FT‐IR,FT‐Raman and SERS spectra of anilinium sulfate

The FT‐IR and FT‐Raman spectra of anilinium sulfate were recorded and analyzed. The surface‐enhanced Raman scattering (SERS) was recorded from a silver electrode. The vibrational wavenumbers of the compound have been computed using the Hartree‐Fock/6‐31G* basis and compared with the experimental values. The molecule is adsorbed on the silver surface with the benzene ring in a tilted orientation. The presence of amino and sulfate group vibrations in the SERS spectrum reveal the interaction between amino and sulfate groups with the silver surface. The direction of the charge transfer contribution to SERS has been discussed from the frontier orbital theory. Copyright © 2009 John Wiley & Sons, Ltd.     

FT‐IR and FT‐Raman investigations of the chemosensing material para‐hexafluoroisopropanol aniline

As an important chemosensing material involving hexafluoroisopropanol (HFIP) for detecting nerve agents, para‐HFIP aniline (p‐HFIPA) has been firstly synthesized through a new reaction approach and then characterized by nuclear magnetic resonance and mass spectrometry experiments. Fourier transform infrared absorption spectroscopy (FT‐IR) and FT‐Raman spectra of p‐HFIPA have been obtained in the regions of 4000–500 and 4000–200 cm⁻¹, respectively. Detailed identifications of its fundamental vibrational bands have been given for the first time. Moreover, p‐HFIPA has been optimized and vibrational wavenumber analysis can be subsequently performed via density functional theory (DFT) approach in order to assist these identifications in the experimental FT‐IR and FT‐Raman spectra. The present experimental FT‐IR and FT‐Raman spectra of p‐HFIPA are in good agreement with theoretical FT‐IR and FT‐Raman spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional theory study and vibrational analysis of FT‐IR and FT‐Raman spectra of N‐hydroxyphthalimide

The Fourier transform infrared (FT‐IR) spectrum of N‐hydroxyphthalimide has been recorded in the range of 4000–400 cm⁻¹, and the Fourier transform Raman (FT‐Raman) spectrum of N‐hydroxyphthalimide has been recorded in the range of 4000–50 cm⁻¹. With the hope of providing more and effective information on the fundamental vibrations, the Density Functional Theory (DFT)‐Becke3‐Lee‐Yang‐Parr (B3LYP) level with 6‐31G* basis set has been employed in quantum chemical analysis, and normal coordinate analysis has been performed on N‐hydroxyphthalimide by assuming C_s symmetry. The computational wavenumbers are in good agreement with the observed results. The theoretical spectra obtained along with intensity data agree well with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Betulin and its natural resource as potential anticancer drug candidate seen by FT‐Raman and FT‐IR spectroscopy

The Fourier transform Raman and IR spectra of betulin (lup‐20(29)‐ene‐3β,28‐diol) crystalline powder were recorded and analyzed. The vibrational wavenumbers and the corresponding vibrational assignments were theoretically studied using the Gaussian 03 package. The calculated vibrational wavenumbers with the B3LYP density functionals are generally consistent with the observed spectra. A complete vibrational characterization of betulin modes has been proposed here for the first time. Based on the vibrational analysis, two direct applications of the results have been described. It was shown that the outer bark of Betula Pendula Roth (the birch tree) contains betulin as a major component along with minor amounts of betulinic acid (BA), lupeol and other pentacyclic triterpenes derivatives. Since the major disadvantage of betulin is its low solubility, giving rise to serious problems in making pharmaceutical formulations, several guest–host type of complexes of betulin–cyclodextrins have been prepared and analyzed using FT‐Raman spectroscopy. Based on the vibrational analysis, it was concluded that the OH and CH₂OH functional groups are free from chemical interactions with the cyclodextrin cavity. Copyright © 2010 John Wiley & Sons, Ltd.     

FT‐IR,FT‐Raman,and computational calculations of 4‐chloro‐2‐(3‐chlorophenyl carbamoyl)phenyl acetate

FT‐IR and FT‐Raman spectra of 4‐chloro‐2‐(3‐chlorophenylcarbamoyl) phenyl acetate were studied. Vibrational wavenumbers and corresponding vibrational assignments were examined theoretically using the Gaussian03 set of quantum chemistry codes and the normal modes are assigned by potential energy distribution (PED) calculations. Simultaneous IR and Raman activation of the CO stretching mode shows the charge transfer interaction through a π‐conjugated path. Optimized geometrical parameters of the title compound are in agreement with the reported values. Analysis of the phenyl ring modes shows that C C stretching mode is equally active as strong bands in both IR and Raman, which can be interpreted as the evidence of intramolecular charge transfer via conjugated ring path and is responsible for hyperpolarizability enhancement leading to nonlinear optical activity. The red‐shift of the NH‐stretching wavenumber in the infrared spectrum from the computed wavenumber indicates the weakening of the NH bond resulting in proton transfer to the neighboring oxygen atom. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental and theoretical FT‐IR and FT‐Raman spectroscopic analysis of N1‐methyl‐2‐chloroaniline

In this work, the experimental and theoretical vibrational spectra of N1‐methyl‐2‐chloroaniline (C₇H₈NCl) were studied. FT‐IR and FT‐Raman spectra of the title molecule in the liquid phase were recorded in the region 4000–400 cm^?1 and 3500–50 cm^?1, respectively. The structural and spectroscopic data of the molecule in the ground state were calculated by using density functional method (B3LYP) with the 6‐311++G(d,p) basis set. The vibrational frequencies were calculated and scaled values were compared with experimental FT‐IR and FT‐Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. ¹³C and ¹H NMR chemical shifts results were compared with the experimental values. The optimized geometric parameters (bond lengths and bond angles) were given and are in agreement with the corresponding experimental values of aniline and p‐methyl aniline. Copyright © 2008 John Wiley & Sons, Ltd.     

FT‐IR,FT‐Raman and DFT calculations of the salicylanilide derivate 4‐chloro‐2‐(4‐bromophenylcarbamoyl)phenyl acetate

FT‐IR and FT‐Raman spectra of 4‐chloro‐2‐(4‐bromophenylcarbamoyl)phenyl acetate were recorded and analyzed. The vibrational wavenumbers and corresponding vibrational assignments were examined theoretically using the Gaussian03 set of quantum chemistry codes. The red shift of the NH stretching wavenumber in the infrared (IR) spectrum from the computed wavenumber indicates the weakening of the NH bond resulting in proton transfer to the neighbouring oxygen atom. The simultaneous IR and Raman activations of the CO stretching mode give the charge transfer interaction through a π‐conjugated path. Optimized geometrical parameters of the title compound are in agreement with similar reported structures. From the optimized structure, it is clear that the hydrogen bonding decreases the double bond character of CO bond and increases the double bond character of the C N bonds. The first hyperpolarizability, predicted infrared intensities and Raman activities are reported. The calculated first hyperpolarizability is comparable with the reported values of similar derivatives and is an attractive object for future studies of non‐linear optics. The assignments of the normal modes are done by potential energy distribution (PED) calculations. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional and experimental studies on the FT‐IR and FT‐Raman spectra and structure of benzoic acid and 3,5‐dichloro salicylic acid

FT‐IR and FT‐Raman spectra of benzoic acid (BA) and 3,5‐dichloro salicylic acid (SA) have been recorded in the regions of 4000–400 and 4000–50 cm⁻¹ respectively. The spectra were interpreted with the aid of normal coordinate analysis following the full structure optimizations and force field calculations based on density functional theory (DFT) using standard B3LYP6‐31G** method and basis set combinations. The DFT force field transformed to natural internal coordinates was corrected by a well‐established set of scale factors that were found to be transferable to the title compounds. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of the simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Copyright © 2008 John Wiley & Sons, Ltd.     

FT‐Raman,IR and UV‐visible spectral investigations and ab initio computations of a nonlinear food dye amaranth

Amaranth (E123, Food Red 9, FD & C Red 2) is a sulfonated azo dye used as a color additive in foodstuffs, pharmaceuticals and cosmetics. FT‐IR and FT‐Raman spectra of amaranth were recorded and analyzed. Density functional theory (DFT) calculations were performed to derive the equilibrium geometry, vibrational wavenumbers, intensities and first hyperpolarizability. The results of the optimized molecular structure gave clear evidence for the intramolecular charge transfer (ICT) and intramolecular hydrogen bonding in the molecule. Azo stretching wavenumbers are lowered owing to conjugation and π‐electron delocalization. Time‐dependent density functional theory (TD‐DFT) calculations of the electronic spectra were performed on the optimized structure and compared with the experimental UV‐visible spectrum. Vibrational spectra, natural bonding orbitals (NBO) analysis and optimized geometry indicate C H·N hydrogen bonding in the molecule. The first hyperpolarizability of the molecule was calculated. The optical nonlinearity of the dye is due to the donation of the electron density from the hydroxyl group of the conjugated system via naphthalene ( 2 ) ring into π*‐orbital of the azo moiety. Copyright © 2008 John Wiley & Sons, Ltd.     

FT‐IR,FT‐Raman,SERS spectra and computational calculations of 4‐ethyl‐N‐(2′‐hydroxy‐5′‐nitrophenyl)benzamide

Fourier transform infrared (FT‐IR) and FT‐Raman spectra of 4‐ethyl‐N‐(2′‐hydroxy‐5′‐nitrophenyl)benzamide were recorded and analyzed. A surface‐enhanced Raman scattering (SERS) spectrum was recorded in silver colloid. The vibrational wavenumbers and corresponding vibrational assignments were examined theoretically using the Gaussian03 set of quantum chemistry codes. The red shift of the NH stretching wavenumber in the infrared spectrum from the computational wavenumber indicates the weakening of the NH bond resulting in proton transfer to the neighboring oxygen atom. The simultaneous IR and Raman activation of the CO stretching mode gives the charge transfer interaction through a π‐conjugated path. The presence of methyl modes in the SERS spectrum indicates the nearness of the methyl group to the metal surface, which affects the orientation and metal molecule interaction. The first hyperpolarizability and predicted infrared intensities are reported. The calculated first hyperpolarizability is comparable with the reported values of similar derivatives and is an attractive subject for future studies of nonlinear optics. Optimized geometrical parameters of the title compound are in agreement with reported structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Studies on the resonance Raman spectra of polyaniline obtained with near‐IR excitation

The effects of near‐IR (NIR) laser power over the Raman spectra of poly(aniline) emeraldine salt (PANI‐ES) and base (PANI‐EB) were investigated. The reasons for the existence of several bands from 1324 to 1500 cm⁻¹ in the Raman spectra of poly(aniline) obtained at NIR region were also studied. The bands from 1324 to 1375 cm⁻¹ were associated to νC N of polarons with different conjugation lengths and the bands from 1450 to 1500 cm⁻¹ in Raman spectra of PANI emeraldine and pernigraniline base forms were correlated to νCN modes associated with quinoid units having different conjugation lengths. The increase of laser power at 1064.0 nm causes the deprotonation of PANI‐ES and the formation of cross‐linking segments having phenazine and/or oxazine rings. For PANI‐EB only a small spectral change is observed when the laser power is increased, owing to the low absorption of this form in the NIR region. Copyright © 2007 John Wiley & Sons, Ltd.     

Measurement of the absolute Raman scattering cross sections of sulfur and the standoff Raman detection of a 6‐mm‐thick sulfur specimen at 1500 m

The absolute Raman scattering cross sections (σ_RS) for the 471, 217, and 153 cm⁻¹ modes of sulfur were measured as 6.0 ± 1.2 × 10⁻²⁷, 7.7 ± 1.6 × 10⁻²⁷, and 1.2 ± 0.24 × 10⁻²⁶ cm² at 815, 799, and 794 nm, respectively, using a 785‐nm pump laser. The corresponding values of σ_RS at 1120, 1089, and 1081 nm were determined to be 1.5 ± 0.3 × 10⁻²⁷, 1.2 ± 0.24 × 10⁻²⁷, and 1.2 ± 0.24 × 10⁻²⁷ cm² using a 1064‐nm laser. A temperature‐controlled, small‐cavity (2.125 mm diameter) blackbody source was used to calibrate the signal output of the Raman spectrometers for these measurements. Standoff Raman detection of a 6‐mm‐thick sulfur specimen located at 1500 m from the pump laser and the Raman spectrometer was made using a 1.4‐W, CW, 785‐nm pump laser. Copyright © 2010 John Wiley & Sons, Ltd.     

FT‐Raman,FT‐IR spectra and DFT calculations on monomeric and dimeric structures of 5‐fluoro‐ and 5‐chloro‐salicylic acid

The experimental and theoretical study on the structures and vibrations of 5‐fluoro‐salicylic acid and 5‐chloro‐salicylic acid (5‐FSA and 5‐ClSA, C₇H₅FO₃ and C₇H₅ClO₃) is presented. The Fourier transform infrared spectra (4000–400 cm⁻¹) and the Fourier transform Raman spectra (4000–50 cm⁻¹) of the title molecules in the solid phase were recorded. The molecular structures, vibrational wavenumbers, infrared intensities, Raman intensities and Raman scattering activities were calculated for a pair of molecules linked by the intermolecular O H···O hydrogen bond. The geometrical parameters and energies of 5‐FSA and 5ClSA were obtained for all eight conformers/isomers from density functional theory (DFT) (B3LYP) with 6‐311++G(d,p) basis set calculations. The computational results identified the most stable conformer of 5‐FSA and 5‐ClSA as the C1 form. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The spectroscopic and theoretical results were compared with the corresponding properties for 5‐FSA and 5‐ClSA monomers and dimer of C1 conformer. The optimized bond lengths, bond angles and calculated wavenumbers showed the best agreement with the experimental results. Copyright © 2010 John Wiley & Sons, Ltd.     

Micro‐Raman mapping on polished cross sections: a tool to define the penetration depth of conservation treatment on cultural heritage

Nowadays, in order to preserve the surfaces of works of art, several organic and inorganic substances are used. To evaluate the penetration depth and the distribution of these substances inside the materials, it is essential to define the effectiveness of a conservative treatment. Owing to the ambiguous results obtained with the current analytical techniques, the achievement of this aim is critical. This study shows how micro‐Raman mapping on polished cross section is an effective tool capable of investigating the inner portions of the materials. A set of painted plasters has been treated with ammonium oxalate solutions, an inorganic substance widely used for conservation works of carbonatic materials. The micro‐Raman mapping of the lines of the newly formed calcium oxalate allowed correlation of the penetration depth and the distribution of the product inside the specimens with different conditions of treatment. Moreover, a good agreement between micro‐Raman spectroscopy and microscopic techniques has been obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

Identification and spectra–structure determination of soil minerals: Raman study supported by IR spectroscopy and X‐ray powder diffraction

Raman and IR spectroscopy were used for the characterization of several minerals in morphologically similar vertisol sequences from Kiževak (Serbia). It helped us to establish the surface layer transition going from calcic vertisols (containing gypsum and calcite) to calcimagnesic vertisols (containing aragonite, magnesium‐calcite and dolomite) derived from peridotite and serpentinite. The observed band positions are found to be solely characteristic for each carbonate mineral and are used to discuss the main structural features of carbonates and sulfates present in the studied soil. It was found that the dolomite, calcite and aragonite concretions are present in the deepest layer of the soil, whereas the gypsum is found in the topsoil. The identification was confirmed of the carbonates having calcite and aragonite structure, and the representative from the sulfate group (gypsum) was confirmed by X‐ray powder diffraction. Copyright © 2009 John Wiley & Sons, Ltd.     

In‐situ and laboratory Raman analysis in the field of cultural heritage: the case of a mural painting

The present work exemplifies, over a mural painting from the 14th century, the advantages of an initial exhaustive research using latest generation hand‐held spectrometers (Raman mainly) in order to perform the characterization of valuable objects of cultural heritage. These in‐situ techniques (meaning on‐site and non‐destructive) are very useful to study the pigments and materials, to identify the nature and causes of some of the main sources of deterioration and to examine past repaints. In addition, the in‐situ measurements are of great importance in the selection of micro‐samples for the laboratory analyses. In this particular case, the combination of these results with the chemical imaging analyses in the laboratory (such as Raman and energy dispersive X‐ray spectrometry imaging) allowed the characterization of the mural painting, including, the identification of all restoration works applied in the past. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterisation of inorganic pigments in ancient glass beads by means of Raman microspectroscopy,microprobe analysis and X‐ray diffractometry

Ancient coloured glass beads from Sri Lanka and Oman were analysed by Raman microspectroscopy for non‐destructive identification of inorganic pigments in the glass. Calcium phosphate (Ca₃(PO₄)₂), cassiterite (SnO₂), cuprite (Cu₂O) and a Pb(Sn,Si)O₃‐type lead tin oxide were found to be used as colouring agents. Moreover, a distinction between lead‐based and alkali‐based glass matrices could be made. Electron microprobe analysis and X‐ray diffractometry were performed to show the capability of Raman microspectroscopy in comparison to these methods for answering archaeometric questions. Copyright © 2006 John Wiley & Sons, Ltd.