经两亲嵌段共聚物自组装制备纳米胶束

本文介绍两亲嵌段共聚物的合成,综述了经两亲嵌段共聚物自组装制备纳米胶束的研究进展,并对该领域的发展趋势进行了展望。     

两亲嵌段共聚物胶束用作医用材料

两亲嵌段共聚物可以在水溶液中自组装形成亲水性链段为外壳、疏水性链段为内核的胶束,这种胶束能够用作药物载体而引起人们极大的关注。本文综述了两亲嵌段共聚物胶束用作医用材料的研究进展,主要内容包括医用两亲嵌段共聚物的种类,胶束化,以及用作诊断试剂载体、药物缓释载体、靶向载体等。两亲嵌段共聚物胶束用作磁共振造影剂载体有利于肿瘤的诊断,用作药物缓释载体可以有效增溶难溶性抗肿瘤药物,延长药物在体内的血液循环时间。此外,通过对胶束表面进行修饰或者施加外场,还可以实现靶向功能。因此,两亲嵌段共聚物胶束在医用材料领域有着广阔的发展前景。     

Phenylboronic‐Acid‐Modified Amphiphilic Polyether as a Neutral Gene Vector

A phenylboronic‐acid‐modified amphiphilic block polyether is prepared via reaction of polyglycidol‐block‐poly(ethylene oxide)‐block‐poly(propylene oxide)‐block‐poly(ethylene oxide)‐block‐polyglycidol (Pluronic‐PG) with 2‐(N,N‐dimethylaminomethyl)‐5‐aminomethyl phenylboronic acid using phosgene as a coupling reagent. The boronic‐acid‐modified non‐cationic polymer binds plasmid pGL3 effectively, forms sub‐µm polymer/DNA complex particles, and greatly facilitates the cell uptake of the plasmid. The efficiency of the polymer as a gene vector is evaluated in vitro by transfection of pGL3 to HeLa, COS‐7 and HepG2 cells. Pluronic‐PG‐BA enhances the transfection efficiency by 100 to 1000 times compared with Pluronic‐PG. The presence of serum does not significantly affect the transfection efficiency.

     

Diblock Copolymer Micelles with Ionic Amphiphilic Corona

Summary: Aqueous dispersions of diblock copolymer micelles with homogeneous hydrophobic core (polystyrene) and heterogeneous amphiphilic corona from ionic N-ethyl-4-vinylpyridinium bromide (EVP) and hydrophobic 4-vinylpyridine (4VP) units have been prepared at pH 9. The structure and dispersion stability of micelles as function of the ratio and distribution pattern of ionic and hydrophobic units in corona have been systematically studied by means of transmission electron microscopy, static and dynamic light scattering, UV-spectrophotometry techniques. It was shown that gradual decrease of the quantity of EVP-units in corona had no impact on micelle structure until its fraction was above 0.7. When EVP-fraction dropped below this point noticeable changes in micelle mass and dimensions were observed. In the case of random distribution of 4VP and EVP units these changes were moderate in value and jump-like in character. In the case of mictoarm (starlike) distribution of 4VP and EVP blocks changes were large in value and monotonous in character. The presented results may be of certain use for design of polymer micelles with nanosegregated corona.     

Amphiphilic diblock,triblock, and star block copolymers by living radical polymerization: Synthesis and aggregation behavior

Copper(I)‐mediated living radical polymerization was used to synthesize amphiphilic block copolymers of poly(n‐butyl methacrylate) [P(n‐BMA)] and poly[(2‐dimethylamino)ethyl methacrylate] (PDMAEMA). Functionalized bromo P(n‐BMA) macroinitiators were prepared from monofunctional, difunctional, and trifunctional initiators: 2‐bromo‐2‐methylpropionic acid 4‐methoxyphenyl ester, 1,4‐(2′‐bromo‐2′‐methyl‐propionate)benzene, and 1,3,5‐(2′‐bromo‐2′‐methylpropionato)benzene. The living nature of the polymerizations involved was investigated in each case, leading to narrow‐polydispersity polymers for which the number‐average molecular weight increased fairly linearly with time with good first‐order kinetics in the monomer. These macroinitiators were subsequently used for the polymerization of (2‐dimethylamino)ethyl methacrylate to obtain well‐defined [P(n‐BMA)_x‐b‐PDMAEMA_y]_z diblock (15,900; polydispersity index = 1.60), triblock (23,200; polydispersity index = 1.24), and star block copolymers (50,700; polydispersity index = 1.46). Amphiphilic block copolymers contained between 60 and 80 mol % hydrophilic PDMAEMA blocks to solubilize them in water. The polymers were quaternized with methyl iodide to render them even more hydrophilic. The aggregation behavior of these copolymers was investigated with fluorescence spectroscopy and dynamic light scattering. For blocks of similar comonomer compositions, the apparent critical aggregation concentration (cac = 3.22–7.13 × 10^?3 g L^?1) and the aggregate size (ca. 65 nm) were both dependent on the copolymer architecture. However, for the same copolymer structure, increasing the hydrophilic PDMAEMA block length had little effect on the cac but resulted in a change in the aggregate size. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 439–450, 2002; DOI 10.1002/pola.10122     

Perfluorocyclobutyl-containing Amphiphilic Block Copolymers Synthesized by RAFT Polymerization

Amphiphilic block copolymers containing hydrophobic perfluorocyclobutyl‐based (PFCB) polyacrylate and hydrophilic poly(ethylene glycol) (PEG) segments were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The PFCB‐containing acrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)‐phenyl acrylate, was first synthesized from commercially available compounds in good yields, and this kind of acrylate monomer can be homopolymerized by free radical polymerization or RAFT polymerization. Kinetic study showed the 2,2′‐azobis(isobutyronitrile) (AIBN) initiated and cumyl dithiobenzoate (CDB) mediated RAFT polymerization was in a living fashion, as suggested by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer, while the polydispersity indices kept less than 1.10. The block polymers with narrow molecular weight distributions (M_w/M_n≦1.21) were prepared through RAFT polymerization using PEG monomethyl ether capped with 4‐cyanopentanoic acid dithiobenzoate end group as the macro chain transfer agent (mPEG‐CTA). The length of the hydrophobic segment can be tuned by the feed ratio of the PFCB‐based acrylate monomer and the extending of the polymerization time. The micellization behavior of the block copolymers in aqueous media was investigated by the fluorescence probe technique.     

“双亲性”嵌段共聚物胶束形貌调控的研究*

本文综述了“双亲性”嵌段共聚物在选择性溶剂中胶束行为和胶束形貌的主要影响因素,包括溶液温度、选择性溶剂种类、嵌段长度、链段结晶、链段与溶剂间氢键作用以及共聚物浓度对胶束最终形貌产生影响的因素;系统介绍了对嵌段共聚物胶束形貌进行调控的实验方法;在此同时介绍了对环境刺激如温度和pH变化等具有响应性能的“双亲性”嵌段共聚物在选择性溶剂中胶束行为研究的最新进展;最后提出了该研究领域目前存在的问题和今后的可能发展方向。     

双亲性无规离聚物溶液的自组装

由可离子化单体甲基丙烯酸二甲胺乙酯(DMAM)、甲基丙烯酸羟丙酯(HPMA)、疏水性单体丙烯酸异辛酯(EHA)、苯乙烯(St)为共聚单体进行自由基溶液共聚,合成了一系列四元双亲性无规共聚物P(DMAM-co-HPMA-co-EHA-co-St),简称PDHES.以红外光谱、核磁共振、凝胶渗透色谱和差示扫描量热等对共聚物进行了表征;PDHES经乳酸离子化得到荷正电的离聚物PIDHES,以该离聚物在选择性溶剂(N,N-二甲基甲酰胺/水)中进行自组装,得到球形胶束.用紫外光谱仪、动态激光光散射仪、透射电镜和扫描电镜等对其组装过程和结果进行表征,考察了DMAM含量、PDHES离子化程度、离聚物溶液的初浓度等因素对胶束的形成、胶束临界聚集水含量(CWC)和胶束流体动力学半径(Rh)的影响.研究了该离聚物胶束粒子在电场诱导作用下的2次组装行为,考察了不同胶束浓度与电诱导时间对其2次组装行为的影响.     

Aqueous Self‐Assembly of Y‐Shaped Amphiphilic Block Copolymers into Giant Vesicles

The preparation and aqueous self‐assembly of newly Y‐shaped amphiphilic block polyurethane (PUG) copolymers are reported here. These amphiphilic copolymers, designed to have two hydrophilic poly(ethylene oxide) (PEO) tails and one hydrophobic alkyl tail via a two‐step coupling reaction, can self‐assemble into giant unilamellar vesicles (GUVs) (diameter ≥ 1000 nm) with a direct dissolution method in aqueous solution, depending on their Y‐shaped structures and initial concentrations. More interesting, the copolymers can self‐assemble into various distinct nano‐/microstructures, such as spherical micelles, small vesicles, and GUVs, with the increase of their concentrations. The traditional preparation methods of GUVs generally need conventional amphiphilic molecules and additional complicated conditions, such as alternating electrical field, buffer solution, or organic solvent. Therefore, the self‐assembly of Y‐shaped PUGs with a direct dissolution method in aqueous solution demonstrated in this study supplies a new clue to fabricate GUVs based on the geometric design of amphiphilic polymers.

     

Amphiphilic AxBy mikto-arm star copolymers with PLMA and POEGMA arms: Self-assembly and drug encapsulation

We report on the synthesis and self-assembly of amphiphilic mikto-arm star copolymers of the A_xB_y type with mixed arms of poly(lauryl methacrylate) and poly(oligo ethylene glycol methacrylate). Two star copolymers with different hydrophobic-to-hydrophilic ratios are prepared in order to study their self-assembly in aqueous media. Both stars organize in structures with dimensions in the nanoscale. The star with the lower hydrophobic content forms aggregates of lower size and molar mass and it has a higher critical aggregation concentration. The synthesized mikto-arm stars are able to encapsulate curcumin (CUR) and preserve its fluorescence properties while their self-organization is affected by the incorporation of the hydrophobic drug compound. Interestingly, the more hydrophilic star is more strongly affected by the presence of CUR in terms of aggregate size and mass. In phosphate buffered saline (PBS) and fetal bovine serum-PBS solutions the star with higher hydrophobic content appears to better preserve its monomodal size distribution in comparison to the star with lower hydrophobic content either with or without encapsulated CUR. This work opens possibilities for using the new star copolymers in the solubilization of hydrophobic compounds and the delivery of hydrophobic drugs for pharmaceutical and bioimaging applications.     

两亲嵌段共聚物溶液自组装新进展

综述了两亲嵌段共聚物在溶液中自组装的新进展，重点介绍了两亲嵌段共聚物自组装聚集体中棒状、蠕虫状、囊泡、洋葱和实心洋葱等几种新形态的特点和形成机理；另外对两亲嵌段共聚物溶液自组装在光电、药物释放、靶向以及作为基因工程载体方面的应用前景及两亲嵌段共聚物聚集体的制备方法作了详细的评述。     

Synthesis of Well‐defined Amphiphilic Block Copolymers by Organotellurium‐Mediated Living Radical Polymerization (TERP)

Low‐molecular weight amphiphilic diblock copolymers, polystyrene‐block‐poly (2‐vinylpyridine) (PS‐b‐P2VP), and (P2VP‐b‐PS) with different block ratios were synthesized for the first time via organotellurium‐mediated living radical polymerization (TERP). For both the homo‐ and block copolymerizations, good agreement between the theoretical, and experimental molecular weights was found with nearly 100% yield in every case. The molecular weight distribution for all the samples ranged between 1.10 and 1.24, which is well below the theoretical lower limit of 1.50 for a conventional free radical polymerization. Furthermore, a very simple approach to producing highly dense arrays of titania nanoparticles (TiO₂) is presented using a site‐selective reaction of titanium tetraisopropoxide within the P2VP domains of micellar film of P2VP‐b‐PS in toluene through the sol–gel method.

     

Amphiphilic copolymers with increased affinity for substrates

The copolymers of methyl quaternized 2-dimethylaminoethyl acrylate and styrene, 2-vinyl naphthalene, acrylic acid iso-octyl ester, or acrylic acid n-butyl ester have been prepared. Studies were made of the binding of a “binding probe,” methyl orange, by the copolymers in aqueous solution. The first binding constants and the thermodynamic parameters in the course of the binding were evaluated. Furthermore, the intensity of fluorescence of a hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate, in the presence of these polymers was investigated. In addition, the fluorescence spectra of monomer and excimer emissions of the polymers with aromatic residues were measured. The excimer/monomer fluorescence intensity ratio was studied in the presence of various additives such as methyl orange, urea, methanol, and NaCl to gain an insight into the nature of microdomains in the polymer. The nature and phenomena of dye binding and hydrophobic fluorescent probe binding with the polymers are discussed. © 1993 John Wiley & Sons, Inc.     

Mesoscopic Simulations of Lamellar Orientation in Block Copolymers

Mesoscopic simulation techniques are employed to investigate lamellar orientation in block copolymers subjected to oscillatory shear. Dynamic mean‐field density functional theory (MesoDyn) is able to capture parallel lamellar and perpendicular lamellar states at low and higher shear rates. At higher shear rates a third orientation state is identified from cell dynamics and MesoDyn simulations, and corresponds to predominantly parallel‐aligned lamellae. This is explained on the basis of partial shear‐melting at higher shear rates. The results are compared to the lamellar alignment diagram obtained experimentally for polystyrene/polyisoprene block copolymers.     

Direct Observation of Dye-Containing Amphiphilic Copolymer in the Honeycomb-Patterned Film

Honeycomb-patterned film was prepared by casting chloroform solution of hydrophobic polymer and dye-containing amphiphilic copolymer under humid conditions. The confocal laser scanning microscopy image shows that amphiphilic copolymer is localized around the pores of the honeycomb-patterned film.     

Novel Amphiphilic Diblock and Triblock Liquid‐Crystalline Copolymers with Well‐Defined Structures Prepared by Atom Transfer Radical Polymerization

Summary: Based on a hydrophilic poly(ethylene oxide) macroinitiator (PEOBr), a novel amphiphilic diblock copolymer PEO‐block‐poly(11‐(4‐cyanobiphenyloxy)undecyl) methacrylate) (PEO‐b‐PMA(11CB)) was prepared by atom transfer radical polymerization (ATRP) using CuCl/1,1,4,7,10,10‐hexamethyltriethylenetriamine as a catalyst system. An azobenzene block of poly(11‐[4‐(4‐butylphenylazo)phenoxyl]undecyl methacrylate) was then introduced into the copolymer sequence by a second ATRP to synthesize the corresponding triblock copolymer PEO‐b‐PMA(11CB)‐b‐PMA(11Az). Both of the amphiphilic block copolymers had well‐defined structures and narrow molecular‐weight distributions, and exhibited a smectic liquid‐crystalline phase over a wide temperature range.

The amphiphilic triblock copolymer synthesized here.     

聚马来酸酐高级脂肪醇酯的合成及其对聚乙烯的表面改性研究

采用溶液聚合的方法合成聚马来酸酐，考察不同聚合条件对聚马来酸酐产率的影响。将所合成的聚马来酸酐与十八醇、十六醇和十四醇进行酯化反应合成了三种两亲性的大分子表面改性荆聚马来酸酐十八醇酯(PMAO)、聚马来酸酐十六醇酯(PMAH)和聚马来酸酐十四醇酯(PMAT)。对这三种聚马来酸酐高级醇酯／聚乙烯共混体系的表面亲水性进行了研究，采用全反射红外光谱对聚马来酸酐高级醇酯共混体系薄膜进行表征，发现聚马来酸酐高级醇酯可以在聚乙烯薄膜表面富集，接触角测量表明聚马来酸酐高级醇酯的加入可以有效降低聚乙烯薄膜的水接触角。     

两亲性嵌段共聚物的合成及其在离子液体中的自组装行为

采用阴离子开环聚合法合成了两亲性嵌段共聚物PLA-PEG-PLA.用FT-IR,1H NMR和GPC等手段对嵌段共聚物的结构组成进行了表征.两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐中能自组装成胶束,用透射电子显微镜观察了聚合物在离子液体中形成胶束的纳米结构.当疏水链长固定时,胶束的自组装形状主要依赖于亲水链的长度.两亲性共聚物在离子液体中可自组装成可控制结构的纳米胶束,这种纳米结构胶束在很多领域具有广泛的应用前景.