BaPbO3与BaTiO3多晶态陶瓷缺陷结构对比

BaPbO，是具有类金属导电特性的钙钛矿结构导电陶瓷，其晶体结构由Ba2＋和O^2-离子紧密堆积形成，pb^4＋离子占据由O^2-离子形成的八面体空隙。BaTiO3同为钙钛矿结构的陶瓷材料，由Ba^2＋和O^2-离子紧密堆积形成，Ti^4＋离子占据由O^2-离子形成的八面体空隙。BaPbO3和BaTiO3的A位离子相同,B位离子都为可变价离子。     

新型层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5] 的合成、表征及其共模板作用

在溶剂热体系中,以N,N-二乙基乙二胺为结构导向剂,合成了Al/P为3/4的层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5]单晶,并通过X射线单晶衍射结构分析.XRD,ICP,元素分析,差热-热重分析等手段进行了表征.该化合物属单斜晶系,P2(1)/c空间群,晶胞参数:a=0.90945(2)nm,b=1.46424(4)nm,c=1.87572(5)nm,β=102.672(2)°,Z=4.其阴离子层由AlO4四面体和PO3(=O)四面体单元交替连接构成,形成四、六、八元环拓扑结构,无机层以ABAB方式堆积,两种质子化的有机胺分子N,N-二乙基乙二胺及其重排产物N,N′-二乙基乙二胺填充在层间.用分子动力学模拟方法,考察了标题化合物中有机胺与无机层间的相互作用,讨论了这两种有机胺的共模板作用.     

(NO2Ql)2[Ni(mnt)2]的合成和晶体结构((NO2Ql)+=1-(4-nitrobenzyl)-quilorinium;mnt2-=maleonitriledithiolate)

合成了离子对配合物(NO2Q1)2[Ni(mnt)2],并用元素分析和红外光谱进行了表征.单晶结构分析结果表明三斜晶系,空间群p-1.晶胞参数a=8.2240(16)A,6=10.777(2)A,c=12.137(2)A,α=72.58(3).,β=72.82(3)°,γ=68.78(3)°,V=935.4(3)A3,Z=1.(NO2Ql)+和[Ni(mnt)2]2-分别形成了完全分立的柱状堆积结构.在阴离子堆积柱内,Ni(Ⅱ)离子形成了一维均匀链.阳离子间,比邻的芳环间存在弱的π…π作用.     

H-ZSM-5分子筛形貌对ZnCr2O4/H-ZSM-5双功能催化剂合成气制芳烃催化性能的影响

采用水热法，通过改变合成条件选择性制备出具有球状堆积、薄片状、中空和海绵条状结构的四种不同形貌的H-ZSM-5分子筛，并采用XRD、SEM、Py-FTIR、NH₃-TPD、ICP和N₂物理吸附等手段对其结构性质进行了表征。将具有尖晶石结构的ZnCr₂O₄复合氧化物与不同形貌的H-ZSM-5分子筛组成ZnCr₂O₄/H-ZSM-5双功能催化剂，应用于合成气直接制芳烃（STA）的反应过程，研究了H-ZSM-5分子筛形貌对该双功能催化剂STA性能的影响。结果表明，H-ZSM-5分子筛形貌对ZnCr₂O₄/H-ZSM-5的合成气制芳烃催化性能具有重要影响；不同形貌H-ZSM-5分子筛的芳烃选择性由高到低顺序依次为球状堆积 > 海绵条状 > 中空结构 > 薄片状结构。其中，ZnCr₂O₄氧化物与具有球状堆积结构的H-ZSM-5分子筛组成的ZnCr₂O₄/H-ZSM-5（sphere）双功能催化剂在STA反应过程中表现出最佳的催化性能：在350℃和3.0 MPa条件下，CO转化率为12.6%，芳烃选择性高达68.8%，而甲烷、C_2-4⁰烷烃和CO₂选择性分别降低至1.3%、14.3%和41.4%。这是由于球状堆积H-ZSM-5分子筛粒径适中（约350 nm），孔道长度适宜，适合芳烃产物的扩散但又能避免低碳烃类过早扩散出酸性分子筛孔道，从而有利于合成气转化中间产物的芳构化，提高芳烃产物的选择性。     

MoO3 /SiO2复合正极材料的制备及电化学性能研究

本文通过化学沉淀-热处理方法制备了MoO3正极材料,并通过正硅酸乙酯(TEOS)的水解在MoO3的表面包覆SiO2得到MoO3/SiO2复合正极材料[wSiO2/wMoO3=8%],对制备材料的结构和电化学性能进行了表征。结果表明,得到的MoO3为纯的正交相结构,片状MoO3的粒径大小约200～500 nm,厚度约50 nm。片状颗粒倾向于堆积在一起形成层状结构。在MoO3的表面包覆了一层无定形的SiO2。在电压范围1.5～4.0 V的条件下,以0.1C倍率进行恒电流充放电测试,MoO3/SiO2样品的首次放电容量为332.7 mAh.g-1,库仑效率87.6%。循环20次后,放电容量降为277.7 mAh.g-1。SiO2的包覆降低了MoO3正极材料的初始容量,但循环性能得到了提高。     

利用三维虚拟技术突破物质结构教学*——从演示型工具到探索型工具的转变

针对物质结构教学的抽象性,开发了一套基于三维虚拟技术的物质结构教学软件,可对结构模型进行旋转、平移、缩放、切割、镜像、插入或删除原子(团)及启停预先设置的动画等操作,强大的交互功能不仅能对分子或晶体结构如构造异构、立体异构、晶体的堆积方式、晶胞的划分、配位数、晶体结构中的空隙及空间利用率等问题进行效果极佳的可视化教学,另一方面,通过对B₁₂与C₆₀分子空间构型转变的探究揭示数学构型的重要性,通过对六方晶胞占有原子个数的探究修正晶胞模型,通过对金属晶体的4种基本堆积方式成因的探究提出“半密置层”概念来完善紧密堆积规律等案例,展示出三维虚拟技术在微观结构探索发现方面的巨大潜力。     

杂化化合物(C7H11N2)2[CdCl4]·0.5H2O的晶体结构、光谱表征和光学性质

开发了标题化合物（C₇H₁₁N₂）₂[CdCl₄]·0.5H₂O （C₇H₁₁N₂=4-（二甲基氨基）吡啶鎓）的制备程序,并得到良好的收率和纯度。Cd（Ⅱ）离子在略微扭曲的四面体环境中与4个氯离子配位。晶体排列显示出层状结构,有机层和无机层交替排列,平行于（001）平面,位于x=n+1/2（n∈Z）。在晶体中,有机层和无机层通过C—H…Cl、C—H…O、N—H…Cl和N—H…O氢键相互作用连接。Hirshfeld表面分析和结构的指纹图表明分子堆积受氢键和π堆积的控制。UV-Vis漫反射光谱使我们能够用Tauc外推法确定具有半导体特性的3.596 eV的直接带隙。观察到的在562 nm处具有最大值的光致发光带归属于4-（二甲基氨基）吡啶鎓阳离子中的激发π-π^*态。     

一维[Pd(mnt)2]-自旋体系磁交换作用的密度泛函理论(DFT)分析

4个一维磁链化合物[R-BzPy][Pd(mnt)2](R-BzPy+=对位取代苄基吡啶阳离子;R=Cl(化合物1),Br(化合物2),I(化合物3)和NO2(化合物4))具有相似的晶体堆积结构,即,[Pd(mnt)2]-和R-BzPy+分别形成完全分列的柱状堆积。这一结构特征与其类似化合物[R-BzPy][Ni(mnt)2]相似。但是,[Pd(mnt)2]-和[Ni(mnt)2]-2个系列化合物结构之间存在明显差异:(1)室温下,[R-BzPy][Ni(mnt)2]晶体中[Ni(mnt)2]-和R-BzPy+堆积柱是均匀的;而[R-BzPy][Pd(mnt)2]晶体中[Pd(mnt)2]-和R-BzPy+堆积柱是不均匀的。(2)在两个系列化合物阴离子堆积柱内,相邻[Pd(mnt)2]-分子平面之间距离比相邻[Ni(mnt)2]-分子平面之间距离短。在[Pd(mnt)2]-堆积柱内,[Pd(mnt)2]-离子之间反铁磁交换作用非常强,导致了化合物几乎呈抗磁性。在密度泛函理论框架下,利用对称性破损方法,我们计算了[Pd(mnt)2]-离子之间磁交换常数。在svwn/lanl2dz和bpw91/lanl2dz水平上的计算结果与磁化率拟合结果一致。理论分析揭示,在[Pd(mnt)2]-堆积柱内,[Pd(mnt)2]-离子之间强反铁磁交换与其π-型前线轨道有效重叠密切相关。     

超分子化合物[UO2Cl4][phenH]2的合成、晶体结构、荧光性质及[UO2Cl4][phenH]2/PVA薄膜的发光性能

水热条件下合成了一种含铀的超分子化合物[UO2Cl4][phenH]2(phen=1,10-邻菲罗啉),进行了X射线单晶衍射、红外光谱、紫外光谱和荧光光谱分析。 晶体结构分析表明,该化合物由2个[phenH]+阳离子和1个阴离子[UO2Cl4]2-组成。 红外光谱和X射线单晶衍射表明,标题化合物的三维框架是由N-H…Cl、C-H…Cl和C-H…O弱氢键相互作用所构建。 中心U原子是六配位,有4个Cl原子和2个O原子。 此外,没参与配位的phen利用氢键和π…π堆积与[UO2Cl4]2-相互作用。 含U原子的阴离子是一种扭曲八面体结构。 利用溶胶-凝胶法合成了化合物的PVA薄膜。 标题化合物和薄膜均有较强的荧光性。CCDC:713149     

氨蒸发诱导法制备纳米结构LiNi1/3Co1/3Mn1/3O2及其作为高功率型锂离子电池正极材料的性能

采用氨蒸发诱导法成功制备出纳米结构LiNi_1/3Co_1/3Mn_1/3O₂正极材料,借助X射线衍射（XRD）分析、扫描电镜（SEM）、透射电镜（TEM）、高分辨率透射电镜（HRTEM）、能量分散谱（EDS）和比表面测试等表征手段及恒电流充放电测试研究了其晶体结构、微观形貌和电化学性能. 研究表明该方法制备出的材料具有良好的α-NaFeO₂层状结构,阳离子混排程度低. 纳米片交错堆积而成核桃仁状形貌,片与片之间形成许多纳米孔,而且纳米片的侧面属于{010}活性面,能够提供较多的锂离子的脱嵌通道. 在室温下及3.0-4.6 V充放电范围内,该材料在电流密度为0.5C、1C、3C、5C和10C时放电比容量分别为172.90、153.95、147.09、142.16 和131.23mAh·g^-1. 说明其具有优异的电化学性能,非常有潜力用于动力汽车等高功率密度锂离子电池中.     

Synthesis and Structure of a Zinc(Ⅱ)Complex:[Zn(Pybta)·Cl2]n

The title compound, [Zn(Pybta)Cl2]n (Pybta = 1-(2-pyridylmethyl)benzontriazole), has a zigzag chain structure. It crystallizes in the monoclinic system, space group P21/c with a = 9.0103(11), b = 17.0276(18), c = 9.2288(11) A, β = 101.309(6)°, Mr= 346.51, V= 1388.4(3) (A)3, Z= 4, Dc= 1.658 g/cm3, F(000) = 696, μ = 2.143 mm-1, the final R = 0.0492 and wR = 0.1236 for 2545 observed reflections with Ⅰ 2σ(Ⅰ). The Zn atom is four-coordinated by two N and two Cl atoms, forming a slightly distorted tetrahedral geometry. Each zigzag chain links its adjacent symmetry-related equivalents via multiple π-π interactions, which are not frequently observed in the previously reported architectures.     

Automation of Structure Analysis. Part II. Automation of the Evaluation

The extent to which it is possible to automate the determination of a structure from the data collected with automatic measuring equipment is discussed. The development of the automatic evaluation is synchronous with that of digital computer program.—Even the simple calculation of structure factors from the intensities (i.e. the analysis of the geometrical and physical intensity factors) takes several weeks when the many thousand reflections are processed “manually”, i.e. with a desk calculator. A large electronic computer, on the other hand, executes these calculations in a few seconds. Nevertheless, even the largest computers available at present are too small for many of the complex steps in the calculation and for the quantity of data involved. Evaluation methods which, owing to long computing times, can at present only be tested on relatively simple structures will become more attractive with the advent of machines with computing times in the nanosecond range. For corrigendum see DOI: 10.1002/anie.196605112     

Crystal Structure Refinement of Lead Cyanamide and the Stiffness of the Cyanamide Anion

The crystal structure of lead cyanamide, PbNCN, has been refined on the basis of a single crystal grown from solution. PbNCN crystallizes in space group Pnma (Z = 4) with a = 555.66(4) pm, b = 386.77(2) pm, and c = 1173.50(8) pm. The cyanamide anion exhibits C–N bond lengths of 116 pm and 130 pm, and the N–C–N angle is 176°. Quantum‐chemical DFT calculations indicate that the cyanamide unit is comparatively easy to distort.     

X-ray diffraction investigation of siloxanes. I. Effects of organic substituents at the silicon atoms on the structure of acyclic trisiloxane-1,5-diols and on formation of different hydrogen bond systems

The molecular and crystal structure of four acyclic trisiloxane compounds, which differ in substituents at the silicon atoms (Ph-phenyl, mPh-methoxyphenyl, 2mPh-dimethoxyphenyl), was investigated by X-ray diffraction analysis. Due to intermolecular hydrogen bonding between the oxygen atoms of the diol fragments, the crystal structure of 1,1,5,5-tetramethyl-3,3-diphenyl-1,3,5-trisiloxane-1,5-diol (C₁₆H₂₄O₄Si₃) (I) is a double chain architecture with hydrogen-bonded dimeric motifs of C(8)R ₄ ⁴ (12) type in graph set representation. In 1,1,5,5-tetramethyl-3,3-(2-methoxybenzo)-1,3,5-trisiloxane-1,5-diol (C₁₈H₂₈O₆Si₃) (II) and 1,1,5,5-tetramethyl-3,3-(2,6-dimethoxybenzo)-1,3,5-trisiloxane-1,5-diol (C₂₀H₃₂O₈Si₃) (III), a double chain structure with a graph set R ₃ ³ (8)D ₃ ³ (10) is formed. In contrast to I–III, 1,1,3,3,5,5-hexaphenyl-1,3,5-trisiloxane-1,5-diol (C₃₆H₃₂O₄Si₃) (IV) has an intramolecular hydrogen bond S(8). The independent molecules are joined by O-H...O intermolecular hydrogen bonds into centrosymmetrical dimers; the system of hydrogen bonds in general may be described as S(8)R ₄ ⁴ (8).     

中学化学物质结构实物模型研究述评——基于近10年Journal of Chemical Education载文的研究

物质结构实物模型可以把微观现象宏观化、抽象事物具体化,提高学生的模型认知水平和建模能力。针对国内物质结构实物模型存在样式单一、成本较高等不足,基于近10年Journal of Chemical Education载文的研究,介绍了研究者开发的多种新颖、实用的实物模型。常见的思路和方法有利用生活中的材料拼接,或利用3D打印技术制作,甚至可以直接借助已有实物模型。这些方法以生活化的材料降低模型的制作成本,以模块化的设计给予学生创新的空间,以跨学科的理念发展学生的综合能力,以期为我国中学化学物质结构的教学及其研究提供借鉴和启示。     

Crystal and Molecular Structures of Two Derivatives of 1, 3a, 5-Trisubstituted-3a ,4,5,11-Tetrahydro-1,2,4-Oxadiazolino[5,4-d] [1, 5]Benzothiazepine

The structures of two derivatives of the title compound [C24H22N2OS, Mr = 386. 5 for (1); C25H22N2O3S, Mr = 430. 5 for (2)] were determined by using X-ray single-crystal strcuture analysis method. The final discrepancies are R = 0. 071 and 0. 077, respectively, for the reflections measured on a four-circle diffractometer. The space group for compound (1) is P bca with a=1. 6639(4), b=2.0286(3), c= 1.1742(1) nm, V = 3. 964(1) nm3, F(000) = 1632 e, Z=8; and (2) belongs to P21/n space group, and the cell dimensions are a=1. 1115(4), b=0. 8932(7), c=2. 186(3) nm, β=97. 52 (1)°? V=2.151(4) nm3, F(000) = 904 e, Z=4.The molecular backbones are very similar, each is a tricyclic system. The central seven-membered ring is in a twisted-boat conformation, and is cis-fused to 1,2,4-oxa-diazolino ring, while the latter moiety is in an envelope form. There are conjugated but non-coplanar effects in each structure. All bond lengths and angles in the molecules are normally acceptable. The crystal structure on the whol     

Crystal and Molecular Structure of Cyanuric Acid

ＣｒｙｓｔａｌａｎｄＭｏｌｅｃｕｌａｒＳｔｒｕｃｔｕｒｅｏｆＣｙａｎｕｒｉｃＡｃｉｄＣｈｅｎＣｈａｎｇ－Ｚｈａｎｇ；ＳｈｉＪｉａｎ－ＱｉｕＬｉｎＺｈｏｕ－Ｂｉｎ；ＧａｏＤｏｎｇ－Ｓｈｏｕ；ＨｕａｎｇＸｉａｏ－Ｙｉｎｇ；ＬｉＤｉｎｇ（ＦｕｊｉａｎＩｎｓ...     

On the icosahedral quasicrystal structure

The icosahedral quasicrystal structure is derived with local symmetry operations. Calculated Fourier transforms are compared with electron diffraction patterns. It is proposed that the structure building operations are models for the crystal growing process.     

Effects of a lysophosphatidylcholine and a phosphatidylcholine on the morphology of taurocholic acid-based mixed micelles as determined by small-angle X-ray scattering

We previously showed that Caco-2 cell absorption of β-carotene from taurocholic acid (TA)-based mixed micelles differed depending on the composition of the micelles. In this study, the shapes and sizes of TA-based mixed micelles, that is, mixed micelles of TA, 1-oleoyl-rac-glycerol (MG), oleic acid (OLA), and either 1-palmitoyl-sn-glycero-3-phosphocholine (MPPC; i.e., a lysophospholipid) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC; i.e., a phospholipid) (60:3:1:0.75–12) were determined by using small-angle X-ray scattering (SAXS). We found that increasing the ratio of MPPC in mixed micelles of TA, MG, OLA, and MPPC was responsible for the previously observed enhanced β-carotene absorption by Caco-2 cells and changed the micelle shape from core–shell spherical to core–shell ellipsoidal. In contrast, increasing the ratio of POPC in mixed micelles of TA, MG, OLA, and POPC was responsible for the suppressed β-carotene absorption by the cells, changed the micelle shape from core–shell spherical to core–shell ellipsoidal to core–shell cylindrical, and caused a rapid increase in micelle volume. These results will be useful for understanding the mechanisms that mediate β-carotene absorption by cells and for developing technologies to improve the intestinal absorption of lipophilic components of drugs and nutrients.     

三维网状结构聚金属氧酸盐K4SiW12O40·16H2O的合成及其X射线晶体结构分析

以钨酸钠(Na2WO4·2H2O),硅酸钠(Na2SiO3·9H2O)和氯化钾(KCl)为原料在水溶液中反应制得了标题化合物,单晶X射线结构分析表明,属单斜晶系,空间群Cc,晶胞参数a=2.0180(4),b=2.0178(4),c=1.2498(3)nm,β=90.08(3)°,V=5.0892(18)nm3,Z=4,Dc=4.290g/cm3.对5850个独立的衍射点[I>2σ(I)]进行全矩阵最小二乘法修正后,可靠性因子R1=0.0598.