Partial cellulose acetylation in 1-ethyl-3-methylimidazolium acetate induced by dichloromethane

Cellulose acetate (CA) is one on the most important cellulose derivatives. The use of ionic liquids in cellulose processing was recently discovered to not exclusively act as a solvent but also as a reagent. Recent studies showed that bulky chlorides as well as acetyl chloride mixed with ionic liquids can facilitate cellulose acetylation. This work focused on a simple chloro-organic cosolvent, dichloromethane (DCM), and showed the ability of this relatively small molecule, mixed with the ionic liquid, to facilitate homogenous acetylation by displacement of the acetate ion of the ionic liquid with a chloride ion. Maximal acetylation achieved by this method was a degree of substitution (DS) of 1.9, were only a small fraction of DCM was utilized for acetylation, well below even that expected for equimolar reaction. The degree of substitution was controlled by the dichloromethane content, thus controlling its solubility in water. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2458–2462     

Surface tension of concentrated cellulose solutions in 1-ethyl-3-methylimidazolium acetate

Four sources of cellulose with different molecular weights were dissolved in the ionic liquid 1-ethyl-3-methylimidazolium acetate at 100 °C over a 10 h period. The solution densities were determined and these results were subsequently utilised to access the influence of dissolved cellulose on surface tension properties of cellulose/ionic liquid solutions. Surface tension measurements revealed increasing molecular weight and concentration reduced surface tension while temperature increases showed the opposite effect. These results are consistent with that of repulsive polymer-wall interactions near the interface in good solvent conditions. The semi-flexible nature of this carbohydrate in solution can help explain deviations of these results when compared to ideal flexible chains.     

Light scattering in diluted solutions of cellulose and hydroxypropylcellulose in 1-ethyl-3-methylimidazolium acetate

Diluted solutions of cellulose and hydroxypropylcellulose in 1-ethyl-3-methylimidazolium acetate were studied by the method of static light scattering. Mean molecular masses and the size of the particles of the studied polymers in solution, as well as the values of the second virial coefficient are reported.     

Interactions of collagen and cellulose in their blends with 1-ethyl-3-methylimidazolium acetate as solvent

Collagen/cellulose blended solutions with collagen/cellulose mass ratio (Col/Cel) of 0, 1/40, 1/20, 1/10 and 1/5 were prepared using [Emim]Ac as solvent. The interactions between the two polymers before and after regeneration were investigated. In steady shear flow, all of the experimental viscosity values were greater than those of the estimated values calculated from the log-additivity rule for each sample, suggesting interactions between the two polymers in solutions. All solutions exhibited shear thinning behavior and the flow curves could be described by Cross model. Zero shear viscosity (η ₀) versus Col/Cel was examined and a linear increase (from 8.73 to 16.39 Pa·s) can be observed for η ₀ as Col/Cel ≤ 1/10, while there was only a slight increase (from 16.39 to 18.42 Pa·s) in η ₀ as Col/Cel increased to 1/5. Dynamic rheology results suggested the existence of aggregates in solution with Col/Cel = 1/10. Furthermore, the activation energy of solution was 84.5 kJ mol^?1 as Col/Cel = 1/10, higher than that of cellulose solution (44.2 kJ mol^?1). Regenerated films were prepared and characterized to trace back the interactions between the two polymers in [Emim]Ac. Fourier transform infrared spectroscopy indicated the hydrogen-bond interaction between collagen and cellulose in films. The denaturation temperature of collagen in films with Col/Cel ≤ 1/10 could be improved, but it was decreased with the increase of collagen content, and finally was reduced to be close to that of collagen as Col/Cel = 1/5. The features of dynamic mechanical analysis for films were indicative of the lack of homogeneity between collagen and cellulose as Col/Cel = 1/5. Atomic force microscopy images further confirmed the phase-separation when Col/Cel = 1/5.     

The effect of subcritical carbon dioxide on the dissolution of cellulose in the ionic liquid 1-ethyl-3-methylimidazolium acetate

The ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([emim][OAc]) readily dissolves high concentrations of cellulose. However, the high viscosity of [emim][OAc] (162 cP at 20 °C) could limit its use as a solvent for cellulose. Dissolved CO₂ has been shown to decrease the viscosity of ILs. In this study, a 50 psi CO₂ environment was applied for the dissolution of cellulose in [emim][OAc] to determine if the cellulose dissolution could be enhanced. Dissolution profiles of 4 wt% cellulose dissolved in [emim][OAc] were obtained over a 24 h period. A 75% increase in the amount of dissolved cellulose was observed with the application of a 50 psi CO₂ environment.     

Viscoelasticity and rheology in the regimes from dilute to concentrated in cellulose 1-ethyl-3-methylimidazolium acetate solutions

Dynamic rheological behaviors of α-cellulose 1-ethyl-3-methylimidazolium acetate ([Emim]Ac) solutions were investigated in a large range of concentrations (0.1–10 wt %) at 25 °C. On the basis of data from the dynamic viscoelastic test, the exponents of the specific viscosity η _sp versus concentration c were determined as 1.0, 2.0 and 4.7 for dilute, semidilute unentangled and entangled regimes respectively, which were in accordance with the scaling prediction for neutral polymer in θ solvent. The intrinsic viscosity [η] of the solution was determined to be 253 mL/g at 25 °C. The linear viscoelastic response of the dilute and semidilute unentangled solutions could be described successfully by the Zimm and Rouse model (ν = 0.5 for θ solution) respectively, suggesting that the motion of cellulose chain in [Emim]Ac changed from Zimm to Rouse model with increasing concentration. At low concentrations, failure of the Cox–Merz rule with steady shear viscosity larger than complex viscosity was observed. While as the concentration increased, the deviation from the Cox–Merz rule disappeared due to the formation of homogeneous entanglement structure in cellulose solution.     

Regenerated cellulose film with enhanced tensile strength prepared with ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIMAc)

In this study, environmentally friendly regenerated cellulose films with enhanced tensile strength were successfully prepared by incorporation of plasticizer agents using 1-ethyl-3-methylimidazolium acetate as solvent. The results of morphology from scanning electron microscopy and atomic force microscopy showed that cellulose films possessed homogeneously, and exhibited smooth structure. ¹³C CP/MAS NMR spectra showed that the regenerated cellulose films were transferred from cellulose I to cellulose II. Moreover, the incorporation of plasticizer agents, especially in the presence of glycerol, significantly improved the tensile strength of cellulose film (143 MPa) as compared to the controlled sample. The notable properties of the regenerated cellulose films are promising for applications in transparent packaging.     

Enzymatic saccharification of cellulose in aqueous-ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate-DMSO media

Ionic liquid (IL) 1-ethyl-3-methylimidazolium dimethylphosphate ([Emim]DMP) was chosen as an environment-friendly solvent to enzymatically hydrolyze cellulose in situ. Under optimal reaction condition, 80.2 % of cellulose (10 mg mL⁻¹) were converted to glucose in aqueous-IL-DMSO (φ _r = 74: 25: 1) media at 55°C in 18 h. Finally, fermentability of the recovered hydrolyzates was evaluated using Saccharomyces cerevisiae which is able to ferment hydrolyzates efficiently, the ethanol production was 0.44 g g⁻¹ of glucose within 24 h of the process. Such information is vital for the saccharification of more complex cellulose materials and for the fermentation of hydrolyzates into biofuel.     

Thermophysical properties of 1-methyl-3-methylimidazolium dimethylphosphate and 1-ethyl-3-methylimidazolium diethylphosphate

The density and surface tension of 1-methyl-3-methylimidazolium dimethylphosphate, [C₁mim](CH₃O)₂PO₂ and 1-ethyl-3-methylimidazolium diethylphosphate, [C₂mim](CH₃CH₂O)₂PO₂ ionic liquids have been measured over the temperature range from (283.15 to 338.15) K. The coefficients of thermal expansion were calculated from the experimental density results using an empirical correlation for T = (283.15 to 338.15) K. Molecular volume and standard entropies of these ILs were calculated from the experimental density values. The surface properties of ILs were investigated. The critical temperature and enthalpy of vapourization were also discussed.     

Impact of 1-butyl-3-methylimidazolium chloride on the electrospinning of cellulose acetate nanofibers

Additives like ionic liquids (ILs) have proven to be excellent materials useful in improving the electrospinnability and conductivity of both synthetic and biopolymers. The aim of this study is to investigate the effect of 1-buthyl-3-methylimidazolium chloride [BMIM]Cl on the electrospinnability of cellulose acetate (CA). The results showed that [BMIM]Cl has the greater effect on viscosity and conductivity of the spinning solution while the morphology of the nanofibers significantly improved as the concentration of the IL increases from 0% to 12% (v/v) of [BMIM]Cl. To understand the interaction between CA and [BMIM]Cl, Fourier-transform infrared spectroscopy (FTIR) has been used. Observations by scanning electron microscopy (SEM) suggested that [BMIM]Cl significantly altered the morphology of the CA nanofibers and 12% (v/v) of [BMIM]Cl would be an ideal concentration producing uniform fibers with a mean diameter of 180nm. In addition, the membranes showed a significant increase in conductivity (from 0 to 2.21 × 10^?7S/cm) as the concentration of ionic liquid increases up to 12% (v/v) that indicates a successful loading of IL inside the nanofibers.     

Electronic structure and normal vibrations of the 1-ethyl-3-methylimidazolium ethyl sulfate ion pair

Electronic and structural properties of the ion pair 1-ethyl-3-methylimidazolium ethyl sulfate are studied using density functional methods. Three locally stable conformers of the ion pair complex are considered to analyze molecular interactions between its cation and anion. Manifestations of these interactions in the vibrational spectra are discussed and compared with experimental IR and Raman spectroscopy data. NBO analysis and difference electron density coupled with molecular electron density topography are used to interpret the frequency shifts of the normal vibrations of the ion pair, compared to the free anion and cation. Excitation energies of low-lying singlet excited states of the conformers are also studied. The density functional theory results are found to be in a reasonable agreement with experimental UV/vis absorption spectra.     

Carbon dioxide solubility in 1-ethyl-3-methylimidazolium trifluoromethanesulfonate

In this work, we present new solubility results for carbon dioxide in the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethanesulfonate for temperatures ranging from (303.2 to 343.2) K and pressures up to 5.9 MPa using a thermogravimetric microbalance. Carbon dioxide solubilities were determined from absorption saturation (equilibrium) results at each fixed temperature and pressure. The buoyancy effect was accounted for in the evaluation of the carbon dioxide solubility. A highly accurate equation of state and a group contribution predictive method for carbon dioxide and for ionic liquids, respectively, were employed to determine the effect of buoyancy on carbon dioxide solubility. The solubility measurements are presented as a function of temperature and pressure. An extended Henry’s law equation was used to correlate the present experimental solubility values and the result was satisfactory.     

Ionic liquid 1-ethyl-3-methylimidazolium acetate: an attractive solvent for native chemical ligation of peptides

The ionic liquid 1-ethyl-3-methylimidazolium acetate ([C₂mim][OAc]) was successfully used as alternative solvent for native chemical ligation of peptide fragments to produce model peptide LYRAXCRANK (X = G, A, L, N, Q, K, and F). The commonly used buffer system including thiol additives such as thiophenol and benzyl mercaptan can be replaced by the nontoxic ionic liquid [C₂mim][OAc]. In addition to improving the solubility of the peptides in [C₂mim][OAc], yields and rates of the ligation reactions were found to be efficiently enhanced.     

Physicochemical properties of 1-butyl-3-methylimidazolium acetate

Characteristic IR and UV absorption bands, as well as oxidation half-wave potential on a platinum disc electrode in the cyclic mode were determined for the low-temperature hydrophilic ionic liquid 1-butyl-3-methylimidazolium acetate. Temperature dependences of the refractive index, density, and ansolute viscosity were determined in the temperature range 298–328 K. The activation energy of viscous flow was calculated.     

1-乙基-3-甲基咪唑四氟硼酸盐离子液体的量子化学研究

The results of the quantum chemistry study of the ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM+BF4-) were reported. The ab initio method and density functional theory (B3LYP method) was used to optimize the stable structure of the gas phase ion pair at the level of 6-311++G** basis set, respectively. An IR spectra for EMIM+BF4- were obtained through the vibrational analysis. The changes of atomic charge assignments have been investigated using the Natural Bond Orbital method. The computational results show that there exist hydrogen bonds and other weak interactions between the cation and the anion. Using counterpoise correction method to estimate the basis set superposition error, the interaction energy between the cation and anion is 346.78 kJ/mol.     

Thermodynamic investigations of 1-ethyl-3-methylimidazolium tetrafluoroborate and cycloalkanone mixtures

The densities, ρ, speeds of sound, u, and heat capacities, (C _P)_mix, for binary 1-ethyl-3-methylimidazolium tetrafluoroborate (1) + cyclopentanone or cyclohexanone (2) mixtures within temperature range (293.15–308.15 K) and excess molar enthalpies, H ^E, at 298.15 K have been measured over the entire composition range. The excess molar volumes, V ^E, excess isentropic compressibilities, \( \kappa_{\text{S}}^{\text{E}}, \) and excess heat capacities, \( C_{\text{P}}^{\text{E}}, \) have been computed from the experimental results. The V ^E, \( \kappa_{\text{S}}^{\text{E}} \) , H ^E, and \( C_{\text{P}}^{\text{E}} \) values have been calculated and compared with calculated values from Graph theory. It has been observed that V ^E, \( \kappa_{\text{S}}^{\text{E}} \) , H ^E, and \( C_{\text{P}}^{\text{E}} \) values were predicted by Graph theory compare well with their experimental values. The V ^E, \( \kappa_{\text{S}}^{\text{E}}, \) and H ^E thermodynamic properties have also been analyzed in terms of Prigogine–Flory–Patterson theory.     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

Cation-anion interactions in 1-ethyl-3-methylimidazolium trifluoromethanesulfonate-based ionic liquid electrolytes

An important step in developing ionic-liquid-based electrolytes for lithium rechargeable batteries is obtaining a molecular-level understanding of the ionic interactions that occur in these systems. In this study, 1-ethyl-3-methylimidazolium trifluoromethansulfonate ([C2mim]CF3SO3) is complexed with LiCF3SO3, and the local structures of the CF3SO3- and [C2mim]+ ions are investigated with infrared and Raman spectroscopy. The isolation and subsequent refinement of a Li[C2mim](CF3SO3)2 crystal provides further insight into the structure of the [C2mim]CF3SO3-LiCF3SO3 solutions. Minor changes are observed in the infrared and Raman spectra of dilute [C2mim]CF3SO3-LiCF3SO3 solutions compared to pure [C2mim]CF3SO3. However, a suspension of very small Li[C2mim](CF3SO3)2 crystallites forms at a solution composition of [C2mim]CF3SO3:LiCF3SO3 = 10:1 (mole ratio), placing an upper limit on the solubility of LiCF3SO3. Essentially no changes are observed in the vibrational modes of the [C2mim]+ cations over the entire range of LiCF3SO3 compositions studied, suggesting that the addition of these compounds does not significantly perturb the local structure of the [C2mim]+ cations. The salt used in this study has a common anion with the ionic liquid; thus, the ion cloud surrounding the [C2mim]+ ions, which must be primarily composed of CF3SO3- anions, is not significantly altered with the addition of LiCF3SO3.