Properties of Thiol-Tetrazole Methylsulfone Hydrogels Designed for Cell Encapsulation

Hydrogel precursors that crosslink within minutes are essential for the development of cell encapsulation matrices and their implementation in automated systems. Such timescales allow sufficient mixing of cells and hydrogel precursors under low shear forces and the achievement of homogeneous networks and cell distributions in the 3D cell culture. The previous work showed that the thiol-tetrazole methylsulfone (TzMS) reaction crosslinks star-poly(ethylene glycol) (PEG) hydrogels within minutes at around physiological pH and can be accelerated or slowed down with small pH changes. The resulting hydrogels are cytocompatible and stable in cell culture conditions. Here, the gelation kinetics and mechanical properties of PEG-based hydrogels formed by thiol-TzMS crosslinking as a function of buffer, crosslinker structure and degree of TzMS functionality are reported. Crosslinkers of different architecture, length and chemical nature (PEG versus peptide) are tested, and degree of TzMS functionality is modified by inclusion of RGD cell-adhesive ligand, all at concentration ranges typically used in cell culture. These studies corroborate that thiol/PEG-4TzMS hydrogels show gelation times and stiffnesses that are suitable for 3D cell encapsulation and tunable through changes in hydrogel composition. The results of this study guide formulation of encapsulating hydrogels for manual and automated 3D cell culture.     

Redox‐Triggered Self‐Rolling Robust Hydrogel Tubes for Cell Encapsulation

In this study, mechanically strong hydrogels are synthesized by photopolymerization of 2‐vinyl‐4,6‐diamino‐1,3,5‐triazine, poly(ethylene glycol) methacrylate, and disulfide‐containing cross‐linker, N′N‐bis(acryloyl)cystamine. The bilayer hydrogel with distinct cross‐linking density is shown to self‐roll into a 3D tube, which could still be well reinforced by hydrogen bondings, upon exposing reductants such as 1,4‐dithio‐DL‐threitol (DTT) or L‐glutathione (GSH), because the redox‐induced cleavage of disulfide bonds results in the imbalanced internal shrinking stress between two layers. At an intracellular level of GSH, model L929 cells‐seeded bilayer gel sheet could curl up into a 3D tubular scaffold where the cells maintained good viability.

     

Cross-Linked Polyphosphazene Hollow Nanosphere-Derived N/P-Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction

Heteroatom-doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template-free approach to construct cross-linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P-doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m² g⁻¹). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co-N₂P₂) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom-containing polymer nanospheres and their derived single metal atom doped carbon catalysts.     

新型球形纳米空心SiO2的模板合成方法研究

以纳米碳酸钙颗粒为新颖的无机模板剂, 硅酸钠为无机硅源, 通过溶胶-凝胶法形成CaCO₃/SiO₂的核壳结构; 随后通过高温煅烧、酸溶和干燥处理, 合成出了具有高比表面积的球形纳米空心二氧化硅粒子. 然后, 分别采用TEM, SEM, EDS, XRD, FTIR和TG等测试手段对样品进行了分析和表征, 并考察了不同合成条件, 如反应温度、反应pH值、煅烧温度和包覆反应时SiO₂/CaCO₃的配比对纳米空心二氧化硅粒子的比表面积变化. 实验结果表明: 较高的反应温度如60～80 ℃, pH值9左右、SiO₂包覆量为碳酸钙质量的10%, 以及煅烧温度为700 ℃, 有利于形成空心形貌较好、比表面较大的球形纳米空心二氧化硅.     

Cross‐Linked Polyphosphazene Hollow Nanosphere‐Derived N/P‐Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction

Heteroatom‐doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template‐free approach to construct cross‐linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P‐doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m² g^?1). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co‐N₂P₂) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom‐containing polymer nanospheres and their derived single metal atom doped carbon catalysts.     

Designing Hollow Carbon Sphere with Hierarchal Porous for Na-S Systems with Ultra-Long Cycling Stabilities

Captured by the low-cost and high theoretical specific capacity, Na-S systems have garnered much attention. However, their intermediate products (dissolved polysulfide) are always out of control. Considering the excellent space confinements and conductivity, they have been regarded as promising candidates. Herein, the hollow spheres with suitable thickness shell (~20 nm) are designed as hosting materials, accompanied by in-depth complexing. Benefitting from the abundant micro-pores (mainly about conical-type and slits-type pores < 1.0 nm), the active S4 molecules are successfully filled in the pores through vacuum tube sealing technology, effectively avoiding the process from solid S₈ to liquid Na₂S₆. As cathode for Na-S systems, their capacity could remain at 920 mAh g⁻¹ at 0.1 C after 100 cycles. Even at 10.0 C, the capacity still remained at about 310 mAh g⁻¹ after 7000 cycles. Supported by the detailed kinetic behaviors, the improvement of ions diffusion behaviors is noted, bringing about the effective thorough redox reactions. Moreover, the enhanced surface-controlling behaviors further induces the evolution of rate properties. Therefore, their stable phase changing is further confirmed through in situ resistances. Thus, the work is anticipated to offer significant design for hosting carbon materials and complexing manners.     

新型球形纳米空心SiO2的模板合成方法研究

以纳米碳酸钙颗粒为新颖的无机模板剂,硅酸钠为无机硅源,通过溶胶-凝胶法形成CaCO3／SiO2的核壳结构;随后通过高温煅烧、酸溶和干燥处理,合成出了具有高比表面积的球形纳米空心二氧化硅粒子．然后,分别采用TEM,SEM,EDS,XRD,FTIR和TG等测试手段对样品进行了分析和表征,并考察了不同合成条件,如反应温度、反应pH值、煅烧温度和包覆反应时SiO2／CaCO3的配比对纳米空心二氧化硅粒子的比表面积变化．实验结果表明：较高的反应温度如60～80℃,pn值9左右、SiO2包覆量为碳酸钙质量的10％,以及煅烧温度为700℃,有利于形成空心形貌较好、比表面较大的球形纳米空心二氧化硅。     

Constructing Atomic Fe and N Co-doped Hollow Carbon Nanospheres with a Polymer Encapsulation Strategy for High-Performance Lithium-Sulfur Batteries with Accelerated Polysulfide Conversion

As competitive next-generation rechargeable batteries, lithium-sulfur batteries (LSBs) suffer from the shuttle effect and the sluggish kinetics of intermediate polysulfides during charge and discharge processes, adversely affecting their electrochemical performances and actual applications. Herein, we demonstrate a polymer encapsulation strategy to synthesize atomic Fe and N co-doped hollow carbon nanospheres (Fe−NHC) with Fe−N_x sites for modifying commercial PP separator of LSBs to suppress the shuttle effect and promote the kinetics of intermediate polysulfides. Benefiting from the excellent structural design, the doped-N with positive charges could effectively adsorb negatively charged soluble polysulfides, help attract the soluble polysulfides to the Fe atoms and boost the catalytic transformation of the soluble polysulfides. Additionally, such a thin carbon shell could provide a short mass diffusion pathway and hence promote the adsorption and the catalytic conversion. Therefore, the battery with the Fe−NHC/PP separator delivers outstanding cycling and rate performances. At the large current density of 1 C, the specific capacity is 1079 mA h g⁻¹ and maintains a low loss of 0.076 % per cycle within 500 cycles. Even at a harsh current density of 4 C, a high capacity of 824 mA h g⁻¹ is still achieved, indicating the advantage of the Fe−NHC/PP separator in LSBs.     

N‐Doped Hollow Porous Carbon Spheres/Bismuth Hybrid Film Modified Electrodes for Sensitive Voltammetric Determination of Trace Cadmium

In this work, N‐doped hollow porous carbon spheres (N‐HPCSs) were synthesized by silicon dioxide template‐assisted polybenzoxazine (PB) coating strategy. The prepared N‐HPCSs have a smooth hollow ball structure surrounded by a well‐defined porous shell. Combining with in‐situ plating of Bi film, the N‐HPCSs were further fabricated a sensitive electrochemical platform for determination trace levels of Cd(II) by differential pulse anodic stripping voltammetry (DPASV). Under the optimized conditions, the Bi‐N‐HPCSs based sensor displays a linear response to Cd(II) over the range of 0.5 μg L⁻¹ to 150 μg L⁻¹. Meanwhile, the limit of detection (LOD, S/N=3) is estimated to be around 0.16 μg L⁻¹ for Cd(II), which is 31 times lower than the safety values set by United States Environmental Protection Agency (EPA) for the drinking water. Moreover, the proposed method was successfully applied to detection of Cd(II) in tap water and lake water, and the analytical results of the presented method are agreed well with inductively coupled plasma‐mass spectrometry (ICP‐MS) data. Due to the excellent analytical performance, the fabricated electrode is promised for future development in monitoring of cadmium pollution in the environment.     

Synthesis of Sulfonated Porous Organic Polymers with a Hydrophobic Core for Efficient Acidic Catalysis in Organic Transformations

Synthesis of sulfonated porous polymers with improved hydrophobicity and stability is of extreme importance in both academic research and industrial applications. However, there is often a trade-off between acidity and surface hydrophobicity of sulfonated polymers. In this study, we report a strategy for the synthesis of sulfonated porous organic polymers (S-PT) with improved hydrophobicity via free radical polymerization method by using a rigid and large multidentate monomer, 1,3,5-tri(4-vinylphenyl)-benzene, having a hydrophobic core. The results of vapor adsorption measurement show that S-PT has more hydrophobic properties than sulfonated poly(divinylbenzene) (S-PD), attributed to the hydrophobic core of its multidentate monomer. Furthermore, the optimization of sulfonation time established a balance between surface acidity and hydrophobicity. Under optimized conditions, S-PT afforded up to 113 mmol g⁻¹ h⁻¹ TOF in the esterification of oleic acid with methanol, more active than commercial Amberlyst-15 with TOF of 15 mmol g⁻¹ h⁻¹ and Nafion NR50 with TOF of 7 mmol g⁻¹ h⁻¹. We believe that the findings of this study will provide useful insights to advance the design and synthesis of solid acid catalysts for organic transformations.     

When Mesoporous Silica Meets the Alkaline Polyelectrolyte: A Controllable Synthesis of Functional and Hollow Nanostructures with a Porous Shell

An efficient and environment friendly surface‐protected etching method by using mesoporous silica as a template and alkaline polyelectrolyte as both the protecting and etching agent was developed to prepare a SiO₂ nanotube with a porous shell. The polyelectrolytes attached to the template not only create a localized alkaline environment, but also effectively protect the silica surface, whereas the mesopore channels accelerate the diffusion of etchant throughout the template, all of which facilitate the formation of hollow structures in a fully controllable way. By tuning the etching power and protecting ability of the polyelectrolyte, the rigidity and porosity of products can be precisely manipulated. It is inspiring that various alkaline polyelectrolytes including polypeptide and dextran derivative can be used for the etching process, so that the porous and hollow nanostructures are born with positively charged and biocompatible surface as well as abundant amino groups for further coupling, which make them potential capsules for drug delivery and probes for imaging and detection. The protective etching process can also be extended to the preparation of yolk‐shell super structures with functional cores, or porous nanoparticle assemblies with their individual characteristics maintained.     

Facile Synthesis of Double‐Shelled Polypyrrole Hollow Particles with a Structure Similar to That of a Thermal Bottle

Polystyrene (PS) hollow spheres containing a hole on the surface were used as templates to fabricate double‐shelled polypyrrole (PPy) hollow particles with a unique structure similar to that of a thermal bottle. Thanks to the hole on the surface, the monomer and initiator could easily and quickly diffuse into the interior of the PS hollow sphere to generate uniform PPy coatings on both the inner and outer surfaces of the hollow template. When the PS template was selectively removed with tetrahydrofuran, we obtained a double‐shelled hollow particle with a structure resembling that of a thermal bottle. We also demonstrated that the morphology and porosity of the resultant PPy coatings could be manipulated and fine‐tuned by adjusting at least three parameters: the concentration of monomer, the polymerization time, and the addition of poly(vinyl pyrrolidone).

     

Encapsulation of a Porous Organic Cage into the Pores of a Metal–Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient‐wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO₂ affinity were successfully encapsulated into the nanospace of Cr‐based MIL‐101 while retaining the crystal framework, morphology, and high stability of MIL‐101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL‐101, more affinity sites for CO₂ are created in the resulting CB6@MIL‐101 composites, leading to enhanced CO₂ uptake capacity and CO₂/N₂, CO₂/CH₄ separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.     

Precise Formation of a Hollow Carbon Nitride Structure with a Janus Surface To Promote Water Splitting by Photoredox Catalysis

The precise modification of redox species on the inner and outer surfaces of hollow nanostructures is relevant in catalysis, surface science, and nanotechnology, but has proven difficult to achieve. Herein, we develop a facile approach to specifically fabricate Pt and Co₃O₄ nanoparticles (NPs) onto the interior and exterior surface of hollow carbon nitride spheres (HCNS), respectively, to promote the surface redox functions of the polymer semiconductors. The photocatalytic water splitting activities of HCNS with spatially separated oxidation and reduction centers at their nanodomains were enhanced. The origin of the enhanced activity was attributed to the spatially separated reactive sites for the evolution of H₂ and O₂ and also to the unidirectional migration of the electron and hole on the Janus surfaces, thereby preventing the unwanted reverse reaction of water splitting and decreasing charge recombination.     

Computer-aided Modeling of Porous Electrodes with an Immobilized Enzyme: Substrates with a Partially Regular Structure

In porous electrodes with an immobilized enzyme the substrate must have a high specific surface area, which must be accessible to landing onto it a maximum number of enzyme molecules. These demands are not easy to meet. Conceivable are limiting versions as follows: a stochastic substrate, where substrate particles (SP) are distributed in the volume randomly, and a regular substrate, where SP are distributed strictly regularly. Both versions of the organization of SP have advantages and disadvantages; therefore, in the paper studied is a third, intermediate, version, specifically, substrates with a partially regular structure. Shown is that there exists an optimum of values of fractal dimensionality for a regular base of a substrate, where, by somewhat sacrificing the amount of active enzymes, one can attain a considerable ease of the process of landing enzymes on the surface of a porous substrate. Calculations also show that of practical interest may be a porous substrate with a purely regular structure.