Polymers with pendant phenoxyl radicals are synthesized and the electrochemical properties are investigated in detail. The monomers are polymerized using ring‐opening metathesis polymerization (ROMP) or free‐radical polymerization methods. The monomers and polymers, respectively, are oxidized to the radical either before or after the polymerization. These phenoxyl radicals containing polymers reveal a reversible redox behavior at a potential of −0.6 V (vs Ag/AgCl). Such materials can be used as anode‐active material in organic radical batteries (ORBs).
Photoresponsive azobenzene‐containing systems ranging from molecular to macroscopic material levels have greatly been increasing their significance in materials chemistry. This review focuses on the studies on light induced or triggered motions in azobenzene liquid crystalline (LC) polymer films at mesoscopic and microscopic levels. Due to the cooperative nature of liquid crystalline materials, highly efficient photoalignment and photo‐triggered migrating motions are realized in mostly repeated manners. Here, recent advances in surface‐grafted LC polymer brushes, LC block copolymer films, and LC polymer films that exhibit mass migrations are overviewed. Such newly emerged photoresponsive systems are expected to provide new possibilities and applications in polymer thin film technologies.
Stimuli responsive surfaces that show reversible fluorescence switching behavior in response to temperature changes were fabricated. Oligo(ethylene glycol) methacrylate thermoresponsive polymers with amine end‐groups were prepared by atom transfer radical polymerization (ATRP). The polymers were patterned on silicon surfaces by electron beam (e‐beam) lithography, followed by conjugation of self‐quenching fluorophores. Fluorophore conjugated hydrogel thin films were bright when the gels were swollen; upon temperature‐induced collapse of the gels, self‐quenching of the fluorophores led to significant attenuation of fluorescence. Importantly, the fluorescence was regained when the temperature was cooled. The fluorescence switching behavior of the hydrogels for up to ten cycles was investigated and the swelling‐collapse was verified by atomic force microscopy. Morphing surfaces that change shape several times upon increase in temperature were obtained by patterning multiple stimuli responsive polymers.
A new approach to stabilize carbon nanotubes (CNTs) in aqueous solution with a reduction‐responsive water‐soluble polymer is reported. The novel polymer synthesized by a controlled radical polymerization is functionalized with pendant pyrene groups capable of adhering to the surface of CNTs through π–π noncovalent interactions, and labeled with disulfide linkages to exhibit reduction‐responsive cleavage. Upon the cleavage of junction disulfide linkages in a reducing environment, water‐soluble polymers are shed, retaining clean CNT surfaces for electrochemical catalytic reactions.
A one‐pot procedure that straightforwardly combines reversible addition‐fragmentation chain transfer (RAFT) polymerization and end group transformation to remove the RAFT end groups is developed for the synthesis of well‐defined poly(meth)acrylates and polyacrylamides with inert end groups. This procedure only requires the addition of an amine at the end of the standard RAFT polymerization procedure, which avoids the separation and purification of the intermediate polymers and, hence, extremely reduces the working time and utilized amount of solvents. Upon addition of the amine, a thiol group is formed by aminolysis of the thiocarbonylthio group, which subsequently undergoes Michael addition with unreacted monomer leading to an inert thioether functionalized polymer.
A linear supramolecular polymer based on the self‐assembly of an easily available copillar[5]arene monomer is efficiently prepared, which is evidenced by the NMR spectroscopy, viscosity measurement, and DOSY experiment. The single‐crystal X‐ray analysis reveals that the polymerization of the AB‐type monomer is driven by the quadruple CH•••π interactions and one CH•••O interaction.
The first vapor‐phase deposition of poly(vinyl cinnamate) (PVCin) is reported. Initiated chemical vapor deposition (iCVD) is used to synthesize PVCin thin films with an average thickness of 100 nm. Free radical polymerization and cyclization reactions compete during the deposition process, with approximately 45% of the repeat units undergoing cyclization. Exposure to UV light (λ = 254 nm) induces dimerization (cross‐linking) of the PVCin, which is quantified using spectroscopic techniques. Approximately 90% of the free cinnamate moieties are dimerized at a UV dose of 300 mJ cm−2. PVCin is also incorporated into a copolymer with N‐isopropylacrylamide, which exhibits a characteristic change in hydrophilicity with temperature. The copolymer is selectively cross‐linked through a mask, and reversible swelling of patterns with 30 μm resolution is demonstrated by submerging the film in water.
Cyclic polymers with alternating monomer sequence are synthesized for the first time based on the ring‐closure strategy. Well‐defined telechelic alternating polymers are synthesized by reversible addition–fragmentation chain transfer polymerization by copolymerizing the electron acceptor monomer of N‐benzylmaleimide and donor monomer of styrene with a feed ratio of 1 between them. The corresponding cyclic alternating polymers are then produced by the UV‐induced Diels–Alder click reaction to ring‐close the linear alternating polymer precursors under highly diluted reaction solution.
Since the development of supramolecular chemical biology, self‐organised nano‐architectures have been widely explored in a variety of biomedical applications. Functionalized synthetic molecules with the ability of non‐covalent assembly in an aqueous environment are typically able to interact with biological systems and are therefore especially interesting for their use in theranostics. Nanostructures based on π‐conjugated oligomers are particularly promising as theranostic platforms as they bear outstanding photophysical properties as well as drug loading capabilities. This Feature Article provides an overview on the recent advances in the self‐assembly of intrinsically fluorescent nanoparticles from π‐conjugated small molecules such as fluorene or perylene based chromophores for biomedical applications.
Type II photoinitiated self‐condensing vinyl polymerization for the preparation of hyperbranched polymers is explored using 2‐hydroxyethyl methacrylate (HEMA) or 2‐(dimethylamino)ethyl methacrylate (DMAEMA), and methyl methacrylate as hydrogen donating inimers and comonomer, respectively, in the presence of benzophenone and camphorquinone under UV and visible light. Upon irradiation at the corresponding wavelength, the excited photoinitiator abstracts hydrogen from HEMA or DMAEMA leading to the formation of initiating radicals. Depending on the concentration of inimers, type of the photoinitiator, and irradiation time, hyperbranched polymers with different branching densities and cross‐linked polymers are formed.
Self‐assembly of C3 discotic molecules bearing dipeptide pendants into helical supramolecular polymers is investigated. The dipeptides are constituted from glycine and alanine with altered sequence, aiming at modulating the steric hindrance and examining the steric effects on the assembly. This steric hindrance effect is further illustrated with a dipeptide formed from glycine and valine, which carries a much larger isopropyl side unit. Their supramolecular polymerization is examined in various organic solvents and at different temperatures. The assembly morphology is directly visualized with atomic force microscopy. It is found that small changes in the dipeptide motifs in combination with solvent structure and the solution concentrations lead to different expression of the supramolecular assembly.
Self‐initiated photografting polymerization is used to couple the polymerizable initiator monomer 2‐(2‐chloropropanoyloxy)ethyl acrylate to a range of polymeric substrates. The technique requires only UV light to couple the initiator to surfaces. The initiator surface density can be varied by inclusion of a diluent monomer or via selection of initiator and irradiation parameters. The functionality of the initiator surface is demonstrated by subsequent surface‐initiated atom transfer radical polymerization. Surfaces are characterized by x‐ray photoelectron spectroscopy (XPS), ellipsometry, and atomic force microscopy (AFM), and UV‐induced changes to the initiator are assessed by 1H NMR and gel permeation chromatography (GPC). This is the first time this one‐reactant one‐step technique has been demonstrated for creating an initiator surface of variable density.
The first polymer bearing exTTF units intended for the use in electrical charge storage is presented. The polymer undergoes a redox reaction involving two electrons at −0.20 V vs Fc/Fc+ and is applied as active cathode material in a Li‐organic battery. The received coin cells feature a theoretical capacity of 132 mAh g−1, a cell potential of 3.5 V, and a lifetime exceeding more than 250 cycles.
A recent response on a publication from our team investigating solvent effects on propagation rate coefficients is commented. Among other issues, we point to the fact that the response interprets only a subset of the data provided in our original contribution.
In this article, the growth of polymer nanoparticles formed at the liquid–vapor interface via vapor phase polymerization is studied. The particles grow by polymer aggregation, which is driven by the surface tension interaction between the liquid and polymer. It is demonstrated that the mechanism of particle growth is determined by whether polymer particles remain at the liquid–vapor interface or submerge into the liquid. The position of the particles depends on the interaction between the polymer and the liquid. For example, the deposition of poly(n‐butyl acrylate) onto poly(dimethyl siloxane) and Krytox liquids leads to the formation of nanoparticles that remain at the liquid–vapor interface. The size of these particles increases as a function of deposition time. The deposition of poly(4‐vinylpyridine) onto poly(dimethyl siloxane) and Krytox leads to the formation of nanoparticles that submerge into the liquid. The size of these particles does not significantly change with deposition time. Our study offers a new rapid, one‐step synthetic approach for fabricating functional polymer nanoparticles for applications in catalysis, photonics, and drug delivery.
Cationic imidazolium‐functionalized polyethylene is accessible by insertion copolymerization of ethylene and allyl imidazolium tetrafluoroborate (AIm‐BF4) with phosphinesulfonato palladium(II) catalyst precursors. Imidazolium‐substituted repeat units are incorporated into the main chain and the initiating saturated chain end of the linear polymers, rather than the terminating unsaturated chain end. The counterion of the allyl imidazolium monomer is decisive, with the chloride analogue (AIm‐Cl) no polymerization is observed. Stoichiometric studies reveal the formation of an inactive chloride complex from the catalyst precursor. An effect of moderate densities (0.5 mol%) of ionic groups on the copolymers' physical properties is exemplified by an enhanced wetting by water.
Molecularly imprinted polymer (MIP) synthetic receptors have proposed and applied applications in chemical extraction, sensors, assays, catalysis, targeted drug delivery, and direct inhibition of harmful chemicals and pathogens. However, they rely heavily on effective design for success. An algorithm has been written which mimics radical polymerization atomistically, accounting for chemical and spatial discrimination, hybridization, and geometric optimization. Synthetic ephedrine receptors were synthesized in silico to demonstrate the accuracy of the algorithm in reproducing polymers structures at the atomic level. Comparative analysis in the design of a synthetic ephedrine receptor demonstrates that the new method can effectively identify affinity trends and binding site selectivities where commonly used alternative methods cannot. This new method is believed to generate the most realistic models of MIPs thus produced. This suggests that the algorithm could be a powerful new tool in the design and analysis of various polymers, including MIPs, with significant implications in areas of biotechnology, biomimetics, and the materials sciences more generally.
Solvent vapor annealing (SVA) is originally developed to attain equilibrium nanostructures from microphase‐separated block polymer thin films. Interestingly, by carefully choosing a solvent vapor that can selectively mobilize the amorphous chains of a semicrystalline polymer while preserving the integrity of its crystalline structure, this study demonstrates that the SVA method can also be utilized to introduce hierarchical structures onto semicrystalline polymer‐based materials. This study on electrospun poly(ε‐caprolactone) (PCL) fibers clearly shows that acetone, a poor solvent for PCL, can effectively delocalize the amorphous chains and redeposit them onto the pre‐existing crystal edges, giving rise to secondary nanostructures inscribed onto the PCL fibers. In the past decade, various fiber fabrication methods and numerous fiber products are reported. The easy one‐step approach reported here provides new insight into the design and fabrication of structurally hierarchical polymeric materials.
The synthesis and characterization of poly(3,4‐ethylenedioxythiophene) (PEDOT) using water‐assisted vapor phase polymerization (VPP) and oxidative chemical vapor deposition (oCVD) are reported. For the VPP PEDOT, the oxidant, FeCl3, is sublimated onto the substrate from a heated crucible in the reactor chamber and subsequently exposed to 3,4‐ethylenedioxythiophene (EDOT) monomer and water vapor in the same reactor. The oCVD PEDOT was produced by introducing the oxidant, EDOT monomer, and water vapor simultaneously to the reactor. The enhancement of doping and crystallinity is observed in the water‐assisted oCVD thin films. The high doping level observed at UV–vis–NIR spectra for the oCVD PEDOT, suggests that water acts as a solubilizing agent for oxidant and its byproducts. Although the VPP produced PEDOT thin films are fully amorphous, their conductivities are comparable with that of the oCVD produced ones.
l ‐Ascorbic acid, commonly known as vitamin C and one of the most important biological compounds, is converted to a α,ω‐diene monomer and subsequently polymerized for the first time by acyclic diene metathesis. Various experimental conditions such as polymerization medium, catalyst type, temperature, and monomer/catalyst ratio are studied. The moderate molecular weight polymers are achieved when the polymerizations are conducted under bulk conditions employing the Grubbs first generation (G1) or Hoveyda–Grubbs second generation catalyst (HG‐2). In the solution case, on the other hand, low molecular weight polymers are obtained regardless of the catalyst type. Moreover, when the catalyst performances are compared, it is found that G1 produces the higher molecular weight as well as higher yield polymers with respect to the HG‐2.
