Novel π‐conjugated coil–rod–coil triblock oligomers containing optoelectronic active oligoaniline segments were synthesized. The block oligomer can self‐assemble into diverse aggregating morphologies including spherical micelles and thin‐layer vesicles in THF, which is found associated with the removing of the protecting groups of oligoaniline segments. A possible mechanism was proposed to explain the self‐assembly behavior changes in which chain conformation variation of the aniline segments initiated from deprotection of the nitrogen atoms is pointed to be the key factor that dominates the transition process.
Polymeric core–shell microstructures have been constructed through a new method, namely sequential precipitation, which is intrinsically a self‐assembly and phase separation process. High‐quality poly(vinyldene fluoride)–polycarbonate–lithium perchlorate composite films with spherical core–shell microstructures have been prepared and determined to consist of conducting cores and insulating shells. Because of the percolation effect, the resulting materials present a dielectric constant as high as 104–107 at the threshold.
A functional coil–rod–coil triblock copolymer containing a terfluorene unit as the rigid segment and poly(N‐isopropylacrylamide) (PNIPAAm) as the flexible block was successfully synthesized via reversible addition–fragmentation chain‐transfer (RAFT) polymerization using terfluorene‐based dithioester as the RAFT agent. The temperature‐responsive optical properties were investigated with the aid of dynamic light scattering and fluorescence techniques. Additionally, the relationship between the optical properties and the reversible phase transition of the doping system formed by blending the copolymer with tetraphenylporphine tetrasulfonic acid was studied. Above the lower critical solution temperature, the energy transfer efficiency decreased as a result of the globule–to–coil transition from PNIPAAm segments. The result indicates that these copolymers have a potential to be used as responsive fluorescent probes in facile detection of dye‐labeled biopolymers.
Summary: A series of novel mesogen‐jacketed liquid crystal miktoarm star rod‐coil block copolymers were synthesized via atom transfer radical polymerization (ATRP). Their architectures {coil conformation of styrene segment and rigid rod conformation of {2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) segment} were confirmed by GPC, 1H NMR, and MALDI‐TOF studies. The liquid crystalline behaviors of the synthesized copolymers are evidenced from POM observation. The liquid crystalline phase depends on the molecular weights of the rigid rod arm of miktoarm star copolymers.
A rod‐coil‐rod block copolymer, polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate, of controlled molecular weight was synthesized quantitatively via living anionic polymerization using potassium naphthalenide in the presence of sodium tetraphenylborate. The use of K+ as the counterion for the polymerization of styrene, and Na+ (NaBPh4) for the polymerization of isocyanate leads to the formation of a well‐controlled novel triblock copolymer.
Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.
Novel luminescent electrospun (ES) fibers have been successfully prepared from a conjugated rod–coil block copolymer, poly[2,7‐(9,9‐dihexylfluorene)]‐block‐poly(methyl methacrylate) (PF‐b‐PMMA) using a single‐capillary spinneret. Experiment results indicate that PF‐b‐PMMA ES fibers prepared from THF, THF/DMF (50/50), and DMF contain PF block aggregated structures of dot‐like (5–10 nm), line‐like (10–20 nm), and ellipse‐like structure (25–50 nm), respectively. Such variation of aggregation size leads to a red‐shift of the absorption or luminescence spectra. In addition, the fiber diameters decrease upon enhancing the DMF content. The present study demonstrates that blue light‐emitting ES fibers are successfully prepared from conjugated rod–coil diblock copolymers and their aggregate morphology and photophysical properties could be tuned through use of selective solvent.
We describe a new synthesis that allows the preparation of oligo(p‐benzamide)s up to the heptamer on solid support without the need of semi‐temporary amide N‐protective groups. With increase in length, the solubility of oligo(p‐benzamide)s reduces dramatically. Even the tetra(p‐benzamide) is not soluble in common organic solvents. Therefore, solution syntheses of oligomers beyond the tetramer are not feasible. As will be shown in this paper, solid supported synthesis allows the preparation of even longer oligomers (up to the heptamer) in good yields. The high dilution on the solid support is most likely responsible for their pseudo‐solution‐like reactivity and the prevention of aggregation. This procedure is a significant improvement of previous syntheses and an important tool for the rapid exploration of supramolecular rod–coil copolymers based on oligoaramides.
The polydomain–monodomain (PM) transformation takes place when a polydomain of a smectic‐C main‐chain liquid‐crystalline elastomer (SmC MCLCE) is uniaxially stretched. We present results based on a combination of mechanical and X‐ray experiments which show how the domains initially rearrange to finally form a perfect conical layer distribution (monodomain) when the sample is fully stretched. The rearrangement and orientational process of the domains is quantified and compared to the parallel and perpendicular uniaxial stress–strain deformations of a monodomain sample. The stress–strain behaviour of the polydomain lays between the uniaxial deformations, parallel and perpendicular to the director, of the monodomain sample.
In this study, highly stable gold and silver nanoparticles evenly distributed within a crosslinked poly(acrylamide)/poly(N‐(hydroxymethyl)acrylamide) (PAAm‐PHMAAm) network have been fabricated without addition of a reducing agent. Remarkably, the same chemical hydrogel composition has been involved in the successful fabrication of spherical gold and silver nanoparticles within the hydrogel template. The hydrogel network acts simultaneously as an efficient reducing agent and stabilizer. The PAAm–PHMAAm hydrogel network binds metal ions and, following reduction of bound to crosslinked template metal ions, proceeds via oxidation of hydroxymethyl hydrogel fragments. A one‐electron mechanism is proposed for the formation of the silver and gold nanoparticles.
In this communication, the synthesis, characterization, and properties of highly conductive core–shell nanocomposites of poly(N‐vinylcarbazole) (PNVC)–polypyrrole (PPY) copolymers with multi‐walled carbon nanotubes (MWCNTs) are described. A unique free‐radical coupling reaction between PNVC and PPY cation radicals in chloroform solvent, using feric chloride as an oxidant, in the presence of suspended MWCNTs in the reaction medium, was used for the synthesis of nanocomposite. Field‐emission scanning and transmission electron microscopy studies showed the formation of the core–shell nanocomposite. Raman spectrocopy results as well as thermogravimetric analysis supported the electron microscopic observations. The resulting PNVC–PPY copolymer‐coated MWCNTs showed an unprecedentedly increased value of direct electrical conductivity (bulk) compared to the conductivity of all samples even with pure MWCNTs.
Cystamine, when employed as a cross‐linking agent, leads to poly(amidoamine) networks, which on reaction with 2,2′‐dithiodipyridine turn into linear poly(amidoamine)s with side dithiopyridyl groups that easily undergo exchange reactions with reduced L ‐glutathione, a model thiol‐containing biologically active peptide. The resultant products represent the first examples of soluble poly(amidoamine)–peptide conjugates in which the peptide moieties are linked to the polymer chain by S S bonds stable in blood, but cleavable inside cells.
Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.
Opal–inverse opal interlocked composites consisting of opals of hollow spheres with window channels interlocked, have displayed new properties. A facile and general method has been reported to synthesize the ordered composites. Polymer shells are first grown onto the surface of a silica sphere of an opal template by ATRP, which is followed by a sequential modification of the shells resulting in functional groups. Composite shells are favorably synthesized within the functional polymer shells. After the removal of silica opal templates, opal–inverse opal interlocked structures with varied compositions of polymers, inorganic materials, and carbon are achieved.
Summary: Dissipative particle dynamics simulations were performed to study the effect of shear on the rheological behavior of multicompartment micellar solutions, demonstrating that both shear thickening and thinning can occur, and the macroscopic behavior was elucidated at a molecular level. In addition, a novel shear‐induced morphology of “sphere‐on‐rod” was observed. This work provides useful information towards a complete understanding of the properties and morphologies of multicompartment micelles that is useful for future rational synthesis of novel micelles.
Shear‐induced morphological transitions and rheological behavior in multicompartment micellar solutions formed from star triblock copolymers. 相似文献
Based on their rigid‐rod structure all‐conjugated, rod‐rod block copolymers show a preferred tendency to self‐assemble into low‐curvature vesicular or lamellar nanostructures independent from their specific chemical structure and composition. This unique and attractive behaviour is clearly illustrated in a few examples of such all‐conjugated block copolymers. The resulting nanostructured heteromaterials may find applications in electronic devices or artificial membranes.
Well‐defined “smart” block copolymer–protein conjugates were prepared by two consecutive “grafting‐from” reactions via reversible addition–fragmentation chain transfer (RAFT) polymerization. The initiating portion (R‐group) of the RAFT agent was anchored to a model protein such that the thiocarbonylthio moiety was readily accessible for chain transfer with propagating chains in solution. Well‐defined polymer‐protein conjugates of poly(N‐isopropylacrylamide) (PNIPAM) and bovine serum albumin (BSA) were prepared at room temperature in aqueous media. The retained trithiocarbonate moiety on the free end group of the immobilized polymer allowed the homopolymer conjugate to be extended by polymerization of N,N‐dimethylacrylamide. Polyacrylamide gel electrophoresis, size exclusion chromatography, and NMR spectroscopy confirmed the synthesis of the various conjugates and revealed that the polymerizations were well controlled. As expected, the resulting block copolymer–protein conjugates demonstrated thermoresponsive behavior due to the temperature‐sensitivity of the PNIPAM block, as evidenced by turbidity measurements and dynamic light scattering analysis.
Supramolecular complexes of a poly(tert‐butoxystyrene)‐block‐polystyrene‐block‐poly(4‐vinylpyridine) triblock copolymers and less than stoichiometric amounts of pentadecylphenol (PDP) are shown to self‐assemble into a core–shell gyroid morphology with the core channels formed by the hydrogen‐bonded P4VP(PDP)complexes. After structure formation, PDP was removed using a simple washing procedure, resulting in well‐ordered nanoporous films that were used as templates for nickel plating.
In this work, we design and synthesize a kind of amphiphilic mushroom cap‐shaped particles with wettability difference on the opposite sides of the particles. Colloidal crystals consisting of uniformly oriented anisotropic particles were fabricated on the water–air interface based on the wettability difference of particles. This simple approach offers a new way for self‐assembly of anisotropic colloidal crystal by amphiphilic design of particles.
