MgB2 fabrication by diffusion-controlled three layered (B-Mg-B) technique

MgB₂ was successfully fabricated through diffusion-controlled three-layered (B-Mg-B) technique under high pressure. Due to melting temperature of Mg, the material was pre-heat treated at 600 °C between 1 and 48 h. Optimum pre-heat treatment condition was found to be 600 °C for 48 h. Then, the compacted material was grinded and pelletized under pressure of 2 ton. The pellets were heat treated at 600-900 °C for 1-48 h. Optimum heat treatment condition was determined to be 800 °C for 1 h for formation of almost pure MgB₂. Diffusion coefficient was determined with Fick's law and EDX data. Diffusion coefficient value for B in Mg matrix and Mg in B matrix was determined to be 1.66×10⁻⁷ and 3.14×10⁻⁸ cm²/sn, respectively. Best T_c value (39.4 K) was obtained for material heat treated at 800 °C for 1 h. A symmetric hysteresis was obtained for the best MgB₂ material and magnetization decreased with increase in the temperature and the applied magnetic field.     

Nitric acid oxidation method to form SiO2/3C-SiC structure at 120 °C

3C-SiC(0 0 1) surfaces are considerably rough with the roughness root mean square value (R_ms) of 1.3 nm, but the surfaces become considerably smooth (i.e., R_ms of 0.5 nm) by heat treatment in pure hydrogen at 400 °C. Two-step nitric acid (HNO₃) oxidation (i.e., immersion in ∼40 wt% HNO₃ followed by that in 68 wt% HNO₃) performed after the hydrogen treatment can oxidize 3C-SiC at extremely low temperature of ∼120 °C, forming thick SiO₂ (e.g., 21 nm) layers. With no hydrogen treatment, the leakage current density of the 〈Al/SiO₂/3C-SiC〉 metal-oxide-semiconductor (MOS) diodes is high, while that for the MOS diodes with the hydrogen treatment is considerably low (e.g., ∼10⁻⁶ A/cm² at the forward gate bias of 1 V) due to the formation of uniform thickness SiO₂ layers. The MOS diodes with the hydrogen treatment show capacitance-voltage curves with accumulation, depletion, and deep-depletion characteristics.     

A novel polyol method to synthesize colloidal silver nanoparticles by ultrasonic irradiation

A polyol synthesis of silver nanoparticles in the presence of ultrasonic irradiation was compared with other configurations (at ambient temperature, 120 °C, and 120 °C with injected solutions) in the absence of ultrasonic irradiation in order to obtain systematic results for morphology and size distribution. For applying ultrasonic irradiation, rather fine and uniform spherical silver particles (21 ± 3.7 nm) were obtained in a simple (at ambient temperature without mechanical stirring) and fast (within 4 min, 3.61 × 10⁻³ mol min⁻¹) manner than other cases (at ambient temperature (for 8 h, 0.03 × 10⁻³ mol min⁻¹): 86 ± 16.8 nm, 120 °C (for 12 min, 1.16 × 10⁻³ mol min⁻¹): 64 ± 14.9 nm, and 120 °C with injected solutions (during 12 min): 35 ± 6.8 nm; all other cases contained anisotropic shaped particles). Even though the temperature of polyol reaction reached only at 80 °C (<120 °C) in the presence of ultrasonic irradiation, a uniform mixing (i.e. enhanced collision between silver particle and surrounding components) by ultrasonic irradiation might induce a better formation kinetics and morphological uniformity.     

Removal of chloridazon by natural and ammonium kerolite samples

The adsorption of chloridazon (5-amino-4-chloro-2-phenylpyridazin-3(2H)-one) on natural and ammonium kerolite samples from aqueous solution at 10, 25 and 40 °C has been studied by using batch experiments. The experimental data points were fitted to the Langmuir equation in order to calculate the adsorption capacities (X_m) of the samples; two straight lines were obtained, which indicates that the adsorption process takes place in two different stages. Values for X_m1 (first stage) ranged from 1.1 × 10⁻² mol kg⁻¹ for natural kerolite at 40 °C up to 5.1 × 10⁻² mol kg⁻¹ for ammonium kerolite at 10 °C and the values for X_m2 (second stage) ranged from 9.1 × 10⁻² mol kg⁻¹ for natural kerolite at 40 °C up to 14 × 10⁻² mol kg⁻¹ for natural kerolite at 10 °C. The adsorption experiments showed on the one hand, that the ammonium kerolite is more effective than natural kerolite to adsorb chloridazon in the range of temperature studied and on the other hand, that the lower temperature, the more effective the adsorption of chloridazon on the adsorbents studied.     

The electrodeposition behaviors and magnetic properties of Ni-Co films

Ni-Co films with different compositions and microstructures were produced on ITO glasses by electrodeposition from sulphate bath at 25 °C. Cyclic voltammograms give a result that the increase in the Co²⁺ concentration displaces Ni-Co alloy oxidation peaks to negative potential with high Co current distributions. It is observed that the content of cobalt in the films increases from 22.42% to 56.09% as the molar ratio of CoSO₄/NiSO₄ varying from 0.015/0.085 to 0.045/0.055 in electrolyte. XRD patterns reveal that the structure of the films strongly depends on the Co content in the deposited films. The saturation magnetization (M_s) moves up from 144.84 kA m⁻¹ to 342.35 kA m⁻¹ and coercivity (H_c) falls from 15.27 kA m⁻¹ to 7.27 kA m⁻¹ with the heat treatment temperature increasing from 25 °C to 450 °C. The saturation magnetization (M_s) and coercivity (H_c) move up from 340.97 kA m⁻¹ and 7.98 kA m⁻¹ to 971.58 kA m⁻¹ and 18.62 kA m⁻¹ with the Co content increasing from 22.42% to 56.09% after annealing at 450.     

Electric impedance study of elastic alternating propylene-carbon monoxide copolymer (PCO-200)

The electrical properties of elastic alternating propylene-carbon monoxide copolymer (PCO-200) were investigated using the impedance spectroscopy technique. The results revealed a phase transition at about 70 °C where the material transforms from its insulating phase of conductivity in the order of 6×10⁻⁹ to about 9×10⁻⁵ (Ω m)⁻¹, The second phase is characterized by temperature dependent electrical relaxation phenomena. The plot of the complex electric modulus and the complex impedance yields semicircles in the temperature range 70 up to 110 °C and a decreasing radius with increasing temperature. The activation energy was found to be in the order of 0.8 eV.     

Investigation of the effect of power ultrasound on the nucleation of water during freezing of agar gel samples in tubing vials

Nucleation, as an important stage of freezing process, can be induced by the irradiation of power ultrasound. In this study, the effect of irradiation temperature (−2 °C, −3 °C, −4 °C and −5 °C), irradiation duration (0 s, 1 s, 3 s, 5 s, 10 s or 15 s) and ultrasound intensity (0.07 W cm⁻², 0.14 W cm⁻², 0.25 W cm⁻², 0.35 W cm⁻² and 0.42 W cm⁻²) on the dynamic nucleation of ice in agar gel samples was studied. The samples were frozen in an ethylene glycol-water mixture (−20 °C) in an ultrasonic bath system after putting them into tubing vials. Results indicated that ultrasound irradiation is able to initiate nucleation at different supercooled temperatures (from −5 °C to −2 °C) in agar gel if optimum intensity and duration of ultrasound were chosen. Evaluation of the effect of 0.25 W cm⁻² ultrasound intensity and different durations of ultrasound application on agar gels showed that 1 s was not long enough to induce nucleation, 3 s induced the nucleation repeatedly but longer irradiation durations resulted in the generation of heat and therefore nucleation was postponed. Investigation of the effect of ultrasound intensity revealed that higher intensities of ultrasound were effective when a shorter period of irradiation was used, while lower intensities only resulted in nucleation when a longer irradiation time was applied. In addition to this, higher intensities were not effective at longer irradiation times due to the heat generated in the samples by the heating effect of ultrasound. In conclusion, the use of ultrasound as a means to control the crystallization process offers promising application in freezing of solid foods, however, optimum conditions should be selected.     

Preparation of activated carbons from cherry stones by activation with potassium hydroxide

Using cherry stones, the preparation of activated carbon has been undertaken in the present study by chemical activation with potassium hydroxide. A series of KOH-activated products was prepared by varying the carbonisation temperature in the 400-900 °C range. Such products were characterised texturally by gas adsorption (N₂, −196 °C), mercury porosimetry, and helium and mercury density measurements. FT-IR spectroscopy was also applied. The carbons prepared as a rule are microporous and macroporous solids. The degree of development of surface area and porosity increases with increasing carbonisation temperature. For the carbon heated at 900 °C the specific surface area (BET) is 1624 m² g⁻¹, the micropore volume is 0.67 cm³ g⁻¹, the mesopore volume is 0.28 cm³ g⁻¹, and the macropore volume is 1.84 cm³ g⁻¹.     

Variable-temperature FT-IR studies on the thermodynamics of carbon dioxide adsorption on a faujasite-type H-Y zeolite

Adsorption of carbon dioxide on a faujasite-type H-Y zeolite (Si:Al = 2.6:1) was studied by variable-temperature (200-290 K range) infrared spectroscopy. Adsorbed CO₂ molecules interact with the Brønsted acid Si(OH)Al groups located inside the zeolite supercage, bringing about a characteristic bathochromic shift of the O-H stretching mode from 3645 cm⁻¹ (free OH group) to 3540 cm⁻¹ (hydrogen-bonded CO₂ adsorption complex). Simultaneously, the asymmetric (ν₃) mode of adsorbed CO₂ is observed at 2353 cm⁻¹. From the observed variation of the integrated intensity of the 3645 and 2353 cm⁻¹ IR absorption bands upon changing temperature, corresponding values of standard adsorption enthalpy and entropy were found to be ΔH° = −28.5(±1) kJ mol⁻¹ and ΔS° = −129(±10) J mol⁻¹ K⁻¹. Comparison with the reported values of ΔH° for CO₂ adsorption on other zeolites is briefly discussed.     

In-fiber Mach–Zehnder interferometer based on multi-mode fiber and up-taper for curvature sensing

A new type of curvature sensor comprises a stub of multi-mode fiber and an up-taper is proposed and demonstrated experimentally. The whole fabrication process is quite simple and the sensor head is cost effective. Measurement results show that it has a maximum curvature sensitivity of −61.877 nm/m⁻¹ at 1.1718 m⁻¹ (the highest value of reported papers among in-fiber Mach–Zehnder interferometers) and −9.2115 nm/m⁻¹ from 0.865 m⁻¹ to 1.1172 m⁻¹. Temperature sensitivity of 89.01 pm/°C within the range of 20–80 °C has also been achieved, which implies the possibility for measurement of temperature.     

Adsorption and solid phase extraction of 8-hydroxyquinoline from aqueous solutions by using natural bentonite

The nitrogen-heterocyclic compound 8-hydroxyquinoline (8HQ) is one of the components of coal tar and has a wide variety of uses in industry. Because of its toxicity for aquatic organisms and harmful effects for human health, the removal of 8HQ from aqueous solutions by adsorption onto natural bentonite was investigated in the present work. The experimental results show that the optimum pH value of 2.5 is favourable for the 8HQ adsorption. The experimental data were fitted well with the pseudo-second-order kinetic and Langmuir adsorption isotherm models at all studied temperatures. The maximum adsorption capacity obtained from the Langmuir isotherm model at 20 °C was 120.6 mg g⁻¹. The calculated thermodynamic results such as ΔG° (−24.3 kJ mol⁻¹) and ΔH° (−9.56 kJ mol⁻¹) indicate that the adsorption process is spontaneous and exothermic in nature. Solid phase extraction of 8HQ was also performed. The X-ray diffractometry (XRD), Fourier Transform Infrared (FTIR) and thermogravimetric (TG) analyses were carried out in order to confirm the 8HQ adsorption onto bentonite. According to the obtained results, natural bentonite can be a reusable and effective adsorbent for the removal of 8HQ.     

Preparation of activated carbon from a renewable bio-plant of Euphorbia rigida by H2SO4 activation and its adsorption behavior in aqueous solutions

The use of activated carbon obtained from Euphorbia rigida for the removal of a basic textile dye, which is methylene blue, from aqueous solutions at various contact times, pHs and temperatures was investigated. The plant material was chemically modified with H₂SO₄. The surface area of chemically modified activated carbon was 741.2 m² g⁻¹. The surface characterization of both plant- and activated carbon was undertaken using FTIR spectroscopic technique. The adsorption process attains equilibrium within 60 min. The experimental data indicated that the adsorption isotherms are well described by the Langmuir equilibrium isotherm equation and the calculated adsorption capacity of activated carbon was 114.45 mg g⁻¹ at 40° C. The adsorption kinetics of methylene blue obeys the pseudo-second-order kinetic model and also followed by the intraparticle diffusion model up to 60 min. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to estimate the nature of adsorption. The activation energy of the system was calculated as 55.51 kJ mol⁻¹. According to these results, prepared activated carbon could be used as a low-cost adsorbent to compare with the commercial activated carbon for the removal textile dyes from textile wastewater processes.     

NbTi0.5Ni0.5O4 as anode compound material for SOFCs

NbTi_0.5Ni_0.5O₄ (NTNO) has been prepared using solid state synthesis and investigated as a potential anode material. The oxide form of NTNO has single phase rutile-type structure with tetragonal (P42/mnm) space group. The reduced form is a composite of nano-scaled particles of metallic Ni and Nb_1.33Ti_0.67O₄ phase. Reduced NTNO showed high electronic conductivity up to 280 S.cm^− 1 at 900 °C in reducing atmosphere, but suffers from low CTE equal to 3.78 10^− 6 K^− 1. Studies of NTNO as anode material were carried out in a three electrode - electrochemical half cell configuration under pure humidified H₂ at 900 °C using a 2 mm thick zirconia electrolyte and without any additional current collector material. The results show a reasonable series resistance (R_s) equal to 2.7 Ωcm² (about 50% higher than for metallic gold layers) indicating a good current collection performance for a 10 μm layer of material. The polarization resistance (R_p) was equal to 33 Ωcm² and is attributed to a poor density of three phase boundaries (TPB) and shortage of oxide ion conduction in the anode layer. The results show the potential of NTNO as an anode material, especially after optimization of the microstructure towards the increase of TPB length.     

Structural and surface properties of Si1−xGex thin films obtained by reduced pressure CVD

This paper investigates the structure and surface characteristics, and electrical properties of the polycrystalline silicon-germanium (poly-Si_1−xGe_x) alloy thin films, deposited by vertical reduced pressure CVD (RPCVD) in the temperature range between 500 and 750 °C and a total pressure of 5 or 10 Torr. The samples exhibited a very uniform good quality films formation, with smooth surface with rms roughness as low as 7 nm for all temperature range, Ge mole fraction up to 32% (at 600 °C), textures of 〈2 2 0〉 preferred orientation at lower temperatures and strong 〈1 1 1〉 at 750 °C, for both 5 and 10 Torr deposition pressures. The ³¹P⁺ and ¹¹B⁺ doped poly-Si_1−xGe_x films exhibited always lower electrical resistivity values in comparison to similar poly-Si films, regardless of the employed anneal temperature or implantat dose. The results indicated also that poly-Si_1−xGe_x films require much lower temperature and ion implant dose than poly-Si to achieve the same film resistivity. These characteristics indicate a high quality of obtained poly-Si_1−xGe_x films, suitable as a gate electrode material for submicron CMOS devices.     

In vitro estimation of mean sound speed based on minimum average phase variance in medical ultrasound imaging

Effective receive beamforming in medical ultrasound imaging is important for enhancing spatial and contrast resolution. In current ultrasound receive beamforming, a constant sound speed (e.g., 1540 m/s) is assumed. However, the variations of sound speed in soft tissues could introduce phase distortions, leading to degradation in spatial and contrast resolution. This degradation becomes even more severe in imaging fatty tissues (e.g., breast) and with obese patients. In this paper, a mean sound speed estimation method where phase variance of radio-frequency channel data in the region of interest is evaluated is presented for improving spatial and contrast resolution. The proposed estimation method was validated by the Field II simulation and the tissue mimicking phantom experiments. In the simulation, the sound speed of the medium was set to 1450 m/s and the proposed method was capable of capturing this value correctly. From the phantom experiments, the −18-dB lateral resolution of the point target at 50 mm obtained with the estimated mean sound speed was improved by a factor of 1.3, i.e., from 3.9 mm to 2.9 mm. The proposed estimation method also provides an improvement of 0.4 in the contrast-to-noise ratio, i.e., from 2.4 to 2.8. These results indicate that the proposed mean sound speed estimation method could enhance the spatial and contrast resolution in the medical ultrasound imaging systems.     

Electrical properties vs. microstructure of nanocrystallized V2O5-P2O5 glasses — An extended temperature range study

An electronically conducting nanomaterial was synthesized by nanocrystallization of a 90V₂O₅·10P₂O₅ glass and its electrical properties were studied in an extended temperature range from − 170 to + 400 °C. The conductivity of the prepared nanomaterial reaches 2 ? 10^− 1 S cm^− 1 at 400 °C and 2 ? 10^− 3 S cm^− 1 at room temperature. It is higher than that of the original glass by a factor of 25 at room temperature and more than 100 below − 80 °C. A key role in the conductivity enhancement was ascribed to the material's microstructure, and in particular to the presence of the large number of small (ca. 20 nm) grains of crystalline V₂O₅. The observed conductivity dependencies are discussed in terms of the Mott's theory of the electronic hopping transport in disordered systems. Since V₂O₅ is known for its ability to intercalate lithium, the presented results might be helpful in the development of cathode materials for Li-ion batteries.     

Structural and optoelectronic properties of vacuum evaporated SnS thin films annealed in argon ambient

In this work, 650 nm polycrystalline SnS thin films were grown by thermal evaporation of high purity tin sulfide powder at 250 °C substrate temperature, followed by post deposition annealing at 200 °C and 300 °C for 2, 4 and 6 h, and at 400 °C for 2 and 4 h in argon ambient. The XRD pattern of the as-deposited and annealed SnS films led to the conclusion that the as-deposited films were polycrystalline in nature with preferentially oriented along (1 1 1) direction. The direct bandgap of all the films was found to be observed between 1.33 and 1.53 eV. Except for annealing at 400 °C all the films were nearly stoichiometric in nature, suggesting lower rate of desulfurization at that ambient. However, higher annealing temperature has resulted in the segregation of tin phase. All the films showed good absorption in the visible range. The as-deposited and annealed films showed p-type conductivity. Hall measurement revealed the carrier concentration and mobility ranging from 10¹⁵ to 10¹⁶ cm⁻³ and 0.8 to 31.6 cm² V⁻¹ s⁻¹ respectively. The photoconductivity measurements of all the SnS films were carried out by recording the lowering of resistance of the respective films with time under illumination.     

Molten salt synthesis of Li1 + x (Ni0.5Mn0.5)1 − xO2 as cathode material for Li-ion batteries

Li_1 + x(Ni_0.5Mn_0.5)_1 − xO₂ cathode material for Li-ion batteries has been prepared by a molten salt method using Li₂CO₃ salt. The influences of synthetic temperature and time have been intensively investigated. It is easy to obtain materials with a hexagonal α-NaFeO₂ structure except broad peaks between 20° and 25°. Nickel in Li_1 + x(Ni_0.5Mn_0.5)_1 − xO₂ is oxidized to a trivalent state while manganese maintained a tetravalent state. It is found that the discharge capacities of all samples increase with cycling. The sample prepared at 850 °C for 5 h has a discharge capacity of 130 mAh g^− 1 between 2.5 and 4.5 V versus V_Li+/Li at a specific current of 0.13 mA cm^− 2 after 50 cycles at 25 °C.     

Electrical characterisation of ruthenium Schottky contacts on n-Ge (1 0 0)

Ruthenium (Ru) Schottky contacts were fabricated on n-Ge (1 0 0) by electron beam deposition. Current–voltage (I–V), deep level transient spectroscopy (DLTS), and Laplace-DLTS techniques were used to characterise the as-deposited and annealed Ru/n-Ge (1 0 0) Schottky contacts. The variation of the electrical properties of the Ru samples annealed between 25 °C and 575 °C indicates the formation of two phases of ruthenium germanide. After Ru Schottky contacts fabrication, an electron trap at 0.38 eV below the conduction band with capture cross section of 1.0×10⁻¹⁴ cm⁻² is the only detectable electron trap. The hole traps at 0.09, 0.15, 0.27 and 0.30 eV above the valence band with capture cross sections of 7.8×10⁻¹³ cm⁻², 7.1×10⁻¹³ cm⁻², 2.4×10⁻¹³ cm⁻² and 6.2×10⁻¹³ cm⁻², respectively, were observed in the as-deposited Ru Schottky contacts. The hole trap H(0.30) is the prominent single acceptor level of the E-centre, and H(0.09) is the third charge state of the E-centre. H(0.27) shows some reverse annealing and reaches a maximum concentration at 225 °C and anneals out after 350 °C. This trap is strongly believed to be V–Sb₂ complex formed from the annealing of V–Sb defect centre.     

Thermodynamics of nitrogen adsorption on the zeolite H-FER

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-FER results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted acid groups. This hydrogen bonding interaction leads to activation, in the IR, of the fundamental NN stretching mode, which appears at 2331 cm⁻¹. From the infrared spectra taken over a temperature range, while simultaneously recording integrated IR absorbance, temperature and nitrogen equilibrium pressure, the thermodynamics of the adsorption process was studied. The standard adsorption enthalpy and entropy resulted to be ΔH° = −20(±1) kJ mol⁻¹ and ΔS° = −131(±10) J mol⁻¹ K⁻¹, respectively.