Novel Amphiphilic Degradable Poly(ε‐caprolactone)‐graft‐poly(4‐vinyl pyridine), Poly(ε‐caprolactone)‐graft‐poly(dimethylaminoethyl methacrylate) and Water‐Soluble Derivatives

New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.

     

Poly(4‐vinylpyridine) Nanocrosslinked by Polyhedral Oligomeric Silsesquioxane

Summary: Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used as the crosslinking agent to prepare the nanocrosslinked poly(4‐vinylpyridine) (P4VP) with POSS content up to 55.2 wt.‐%. The formation of the crosslinked structure is ascribed to the macromolecular reaction between pyridine rings of P4VP and epoxide groups of OpePOSS. The POSS‐crosslinked P4VP displayed enhanced glass transition temperatures (T_gs) and an improved thermal stability in terms of the results of thermal analysis.

Crosslinking of poly(4‐vinylpyridine) with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane.     

New Stimuli Responsive Poly(1‐vinylpyrrolidin‐2‐one) Bearing Pendant Activated Disulfide Groups

Summary: A novel functionalised poly(1‐vinylpyrrolidin‐2‐one) (PVP) derivative, carrying a pre‐determined amount of 2‐(2‐pyridinyldithio)ethylamine moieties as side substituents, P(VP‐co‐VP‐SS‐Py), has been prepared from carboxylated VP copolymers, in turn obtained by copolymerising 1‐vinylpyrrolidin‐2‐one with 3,3‐di‐(ethoxycarbonyl)‐1‐vinylpyrrolidin‐2‐one in the presence of radical initiators. Using reaction solvents acting in the mean time as chain transfer agents could control its molecular weight. P(VP‐co‐VP‐SS‐Py) proved to be extremely reactive towards exchange reactions with molecules containing mercapto functions, including bioactive peptides. The exchange derivative with reduced glutathione, chosen as a model compound, was easily prepared.

     

Crystallization of Poly(ε‐caprolactone)/Poly(vinyl chloride) Miscible Blends Under Strain: The Role of Molecular Weight

Summary: The effect of poly(ε‐caprolactone) (PCL) molecular weight on the orientation of crystalline PCL in miscible poly(ε‐caprolactone)/poly(vinyl chloride) (PCL/PVC) blends, melt crystallized under strain, has been studied by a combination of wide angle X‐ray diffraction (WAXD) and small angle X‐ray scattering (SAXS) studies. An unusual crystal orientation with the b‐axis parallel to the stretching direction was observed in miscible PCL/PVC blends with PCL of high molecular weight (>21 000). SAXS showed the presence of nanosize confined PCL in the PCL/PVC blends, which could be preserved at temperatures higher than the T_m of PCL but lower than the T_g of PVC. A mechanism based on the confinement of PCL crystal growth was proposed, which can explain the formation of b‐axis orientation in PCL/PVC blends crystallized under strain.

SAXS pattern of stretched PCL/PVC blend after annealing at 90 °C for 5 min.     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

The Self‐Assembled Structure of the Diblock Copolymer PCL‐b‐P4VP Transforms Upon Competitive Interactions with Octaphenol Polyhedral Oligomeric Silsesquioxane

This paper describes the miscibility and self‐assembly, mediated by hydrogen‐bonding interactions, of new block copolymer/nanoparticle blends. The morphologies adopted by the immiscible poly[(ε‐caprolactone)‐block‐(4‐vinyl pyridine)] (PCL‐b‐P4VP) diblock copolymer changes upon increasing the number of competitive hydrogen‐bonding interactions after adding increasing amounts of octaphenol polyhedral oligomeric silsesquioxane (OP‐POSS). Transmission electron microscopy reveals morphologies that exhibit high degrees of long‐range order, such as cylindrical and spherical structures, at relatively low OP‐POSS contents, and short‐range order or disordered structures at higher OP‐POSS contents. Analyses performed using differential scanning calorimetry, wide‐angle X‐ray diffraction, and FT‐IR spectroscopy provide positive evidence that the pyridyl units of the P4VP block are significantly stronger hydrogen‐bond acceptors toward the OH group of OP‐POSS than are the CO groups of the PCL block, thereby resulting in excluded and confined PCL phases.

     

A Cationic Water‐Soluble Poly(p‐phenylenevinylene) Derivative: Highly Sensitive Biosensor for Iron‐Sulfur Protein Detection

Summary: A new water‐soluble cationic ammonium‐functionalized poly(p‐phenylenevinylene) (PPV‐NEtMe) was successfully synthesized and exhibited high sensitivity (K_sv = 6.9 × 10⁷ M ⁻¹) on rubredoxin, a type of anionic iron‐sulfur (Fe‐S) proteins. Further investigation showed that the biosensitivity of the cationic conjugated polymer is strongly dependent on the nature of the buffer solution and the concentration of the conjugated polymer used in the analyses.

The schematic diagram of anionic rubredoxin detected by PPV‐NEtMe.     

Synthesis and Characterization of α,ω‐Heterofunctional Poly(ethylene oxide) Macromonomers

A novel α,ω‐heterofunctional poly(ethylene oxide) (PEO) macromonomer possessing methacryloyl and thienyl end groups was prepared by ring‐opening polymerization of ethylene oxide initiated by potassium thienylethoxide and termination of the living PEO ends with methacryloyl chloride. Incorporation of methacryloyl and thienyl groups was confirmed by free‐radical and oxidative polymerization processes, respectively, and by means of ¹H NMR analysis.

     

Nano Grape Formation by isotactic‐Poly(methacrylic acid)‐block‐Poly(butyl acrylate)

A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.

     

Preparation of Poly(ε‐caprolactone)/Clay Nanocomposites by Microwave‐Assisted In Situ Ring‐Opening Polymerization

PCL/clay nanocomposites were prepared by microwave‐assisted in situ ROP of ε‐caprolactone in the presence of either unmodified clay (Cloisite® Na⁺) or clay modified by quaternary ammonium cations containing hydroxyl groups (Cloisite 30B). This PCL showed significantly improved monomer conversion and molecular weight compared with that produced by conventional heating. An intercalated structure was observed for the PCL/Cloisite Na⁺ nanocomposites, while a predominantly exfoliated structure was observed for the PCL/Cloisite 30B nanocomposites. Microwave irradiation proved to be an effective and efficient method for the preparation of PCL/clay nanocomposites.

     

Thermally Tunable Surface Wettability of Electrospun Fiber Mats: Polystyrene/Poly(N‐isopropylacrylamide) Blended versus Crosslinked Poly[(N‐isopropylacrylamide)‐co‐(methacrylic acid)]

This work reports on thermally tunable surface wettability of electrospun fiber mats of: polystyrene (PS)/poly(N‐isopropylacrylamide) (PNIPA) blended (bl‐PS/PNIPA) and crosslinked poly[(N‐isopropylacrylamide)‐co‐[methacrylic acid)] (PNIPAMAA) (xl‐NIPAMAA). Both the bl‐PS/PNIPA and xl‐PNIPAMAA fiber mats demonstrate reversibly switchable surface wettability, with the bl‐PS/PNIPA fiber mats approaching superhydrophobic ≥150° and superhydrophilic contact angle (CA) values at extreme temperatures. Weight loss studies carried out at 10 °C indicate that the crosslinked PNIPAMAA fiber mats had better structural integrity than the bl‐PS/PNIPA fiber mats. PNIPA surface chemistry and the Cassie–Baxter model were used to explain the mechanism behind the observed extreme wettability.

     

Observations on Solution Crystallization of Poly(vinyl alcohol) in the Presence of Single‐Wall Carbon Nanotubes

PVA/SWNT dispersions yield aloe plant‐like crystals, where the leaves are single crystals templated by PVA coated SWNT. Longer growth times (≈18 months) lead to hexagonal rod‐like crystals. HR‐TEM images show evidence that PVA molecules are aligned parallel to the SWNT axis. WAXD, electron diffraction, and HR‐TEM observations of these aloe plant and hexagonal crystals suggests evidence for possible PVA‐SWNT epitaxy. Wide‐angle and electron diffraction data of these crystals also show that the structure seems to mimic the 2D hexagonal crystal packing of SWNT. PVA lattice images and moiré fringes were also observed in the leaf‐like crystals.

     

Synthesis and Characterization of Amphiphilic Biodegradable Copolymer,Poly(aspartic acid‐co‐lactic acid)

An amphiphilic biodegradable polymer, poly(aspartic acid‐co‐lactic acid) (PAL), was synthesized by simply heating a mixture of aspartic acid (Asp) and L ‐lactide without additional catalysts or solvents. The unique branched architecture comprising succinimide units and lactic acid units was confirmed by IR and NMR spectroscopy. A copolymer of sodium aspartate and lactic acid (PALNa) was prepared by reacting PAL with an aqueous sodium hydroxide solution. The PAL was soluble in many organic solvents, while the PALNa was soluble in methanol and water. The hydrolytic degradation behavior of PAL varied with the copolymer composition. A higher Asp content resulted in a faster molecular weight decrease, and introducing glycolic acid units accelerated the degradation rate.

Microphotograph of microsphere of PAL‐1/5.     

Thermoreversibly Crosslinked Poly(ε‐caprolactone) as Recyclable Shape‐Memory Polymer Network

A new concept to build shape memory polymers (SMP) combining outstanding fixity and recovery ratios (both above 99% after only one training cycle) typical of chemically crosslinked SMPs with reprocessability restricted to physically crosslinked SMPs is demonstrated by covalently bonding, through thermoreversible Diels–Alder (DA) adducts, star‐shaped poly(ε‐caprolactones) (PCL) end‐functionalized by furan and maleimide moieties. A PCL network is easily prepared by melt‐blending complementary end‐functional star polymers in retro DA regime, then by curing at lower temperature to favour the DA cycloaddition. Such covalent network can be reprocessed when heated again at the retro DA temperature. The resulting SMP shows still excellent shape memory properties attesting for its good recyclability.

     

Novel Chromophore‐Functionalized Poly[2‐(trifluoromethyl) adamantyl acrylate‐methyl vinyl urethane]s with High Poling Stabilities of the Nonlinear Optical Effect

Nonlinear optical vinyl polymers with high glass transition temperature (T_g) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.

The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here.     

Single‐Chain‐Particles of Poly(N‐isopropylacrylamide)

Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.

Schematic of the preparation of PNIPAM single‐chain‐globules in solution.     

Thermo‐Responsive Hydrogels with Nanodomains: Rapid Shrinking of a Nanogel‐Crosslinking Hydrogel of Poly(N‐isopropyl acrylamide)

Rapidly shrinking poly(N‐isopropyl acrylamide) (PNIPAM) hydrogels are prepared by crosslinking with self‐assembled nanogels that consist of cholesteryl‐ and methacryloyl‐substituted pullulan (CHPMA). The CHPMA nanogel (R_h = 26.4 nm) was used as a crosslinker for a hydrophilic nanodomain. Transmission electron microscopy images of the nanogel‐crosslinked PNIPAM hydrogel reveal a well‐defined nanoporous structure. The nanogel‐crosslinked PNIPAM hydrogel shows rapid shrinking based on its structure. The shrinking half‐time was ≈2 min, which is about 3 400 times faster than that of a PNIPAM hydrogel crosslinked by methylene(bisacrylamide).

     

Construction of Large‐Scale Highly Ordered Macroporous Monoliths of π‐Conjugated Polymers

Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.

     

Poly(p‐phenylenevinylene) Derivatives with Defined Conjugation Segments and Post‐Polymerization Modification with Sterically Enshrouded Chromophores

Two poly(p‐phenylenevinylene) derivative alternating copolymers ( P1‐I and P2‐I ) have been prepared featuring iodo substituents and m‐phenylene units to periodically disrupt conjugation. P1‐I was derivatized with various chromophores to yield P1a‐f . In P1a‐f , the chromophores were positioned within a sterically protected pocket shielding them from interchain interactions so that intrachain interactions between polymer segments could be observed. Solution and film properties of polymers have been examined. Post‐polymerization chromophore modification leads to new photophysical properties such as intramolecular charge transfer and fluorescent resonance energy transfer processes in some cases.