基于硼酸基功能化的磁性表面印迹聚合物制备及其对目标糖蛋白的识别

以硼酸基功能化的磁性Fe3O4纳米粒子(Fe3O4NPs)为载体,卵清蛋白(OB,一种糖蛋白)作模板分子,多巴胺(DA)为单体,采用表面印迹的方法,制备了一种磁性表面分子印迹聚合物纳米粒子。用平衡吸附实验研究了其吸附性能和识别选择性。结果表明,该分子印迹聚合物对目标糖蛋白(OB)具有较高的选择性和吸附量,并且具有良好的磁性,有利于进行快捷的磁性分离,这将为复杂生物样品中目标糖蛋白的专一性识别提供一种新的途径。     

槲皮素磁性分子印记聚合物的制备及其吸附性能

以槲皮素(Qu)为模板分子、N-乙烯基吡咯烷酮(NVP)和丙烯酸(AA)为功能单体、N,N′-亚甲基双丙烯酰胺(MBA)为交联剂、H2O2-Vc为引发剂、KH570修饰的Fe3O4纳米颗粒为磁性载体,借助表面分子印迹技术制备了能够对Qu进行特异性识别的槲皮素磁性分子印迹聚合物(Qu-MMIPs)。利用X射线衍射仪(XRD)、透射电子显微镜(TEM)、傅里叶变换红外光谱仪(FT-IR)、振动样品磁强计(VSM)和紫外-可见分光光度计(UV-Vis)对样品进行了结构和性能表征。结果表明:Fe3O4磁性载体表面已成功包覆了分子印迹聚合物。与化学组成相同的磁性非印迹聚合物(Qu-MNIPs)相比,Qu-MMIPs对Qu有较高的吸附选择性。静态吸附平衡实验和Scatchard分析结果表明,Qu-MMIPs中存在两类不同的结合位点,平衡解离常数分别为1.646×10-6 mol/L和6.387×10-6 mol/L,最大吸附量分别为23.041mg/g和29.923mg/g。     

具有高选择性吸附的表面分子印迹磁性纤维素微球的制备与性能

以纤维素和纳米Fe₃O₄为原料制得磁性纤维素微球, 在纤维素微球表面选择合适的模板分子, 以甲基丙烯酸、 丙烯酰胺和N,N'-亚甲基双丙烯酰胺为功能单体, 采用水溶液聚合法制得表面分子印迹磁性纤维素微球. 采用傅里叶变换红外光谱(FTIR)、 X射线衍射(XRD)和振动样品磁强计(VSM)等表征了分子印迹聚合物微球的结构. 以罗丹明B(RhB)为模板分子, 通过吸附动力学与吸附热力学实验研究了表面分子印迹磁性纤维素微球对RhB的吸附性能, 结果表明, 制备的表面分子印迹磁性纤维素微球对罗丹明B具有特异性识别作用, 饱和吸附量达到0.542 mg/mg, 吸附平衡时间为10 h左右. 表面分子印迹磁性纤维素微球大大降低了对吸附环境的依赖, 并可重复利用.     

核壳结构的萘夫西林磁性分子印迹聚合物微球的制备及性能

以表面修饰双键的Fe₃O₄@SiO₂纳米颗粒为基体,以萘夫西林(nafcillin)为模板,甲基丙烯酸(MAA)为单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用三步升温聚合法合成了核壳结构的萘夫西林磁性分子印迹聚合物。采用傅里叶变换红外光谱仪(FT-IR)、透射电子显微镜(TEM)、X射线衍射仪(XRD)和振动样品磁强计(VSM)对制备的印迹聚合物微球进行了表征,得到的磁性印迹聚合物微球的粒径在320 nm左右,大小均匀,分散性较好,可以在外加磁场下与溶剂实现快速分离。对磁性印迹和非印迹聚合物进行了吸附性能研究,结果表明该印迹聚合物微球对模板分子具有很高的吸附容量(50.7 mg/g),特异性识别性能良好(印迹因子为2.46),有望应用于实际样品中萘夫西林残留量的富集分析。     

磁性分子印迹聚合物微球的制备及吸附特性研究

通过分子印迹技术,以磺胺(SNM)为模板分子,甲基丙烯酸(MAA)为功能单体,利用Fe3O4磁性纳米微球制备具有特异性识别磺胺的磁性分子印迹聚合物.通过紫外分光光度法对磁性印迹聚合物的吸附性能进行研究,并对吸附特性进行了探讨.利用等温吸附数据进行Scatchard分析,从而推断出印迹聚合物的最大吸附量Qmax为280....     

槲皮素金属配位分子印迹聚合物的识别性能

以槲皮素与Zn(Ⅱ)的配合物为模板,在甲醇溶液中制备金属配位分子印迹聚合物.通过紫外光谱研究了槲皮素与Zn(Ⅱ)的配位方式及配位比,验证了槲皮素、Zn(Ⅱ)和4-乙烯基吡啶之间的三元配位作用.利用红外光谱对产物的结构进行了表征.用平衡结合实验考察了功能单体及交联剂用量对聚合物吸附性能的影响,优化了聚合物的反应配比.同时对系列印迹聚合物的识别体系进行了考察.结果表明,槲皮素-Zn(Ⅱ)模板印迹聚合物对槲皮素-Zn(Ⅱ)的配合物表现出明显的吸附选择性和特异性,对槲皮素结构类似物芦丁和柚皮素的吸附选择性较差,分离因子分别为3.21和1.91.     

沉淀制备双酚Aπ-π堆积自组装印迹聚合物及其特异性识别机理研究

以类雌性激素双酚A为模板分子,选取4-乙烯基吡啶作为功能单体,在极性溶剂甲醇中,通过非共价键完成自组装过程,沉淀聚合制备对双酚A分子具有高度选择性识别和亲和力的分子印迹聚合物.采用紫外-可见光谱研究了双酚A和4-乙烯基吡啶的配合方式以及配位比,结果表明双酚A与4-乙烯基吡啶以配位比1∶2的方式,在极性溶剂中,无法以常用的氢键形成超分子配合物,却可以π-π堆积这种非共价键完成自组装过程.通过红外谱图,验证了沉淀聚合法制备的印迹聚合物可以完成双酚A的印迹和可逆分离.通过扫描电镜和等温吸附实验考察了分子印迹聚合物对模板分子的特异性识别和选择性吸附机理,印迹聚合物的特异性吸附容量为37.39μmol/g,印迹指数为4.31;对其结构类似物四溴双酚A和苯酚的分离因子分别为2.51和2.06,同时对莠去津,萘普生和槲皮素的分离因子分别为2.14,2.26和2.63,证实了分子印迹聚合物在极性溶剂中可以对双酚A分子进行很好的特异性识别,并且识别环境更接近天然分子环境.     

4-甲基咪唑磁性表面分子印迹聚合物的制备及其应用

以4-甲基咪唑(4-MI)为模板分子,甲基丙烯酸(MAA)为功能单体,利用Fe₃O₄磁性纳米微球制备了具有特异性识别能力的磁性表面分子印迹聚合物(MIP),并用红外光谱(FT-IR)、X-射线衍射(XRD)、透射电子显微镜(TEM)和振动样品磁强计(VSM)对聚合物进行了表征,结果显示磁性载体表面包覆了分子印迹聚合物薄层。用紫外分光光度法对4-MI与MAA的相互作用进行了分析,结果表明主客体主要存在形式为1个4-MI被1个MAA所包围。通过紫外分光光度法对磁性印迹聚合物的吸附性能进行了研究,静态吸附平衡实验和Scatchard分析结果表明Fe₃O₄@(4-MI-MIP)中存在两类不同的结合位点,最大吸附量分别为40.31 mg/g和23.07 mg/g,平衡解离常数分别为64.85 mg/L和30.41 mg/L。动力学研究表明准二级动力学方程能较好地拟合动力学实验结果,该过程符合准二级动力学模型。该磁性印迹聚合物应用于环境水样中4-MI的吸附,取得了较满意的结果。     

正丁醇分子印迹聚合物的制备及其吸附性能

以正丁醇为模板分子,采用本体聚合法制备了正丁醇分子印迹聚合物。利用扫描电镜和红外光谱对该聚合物进行表征,并利用动态吸附、静态吸附和选择性吸附实验评价其吸附性能。正丁醇分子印迹聚合物能够特异性识别正丁醇,通过计算得到正丁醇MIPs的分离因子α为2.057,印迹因子IF为2.123。此聚合物制备简单、可重复利用并且表现出良好的选择性,可作为固相萃取填料应用于食品中正丁醇的分离、富集和检测。     

合成引发方式对槲皮素-钴(Ⅱ)配位印迹聚合物结构与性能的影响

以槲皮素-钴(Ⅱ)的配合物为模板分子,在强极性甲醇溶剂中分别采用低温光引发和高温热引发聚合制备槲皮素-钴(Ⅱ)配位印迹聚合物.紫外-可见光谱分析确定了槲皮素与钴(Ⅱ)形成配合物的最佳配位比.根据印迹聚合物的平衡结合量优化功能单体丙烯酰胺用量.利用红外光谱、透射电镜和平衡结合实验,考察不同引发方式对聚合物的结构、微观形貌及结合性能的影响.进一步通过特异吸附容量和印迹指数确定,低温光引发聚合更适于配位分子印迹聚合物的制备.同时研究了不同阳、阴离子对印迹聚合物选择识别性的影响.结果表明光引发的金属配位分子印迹聚合物具有良好的吸附选择性,印迹指数可达3.919.     

有机磷神经毒剂分子印迹聚合物的模拟模板分子

采用DFT/B3LYP-D3(BJ)/6-31G(d,p)计算模拟方法分析探讨了双(对硝基苯基)磷酸酯(BNPP)替代对氧磷(PO)用作有机磷神经毒剂分子印迹聚合物(MIPs)模板分子模拟物的可行性. 通过对比BNPP和PO两种模板分子分别与各种功能单体形成的复合物的构型稳定性和结合能大小, 确认了以4-甲基丙烯酰胺基安替比林(MAAP)为第一功能单体、 甲基丙烯酸(MAA)为第二功能单体组成的双功能单体体系是最佳功能单体体系. 以BNPP为模板分子、 MAAP-MAA为单体体系、 乙二醇二甲基丙烯酸酯(EGDMA)为交联剂、 纳米二氧化硅为载体, 采用表面印迹技术制备了SiO₂@BNPP分子印迹聚合物, 并对聚合物的表面形貌和吸附性能进行了分析. 实验结果表明, 当n(BNPP)/n(MAAP)/n(MAA)/n(EGDMA)为1∶1∶4∶20时, MIPs的吸附容量最大可达19.03 mg/g, 对4-硝基苯酚(4-NP)的分离因子为17.50; MIPs能够快速吸附模板分子, 5 min即可达到吸附平衡量的92%, 动态吸附平衡时间仅为15 min, 重复使用5次后仍能保持良好的吸附能力; 吸附过程符合准二级动力学模型和Langmuir等温吸附模型, Scatchard方程分析表明MIPs中存在两类吸附作用位点. 实验结果与计算模拟结果的一致性表明, 计算模拟对有机磷神经毒剂MIPs的设计和研究具有一定的指导意义.     

电子束辐射聚合制备槲皮素-镍(Ⅱ)金属配位分子印迹聚合物及其识别性能研究

以电子束为辐照射线源,采用辐射聚合法成功制备了槲皮素-Ni(Ⅱ)金属配位分子印迹聚合物.通过紫外光谱研究了槲皮素与Ni(Ⅱ)之间的配位结构、配位作用方式及配位比,并按照1∶2的比例形成稳定配合物,同时也验证了槲皮素、Ni(Ⅱ)及功能单体甲基丙烯酸三者发生了金属配位印迹作用.利用红外光谱对产物的结构进行了表征.透射电镜、扫描电镜、吸附动力学实验分别考察辐射剂量对聚合物的微观形貌、吸附动力学性能的影响,结果表明辐射剂量对印迹聚合物的吸附性能有显著影响.同时选择性吸附实验结果显示该印迹聚合物对槲皮素-Ni(Ⅱ)配合物表现出明显的吸附选择性和特异性,最大结合量可达82.22μmol/g.对黄芩素和柚皮素的吸附选择性较差,分离因子分别为3.915和5.443.     

Preparation of hydrophilic molecularly imprinted polymers for tetracycline antibiotics recognition

Hydrophilic molecularly imprinted polymers(MIPs) were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinting effect and adsorption amounts of hydrophilic MIPs for tetracycline(TC) were greatly improved in water media.Furthermore,the electrochemical sensor fabricated by modifying hydrophilic MIPs on glassy carbon electrode was developed for the determination of TC in foodstuff samples.     

Molecular imprinting of natural flavonoid antioxidants: application in solid-phase extraction for the sample pretreatment of natural products prior to HPLC analysis

As shown in the past years, SPE based on molecularly imprinted polymers (MIPs) may provide significant enhancement of selectivity in sample preparation and analyte preconcentration. The objective of this work was the fabrication of MIPs for the specific adsorption of rutin and quercetin. The two flavonoids were used as the template molecules for the preparation of MIP phases in a self-assembly (noncovalent) approach. The produced MIPs were validated with regard to the imprinting efficiency as media for LC and SPE. The retention behavior of several flavonoid compounds was studied using as stationary phases imprinted, control nonimprinted polymers, and commercial silica-based materials. MIPs were applied as materials for the selective SPE and preconcentration of the flavonoids from white and red wine, orange juice, and tea. The collected fractions were analyzed by high-pressure LC. MIP-SPE facilitated specific analyte isolation and effective sample clean-up. The results show that molecularly imprinted SPE can be a useful tool for the simple, selective, and cost-effective pretreatment of samples containing natural antioxidants.     

Low cross-linked molecularly imprinted monolithic column prepared in molecular crowding conditions

Molecular crowding is a new approach to promoting molecular imprinting more efficiently. In this work, this concept was applied to the preparation of low cross-linked imprinted polymers in the presence of an immobilised template for stabilizing binding sites and improving molecular recognition. An imprinted monolithic column was synthesized using a mixture of 2,4-diamino-6-methyl-1,3,5-triazine (template), 2,4-diamino-6-(methacryloyloxy) ethyl-1,3,5-triazine (polymerisable template), methacrylic acid, ethylene glycol dimethacrylate, and polystyrene (molecular crowding agent). Some polymerization factors, such as template-monomer molar ratio, the composition of the porogen and crosslinking density, on the imprinting effect of resulting MIP monolith were systematically investigated. The results indicated that the imprinted monolithic columns prepared in the presence of molecular crowding agent retained affinity and specificity for template even when prepared with a level of cross-linker as low as 9%. Moreover, a stoichiometric displacement model for retention was successfully applied to evaluate the interaction between the solute and the stationary phase. Compared with the low cross-linked MIP prepared by conventional polymerization, the molecular crowding-based low cross-linked monolithic MIPs showed higher selectivity. The results suggested that molecular crowding is a powerful strategy to increase the effect of molecular imprinting at a low level of crosslinker.     

基于银增强金标记物的阳极溶出伏安免疫分析用于补体第三成分的测定

分子印迹是制备对特定分子具有专一性结合能力的聚合物的技术,所制备的聚合物被称为分子印迹聚合物（Molecularly imprinted polymers,MIPs）,此类聚合物在分离提纯、模拟酶和传感器等方面均显示出广阔的应用前景,迄今,小分子化合物的印迹技术已经十分成熟。     

Synthesis and chromatographic evaluation of molecularly imprinted polymers prepared by the substructure approach for the class-selective recognition of glucuronides

Two series of molecularly imprinted polymers (MIPs) for the class-selective recognition of glucuronides have been prepared by using lipophilic substructures of the target analyte as template molecule and potent host monomers against oxyanions, that are expected to establish a strong stoichiometric interaction with the single carboxylic group of the template. The polymers were tested as stationary phases in liquid chromatography for specific recognition. A preliminary investigation of the imprinting properties of eleven MIPs was carried out, by comparing the retention time of the template and of structurally related compounds on the MIP column with that on the corresponding non-imprinted polymer (NIP). The two polymers showing the best performance were selected to further test cotinine, mycophenolic acid, testosterone and their respective glucuronides as model compounds. The high specificity obtained against glucuronides and the different chemical structure of the parent drug make the two MIPs class-selective imprinted receptors, also suitable for SPE application.     

The development of a semiautomated procedure for the synthesis and screening of a large group of molecularly imprinted polymers

A method for synthesis and evaluation of molecularly imprinted polymers (MIPs) on a semiautomated miniature scale is reported. This technique combines molecular imprinting with the combinatorial chemistry approach, allowing rapid screening and optimizations of libraries of MIPs. The polymers were prepared and evaluated in situ by rebinding utilizing powder dispensing and liquid handling systems. MIPs were prepared by a combinatorial approach using methacrylic acid (MAA), 4-vinylpyridine (4-VP), acrylamide, and styrene as functional monomers, and acetonitrile and toluene as porogenic solvents. A drug substance having aromatic, hydroxyl, -O-CONH2 functional groups was selected as the template molecule for this study. The MIP library results demonstrated that the polymer prepared with MAA as functional monomer shows the strongest binding affinity, and therefore, is preferred for the preparation of this particular template molecule. Due to the low consumption of reagents, and more importantly, the demonstrated ability of this method to effectively identify optimal imprinting conditions, this small-scale combinatorial protocol is well suited for fast and efficient screening and optimizations of MIPs.     

酚酞分子印迹聚合物的制备及特异吸附性能

以泻药酚酞为模板分子,4-乙烯基吡啶为功能单体制备了模板分子和功能单体不同比例的一系列酚酞分子印迹聚合物。利用扫描电镜对聚合物进行了表面形态分析,采用静态平衡实验法研究了聚合物对模板分子及其类似物的吸附行为和选择性识别能力。实验结果表明,所制备的分子印迹聚合物,吸附 3 h 后基本接近最大吸附量,其中模板分子、4-乙烯基吡啶和交联剂的摩尔比为 1∶6∶20的MIP2的印迹因子为 2.30,效果最佳。Scatchard 分析表明, 在所研究的浓度范围内,吸附过程存在两类结合位点,一类高亲和力结合位点的离解常数为Kd1= 0.63 mmol/L,最大表观结合量 Qmax1 = 25.4 umol/g,另一类低亲和力结合位点的离解常数为 Kd2 =3.5 mmol/L,最大表观结合量 Qmax2 = 61.9 umol/g,通过与酚酞类似物质在酚酞分子印迹聚合物上的吸附行为比较,表明对酚酞具有很好的选择性吸附。     

新型单分散血清白蛋白印迹微球的制备

以猪血清白蛋白（PSA）为模板,采用分级印迹方法,制备了新型单分散多孔蛋白质表面印迹微球．将PSA吸附在5gm粒径、1000A孔径的球形硅胶表面及孔内后,将甲基丙烯酰胺、甲基丙烯酸为功能单体、甲又双丙烯酰胺为交联剂的聚合物溶液,通过真空负压引入到硅胶孔内,并在室温下聚合24h．反应完成后,用3mol／L NH4HF2刻蚀硅胶,获得形状和结构与硅胶颗粒互补的PSA印迹聚合物微球．竞争吸附实验结果表明,在非模板蛋白质存在的情况下,实现印迹颗粒对模板蛋白的高选择性吸附,选择因子达到3．6,说明该印迹聚合物材料有望成为一种可以同生物抗体相媲美的新型亲和材料．