Synthesis and Solution Structure of 1H‐Benzo‐1,5‐diazepine Derivatives with a Perfluoroalkyl Side Chain

The reaction of perfluorinated 3,5‐dioxoesters with 1,2‐diaminobenzenes or 2,3‐diaminonaphthalenes afforded two types of 1H‐benzo‐1,5‐diazepine derivatives containing a perfluorinated side chain. 2,5‐Dihydro‐1H‐benzo‐1,5‐diazepin‐2‐ones were formed by cyclocondensation via the central keto and the ester group, whereas 1H‐benzo‐1,5‐diazepines resulted from cyclocondensation via the two keto groups. The tautomerism and isomerization of these compounds have been investigated by ¹H‐, ¹³C‐, and ¹⁹F‐NMR spectroscopy. The 1,5‐diazepines appear in CDCl₃ solution as mixtures of two tautomeric forms, the enaminoimine I and diaminodiene II . In DMSO solution, besides I and II , two further species, III and IV , are formed by (E/Z) isomerization on the exocyclic C=C bond.     

Application of HSQC in the delineation of NMR signals of E and Z isomers of octadecyl p‐coumarates

Octadecyl p‐coumarates undergo E–Z isomerization in daylight. Although ¹H NMR, ¹³C NMR and ¹H–¹H COSY gave indications about this isomerization, the overlapping of some signals in the ¹H NMR of aromatic region prevented the delineation of signals of the individual isomers. However, heteronuclear spin quantum coupling correlation (HSQC) with the unique feature of two sets of nearby δ_C–δ_H correlations gave conclusive evidence for this isomerization and helped in the delineation of ¹H NMR and ¹³C NMR signals of E‐octadecyl p‐coumarate and Z‐octadecyl p‐coumarate. Copyright © 2012 John Wiley & Sons, Ltd.     

2D-NMR studies of a model for Krytox® fluoropolymers

Multiple two‐dimensional nuclear magnetic resonance (2D‐NMR) techniques have been used to study the structures of Krytox^® perfluoro(polyalkyl ether) and its mechanism of polymerization. Model compound K₄, containing four Krytox^® fluoropolymer repeat units, was analyzed to interpret the multiplet patterns in the NMR spectra from the polymer model. ¹⁹F {¹³C}‐Heteronuclear single‐quantum correlation experiments, performed with delays optimized for ¹J_CF and ²J_CF, provided spectra that permitted identification of resonances from individual monomer units. Selective, ¹⁹F‐¹⁹F COSY 2D‐NMR experiments were performed with different excitation regions; these experiments were combined with selective inversion pulses to remove ¹⁹F‐¹⁹F J couplings in the f₁ dimension. The resulting COSY spectra were greatly simplified compared with standard ¹⁹F‐¹⁹F COSY spectra, which are too complicated to interpret. They give information regarding the attachments of monomer units and also provide insights into the nature of the stereoisomers that might be present in the polymer. Both infrared and NMR spectra show peaks identifying chain end structures. With the help of these studies, resonances can be assigned, and the average number of repeat units in the polymer chain can be calculated based on the assignments obtained. Copyright © 2011 John Wiley & Sons, Ltd.     

Aggregation of Dinuclear Cations [{Au(PR3)}2(μ‐OH)]+ into Dimers Induced by Polyoxometalate (POM) Template Effects

Intercluster compounds, [{(Au{P(p‐XPh)₃})₂(μ‐OH)}₂][α‐SiMo₁₂O₄₀(Au{P(p‐XPh)₃})₂] · nEtOH [X = F ( 1 ), Cl ( 2 )] were synthesized by polyoxometalate (POM)‐mediated clusterization, and were unequivocally characterized by X‐ray crystallography, elemental analysis, thermogravimetric and differential thermal analysis (TG/DTA), Fourier transform infrared (FT‐IR), solid‐state cross‐polarization magic‐angle‐spinning (CPMAS) ³¹P nuclear magnetic resonance (NMR), and solution (¹H, ³¹P{¹H}) NMR spectroscopy. The “dimer‐of‐dinuclear phosphanegold(I) cation”, i.e., [{(Au{P(p‐XPh)₃})₂(μ‐OH)}₂]²⁺ was formed by the self‐assembly of dinuclear phosphanegold(I) cations, i.e., [(Au{P(p‐XPh)₃})₂(μ‐OH)]⁺, through inter‐cationic aurophilic interactions as the crossed‐edge arrangement (or tetrahedral Au₄ structure) for 1 , while as the parallel‐edge arrangement (or rectangular Au₄ structure) for 2 . The latter arrangement was first attained only by assistance of the POM. The POM anions in 1 and 2 contained two mononuclear phosphanegold(I) cations, i.e., [Au{P(p‐XPh)₃}]⁺, linked to the OMo₂ oxygen atoms of edge‐sharing MoO₆ octahedra. In the solution ³¹P{¹H} NMR of 1 and 2 , we observed single signals due to the rapid exchange of the phosphanegold(I) units. This shows that the OMo₂ oxygen atoms of edge‐sharing MoO₆ octahedra in the Keggin POM act as multi‐centered active binding sites for the formation of [{(Au{P(p‐XPh)₃})₂(μ‐OH)}₂]²⁺.     

The Synthesis,Spectral, and Electrochemical Characterization of Novel Alkoxybenzoquinone Derivatives

The novel monosubstituted benzoquinone compounds 3e , 3g , 3h ; 2,5‐O‐ substituted benzoquinone compounds 4a , 4b , 4c , 4d , 4e 4g and known compound 4h and 2,6‐O‐ substituted benzoquinone compounds 5e , 5f , 5g , 5h were obtained by the reaction of p‐chloranil ( 1 ) and related alcohol compounds in potassium carbonate (K₂CO₃) solution of acetonitrile or chloroform with Et₃N. The novel cyclic compounds 7 , 8 and 10 , 11 were obtained from the reaction of p‐chloranil ( 1 ) and diols in potassium carbonate (K₂CO₃) solution of acetonitrile at room temperature. The structures of novel compounds were characterized by using micro analysis, FT‐IR, ¹H‐NMR, ¹³C‐NMR, MS and cyclic voltammetry.     

Novel thermoresponsive fluorinated double‐hydrophilic poly{[N‐(2,2‐difluoroethyl)acrylamide]‐b‐[N‐(2‐fluoroethyl)acrylamide]} block copolymers

Novel thermoresponsive double‐hydrophilic fluorinated block copolymers were successfully synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization. Poly[N‐(2,2‐difluoroethyl)acrylamide] (P2F) was synthesized via RAFT polymerization of N‐(2,2‐difluoroethyl)acrylamide (M2F) using 2‐dodecylsulfanylthiocarbonylsulfanyl‐2‐methylpropionic acid (DMP) as the chain transfer agent (CTA) and 2,2′‐azobisisobutyronitrile (AIBN) as the initiator. The resulting P2F macroCTA was further chain extended with N‐(2‐fluoroethyl)acrylamide (M1F) to yield poly{[N‐(2,2‐difluoroethyl)acrylamide]‐b‐[N‐(2‐fluoroethyl)acrylamide]} (P2F‐b‐P1F) block copolymers with different lengths of the P1F block. Molecular weight and molecular weight distribution were determined by gel permeation chromatography. The average molecular weight (M_n) of the resulting polymers ranged from 2.9 × 10⁴ to 5.8 × 10⁴ depending on the length of the P1F block. The molecular weight distribution was low (M_w/M_n = 1.11–1.19). Turbidimetry by UV‐Visble (UV‐Vis) spectroscopy, dynamic light scattering, and in situ temperature‐dependent ¹H NMR measurements demonstrated that the P2F block underwent a thermal transition from hydrophilic to hydrophobic, which in turn induced self‐assembly from unimers to aggregates. Transmission electron microscopy studies demonstrated that polymeric aggregates formed from an aqueous solution of P2F‐b‐P1F at 60 °C were disrupted by cooling down to 20 °C and regenerated by heating to 60 °C. Temperature‐triggered release of a model hydrophobic drug, coumarin 102, was also demonstrated. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Biodegradable polymers based on renewable resources. VII. Novel random and alternating copolycarbonates from 1,4:3,6‐dianhydrohexitols and aliphatic diols

Novel copolycarbonates containing 1,4:3,6‐dianhydro‐D ‐glucitol or 1,4:3,6‐dianhydro‐D ‐mannitol units, with various methylene chain lengths, were synthesized by bulk and solution polycondensations, of several combinations of carbonate‐modified sugar derivatives and aliphatic diols. Bulk polycondensations of 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(phenoxycarbonyl)‐D ‐glucitol or 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(phenoxycarbonyl)‐D ‐mannitol with four α,ω‐alkanediols having methylene chain lengths of 4, 6, 8, and 10, respectively, at 180 °C afforded the corresponding copolycarbonates with number‐average molecular weight (M_n) values up to 19.₂ × 10³. ¹³C NMR analysis disclosed that these polymers had scrambled structures in which the sugar carbonate and aliphatic carbonate moieties were nearly randomly distributed along a polymer chain. However, solution polycondensations between 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(p‐nitrophenoxycarbonyl)‐D ‐glucitol or 1,4:3,6‐dianhydro‐2,5‐bis‐O‐(p‐nitrophenoxycarbonyl)‐D ‐mannitol, and the α,ω‐alkanediols in sulfolane or dimethyl sulfoxide at 60 °C gave well‐defined copolycarbonates having regular structures consisting of alternating sugar carbonate and aliphatic carbonate moieties with M_n values up to 33.₈ × 10³. Differential scanning calorimetry demonstrated that all the copolycarbonates were amorphous with glass‐transition temperatures ranging from 1 to 65 °C, which decreased with increasing lengths of the methylene chain of the aliphatic diols. Additionally, all the copolycarbonates were stable up to 310–330 °C as estimated by thermogravimetric analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2312–2321, 2003     

Synthesis,characterization, and photoresponsive behavior of new azobenzene‐containing polyethers

Two new polyethers, bearing azobenzene moiety in the side chain, were synthesized in excellent yields by means of anionic polymerization of 4‐glycidyloxyazobenzene and 4‐cyano‐4′‐glycidyloxyazobenzene (leading to azo‐P1 and azo‐P2 polymers, respectively) with the system polyiminophosphazene base t‐Bu‐P₄/3,5‐di‐tert‐butylphenol as initiator. The polymers were characterized with respect to their molecular weights, structure, and calorimetric features. The polyether bearing cyanoazobenzene group in the side chain was found to exhibit nematic phase up to 200 °C. E–Z isomerization of both polymers in tetrahydrofuran solution, after irradiating with UV light at 364 nm for 15 min, was investigated by means of UV–visible absorption spectroscopy. In the case of glycidylic monomers as well as the resulting polymers, E–Z isomerization was also investigated by means of ¹H NMR, by direct irradiation in the NMR probe in deuterated 1,1,2,2‐tetrachloroethane solution. By this technique, in the case of 4‐cyano‐4′‐glycidyloxyazobenzene, it was found that irradiation led to a photostationary state corresponding to an amount of Z isomer equal to 25%. For azo‐P1 polymer, Z–E or “reverse” isomerization was investigated at 60, 70, or 80 °C directly in the NMR probe; as expected, the process followed a first‐order rate law. The kinetic constants as well as the activation energy for the process were determined in this temperature range. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5426–5436, 2009     

Olefin isomerization reactions catalyzed by ruthenium hydrides bearing Schiff base ligands

A series of in situ‐generated ruthenium hydride complexes Ru(PPh₃)₂(CO)H(Lⁿ) (n = a – h ) incorporating a Schiff base ligand was investigated for the isomerization of olefins. ¹H‐NMR was used to characterize the new hydride species in combination with ³¹P‐NMR. Allylbenzene and 1‐octene were used as model substrates. Temperature, solvents and catalyst/substrate mole ratio were taken into account as parameters to optimize the isomerization reaction. All catalysts showed the best performance in 2‐butanol, suggesting that the catalytic activity depends not only strongly on the steric and electronic environment of the ruthenium but also on the chosen solvent. Copyright © 2011 John Wiley & Sons, Ltd.     

Photochemical isomerization of norbornadiene‐containing polytriazoles obtained by click chemistry polyaddition

Polyesters and polyethers containing norbornadiene (NBD) and 1,2,3‐triazole units in the main chain are prepared by step growth polymerization of diester or diether NBD‐based dialkynes with different aromatic diazides using copper‐catalyzed azide–alkyne cycloaddition. The solubility and the physical properties of the resulting polytriazoles are investigated by differential scanning calorimetry, thermogravimetric analysis, size exclusion chromatography, and ¹H NMR spectroscopy, and are discussed taking into account of the chemical structures of the monomers. All of them are amorphous with glass transition temperatures ranging from 51 to 117 °C, number average molecular weight (M_n) values from 16 to 43 kDa and thermal degradation (T_d10) values from 175 to 292 °C. The photochemical valence isomerization (PVI) of the NBD units into quadricyclanes (QC) is investigated using UV–vis spectroscopy of polymer films spin‐coated onto quartz substrates. For the first time the PVI of NBD into QC is demonstrated by ¹H NMR spectroscopy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 223–231     

Studies on Properties of p—Nitrophenylazo Calix[4]arene Derivatives

The p-nitrophenylazo calix[4] arene derivatives la-ld with nonlinear optical(NLO)properties were prepared by the diazo-coupling reaction of calix[4]arene with p-nitrophenyl diazonium.The diazotization reaction of p-nltroaniline was caried out with isoamyl nitrite as a source of nitrous acid in EtONa/EtOH under refluxing conditon.X-Ray crystallographic analysis and ^1H NMR sptectra reveal that they exist as cone conformation in crystal state or in soution.HRS measurements at 1064 nm in THF indicate that p-nitrophenylazo calix[4]arenes have higher hyperpolarizability βz values than the corresponding reference compound 4-(4-nitrophenylazo)-2,6-dimethyl-phenol,without red shift of the charge transfer band.The tetrakis p-nitropheylazo calix[4]arene(2)with longer alkyl chains can form monolayer aht the air/water interface.     

Piano‐stool Ru (II) arene complexes that contain ethylenediamine and application in alpha‐alkylation reaction of ketones with alcohols

A series of piano‐stool Ru (II) complexes ( Ru _1–7 ) bearing ethylenediamine with aryl and aliphatic groups were prepared and fully characterized by ¹H, ¹³C, ¹⁹F and ³¹P NMR spectroscopy, FT‐IR and elemental analysis. The crystal structures of Ru _2–4 and Ru ₇ were determined by X‐ray crystallography. They were successfully applied to the alpha(α)‐alkylation of aliphatic and aromatic ketones with alcohols via the borrowing hydrogen strategy in mild reaction conditions within a short time. The catalytic system has a broad substrate scope, which allows the synthesis of alpha alkylated ketones with excellent yields. The electronic and steric effects of complexes on catalytic activity were analysed. The influence of the carbon chain length of the ligand on the alpha‐alkylation reaction of ketones was also investigated. The catalytic cycle was also examined by ¹H‐NMR spectroscopy in d₈‐toluene.     

Click chemistry‐assisted triazole‐substituted azobenzene and fulgimide units in the pendant‐based copoly(decyloxymethacrylate)s for dual‐mode optical switches

Copolymer containing new thermally reversible click chemistry‐assisted triazole‐substituted azobenzene and fulgimide units in the pendant F‐co‐A was prepared by free‐radical solution addition polymerization technique. The F and A were also prepared for comparison. The DSC analysis of F indicates that the polymer possessing the C‐form of fulgimide unit exhibited higher T_m than that of E‐form of the same polymer and revealed that the C‐form of fulgimide unit in F is highly ordered. The cis‐trans back isomerization behavior of the click chemistry‐assisted triazole‐substituted azobenzene unit in film A has thermal irreversibility, while in F‐co‐A it exhibited thermal reversibility. The UV‐exposed film of F‐co‐A heated around T_g leads to cis‐trans back isomerization of azobenzene unit and thermally stable C‐form of fulgimide which retains its conjugated structure where both the photochromic units are converted into planar conformations and exhibit high fluorescence properties. The fluorescence maxima of C‐form in F‐co‐A red shifted compared with F , because the substituted triazole ring in the azobenzene unit stabilized the C‐form of fulgimide unit. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7843–7860, 2008     

The glucose‐responsive behavior of a block copolymer featuring boronic acid and glycine

Glucose responsive block copolymer featuring boronic acid as a glucose responsive moiety and glycine are reported. The first block is polymerized through reversible addition–fragmentation chain transfer (RAFT) polymerization and the resulting poly(N‐acryloylmorpholine)₁₁₃ (PAcM) is employed as a macro‐chain transfer agent for chain extension with pentafluorophenyl acrylate (PFPA) yielding a well‐defined PAcM₁₁₃‐block‐poly(pentafluorophenyl acrylate)₈₄ (PPFPA). The PPFPA block is then reacted with functional (3‐aminomethyl) phenyl boronic acid and glycine via post‐polymerization modification and the structure of the block copolymer is confirmed by proton nuclear magnetic resonance (NMR), ¹⁹F NMR, Fourier transform infrared, and gel permeation chromatography. By copolymerizing glycine into the polymer backbone, the relative pK_a of the block copolymer is significantly lowered. The block copolymer can self‐assemble into core–shell micelles in aqueous solution and disassemble in response to glucose at the physiological pH. Furthermore, the encapsulation and release of Nile red (NR) as a hydrophobic model drug is studied under the physiological pH. The influence of the glucose concentration on the NR release from the polymeric micelles is demonstrated. These results suggested that the glucose‐responsive poly[(AcM)₁₁₃‐b‐(3‐(aminomethyl)phenylboronic acid hydrochloride(‐co‐Gly)₈₄] block copolymer has potential applications as a glucose‐responsive polymer for insulin delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 422–431     

Isomerization of Keggin Al13 Ions Followed by Diffusion Rates

The solution chemistry of aluminum has long interested scientists due to its relevance to materials chemistry and geochemistry. The dynamic behavior of large aluminum–oxo‐hydroxo clusters, specifically [Al₁₃O₄(OH)₂₄(H₂O)₁₂]⁷⁺ ( Al₁₃ ), is the focus of this paper. ²⁷Al NMR, ¹H NMR, and ¹H DOSY techniques were used to follow the isomerization of the ?‐Al₁₃ in the presence of glycine and Ca²⁺ at 90 °C. Although the conversion of ?‐Al₁₃ to new clusters and/or Baker–Figgis–Keggin isomers has been studied previously, new ¹H NMR and ¹H DOSY analyses provided information about the role of glycine, the ligated intermediates, and the mechanism of isomerization. New ¹H NMR data suggest that glycine plays a critical role in the isomerization. Surprisingly, glycine does not bind to Al₃₀ clusters, which were previously proposed as an intermediate in the isomerization. Additionally, a highly symmetric tetrahedral signal (δ=72 ppm) appeared during the isomerization process, which evidence suggests corresponds to the long‐sought α‐Al₁₃ isomer in solution.     

Synthesis and Molecular Structure of [n‐Bu2(F)SnOSn(F)t‐Bu2]2 — an Unsymmetrically Substituted Tetraorganodistannoxane

The dimeric tetraorganodistannoxane [n‐Bu₂(F)SnOSn(F)t‐Bu₂]₂ ( 1 ) was prepared by the reaction of (t‐Bu₂SnO)₃ with n‐Bu₂SnF₂ and characterized in solution by multinuclear NMR spectroscopy and ESI MS spectrometry and in the solid state by ¹¹⁹Sn MAS NMR spectroscopy and single crystal X‐ray diffraction.     

Integrating 31P DOSY NMR Spectroscopy and Molecular Mechanics as a Powerful Tool for Unraveling the Chemical Structures of Polyoxomolybdate‐Based Amphiphilic Nanohybrids in Aqueous Solution

Novel organic–inorganic hybrids of various sizes were generated by reaction of 1,8‐octanediphosphonic acid (ODP) and (NH₄)₆Mo₇O₂₄ in aqueous solution. The formation of rodlike hybrids with variable numbers of covalently bound ODP and polyoxomolybdate (POM) units can be tuned as a function of increasing (NH₄)₆Mo₇O₂₄ concentration at fixed ODP concentration. The chemical structure of the ODP/POM hybrids was characterized by ¹H, ³¹P, and ⁹⁵Mo NMR spectroscopy. Heteronuclear ³¹P DOSY (diffusion‐ ordered NMR spectroscopy) and molecular mechanics (MM) calculations were applied to determine the size and shape of the nanosized hybrids generated at various ODP/POM ratios. For this purpose, the structures of ODP/POM hybrids with variable numbers of ODP and POM units were optimized by MM and then approximated as cylinder‐shaped objects by using a recently described mathematical algorithm. The thus‐obtained cylinder length and diameter were further used to calculate the expected diffusion coefficients of the ODP/POM hybrids. Comparison of the calculated and experimentally determined diffusion coefficients led to the most probable ODP/POM hybrid length for each sample composition. The ³¹P DOSY results show that the length of the hybrids increases with increasing POM concentration and reaches a maximum corresponding to an average of 8 ODP/7 POM units per chain at a sample composition of 20 mM ODP and 14 mM POM. With excess POM, above the latter concentration, the formation of shorter‐chain hybrids terminated by Mo₇ clusters at one or both ends was evidenced on further increasing the POM concentration. The results demonstrate that the combination of ³¹P DOSY and MM, although virtually unexplored in POM chemistry, is a powerful innovative strategy for the detailed characterization of nanosized organic–inorganic POM‐based hybrids in solution.     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Sequence analysis of glycolide and p‐dioxanone copolymers

Low and medium molecular weight copolymers constituted by glycolide and p‐dioxanone units have been synthesized by a ring‐opening polymerization. The p‐dioxanone monomer was obtained from (2‐hydroxyethoxy)acetate or by thermal depolymerization of poly(p‐dioxanone). ¹H and ¹³C NMR spectra were highly sensitive to the chemical sequences, which were effectively assigned by considering the data from samples with different compositions, and the acquisition of heteronuclear ¹H and ¹³C NMR‐correlated spectra. End groups were also identified, allowing methylene protons of sequences involving up to two glycolide units to be distinguished. These data seem basic to analyze degradation products or the influence of thermal treatments in chain microstructure. Glycolide/p‐dioxanone copolymers are an interesting system because changes on chemical sequences can easily occur due to a depolymerization reaction that eliminates p‐dioxanone residues. Furthermore, depending on the polymerization conditions, the occurrence of transesterification reactions may be highly significant. These reactions have a great impact in properties such as the melting temperature and can be easily quantified by NMR spectroscopy because of the occurrence of a new chemical sequence. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Origin of the color of π‐conjugated columnar polymers: Poly(p‐n‐octylthiophenyl)acetylene prepared using a [Rh(norbornadiene)Cl]2 catalyst

Highly stereospecific polymerization of a novel sulfur containing aromatic acetylenes, that is, (p‐n‐octylthiophenyl)acetylene (pOctSPA), was successfully performed using the Rh complex, [Rh(norbornadiene)Cl]₂‐TEA, catalyst in the presence of various solvents under mild conditions. The resulting polymers were characterized in detail by ¹H NMR, ESR, laser Raman, diffuse reflective UV‐Vis (DRUV‐Vis), and wide angle X‐ray diffraction methods. The data showed that the resulting polymers bear cis‐transoid form, which can induce the cis‐to‐trans isomerization when the cis polymers are subjected to pressure at room temperature under vacuum, breaking rotationally the cis C?C bonds in the main‐chain giving two kinds of π‐radicals, the so‐called cis radical and trans radical as the origin of a polymer magnet like a novel spin glass material. Further, the resulting cis poly(acetylene)s were found to have a helical main‐chain, which is packed in pseudohexagonal crystal called π‐conjugated columnar or nano π‐conjugated columnar as a novel color controllable material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2836–2850, 2005