Evolution and characterization of dynamically recrystallized microstructure in a titanium-modified austenitic stainless steel using ultrasonic and EBSD techniques

A C-scan ultrasonic imaging system was used to investigate the microstructural evolution during dynamic recrystallization (DRX) of a 15Cr–15Ni–2.2Mo–Ti modified austenitic stainless steel (alloy D9). Four specimens were forged at 1273 K to different strains in the range 0.1–0.5. Specimens with true strains of 0.2 or lower did not show any variation in the amplitude of the first back-wall echo. However, a visible variation in the C-scan image was observed at and above the 0.3 strain level. This variation was attributed to the evolution of fine grains. The formation of fine grains was related to DRX, as indicated by electron backscattered diffraction. This study also revealed the characteristics of the DRX or ‘necklace grains’, as opposed to the so-called parent grains or rest of the microstructure.     

Simulation and assessment of stray light effects in infrared cameras using non-sequential ray tracing

In this article, we have evaluated the stray light effects in infrared cameras operating in the 3–5 μm waveband having cooled focal plane array detectors. A non-sequential ray tracing method is used to model the multiple reflections from polished lens surfaces as well as diffused scattering from rough mechanical surfaces inside the camera housing. The flux signature on the detector surface due to the self-emission of in-band radiation from the lenses and camera housing is calculated. The flux signature due to sources beyond the nominal field-of-view of the camera is also calculated. Light splitting into multiple diffraction orders from diffractive lens surfaces is taken into account both in the transmission and the reflection paths. The wavelength and angle dependent reflection coefficient of the anti-reflection coatings on the polished lens surfaces is taken into account. The effect of local heating of camera mounts on the stray light signature on the detector surface is also evaluated. The results show that using the non-sequential ray tracing method, useful predictions can be made for the stray light signature in the infrared cameras. Such calculations can be used to identify areas in the camera housing which need to be temperature stabilized to reduce their detrimental stray-light signature.