Bis(2-mercaptobenzoxazolato)mercury(II) and bis(2-pyridinethiolato)mercury(II) complexes as carriers for thiocyanate selective electrodes

Highly selective poly(vinyl chloride) (PVC) membrane electrodes based on bis(2-mercaptobenzoxazolato)mercury(II) [Hg(MBO)₂] and bis(2-pyridinethiolato)mercury(II) [Hg(PT)₂] complexes as new carriers for thiocyanate-selective electrodes are reported. The electrodes were prepared by coating the membrane solution containing PVC, plasticizer, carriers and additives on the surface of graphite electrodes. Influence of the membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. Both sensors exhibited Nernstian responses towards thiocyanate over a wide concentration range of 1×10⁻⁶ to 0.1 M, with slopes of 60.6±0.8 and 57.5±1.2 mV per decade of thiocyanate concentration for Hg(MBO)₂ and Hg(PT)₂ carriers, respectively, over a wide pH range of 3-11. The limit of detection for both electrodes was ∼6×10⁻⁷ M. The sensors have response times of ≤5 s and can be used for at least 2 months without any considerable divergence in their potential response. The proposed electrodes show fairly good discrimination of thiocyanate over several inorganic and organic anions. The electrodes were successfully applied to direct determination of thiocyanate in saliva and as indicator electrodes in precipitation titrations.     

Ruthenium(II) and iron(II) complexes of N-pyridyl substituted imidazolin-2-ylidenes

N-mesityl-N′-pyridyl-imidazolium chloride 1a and the corresponding bromide salt 1b have been deprotonated with NaH in THF giving the free N-heterocyclic carbene N-mesityl-N′-pyridyl-imidazolin-2-ylidene 2 in 80% yield (starting from 1a). Imidazolium salt 1a reacts with RuCl₃ · xH₂O to give a racemic mixture of dinuclear di-μ-chloro bridged ruthenium complexes [(κ²-2)₂Ru(μ-Cl)₂Ru(κ²-2)₂]²⁺ [3a]²⁺. The carbene carbon atoms as well as the halides are arranged in cis-positions to each other whereas the nitrogen atoms adopt a trans-configuration. The di-μ-bromo bridged derivative [(κ²-2)₂Ru(μ-Br)₂Ru(κ²-2)₂]²⁺ [3b]²⁺ was obtained from RuCl₃ · xH₂O and 1b. The bridging halide ligands can be removed by the reaction with silver or sodium salts of bidentate Lewis acids. Complex [3a]²⁺ reacts with silver pyridylcarboxylate to give a racemic mixture of the mononuclear complex [4]⁺. Reaction of [3a]²⁺ with the sodium salt of l-proline resulted in a diastereomeric mixture of complexes [5]⁺. The free N-heterocyclic carbene 2 reacts with [FeCl₂(PPh₃)₂] to give after anion exchange with NaBPh₄ cis/cis/trans coordinated [Fe(κ²-2)₂(MeCN)₂](BPh₄)₂ [6](BPh₄)₂. The molecular structures of [3b](PF₆)₂, [4]PF₆ and [6](BPh₄)₂ · H₂O are reported.     

Thermal characterization of mercury(II) bis(dialkyldithiocarbamate) complexes

Summary Solid-state M-4-MeO-Bz compounds, where M stands for bivalent Mn, Co, Ni, Cu and Zn and 4-MeO-Bz is 4-methoxybenzoate, have been synthesized. Simultaneous thermogravimetry-differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), X-ray powder diffractometry, infrared spectroscopy, elemental analysis and complexometry were used to characterize and to study the thermal behaviour of these compounds. The results led to have information about the composition, dehydration, thermal stability and thermal decomposition of the isolated compounds.     

Silver(I) complexes of bis[2-(diphenylphosphino)phenyl] ether

The reaction of AgOTf in dichloromethane with bis(2-(diphenylphosphino)phenyl) ether (DPEphos) in an equimolar ratio afforded a dinuclear complex [Ag₂(κ²-P,P′-DPEphos)₂(μ-OTf)₂] (1), whereas the similar reaction in a 1:2 molar ratio resulted in the formation of a bis-chelating complex [Ag(κ²-P,P′-DPEphos)₂][OTf] (2). The silver(I) complex 1 was obtained as a dimer, in which two silver atoms are bridged by two triflate groups to form three adjacent eight-membered spirocyclic rings. The mixed-ligand complex [Ag(κ²-P,P′-DPEphos)(2,2′-bpy)][OTf] (3) was obtained in the reaction of 1 in dichloromethane with 2,2′-bipyridine. The crystal structures of complexes 1–3 were determined by single crystal X-ray analyses.     

Rhodanine complexes of zinc(II), cadmium(II), mercury(II) and mercury(I)

The following rhodanine (HRd) complexes of zinc(II), cadmium(II), mercury(II) and mercury(I) have been prepared and studied by i.r. spectra: M(Rd)₂(NH₃)₂ (MZn, Cd) with a 4N,2S-six-coordination; Zn₃(Rd)₄(CH₃COO)(OH), Cd₂(Rd)₃(HRd)₃(CH₃COO)(H₂O) in which the acetato anion is bicoordinated; Hg(Rd)₂, Hg₂(HRd)₃(BF₄)₂·0.5(HAc or EtOH), Hg(HRd)(CF₃COO)₂·H₂O in which both the ligands HRd and Rd⁻ are S,N-bonded to the metal; Hg(HRd)₂Cl₂, Hg(HRd)₄(ClO₄)₂ in which the ligand HRd is S-bonded; Hg₃(Rd)₃ · NH₃ with S,N-bonded Rd⁻ ligand.     

Trimetallic complexes of ferrocenylene bis[mercury(II)thiocyanate]

[Fe(C₅H₄HgSCN)₂M(NCS)₂] complexes were prepared by reacting ferrocenylene bis[mercury(II)thiocyanate] with M(NCS)₂ [M = Co(II), Ni(II), Cu(II) or Zn(II)]. Their adducts of general formula [Fe(C₅H₄HgSCN)₂M(NCS)₂L] were prepared by reacting ferrocenylene bis[mercury(II)thiocyanate] and M(NCS)₂L₂ (L = morph or en). All compounds were characterized by elemental analyses, and molar-conductance, IR and electronic spectral studies. These studies indicated that the geometry around the metal is tetrahedral for cobalt and zinc, and octahedral for nickel and copper. Both types of complex have a thiocyanate-bridged structure.     

Dinuclear silver(I)-N-heterocyclic carbene complexes of N-allyl substituted (benz)imidazol-2-ylidenes with pyridine spacers: synthesis,crystal structures,nuclease and antibacterial studies

Transition Metal Chemistry - The synthesis, structures and antibacterial studies of silver complexes of N-heterocyclic carbene (NHC) ligands are reported. The NHC precursors,...     

Zinc (II), cadmium (II) and mercury (II) complexes of 2-methyl-benzothiazole

The following zinc (II), cadmium (II) and mercury (II) complexes of 2-methyl-benzothiazole (2Mebt=L) have been prepared and studied by conductometric methods, i.r. and Raman spectra: ML₂ (M = Zn, X = Cl, I, NO₃; M = Cd, X = NO₃, ClO₄; M = Hg, X = NO₃), ML_1.5X₂ (M = Zn, X = ClO₄ (H₂O); M = Hg, X = ClO₄) and MLX₂ (M = Cd and Hg, X = Cl, Br, I). The ligand is N-bonded when acting as monodentate and N,S-bonded as bridging ligand. The halide, nitrate and perchlorate ions are coordinated.     

Zinc (II), cadmium (II) and mercury (II) complexes of 2-methyl-benzoxazole

The following zinc (II), cadmium (II) and mercury (II) complexes of 2-methyl-benzoxazole (L) have been prepared and studied by conductometric and i.r. methods: MLX₂ (MCd, XCl, Br; MHg, XCl), HgL_1.5X₂ (XBr, ClO₄), ML₂X₂ (MZn, XCl, Br, I, NO₃; MCd, Hg, XI, NO₃), ZnL₃(ClO₄)₂·2H₂O, CdL₃(ClO₄)₂·3H₂O. The frequency decrease of the ligand bands at 1614 and 1573 cm⁻¹ having a ν(CN) and the increase of the ligand band at 918 cm⁻¹ having a ν(CO) contribution indicate that in the complexes the ligand is N-bonded to the metal.     

Synthesis and structure of silyl-substituted imidazol-2-ylidenes and their precursors

Previously unknown heterocyclic carbenes and their precursors containing a silicon atom in the side chain were prepared. Their structures were studied by multinuclear ¹H, ¹³C, ¹⁵N, and ²⁹Si NMR spectroscopy.     

Zinc(II), cadmium(II) and mercury(II) complexes of 2-aminobenzothiazole

Zinc, cadmium and mercury(II) complexes of 2-aminobenzothiazole (HL) have been prepared and studied by conductometric, i.r. and Raman methods: MX₂·2HL (M  Zn, X  Cl, Br, I, NO₃; M  Cd, X  I), MX₂·HL (M  Cd, X  Cl, Br, NO₃(3H₂O); M  Hg, X  Cl, Br, I), M(ClO₄)₂; 1.5 HL (M  Zn(4H₂O), Hg), Cd(ClO₄)₂·3HL·4H₂O, HgNO₃·L. A comparison of the i.r. spectra of the complexes with those of the ligand, its deuterated DL and HL · HBr derivatives excludes a coordination of the ligand through the amino nitrogen atom and supports its coordination through the ring nitrogen atom. The zinc halide complexes have a tetrahedral coordination. The nitrate and perchlorate anions are coordinated.     

Silver(I) complexes of N-thiophosphorylated bis(iminophosphorane) ligands: from monomers to polymers

Treatment of diphosphines Ph(2)P(CH2)nPPh2 (n = 1, 2, 4, 6) and [Fe(eta5-C(5)H(4)PR'2)2] (R' = Ph, (i)Pr) with a two-fold excess of (RO)2P(=S)N3 (R = Et, Ph) results in the high-yield formation of the N-thiophosphorylated bis(iminophosphorane) derivatives (CH2)n[P{=NP(=S)(OR)2}Ph2]2 and Fe(eta5-C(5)H(4)[P{=NP(=S)(OR)2}R'2])2, respectively. The reactions of these ligands with AgSbF(6) in a 1 : 1 molar ratio have been investigated. The resulting silver(I) complexes, derived from the selective coordination of the P=S units, have been characterized by IR, NMR and MS (FAB) spectroscopy and, in selected cases, by X-ray crystallography. Monomeric, dimeric and polymeric solid-state structures, depending on the nature of the ligand backbone, have been found.     

Copper(II) complexes with imidazol-4-yl derivatives of 2-imidazoline nitroxides

Cu(hfac)₂LH, Cu(hfac)₂L¹H, Cu(hfac)(CF₃COO)LH, Cu(LH)₂(NO₃)₂, and Cu(L¹H)₂(NO₃)₂, where LH and L¹H are nitronyl- and iminonitroxides, respectively, containing an imidazol-4-yl substituent in the side chain have been synthesized. In the solid state, the molecules are linked by intermolecular NH⋯O hydrogen bonds, leading to the formation of dimers, bands, or polymer layers. The antiferromagnetic exchange interactions between the odd electrons of the paramagnetic centers are concentrated in the Cu(II)-coordinated nitroxide exchange clusters. The energies of these interactions are between −154 and −350 cm⁻¹.     

Triazene formation via reaction of imidazol-2-ylidenes with azides

Treatment of N-heterocyclic carbenes (as their free carbenes or generated in situ) with alkyl, aryl, acyl or tosyl azides afforded the respective substituted triazenes in excellent yields.     

Silver(I) and gold(I) complexes of rhodanine

Summary Some rhodanine (HL) complexes of silver(I) and gold(1) have been prepared and studied by conductivity measurements and by i.r. spectroscopy. Structures for the complexes are proposed.     

Silver(I) complexes of thiourea

Ag^I complexes of thiourea (tu) having the general formula Ag(tu) _x NO₃ (x = 1–4) have been prepared and characterized by elemental analyses, i.r. and n.m.r. (¹H, ¹³C, ¹⁵N and ¹⁰⁷Ag) spectroscopy. Separate i.r. bands were observed for terminal and bridging tu ligands in the complexes. The Ag(tu)NO₃ complex is assumed to be polymeric with all tu groups in the bridging mode. A consistent upfield shift in the ¹³C-n.m.r. chemical shift is observed as the number of tu groups attached to Ag^I increases, whereas the opposite trend is observed for ¹H, ¹⁵N and ¹⁰⁷Ag chemical shifts.     

Novel neutral octanuclear copper(I) complexes stabilized by pyridine linked bis(pyrazolate) ligands

Two novel, neutral, octanuclear copper(I) complexes displaying twisted-boat Cu(8) conformations and short Cu-Cu interactions have been synthesized from hydrothermal reactions; the complexes show unusual multiple band emissions.     

New N-heterocyclic carbene mercury(II) and silver(I) complexes

The complexes [1-(9-anthracenylmethyl)-3-octylimy]₂Hg[HgCl₄] (2a) (imy = imidazol-2-ylidene) and [1-(9-anthracenylmethyl)-3-butylbimy]₂AgPF₆ (2b) (bimy = benzimidazol-2-ylidene) have been prepared and characterized. Crystal packing of complex 2a revealed that 1D polymeric chains are formed by [1-(9-anthracenylmethyl)-3-octylimy]Hg and [HgCl₄]²⁻ through weak Hg…Cl bonds. The packing diagram of 2b showed that 1D supramolecular chains are formed by both benzimidazole ring head to tail π–π stacking interactions and anthracene ring face-to-face π–π stacking interactions.     

Zinc(II), cadmium(II) and mercury(II) halide pyrrolidine-2-selone complexes

Summary Reaction of zinc(II), cadmium(II) and mercury(II) halides with Pyrrolidine-2-selone yields complexes of general formula ML₂X₂ (X = Cl, Br or I) which are monomeric, tetrahedral and Se-bonded to the metals. The comparison of their i.r. spectra with the spectrum of the free ligand confirms that the band at 1005 cm^–1 in Pyrrolidine-2-selone arises predominantly from the C=Se stretching vibration. The metalhalogen absorptions above 200 cm^–1 are identified.This work was supported by the National Research Council (C.N.R.) of Italy.