Discrimination of carotenoid and flavonoid content in petals of pansy cultivars (Viola x wittrockiana) by FT‐Raman spectroscopy

Fourier Transform Raman spectroscopy (FT‐Raman) has been applied for the non‐destructive in‐situ analysis of pigments on differently colored flower petals of pansy cultivars (Viola x wittrockiana). The main target of the present study was to investigate how far the Raman mapping technique through FT‐Raman spectroscopy and cluster analysis of the Raman spectra is a potential method for the direct, in‐situ discrimination of flavonoids (flavonols against anthocyanins) and of carotenoids occurring in flowers, using intact and differently colored flower petal of Viola x wittrockiana for this case study. In order to get more information about the reliability of the direct in‐situ flavonoid detection by the Raman method, pigments extracts of the petals were separated by thin‐layer chromatography (TLC) and investigated by Raman spectroscopy. Hierarchical cluster analysis (HCA) of the Raman spectra from reference pigments (carotenoids, anthocyanins and flavonols), from areas of the flower petals, and from the TLC extracts allowed discriminating the various pigments, in particular flavonoids (flavonols against anthocyanins) and carotenoids. With a two‐dimensional Raman mapping technique, which provides a chemical image of the sample under investigation, we determined by cluster analysis the distribution of carotenoids, anthocyanins and flavonols from the outer layer of the petals, and by integrating through suitable spectral regions selected as characteristic markers for particular pigments their relative concentration could approximately be determined. We found a satisfactory correlation between the patterns seen on the visible images and the patterns on the chemical images obtained by Raman mapping. Copyright © 2011 John Wiley & Sons, Ltd.     

Some forensic applications of a combined micro‐Raman and scanning electron microscopy system

The structural chemical analyser (SCA) is a novel accessory that allows the analytical advantages of Raman spectroscopy and scanning electron microscopy with energy dispersive x‐ray detection (SEM/EDX) to be realised in a single hybridised instrument. The combined Raman–SEM/EDX system permits in situ characterisation of a sample based on both its molecular and elemental makeup. This article demonstrates the potential of using the SCA for interrogating trace evidence for criminalistic purposes. Illustrative evidentiary examples (taken from our laboratory's archives) include the examination of a white paint fragment consisting of several layers of the same colour and a sample of explosive mixture recovered from a place of interest. The sensitive SEM imaging contrast mechanisms enabled the optically identical multiple layers of the white paint to be distinguished easily. The individual layers were then unambiguously analysed to establish their elemental profile (from energy dispersive x‐ray (EDX)) and this was cross‐referenced with the chemical information derived from in situ Raman measurements. X‐ray mapping was used as a fast and convenient way of characterising simultaneously multiple solids constituting the explosive mixture. Typical particles were targeted and analysed both by EDX and Raman spectroscopy revealing an unusual chlorate‐based energetic mixture that also contained 2, 4, 6‐trinitrotoluene (TNT) and 2, 4, 6‐trinitrophenylmethylnitramine (Tetryl). Copyright © 2009 John Wiley & Sons, Ltd.     

Fast mapping of inhomogeneities in the popular metallic perovskite Nb:SrTiO3 by confocal Raman microscopy

Confocal Raman microscopy was applied in order to investigate the homogeneity of donor doping in Nb:SrTiO₃ single crystals. Measurements of local Raman spectra revealed a systematic relation between the intensity of the Raman signal and the donor content of the crystals. We successfully elaborated a correspondence between the electronic structure and the intensity of the Raman lines using a crystal with macroscopic inhomogeneity as a demonstration sample. By mapping the distribution of the intensity of the Raman signal, we identified a characteristic inhomogeneous structure related to the presence of clusters with sizes of 5 µm to 20 µm, indicating inhomogeneous donor distribution caused by flaws introduced during crystal growth. Hence, we propose confocal Raman microscopy as a convenient technique for investigating the homogeneity and quality of doped perovskite surfaces, which are needed for various technological applications. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Passive signal enhancement in spatially offset Raman spectroscopy

We demonstrate experimentally, for the first time, the feasibility of enhancing signals in Spatially Offset Raman Spectroscopy (SORS) using a dielectric bandpass filter, building on our earlier experimental work on the enhancement of transmission Raman signals. The method is shown to lead to the enhancement of both the surface and subsurface Raman layer signal improving the signal‐to‐noise ratio of Raman spectra from the deep areas of samples, thus enhancing the technique's sensitivity and penetration depth. The filter is placed over the laser illumination zone, on the sample surface acting as a ‘unidirectional’ mirror transmitting the collimated laser beam on one side and reflecting photons escaping from the sample back into it. This enhances the degree of coupling of laser radiation into the medium and associated generated Raman signal. The feasibility study was performed on a two‐layer sample with the second layer located at the limit of the penetration depth of the method for this sample. The sample consisted of a 2.2‐mm over‐layer of a thinned paracetamol tablet followed by a 2‐mm layer of trans‐stilbene powder. The Raman signal was collected from a spatially offset region through a hole fabricated within the filter. The experiments demonstrate the presence of an enhancement of the Raman signal from both the layers by a factor of 4.4–4.5 and the improved signal‐to‐noise ratio of sublayer signal by a factor of 2.2, in agreement with photon shot noise dominated signal. Copyright © 2008 John Wiley & Sons, Ltd.     

A matter of scale: from far‐field microscopy to near‐field nanoscopy

Vibrational spectroscopy is a powerful analytical tool which provides chemical information about a sample without a priori knowledge. By combining vibrational spectroscopy with different microscopic techniques, scientists can visualize and characterize the chemical composition of a sample on length scales which cover many orders of magnitude; from far‐field radiation used in microwave astronomy and Fourier transform infrared microscopy, to near‐field scattering used in tip‐enhanced Raman spectroscopy and scanning near‐field optical or infrared microscopy. Here, various modern chemical mapping techniques are reviewed and their advantages and disadvantages are discussed. Also, a basic theoretical background is provided for each technique along with several illustrative examples.     

Subsurface analysis of painted sculptures and plasters using micrometre‐scale spatially offset Raman spectroscopy (micro‐SORS)

A recently developed variant of spatially offset Raman spectroscopy (SORS) for the non‐invasive analysis of thin painted layers, micro‐SORS, has been applied, for the first time, to real objects of Cultural Heritage – namely painted sculptures and plasters. Thin layers of paint originating from multiple restoration processes often applied over many centuries have been analysed non‐destructively using micro‐SORS to depths inaccessible to, or unresolvable into separate layers, by conventional confocal Raman microscopy. The concept has been demonstrated on several artistic artefacts of historical significance originating from Italy and dating from the medieval to the 18th century. The technique extends the depth applicability of Raman spectroscopy and with its inherently high chemical specificity that expands the portfolio of existing non‐destructive analytical tools in Cultural Heritage permitting to avoid cross‐sectional analysis often necessitated with this type of samples with conventional Raman microscopy. Currently, the method is non‐invasive only for artworks that can be placed under Raman microscope although there is a prospect for its use in a mobile system with largely removed restrictions on sample dimensions. © 2015 The Authors Journal of Raman Spectroscopy Published by John Wiley & Sons Ltd.     

A large‐solid‐angle X‐ray Raman scattering spectrometer at ID20 of the European Synchrotron Radiation Facility

An end‐station for X‐ray Raman scattering spectroscopy at beamline ID20 of the European Synchrotron Radiation Facility is described. This end‐station is dedicated to the study of shallow core electronic excitations using non‐resonant inelastic X‐ray scattering. The spectrometer has 72 spherically bent analyzer crystals arranged in six modular groups of 12 analyzer crystals each for a combined maximum flexibility and large solid angle of detection. Each of the six analyzer modules houses one pixelated area detector allowing for X‐ray Raman scattering based imaging and efficient separation of the desired signal from the sample and spurious scattering from the often used complicated sample environments. This new end‐station provides an unprecedented instrument for X‐ray Raman scattering, which is a spectroscopic tool of great interest for the study of low‐energy X‐ray absorption spectra in materials under in situ conditions, such as in operando batteries and fuel cells, in situ catalytic reactions, and extreme pressure and temperature conditions.     

Polarized Raman mapping study of the microheterogeneity in 0.67PbMg1/3 Nb2/3O3‐0.33PbTiO3 single crystal

Polarized micro‐Raman spectroscopy was carried out on the (001) face of a 0.67PbMg_1/3Nb_2/3O₃‐33%PbTiO₃ (PMN‐33%PT) single crystal. The Raman images revealed the spatial variations of the intensity of the Raman bands, suggesting that the structure in the PMN‐33%PT single crystal varied from one micro‐area to another. When changing the polarization direction of the incident light with respect to the selected crystalline axes, the intensities of the Raman modes varied periodically. According to the Raman selection rules (RSRs), the angular dependences of the Raman modes indicated that the PMN‐33%PT single crystal is in the monoclinic phase. Furthermore, the color patterns in the Raman images were associated with the coexistence of the M_A‐ and M_C‐type monoclinic phases in the PMN‐33%PT single crystal. Our results provide useful information for understanding the microheterogeneity of the relaxor PMN‐xPT single crystals with compositions near the morphotropic phase boundary region. Copyright © 2010 John Wiley & Sons, Ltd.     

Integration of correlative Raman microscopy in a dualbeam FIB SEM

We present an integrated confocal Raman microscope in a focused ion beam scanning electron microscope (FIB SEM). The integrated system enables correlative Raman and electron microscopic analysis combined with focused ion beam sample modification on the same sample location. This provides new opportunities, for example the combination of nanometer resolution with Raman advances the analysis of sub‐diffraction‐sized particles. Further direct Raman analysis of FIB engineered samples enables in situ investigation of sample changes. The Raman microscope is an add‐on module to the electron microscope. The optical objective is brought into the sample chamber, and the laser source, and spectrometer are placed in a module attached onto and outside the chamber. We demonstrate the integrated Raman FIB SEM function with several experiments. First, correlative Raman and electron microscopy is used for the investigation of (sub‐)micrometer‐sized crystals. Different crystals are identified with Raman, and in combination with SEM the spectral information is combined with structurally visible polymorphs and particle sizes. Analysis of sample changes made with the ion beam is performed on (1) structures milled in a silicon substrate and (2) after milling with the FIB on an organic polymer. Experiments demonstrate the new capabilities of an integrated correlative Raman–FIB–SEM. Copyright © 2016 John Wiley & Sons, Ltd.     

The Raman spectrum of the γ′‐V2O5 polymorph: a combined experimental and DFT study

Structure and vibrational dynamics of γ′‐V₂O₅ synthesized from a pristine γ‐LiV₂O₅ sample via a chemical oxidation route was studied by means of Raman spectroscopy and quantum‐chemical calculations. The calculations based on density functional theory reliably reproduce the experimental structure of the γ′‐V₂O₅ lattice. The calculated Raman spectrum agrees remarkably well with the experimental one. Making use of the agreement, a complete assignment of Raman bands to vibrations of particular structural units is proposed. The comparison of Raman spectra and structural features of α‐V₂O₅ and γ′‐V₂O₅ polymorphs allowed establishing reliable ‘structure–spectrum’ correlations and identifying Raman peaks characteristic for different structural units. Copyright © 2015 John Wiley & Sons, Ltd.     

Raman microspectroscopic evidence that dry‐fixing preserves the temporal pattern of non‐specific differentiation in live human embryonic stem cells

Raman microspectroscopy allows the classification of populations of human embryonic stem cells (hESCs) in different stages of differentiation based on the relative intensities of certain amino acid and nucleic acid bands. Here, we report the results of a comparative study of the Raman spectra of live cells versus cells killed and fixed by rapid desiccation, focusing on the ratio of intensities at 757 cm⁻¹ (tryptophan) and 784 cm⁻¹ (DNA and RNA). We observe that the same temporal pattern emerges over a 3‐week time course in both sample types. This suggests that prolonged observations of dry‐fixed cells can yield high signal‐to‐noise chemical images that cannot be obtained from colonies of living cells where the time scale of significant biological changes are comparable to the time scale of the measurement. This permits, for example, comparison of the spatial distributions of cells at different stages of differentiation within the same colonies. Copyright © 2010 John Wiley & Sons, Ltd.     

Direct characterization of phase behavior and compatibility in PET/HDPE polymer blends by confocal Raman mapping

Morphology, chemical distribution and domain size in poly(ethylene terephthalate)/high‐density poly(ethylene) (PET/HDPE) polymer blends of various ratios prepared with and without maleic anhydride have been analyzed with confocal Raman mapping and SEM. The ratioimage method introduced here allows us to obtain enhanced chemical images with higher contrast and reliability. Compatibility numbers (N_c) are calculated to evaluate the compatibility of the blends. The incompatible polymer blends show heterogeneous distribution with phase separation behavior, while the semicompatible blends prepared with maleic anhydride show much smaller subphase distributions with less distinct interphases. After the blending modification by maleic anhydride of only 0.5%, the viscosity status and dispersibility between PET and HDPE could be substantially improved, and the interactions that exist between the two phases have also been proved by ATR‐FT‐IR results. High‐spatial‐resolution confocal Raman mapping coupled with the ratioimage method provides a very attractive way to characterize the compatibility and phase behavior of the polymer blend through different blending methodologies. Copyright © 2006 John Wiley & Sons, Ltd.     

Photon migration of Raman signal in bone as measured with spatially offset Raman spectroscopy

Spatially offset Raman spectroscopy (SORS) is currently being developed as an in vivo tool for bone disease detection, but to date, information about the interrogated volume as influenced by the light propagation and scattering characteristics of the bone matrix is still limited. This paper seeks to develop our general understanding of the sampling depths of SORS in bone specimens as a function of the applied spatial offset. Equine metacarpal bone was selected as a suitable specimen of compact cortical bone large enough to allow several thin slices (600 µm) to be cut from the dorsal surface. Photon migration at 830‐nm excitation was studied with five bone slices and a 380‐µm‐thin polytetrafluoroethylene (PTFE) slice placed consecutively between the layers. To optimize Raman signal recovery of the PTFE with increasing depth within the bone stack required a corresponding increase in spatial offset. For example, to sample effectively at 2.2‐mm depth within the bone required an optimal SORS offset of 7 mm. However, with a 7‐mm offset, the maximum accessible penetration depth from which the PTFE signal could be still recovered was 3.7 mm. These results provide essential basic information for developing SORS technology for medical diagnostics in general and optimizing sampling through bone tissue, permitting a better understanding of the relationship between the offset and depth of bone assessed, in particular. Potential applications include the detection of chemically specific markers for changes in bone matrix chemistry localized within the tissue and not present in healthy bone. © 2015 The Authors. Journal of Raman Spectroscopy published by John Wiley & Sons, Ltd.     

Inhibition of urinary calculi—a spectroscopic study

Although herbal medicine is widely employed in inhibition of urinary calculi as an alternative and complementary curative method, the lack of detailed scientific studies that could provide insights into this complex process weakens its validity. The present work targets multitechnique spectroscopic investigations by Raman, infrared absorption, X‐ray photoelectron spectroscopy (XPS), and photoluminescence on the effects of the herb Rotula Aquatica Lour (RAL) on the growth of synthetically prepared magnesium‐based calculi. In addition to the standard magnesium phosphate‐based sample, two other samples were prepared with incorporation of 1 and 2wt% RAL herbal extract. Both, Raman and infrared data show a newberyite structure for the crystals without and with inhibitor. The XPS measurements reveal an unexpected presence of Zn in the sample with bfRAL inhibitor, which, as suggested in the literature, may initiate rapid stone formation, and consequently, contribute to the inhibition process. Furthermore, the existence of metallic Zn can explain the reflectance of the incident light observed in the infrared transmission studies of the unground crystals. A significant increase in magnesium with addition of herbal extract is observed in the XPS data. Also, evidence for Mg O binding between the inhibitor and the phosphate units of urinary calculus is found in XPS and Raman results. Similarity between our photoluminescence measurements and those of in vivo chlorophyll a corroborates to provide additional evidence of Mg‐related inhibition. Copyright © 2009 John Wiley & Sons, Ltd.     

Study of Raman spectrum of uranium using a surface‐enhanced Raman scattering technique

Raman spectroscopic investigation on weak scatterers such as metals is a challenging scientific problem. Technologically important actinide metals such as uranium and plutonium have not been investigated using Raman spectroscopy possibly due to poor signal intensities. We report the first Raman spectrum of uranium metal using a surface‐enhanced Raman scattering‐like geometry where a thin gold overlayer is deposited on uranium. Raman spectra are detected from the pits and scratches on the sample and not from the smooth polished surface. The 514.5‐ and 785‐nm laser excitations resulted in the Raman spectra of uranium metal whereas 325‐nm excitation did not give rise to such spectra. Temperature dependence of the B_3g mode at 126 cm⁻¹ is also investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

Depth‐resolved micro‐Raman spectroscopy of tri‐layer PFSA membrane for PEM fuel cells: how to obtain reliable inner water contents

Raman depth‐profiling microspectroscopy is currently emerging as a fast and non‐invasive method for the local content measurement of water diffusing across the perfluorosulfonic acid polymer used as electrolyte in low‐temperature fuel cells. However, water depth profiles obtained thereby are affected by the gradual degradation of the Raman signal as the exciting radiation is focused deeper into the sample and, thus, usually exhibit artificial gradients. The appropriate way to rectify raw data, in order to measure reliable inner water contents, is discussed in the case of perfluorosulfonic acid membranes soaked in water. The method is tested on a tri‐layer material composed by stacked ionomers with different chemical composition, ionic exchange capacity and swelling. Comparison of Raman spectra of the different ionomers, obtained under strictly the same hydration and optical conditions, allows critical discussion of previously reported band assignments. It is shown that Raman bands arising from the polymer backbone and from the side chain can be readily discriminated. Reliable water concentration profiles can then be obtained from the ratio between the Raman signal of sorbed water and of the polymer phase. Comparison with depth profiles obtained by using the pure water signal as internal reference shows that quantitative measurement requires the careful choice of the adequate Raman bands for representing the ionomer occupation of the volume probed by the exciting radiation. Different to what usually performed, the ionomer Raman signal to be integrated for compensating optical losses should include both bands arising from the polymer backbone and side chains. Last, obtaining accurate water concentration profiles also needs the knowledge of the so‐called optical factor β, i.e. the ratio between the scattering cross sections of ionomer chemical groups and sorbed water, which has to be measured by independent Raman experiments. Copyright © 2012 John Wiley & Sons, Ltd.     

Studies on paint cross sections of a glass painting by using FT‐IR and Raman microspectroscopy supported by univariate and hierarchical cluster analyses

Fourier transform infrared (FT‐IR) and Raman spectroscopy is used for the non‐destructive analysis of painting materials and ageing compounds in micrometric cross sections of a glass painting. The combination of both techniques in conjunction with imaging/mapping function provides the spatial distribution of chemical components identified in vibrational spectra. The aim of our work is to show the applicability of the FT‐Raman mapping technique in the detection of painting materials. We also compare Raman information gained by using two laser excitations at 532 and 1064 nm implemented in microspectrometers with different confocality and spatial resolution. In turn among FT‐IR imaging techniques, we compare chemical images recorded in external reflection and attenuated total reflection modes that give chemical images of different size and spatial resolution. Our FT‐IR and Raman imaging characterize a number of painting materials such as pigments, binders, fillers as well as degradation products. Raman maps are constructed by using the univariate analysis. In turn, a profile of IR images requires the use of a more complex methodology. Here, we compare FT‐IR images of the painting cross sections obtained by using the univariate and hierarchical cluster analysis. We clearly show that the multivariate approach is a powerful tool for the credible construction of IR images, providing the relevant chemical information on the multicomponent stratigraphy of the samples. Moreover, the combination of all the methods allows us to demonstrate their degree of utility for the study on the paint cross sections of the works of art. Copyright © 2013 John Wiley & Sons, Ltd.     

Drop‐coating deposition Raman spectroscopy of liposomes

Drop‐coating deposition Raman (DCDR) spectroscopy was tested as a potential technique for studying liposomes at very low sample concentrations. We used model liposomes prepared either from 1,2‐distearoyl‐sn‐glycero‐3‐phospocholine or from soybean asolectin, which is composed of various lipids and thus represents a good model of natural membranes. In both cases, deposited samples formed a dried drop with a circular shape with a ring of concentrated liposomes at the edge. Spectral mapping showed that maximum Raman intensity originated from the inner part of the edge ring, while Raman signal gradually decreased in both radial directions. The Raman spectra exhibited excellent reproducibility of spectral characteristics at different locations in the drop, indicating similar conformation and ordering of hydrocarbon lipid chains in the sample. Our results suggest that DCDR spectroscopy can be used for studying lipids in situ, and sensitivity of this technique is at least two orders of magnitude higher than that of conventional Raman microscopy. Copyright © 2011 John Wiley & Sons, Ltd.     

Experimental study of the Raman strain rosette based on the carbon nanotube strain sensor

This work presents a new technique named Raman strain rosette for the micro‐strain measurement of both Raman active and Raman inactive materials. The technique is based on the theoretical model of the carbon nanotube (CNT) strain sensor that applies the resonance and polarization Raman properties of CNTs and calculates the synthetic contributions of uniformly dispersed CNTs to the entire Raman spectrum. In our work, the proposed technique is applied in different experiments on the Raman inactive materials, such as step‐by‐step uniaxial tensile and Raman mapping around a circular hole. The experimental results reached by the Raman strain rosette are consistent with the actual values as a whole. This study verifies that the Raman strain rosette is applicable to quantitative measurement of all the in‐plane components of the strain tensor (including both normal and shear strains) by three polarized Raman detections for each sampling spot on a microscale. The technique is further applicable to achieving the strain fields through Raman mapping. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman and surface enhanced Raman scattering of a black dyed silk

The Raman and surface enhanced Raman scattering (SERS) spectra of a black dyed silk sample (BDS) were registered. The spectral analysis was performed on the basis of Raman and SERS spectral data of isolated samples of Bombyx mori silk fibroin, its motif peptide component (GAGAGS) and the synthetic reactive black 5 dye (RB5). The macro FT‐Raman spectrum of the silk sample is consistent with a silk II‐Cp crystalline fraction of Bombyx mori silk fibroin; the SERS spectrum is highly consistent with conformational modifications of the fibroin due to the interactions with the Ag nanoparticles. The GAGAGS peptide sequence dominates the Raman spectrum of the silk. The SERS spectrum of the peptide suggests a random coil conformation imposed by the surface interaction; the serine residue in the new conformation is exposed to the surface. Quantum chemical calculations for a model of the GAGAGS–Ag surface predict a nearly extended conformation at the Ag surface. The Raman spectrum of the dye was analysed, and a complete band assignment was proposed; it was not possible to propose a preferential orientation or organization of the molecule on the metal surface. Quantum chemical calculations for a model of the dye interacting with a silver surface predict a rather coplanar orientation of the RB5 on the Ag metal surface. The Raman spectrum of the BDS sample is dominated by signals from the dye; the general spectral behaviour indicates that the dye mainly interacts with the silk through the sulphone (–SO₂–) and sulphonate (–SO₂–O–) groups. Besides the presence of dye signals, mainly ascribed to the sulphone and sulphonate bands, the SERS spectrum of the BDS sample also displays bands belonging to the amino acids alanine, glycine, serine and particularly tyrosine. Copyright © 2013 John Wiley & Sons, Ltd.