温敏性含氟两亲接枝共聚物的制备及胶束化行为

以聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)为大分子单体, 甲基丙烯酸六氟丁酯(HFMA)为含氟单体, N-异丙基丙烯酰胺(NIPAAm)为功能性单体, 采用大分子单体接枝共聚法, 制备了一种温敏性含氟两亲接枝共聚物P(NIPAAm-co-HFMA)-g-PEG. 利用FTIR, ¹H NMR, ¹⁹F NMR和GPC对共聚物的结构进行表征; 采用紫外-可见分光光度计测定了共聚物的低临界溶解温度(LCST)约为38.9 ℃, 高于人体正常的生理温度; 利用荧光探针技术测定了共聚物的临界胶束浓度(cmc), 结果表明, 当共聚物溶液温度高于LCST时, 其cmc明显变小; 利用激光光散射粒度仪(LLS)测定了共聚物胶束的水合粒径及其分布, 当温度达到LCST时, 胶束粒径明显变小, 温度过高时, 粒径又有所增大; 利用透射电子显微镜(TEM)研究了共聚物胶束的形貌, 结果表明, P(NIPAAm-co-HFMA)-g-PEG在水溶液中可自组装成球状胶束粒子, 随着温度的升高, 共聚物胶束由松散的核壳结构转变成更加紧凑的球状结构, 且粒径明显变小.     

磷酰胆碱基pH敏感性ABA型嵌段共聚物的合成与胶束化

采用氯化亚铜/2,2-联二吡啶催化体系, 2,5-二溴己二酸二乙酯为引发剂, 甲醇为溶剂运用希莱克技术, 利用原子转移自由基聚合(ATRP)方法合成了ABA型三嵌段共聚物PDEAEMA-b-PMPC-b-PDEAEMA. ¹H NMR和GPC(凝胶渗透色谱)对聚合物组成、结构及分子量进行了表征, 利用透光率、粘度测定研究了嵌段共聚物溶液的pH敏感性, 利用表面张力测定、荧光探针和透射电镜研究了嵌段共聚物胶束化作用, 确定了共聚物水溶液的临界胶束浓度(CMC). 结果表明所合成的ABA型三嵌段共聚物水溶液具有pH敏感性, 其临界相变pH 7～7.5. 调节溶液pH值可实现嵌段共聚物胶束化形成“花状”胶束, 并测定了其临界胶束浓度.     

聚丙烯酸接枝辛基酚聚氧乙烯醚的合成、表征和胶束化

通过自由基聚合, 丙烯酸(AA)与辛基酚聚氧乙烯醚丙烯酸酯活性大单体(C8PhEO10Ac)共聚,合成了以聚丙烯酸为主链、C8PhEO10Ac 为支链的水溶性两亲接枝共聚物(PAA-g-C8PhEO10Ac), 用凝胶渗透色谱(GPC)测定其相对数均分子质量为4.37×10⁴, 用FTIR和1H-NMR表征了共聚物的结构和组成, 共聚物分子中丙烯酸单体与活性大单体的摩尔比为9:1, 每个共聚物分子中平均约有32个C8PhEO10侧链. 用表面张力法、荧光探针法和透射电子显微镜对共聚物在水溶液中的自组装行为进行了初步研究, 结果表明, 共聚物分子在第一临界胶束浓度cmc1)和第二临界胶束浓度(cmc2)时都形成了球型胶束. 与cmc1时相比, cmc2时溶液表面张力进一步降低, 胶束内部极性进一步减小, 而且胶束粒径增大、结构紧密. 氯化钠的加入可使共聚物溶液的表面张力和胶束内部极性降低.     

微波辐射无皂乳液聚合制备荧光乳液纳米粒子及其性能研究

以苯乙烯(St)为主要单体,对苯乙烯磺酸钠(NaSS)和可聚合稀土荧光配合物(Eu(AA)(BA)_2Phen)为功能性单体,通过微波辐射无皂乳液聚合制备了Poly(St-NaSS-Eu(AA)(BA)_2Phen)共聚物荧光乳液纳米粒子.利用红外光谱对共聚物的结构进行了证实;通过透射电子显微镜和扫描电子显微镜观察了粒子的形态、结构及大小;利用激光光散射粒度仪测试了粒子的大小及分布;结果发现所制备的共聚物荧光乳液纳米粒子呈大小均一的球形形状,粒径大小约为35 nm;采用荧光分光光度计测试,发现共聚物纳米粒子在595 nm和619 nm处出现Eu~(3+)的特征发射光谱,具有良好的荧光效果.     

含氟两亲接枝共聚物的制备及其与牛血清蛋白作用的研究

用端基反应法合成了对乙烯基苄基的聚乙二醇大分子单体,将该大分子单体与甲基丙烯酸六氟丁酯共聚,合成了一种含氟两亲接枝共聚物.利用1H-NMR1、9F-NMR、GPC对大分子单体和两亲接枝共聚物进行了表征.表面张力法测定了两亲接枝共聚物的临界胶束浓度,发现随着共聚物中含氟链段含量的增加,其临界胶束浓度降低.采用荧光光谱研究了含氟两亲接枝共聚物与牛血清蛋白(BSA)的相互作用,结果表明由于含氟链段疏水力的作用,含氟两亲接枝共聚物能与牛血清蛋白发生相互作用使其荧光增强,随着含氟两亲接枝共聚物浓度和共聚物中含氟链段含量的增加,荧光增强幅度加大.通过透射电子显微镜(TEM)和激光光散射粒度仪(PCS)测试发现,当BSA加入到含氟两亲接枝共聚物的胶束溶液后,所得胶束的粒径和粒径分布变大,共聚物胶束由规整的实心核壳结构变为囊泡状核壳结构.     

温度/pH敏感性嵌段共聚物P(HEMA-co-DEAEMA)-b-PDEAM-b-P(DEAEMA-co-HEMA)的合成与性质研究

利用原子转移自由基聚合方法(ATRP)合成了组成递变的嵌段共聚物P(HEMA-co-DEAEMA)-b-PDEAM-b- P(DEAEMA-co-HEMA). 用FTIR, ¹H NMR和GPC技术表征了聚合物的组成、结构、分子量及其分布. 通过透光率测定、粘度、激光粒度分析和透射电镜研究了共聚物组成、温度及溶液pH对其溶液相行为和胶束化作用的影响. 结果表明: 所合成的嵌段共聚物具有温度和pH敏感性, 共聚物水溶液的低临界溶解温度(LCST)随HEMA量的增加而降低, 临界相变pH随HEMA量的增加而降低, 温度和pH诱导均可实现嵌段共聚物的胶束化. 控制HEMA量可以调控嵌段共聚物的LCST和pK_a.     

无探针紫外光谱法测定CTAB的第二临界胶束浓度

应用无探针的紫外吸收分光光谱法(UV)测定了十六烷基三甲基溴化铵(CTAB)溶液的第一、第二临界胶束浓度(CMC), 并用¹H NMR谱和动态光散射的实验方法检测到了两个浓度时溶液中聚集体的转变, 从而验证了无探针紫外光谱法测定CTAB溶液第二临界胶束浓度的可行性. 此外, 我们还利用紫外光谱法研究了CTAB/KBr体系, 证实KBr可诱导CTAB形成蠕虫状胶束.     

2-羟基-3-异丙氧基丙基羟乙基纤维素的合成及其自组装行为的研究

通过醚化反应, 将疏水性试剂异丙基缩水甘油醚(IPGE), 接枝到以羟乙基纤维素为亲水性骨架的主链上, 合成了具有温度响应性的2-羟基-3-异丙氧基丙基羟乙基纤维素(HIPEC), 运用核磁共振(¹H NMR、¹³C NMR、2D HSQC NMR)对HIPEC进行结构表征, 其最低临界溶解温度(LCST)可通过改变疏水侧链的摩尔取代度(MS)和盐浓度来调节. 通过荧光光谱仪、动态光散射(DLS)、共聚焦荧光显微镜(CLSM)研究了HIPEC在水溶液中自组装行为及Nile Red在HIPEC胶束中的增溶行为和温度控制释放行为, 结果表明, HIPEC在溶液中自组装形成胶束, 并且胶束粒径随着温度的升高而增大; 在温度高于LCST时, Nile Red从HIPEC胶束中缓慢释放, 并且可通过改变温度控制Nile Red的释放过程.     

光/温度双响应三嵌段共聚物的合成及溶液自组装行为

以双官能团聚乙二醇(Br-PEO-Br)为引发剂, 利用原子转移自由基聚合(ATRP)制得了含偶氮苯(AZO)和N-异丙基丙烯酰胺(NIPAM)的两亲性三嵌段共聚物P(AZO₉-co-NIPAM₉)-b-PEO₄₈-b-P(AZO₉-co-NIPAM₉), 并通过核磁共振(¹H NMR)和凝胶渗透色谱(GPC)对产物进行了表征. 该共聚物能够在溶液中自组装形成纳米胶束, 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了胶束的形貌、粒径及其在光或温度刺激下的响应行为. 结果表明, 该三嵌段共聚物胶束显现出我们以往报道的二嵌段共聚物所不具有的光释放行为: 包覆有尼罗红的胶束在多次紫外-可见光循环照射之后, 荧光强度和初始状态相比下降了大约40%, 说明尼罗红在此过程中逐渐被释放. 胶束的尺寸随着温度的升高而逐渐缩小.     

疏水缔合聚丙烯酰胺在表面活性单体胶束溶液中的制备及其流变特性

配制了表面活性单体2-丙烯酰胺基十二烷磺酸钠(NaAMC12S)与十二烷基硫酸钠(SDS)的胶束溶液,分别测定了强疏水单体N-正十二烷基丙烯酰胺(C12AM)在两种胶束溶液中的增溶性能;在此基础上,于两种胶束溶液中分别进行了丙烯酰胺(AM)与C12AM的胶束共聚合,制备了疏水缔合聚丙烯酰胺(HAPAM),它们分别为二元共聚物C12AM/AM与三元共聚物C12AM/NaAMC12S/AM;测定了两种共聚物的红外光谱;采用荧光探针法与表观粘度法重点研究了它们的疏水缔合性与流变性能.结果表明,在表面活性单体NaAMC12S的胶束溶液中,可顺利地实现AM与疏水单体的胶束共聚合,由于表面活性单体也参与了共聚合,故制得的产物为三元共聚物C12AM/NaAMC12S/AM;与在SDS胶束溶液中制备的二元共聚物C12AM/AM相比,前者的疏水缔合性更强,其强疏水缔合性以强疏水单体C12AM的贡献为主,以表面活性单体NaAMC12S的贡献为辅.     

无皂乳液聚合制备含铕荧光共聚物乳液的研究及其表征

以丙烯酸(AA)为第一配体、邻菲罗啉(Phen)为第二配体、Eu3+为中心离子,合成了一种可聚合的稀土铕配合物.以配合物单体、甲基丙烯酸甲酯、丙烯酰胺和对苯乙烯磺酸钠为共聚单体,通过无皂乳液聚合的方法,制备了含铕荧光共聚物乳液.采用红外光谱对共聚物的结构进行了表征,并探讨了配合物单体含量对共聚物乳液性能的影响.透射电子显微镜(TEM)和激光光散射粒度仪(PCS)测试结果表明,共聚物乳液形成了相对均一的球状结构,但随着配合物单体含量增加,共聚物微球粒径逐渐增大、分散性变差.采用荧光分光光度计测试了共聚物乳液的荧光性能,在594和619 nm处出现Eu3+的特征发射光谱,且荧光强度随着配合物单体含量增加而增强.     

Cationic Lanthanide Luminescent Copolymer: Design,Synthesis and Interaction with DNA

Polymerizable rare earth complex Eu(AA)₃Phen was synthesized by complexion of europium ion, acrylic acid (AA), and 1,10-phenanthroline (Phen). The structure and fluorescence properties of the complex were studied by elemental analysis, ¹H-NMR spectroscopy, and fluorescence spectroscopy. Eu-containing copolymer poly(PEGMA-co-MMA-co-METAC-co-Eu(AA)₃Phen) (PPMMEu) was then synthesized by free radical copolymerization of Eu(AA)₃Phen and other functional monomers including poly(ethylene glycol) methyl ether methacrylate (PEGMA) and [2-(Methacryloyloxy) ethyl] trimethylammonium chloride (METAC). ¹H-NMR spectroscopy and fluorescence spectroscopy were used to characterize the copolymer and the interactions between the copolymer and DNA was investigated by TEM, fluorescence spectroscopy, and agarose gel electrophoresis. The desired luminescent cationic copolymer was successfully obtained. The copolymer can form micelles in water solution and can efficiently bind to DNA molecules through electrostatic interaction. The results suggest the potential use of PPMMEu in bioprobes and gene vectors.     

Synthesis and characterization of fluorescent copolymer containing rare earth metal complex and its interaction with DNA

A complex of Eu³⁺, acrylic acid (AA), and 1, 10‐phenanthroline (Phen) was synthesized. The structure and fluorescence of Eu(AA)₃Phen was characterized with elemental analysis, FTIR, ¹H NMR, and fluorescence spectroscopy. A novel copolymer containing rare earth complex, poly(PEGMA‐co‐NIPAm‐co‐Eu(AA)3Phen) (PPNEu), was prepared by free radical copolymerization in methanol with azodiisobutyronitrile as initiator. ¹H NMR, fluorescence spectroscopy, UV‐vis spectroscopy, and TEM were used to characterize this copolymer. The interaction of PPNEu with deoxyribonucleic acid (DNA) was studied by fluorescence spectroscopy, UV‐vis spectroscopy and agarose gel electrophoresis. The results of fluorescence, UV‐vis absorption, and agarose electrophoresis indicated that the PPNEu could interact with DNA in an electrostatic bonding mode. The TEM observation showed that the PPNEu could form spherical micelles in water solution small than 100 nm; the efficient complexation of PPNEu with DNA occurred. These results suggested the potential of the PPNEu as gene detective reagent and gene delivery carrier. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

新型两亲性含糖嵌段聚合物的合成与自组装

以β-环糊精(β-CD)和2-乙基-2-噁唑啉(EtOz)为原料, 通过活性端基化学偶联法制备了乙酰麦芽七糖/聚(2-乙基-2-噁唑啉)两嵌段聚合物(AcMH-b-PEtOz), 借助核磁共振氢谱、红外光谱和凝胶渗透色谱等手段证实了产物的化学结构. 采用核磁共振氢谱、荧光光谱、透射电子显微镜、动态光散射及紫外-可见分光光度等方法探讨了产物在水溶液中的自组装行为. 结果表明, 所得嵌段聚合物直接溶于水后可通过自组装形成纳米球形“核-壳”结构胶束, 同时具有温度响应性. 所得聚合物的临界胶束浓度(cmc)为4~7 mg/L, 平均粒径(d)为83~115 nm, 临界相转变温度(LCST)为49~64 ℃, 并且均可通过PEtOz的链长进行调控.     

聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物的合成及其胶束制备

以聚丙烯酰胺(PAM)为大分子引发剂, 采用开环聚合方法, 在N,N-二甲基甲酰胺(DMF)中引发L-谷氨酸苄酯环内酸酐(BLG-NCA)聚合合成了两亲性聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物(PAM-g-BLG), 采用IR, 1H NMR和GPC方法对共聚物结构进行了表征; 用芘作荧光探针, 研究了共聚物胶束的形成及其临界胶束浓度(cmc), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, PAM能够引发BLG-NCA开环聚合得到接枝共聚物, 在一定条件下接枝共聚物能够形成球形的稳定胶束, cmc值和胶束粒径随着共聚物中疏水性聚L-谷氨酸苄酯(PBLG)链段含量的增加而减小.     

Soluble complexes of sodium poly(isoprene-b-methacrylate) micelles with cationic surfactants in aqueous media

Water-soluble complexes between sodium poly(isoprene-b-methacrylate) (NaIMA) amphiphilic block copolymer micelles and two cationic surfactants with different hydrophobic tail lengths, namely, dodecyltrimethylammonium bromide (DTMAB) and octyltrimethylammonium bromide (OTMAB), were prepared by mixing individual aqueous solutions of block copolymers and surfactants. The complexes were characterized in terms of size, overall charge, and micropolarity by dynamic light scattering, zeta-potential measurements, and fluorescence spectroscopy. Properties of the systems were investigated as a function of surfactant concentration and surfactant type and state in the initial solutions, as well as temperature. Experiments reveal surfactant complexation at the coronal sodium poly(methacrylate) (NaMA) chains, followed by an increase in mass and a decrease in size of the micelles. Complexation of individual surfactant micelles was observed when the DTMAB concentration in the starting solutions was higher than the surfactant cmc. The complexes show a temperature dependence of their dimension due to the hydrophobic effect.     

Synthesis and properties of fluorine‐containing amphiphilic graft copolymer P(HFMA)‐g‐P(SPEG)

A series of amphiphilic graft copolymers P(HFMA)‐g‐P(SPEG) comprising poly(hexafluorobutyl methacrylate) (PHFMA) backbones and poly(ethylene glycol) (PEG) side chains were synthesized by copolymerization of HFMA and SPEG macromonomer with the p‐vinylbenzyl end group. The SPEG macromonomer was synthesized by reacting Methoxy poly(ethylene glycol) (MPEG) with p‐chloromethylstyrene in THF in the presence of NaH. The macromonomer and amphiphilic graft copolymer were characterized by FTIR, ¹H NMR, ¹⁹F NMR, and gel permeation chromatography (GPC). The critical micelle concentration (CMC) of the amphiphilic graft copolymer was measured by surface tension technique. The results showed that the CMC decreased with increasing HFMA contents in the graft copolymers. The interaction between P(HFMA)‐g‐P(SPEG) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy, transmission electron microscopy (TEM), and photon correlation spectroscopy (PCS). The fluorescence spectrum showed that the fluorescence intensity of BSA increased with increasing content of HFMA in P(HFMA)‐g‐P(SPEG) and concentration of P(HFMA)‐g‐P(SPEG) in the P(HFMA)‐g‐P(SPEG)/BSA solution. TEM micrographs showed that P(HFMA)‐g‐P(SPEG) mainly formed core‐shell structure micelles. When BSA was added, the micelles changed from a core‐shell structure into a worm‐like, vesicle‐like and hollow‐like structure with different initial concentrations of the copolymer. The size distribution of the micelles increased proving that the copolymer micelles encapsulated the bovine serum albumin. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4895–4907, 2009     

催化链转移聚合制备接枝型两亲共聚物及其溶液性质研究

采用大分子单体法制备接枝型两亲共聚物, 通过表面张力仪、偏光显微镜、旋转流变仪和小角X射线衍射研究了两亲共聚物在水溶液中的聚集行为及其相结构. 首先末端带有可聚合双键的聚甲基丙烯酸叔丁酯大分子单体(PtBMA Macromonomer)通过催化链转移聚合法制备, 所用到的催化链转移剂为二水合双(二氟化硼苯二酮肟)合钴(II) (COPhBF). 然后将所得到的大分子单体与丙烯酸正丁酯(BA)进行自由基共聚得到接枝共聚物PBA-g-PtBMA, PBA-g-PtBMA中PtBMA的侧链部分在酸性条件下定量水解成聚甲基丙烯酸(PMAA)并用NaOH中和得到主链疏水侧链亲水的接枝型两亲共聚物PBA-g-P(MAA^－Na^＋). 用Wilhelmy吊片法研究了不同浓度的两亲共聚物水溶液的表面张力, 发现其行为与小分子表面活性剂不同. 同时用动态光散射法测量了两亲共聚物水溶液中聚集体的粒度, 发现在研究的浓度范围内(0.02～10 g/L)聚集体都存在两个粒度分布峰(约30和300 nm). 浓溶液(w＝37.5%)的偏光显微照片呈现层状液晶的特征图案, 而流变研究表明此时体系具有明显的粘弹性, 说明体系形成了层状液晶. 并且用小角度X射线衍射测定了层状液晶的层间距, 约为12.6 nm.