Hybrid cylindrical micelles loaded with nanoparticles are fabricated via extrusion of spherical micelles in solution phase through small long cylindrical pores. Small gold nanoparticles (AuNPs) are pre‐coated with thiol‐terminated polystyrene and then further encapsulated in the core part of block copolymer spherical micelles by a precipitation method. By varying the starting mass ratio of AuNPs and the diblock copolymers polystyrene‐b‐polyisoprene (PS‐b‐PI) during the encapsulation, the AuNPs loading density along the cylindrical micelles can be controlled. The mechanism for this sphere‐to‐cylinder transition induced by extruding hybrid spherical micelles through small cylindrical nanopores is discussed. These findings provide a novel way to manufacture high‐quality and functional polymeric nanowires, which may open the door to new applications such as in plasmonic waveguides.
Nanoporous thin films with pore size of sub‐10 nm are fabricated using an acid‐cleavable block copolymer (BCP), a benzoic imine junction between poly(ethylene oxide) (PEO) and poly(methacrylate) (PMAAz) bearing an azobenzene side chain (denoted as PEO‐bei‐PMAAz) as the precursor. After a thermal annealing, the block copolymers are self‐assembled to form highly ordered PEO cylinders within a PMAAz matrix normal to the film, even in the case of low BCP molecular weight due to the existing of the liquid crystalline (LC) azobenzene rigid segment. Thus, PMAAz thin films with pore size of ≈7 nm and density of ≈1012 cm−2 are obtained after removal of the PEO minor phase by breaking the benzoic imine junction under mild acidic conditions. This work enriches the nanoporous polymer films from BCP precursors and introduces the LC property as a functionality which can further enhance the mechanical properties of the films and broaden their applications.
A surface plasmon resonance (SPR) expression after hybridization of chitosan–gold nanoparticle‐antibody ( CS ‐ AuNPs‐Ab ) based on: i) metal‐free click chemistry, and, ii) in water system as an approach for a rapid antigen sensing, is proposed. The chitosan‐hydroxybenzyl triazole complex enables us to carry out the conjugation of mPEG and trifluoromethylated oxanorbornadiene ( OND ) in water. CS‐mPEG‐OND further allows metal‐free click to hybridize chitosan ( CS ) with azido‐modified gold nanoparticles ( azido‐AuNPs ) in aqueous solution at room temperature. The CS‐mPEG‐OND conjugated with LipL32 antibody ( Ab ) not only effectively binds with LipL32 antigen ( Ag ) but also performs the cycloaddition with azido‐AuNPs to display a change in color within 2 min. The phenomenon leads to a simple and efficient naked‐eye antigen detection technique.
For the first time, the successful Gilch synthesis of poly(ortho‐phenylene vinylenes) (ortho‐PPVs) is reported. The molar mass of the constitutionally homogeneous ortho‐PPVs reaches values as high as Mw ≈ 300 000 Da. The ortho‐connectivity of the repeating units forces the chains to assume closely packed conformations even in good solvents. Significant perturbation of the π–electron systems and considerable shortening of the conjugation lengths are the consequences. UV–vis absorption and photoluminescence maxima consequently are shifted clearly toward shorter wavelengths compared to, e.g., classic para‐PPVs.
Gold nanoparticles (AuNP) with pyridyl end‐capped polystyrenes (PS‐4VP) as “quasi‐monodentate” ligands self‐assemble into ordered PS‐4VP/AuNP nanostructures with 3D hexagonal spatial order in the dried solid state. The key for the formation of these ordered structures is the modulation of the ratio AuNP versus ligands, which proves the importance of ligand design and quantity for the preparation of novel ordered polymer/metal nanoparticle conjugates. Although the assemblies of PS‐4VP/AuNP in dispersion lack in high dimensional order, strong plasmonic interactions are observed due to close contact of AuNP. Applying temperature as an external stimulus allows the reversible distortion of plasmonic interactions within the AuNP nanocomposite structures, which can be observed directly by naked eye. The modulation of the macroscopic optical properties accompanied by this structural distortion of plasmonic interaction opens up very interesting sensoric applications.
Continuous conductive gold nanofibers are prepared via the “tubes by fiber templates” process. First, poly(l‐lactide) (PLLA)‐stabilized gold nanoparticles (AuNP) with over 60 wt% gold are synthesized and characterized, including gel permeation chromatography coupled with a diode array detector. Subsequent electrospinning of these AuNP with template PLLA results in composite nanofibers featuring a high gold content of 57 wt%. Highly homogeneous gold nanowires are obtained after chemical vapor deposition of 345 nm of poly(p‐xylylene) (PPX) onto the composite fibers followed by pyrolysis of the polymers at 1050 °C. The corresponding heat‐induced transition from continuous gold‐loaded polymer tubes to smooth gold nanofibers is studied by transmission electron microscopy and helium ion microscopy using both secondary electrons and Rutherford backscattered ions.
Star copolymers are known to phase separate on the nanoscale, providing useful self‐assembled morphologies. In this study, the authors investigate synthesis and assembly behavior of miktoarm star (μ‐star) copolymers. The authors employ a new strategy for the synthesis of unprecedented μ‐star copolymers presenting poly(N‐octyl benzamide) (PBA) and poly(ε‐caprolactone) (PCL) arms: a combination of chain‐growth condensation polymerization, styrenics‐assisted atom transfer radical coupling, and ring‐opening polymerization. Gel permeation chromatography, mass‐analyzed laser desorption/ionization mass spectrometry, and 1H NMR spectroscopy reveal the successful synthesis of a well‐defined (PBA11)2‐(PCL15)4 μ‐star copolymer (M n,NMR ≈ 12 620; Đ = 1.22). Preliminary examination of the PBA2PCL4 μ‐star copolymer reveals assembled nanofibers having a uniform diameter of ≈20 nm.
This work deals with the in‐depth investigation of thiol‐yne based network formation and its effect on thermomechanical properties and impact strength. The results show that the bifunctional alkyne monomer di(but‐1‐yne‐4‐yl)carbonate ( DBC ) provides significantly lower cytotoxicity than the comparable acrylate, 1,4‐butanediol diacrylate ( BDA ). Real‐time near infrared photorheology measurements reveal that gel formation is shifted to higher conversions for DBC /thiol resins leading to lower shrinkage stress and higher overall monomer conversion than BDA . Glass transition temperature (Tg), shrinkage stress, as well as network density determined by double quantum solid state NMR, increase proportionally with the thiol functionality. Most importantly, highly cross‐linked DBC /dipentaerythritol hexa(3‐mercaptopropionate) networks (Tg ≈ 61 °C) provide a 5.3 times higher impact strength than BDA , which is explained by the unique network homogeneity of thiol‐yne photopolymers.
The hierarchical self‐assembly of an amphiphilic block copolymer, poly(N,N‐dimethylacrylamide)‐block‐polystyrene with a very short hydrophilic block (PDMA10‐b‐PS62), in large granular nanoparticles is reported. While these nanoparticles are stable in water, their disaggregation can be induced either mechanically (i.e., by applying a force via the tip of the cantilever of an atomic force microscope (AFM)) or by partial hydrolysis of the acrylamide groups. AFM force spectroscopy images show the rupture of the particle as a combination of collapse and flow, while scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of partly hydrolyzed nanoparticles provide a clear picture of the granular structure.
A unique method of fabricating PS/AuNPs composite particles in ex situ mode is proposed on the basis of thermodynamically driving mechanism. It is facile and versatile as it eliminates the need for surface functionalizations and modifications of both PS microspheres and AuNPs. The PS/AuNPs composite particles take on a raspberry‐like morphology with controllable coverage according to some thermodynamic factors, which have been extensively characterized by scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. More importantly, the PS/AuNPs composite particles hold higher catalytic efficiency and better repeatability than the previously reported results, which are confirmed in two oxidation–reduction reactions of 2‐nitroaniline/NaBH4 and rhodamine B/NaBH4.
In this research, the synthesis of boron‐ketoiminate‐containing polymers is reported with large molecular weights ( = 20 000) and their optical properties are examined by UV–vis absorption and photoluminescence spectrometries. It is shown that the polymers exhibit strong emission both in the solution and solid states (ΦPL,THF = 0.46–0.80, ΦPL,film = 0.13–0.38). These optical properties can be explained by a donor–acceptor interaction between the boron ketoiminate and the electron‐donating comonomer such as fluorene or bithiophene. Furthermore, in the solid states, their emission colors can be successfully tuned from blue to orange by the substituents on the nitrogen atom with the difference of the steric hindrance (λPL,THF = 464–546 nm, λPL,film = 486–604 nm).
The coordination polymerization of silyl‐protected ω‐alkenols such as ω‐alken‐α‐oxytriisopropylsilanes 1 provides poly(ω‐alkenyl‐α‐oxytriisopropylsilalne)s with a highly isospecific microstructure ([mmmm] > 95%) when a combination of [OSSO]‐type bis(phenolato) dichloro zirconium(IV) complex 2 and dried methylaluminoxane is used as the precatalyst and activator, respectively. The resulting siloxy‐substituted polymers could be efficiently transformed into the corresponding functionalized polyolefins, which contained up to 90% acetyl groups and ≈7% hydroxy groups in the terminal side chains.
The polymerization of ocimene has been first achieved by half‐sandwich rare‐earth metal dialkyl complexes in combination with activator and AliBu3. The regio‐ and stereoselectivity in the ocimene polymerization can be controlled by tuning the cyclopentadienyl ligand and the central metal of the complex. The chiral cyclopentadienyl‐ligated Sc complex 1 prepares syndiotactic cis‐1,4‐polyocimene (cis‐1,4‐selectivity up to 100%, rrrr = 100%), while the corresponding Lu, Y, and Dy complexes 2 – 4 and the achiral pentamethylcyclopentadienyl Sc, Lu, and Y complexes 5 – 7 afford isotactic trans‐1,2‐polyocimenes (trans‐1,2‐selectivity up to 100%, mm = 100%).
The synthesis of two 4,7,12,15‐tetrakisalkoxy‐substituted [2.2.2]‐paracyclophane‐1,9,17‐trienes and their polymerization employing ring opening metathesis polymerization (ROMP) using Ru‐carbenes (third‐generation Grubbs catalyst) is reported. Phenylene ethynylene trimers are reduced via a Grignard reagent, followed by an intramolecular McMurry cyclization to give the cyclophenes. The cyclophenes are polymerized into soluble poly(para‐phenylene vinylene)s (PPV), which are analyzed in solution by NMR, UV–vis, and fluorescence spectroscopy. They are spin coated into amorphous, fluorescent thin films, and investigated by optical spectroscopy and cyclic voltammetry.
Special characteristics of wrinkles such as a scattering source and a high surface area are finding use in high‐tech applications. UV‐crosslinkable prepolymers are occasionally used for fabricating wrinkled films. Wavelength of the wrinkles formed from the prepolymers is several tens and hundreds of micrometers. Here, a UV‐crosslinkable liquid prepolymer is synthesized to spontaneously form wrinkle structures in the order of several micrometers. Double layers with a very thin hard skin and a soft and contractible foundation are formed at the same time, by ensuring that all the absorbance wavelengths of the photoinitiator are shorter than the minimum wavelength at which the prepolymer is transparent. The rate of photo‐crosslinking reaction, Rp, is also found to affect the thickness of the skin and foundation layers at the early UV‐curing stage. The first‐order apparent rate constant, kapp, is between ≈0.20 and ≈0.69 s−1 for the wrinkle formation. This wrinkle structures can be simply modulated by changing Rp.
An alkyne‐functionalized ruthenium(II) bis‐terpyridine complex is directly copolymerized with phenylacetylene by alkyne polymerization. The polymer is characterized by size‐exclusion chromatography (SEC), 1H NMR spectroscopy, cyclic voltammetry (CV) measurements, and thermal analysis. The photophysical properties of the polymer are studied by UV–vis absorption spectroscopy. In addition, spectro‐electrochemical measurements are carried out. Time‐resolved luminescence lifetime decay curves show an enhanced lifetime of the metal complex attached to the conjugated polymer backbone compared with the Ru(tpy)22+ model complex.
For a singlet–triplet coupled molecular system, the efficiency of forward and reverse intersystem crossing processes can be enhanced by reducing the energy gap between the singlet and triplet excited states (ΔEST), thus prolonging the exciton lifetimes. This has been proven beneficial for many emerging applications such as molecular luminescence, optoelectronics, and photonics. Here, a strategy is proposed to create small ΔEST by polymerizing fluorescent dye molecules, the efficacy of which is justified by density functional theory calculations and ultrafast spectroscopy. Thus, singlet–triplet exciton communication through polymerization‐enhanced intersystem crossing is also proposed.
A commercially available palladium N‐heterocyclic carbene (Pd‐NHC) precatalyst is used to initiate chain‐growth polymerization of 2‐bromo‐3‐hexyl‐5‐trimethylstannylthiophene. The molecular weight of the resultant poly(3‐hexylthiophene) can be modulated (7 to 73 kDa, Đ = 1.14 to 1.53) by varying the catalyst concentration. Mass spectrometry data confirm control over the polymer end groups and 1H NMR spectroscopy reveals that the palladium catalyst is capable of “ring‐walking”. A linear relationship between Mn and monomer conversion is observed. Atomic force microscopy and X‐ray scattering verify the regioregular nature of the resultant polythiophene.
A simple process is developed to fabricate metallo‐supramolecular nanogels (MSNs) by the metallo‐supramolecular‐coordinated interaction between histidine and iron‐meso‐tetraphenylporphin. MSNs are composed of histidine‐modified dextran (DH) and iron‐meso‐tetraphenylporphin (Fe–Por) and exhibit excellent biocompatibility and stability. MSNs show pH responsiveness in the intracellular mildly acidic environment, which has great potential for acid‐triggered drug release delivery. In vitro drug release profiles demonstrate that the pH‐dependent disassembly of MSNs to histidine and Por results in a quicker release rate of loaded‐DOX at pH 5.3, while at pH 7.4 MSNs could hinder the release of loaded‐DOX due to the enhanced stability of MSNs.
Furfuryl glycidyl ether (FGE) represents a highly versatile monomer for the preparation of reversibly cross‐linkable nanostructured materials via Diels–Alder reactions. Here, the use of FGE for the mid‐chain functionalization of a P2VP‐b‐PEO diblock copolymer is reported. The material features one furan moiety at the block junction, P2VP68‐FGE‐b‐PEO390, which can be subsequently addressed in Diels–Alder reactions using maleimide‐functionalized counterparts. The presence of the FGE moiety enables the introduction of dyes as model labels or the formation of hetero‐grafted brushes as shell on hybrid Au@Polymer nanoparticles. This renders P2VP68‐FGE‐b‐PEO390, a powerful tool for selective functionalization reactions, including the modification of surfaces.
