Optimal spare ordering policy for preventive replacement under cost effectiveness criterion

This paper presents a spare ordering policy for preventive replacement with age-dependent minimal repair and salvage value consideration. The spare unit for replacement is available only by order and the lead-time for delivering the spare due to regular or expedited ordering follows general distributions. To analyze the ordering policy, the failure process is modelled by a non-homogeneous Poisson process. By introducing the costs due to ordering, repairs, replacements and downtime, as well as the salvage value of an un-failed system, the expected cost effectiveness in the long run are derived as a criterion of optimality. It is shown, under certain conditions, there exists a finite and unique optimum ordering time which maximizes the expected cost effectiveness. Finally, numerical examples are given for illustration.     

Optimal spare ordering policy under a rebate warranty

This paper develops, from the customer’s perspective, the optimal spare ordering policy for a non-repairable product with a limited-duration lifetime and under a rebate warranty. The spare unit for replacement is available only by order and the lead time for delivery follows a specified probability distribution. Through evaluation of gains due to the rebate and the costs due to ordering, shortage, and holding, we derive the expected cost per unit time and cost effectiveness in the long run and examine the optimal ordering time by minimizing or maximizing these cost expressions. We show that there exists a unique optimum solution under mild assumptions. We provide a numerical example and illustrate sensitivity analysis.     

Optimal replacement model with age-dependent failure type based on a cumulative repair-cost limit policy

This paper presents a replacement model with age-dependent failure type based on a cumulative repair-cost limit policy, whose concept uses the information of all repair costs to decide whether the system is repaired or replaced. As failures occur, the system experiences one of the two types of failures: a type-I failure (minor), rectified by a minimal repair; or a type-II failure (catastrophic) that calls for a replacement. A critical type-I failure means a minor failure at which the accumulated repair cost exceeds the pre-determined limit for the first time. The system is replaced at the nth type-I failure, or at a critical type-I failure, or at first type-II failure, whichever occurs first. The optimal number of minimal repairs before replacement which minimizes the mean cost rate is derived and studied in terms of its existence and uniqueness. Several classical models in maintenance literature are special cases of our model.     

Optimal Replacement Policy for a General Model with Imperfect Repair

A general model is considered which incorporates imperfect repair and repair cost which depends on time and on the number of repairs in the cycle. This model is an extension of models examined previously in the literature. The objective of this paper is to find the optimal replacement policy and compare it with the replacement policies considered earlier for some variants of this model. The form of the optimal replacement policy is found in the general case and the expected average cost per unit time is derived in two special cases. Numerical examples show that the optimal policy is considerably better than the optimal periodic policy. This paper generalizes and unifies previous research in the area.     

A production planning model for an unreliable production facility: Case of finite horizon and single demand

We study a two-level inventory system that is subject to failures and repairs. The objective is to minimize the expected total cost so as to determine the production plan for a single quantity demand. The expected total cost consists of the inventory carrying costs for finished and unfinished items, the backlog cost for not meeting the demand due-date, and the planning costs associated with the ordering schedule of unfinished items. The production plan consists of the optimal number of lot sizes, the optimal size for each lot, the optimal ordering schedule for unfinished items, and the optimal due-date to be assigned to the demand. To gain insight, we solve special cases and use their results to device an efficient solution approach for the main model. The models are solved to optimality and the solution is either obtained in closed form or through very efficient algorithms.     

Preventive maintenance for homogeneous and heterogeneous systems

We consider optimal preventive maintenance for homogeneous and heterogeneous systems with major (critical) and minor (noncritical) failures. A major failure results in a replacement of a failed system, whereas minor failures can be minimally instantaneously repaired. Distinct from the homogeneous case, where the process of minimal repairs is the Poisson process, the process of minimal repairs in the heterogeneous case is the mixed Poisson process that does not possess the memoryless property. This enables considering the number of minimal repairs as the decision parameter for the corresponding optimal preventive maintenance policy. The proposed approach is theoretically justified, and the detailed illustrative numerical examples are presented.     

Optimally maintaining a Markovian deteriorating system with limited imperfect repairs

We consider the problem of optimally maintaining a periodically inspected system that deteriorates according to a discrete-time Markov process and has a limit on the number of repairs that can be performed before it must be replaced. After each inspection, a decision maker must decide whether to repair the system, replace it with a new one, or leave it operating until the next inspection, where each repair makes the system more susceptible to future deterioration. If the system is found to be failed at an inspection, then it must be either repaired or replaced with a new one at an additional penalty cost. The objective is to minimize the total expected discounted cost due to operation, inspection, maintenance, replacement and failure. We formulate an infinite-horizon Markov decision process model and derive key structural properties of the resulting optimal cost function that are sufficient to establish the existence of an optimal threshold-type policy with respect to the system’s deterioration level and cumulative number of repairs. We also explore the sensitivity of the optimal policy to inspection, repair and replacement costs. Numerical examples are presented to illustrate the structure and the sensitivity of the optimal policy.     

A general age-replacement model with minimal repair under renewing free-replacement warranty

A general age-replacement model in which incorporates minimal repair, planned and unplanned replacement, is considered in this paper for products under a renewing free-replacement warranty policy. For both warranted and non-warranted products, cost models from the user’s perspective are developed, and the corresponding optimal replacement ages are derived such that the long-run expected cost rate is minimized. The impacts of a product warranty on the optimal replacement model are investigated analytically. Furthermore, we show that the optimal replacement age for a warranted product is closer to the end of the warranty period than for a non-warranted product. Finally, numerical examples are given for illustration.     

Replacement Policies under Minimal Repair

In many situations where system failures occur the concept of ‘minimal repair’ is important. A minimal repair occurs when the failed system is not treated so as to return it to ‘as new’ condition but is instead returned to the average condition for a working system of its age. Examples include complex systems where the repair or replacement of one component does not materially affect the condition of the whole system.For a system with decreasing reliability it will become increasingly expensive to maintain operation by minimal repairs, and the question then arises as to when the entire system should be replaced. We consider cases where the failure distribution can be modelled by the Weibull distribution. Two policies have been suggested for this case. One is to replace at a fixed time and the other is to replace at a fixed number of failures. We consider a third policy, to replace at the next failure after a fixed time, and show that it is optimal.Expressions to decide the replacement point and the cost of this policy are derived. Unfortunately these do not give rise to explicit representations, and so they are used to provide extensive numerical comparisons of the policies in a search for effective explicit approximations. Conclusions are drawn from these comparisons regarding the relative effectiveness of the policies and approximations.     

Optimal age-replacement model with age-dependent type of failure and random lead time based on a cumulative repair-cost limit policy

In this paper, we consider an age-replacement model with minimal repair based on a cumulative repair cost limit and random lead time for replacement delivery. A cumulative repair cost limit policy uses information about a system’s entire repair cost history to decide whether the system is repaired or replaced; a random lead time models delay in delivery of a replacement once it is ordered. A general cost model is developed for the average cost per unit time based on the stochastic behavior of the assumed system, reflecting the costs of both storing a spare and of system downtime. The optimal age for preventive replacement minimizing that cost rate is derived, its existence and uniqueness is shown, and structural properties are presented. Various special cases are included, and a numerical example is given for illustration. Because the framework and analysis are general, the proposed model extends several existing results.     

具有位相型随机补货提前期的PH退化可修系统及其最优更换策略

将几何过程与PH分布相结合, 讨论一个带有位相型随机补货提前期的PH退化可修系统.通过建立最小生成元$Q$矩阵,获得了系统在稳态情形下的状态概率分布向量及其数值解.根据上述研究结果同时也得到了系统的几个重要可靠性指标. 进一步地,还考虑了基于部件故障次数的订购策略和更换策略,导出系统单位时间平均运行成本的解析表达式并给出一个确定最优$N$策略的数值算例.     

Some results for repairable systems with minimal repairs

In this paper, we consider a repairable system with minimal repairs whose number of repairs is a positive random variable with a given probability vector. Some preservation theorems and aging properties of repairable systems are established. Under the condition that at time t the system is working, a new random variable for the residual lifetime of the system is proposed. Some stochastic ordering results among the lifetimes and residual lifetimes of two systems are obtained. Similar results for coherent systems with independent components and exchangeable components were obtained in the previous literature. Copyright © 2013 John Wiley & Sons, Ltd.     

A multi-objective approach for solving a replacement policy problem for equipment subject to imperfect repairs

This paper proposes a multi-objective approach to model a replacement policy problem applicable to equipment with a predetermined period of use (a planning horizon), which may undergo critical and non-critical failures. Corrective replacements and imperfect repairs are taken to restore the system to operation respectively when critical and non-critical failures occur. Generalized Renewal Process (GRP) is used to model imperfect repairs. The proposed model supports decisions on preventive replacement intervals and the number of spare parts purchased at the beginning of the planning horizon. A Multi-Objective Genetic Algorithm (MOGA) coupled with discrete event simulation (DES) is proposed to provide a set of solutions (Pareto-optimum set) committed to the different objectives of a maintenance manager in the face of a replacement policy problem, that is, maintenance cost, rate of occurrence of failures, unavailability, and investment on spare parts. The proposed MOGA is validated by an application example against the results obtained via the exhaustive approach. Moreover, examples are presented to evaluate the behavior of objective functions on Pareto set (trade-off analysis) and the impact of the repair effectiveness on the decision making.     

Inventory models with minimal service level constraints

This paper investigates inventory models in which the stockout cost is replaced by a minimal service level constraint (SLC) that requires a certain level of service to be met in every period. The minimal service level approach has the virtue of simplifying the computation of an optimal ordering policy, because the optimal reorder level is solely determined by the minimal SLC and demand distributions. It is found that above a certain “critical” service level, the optimal (s,S) policy “collapses” to a simple base-stock or order-up-to level policy, which is independent on the cost parameters. This shows the minimal SLC models to be qualitatively different from their shortage cost counterparts. We also demonstrate that the “imputed shortage cost” transforming a minimal SLC model to a shortage cost model does not generally exist. The minimal SLC approach is extended to models with negligible set-up costs. The optimality of myopic base-stock policies is established under mild conditions.     

Costing a Finite Minimal Repair Replacement Policy

In this paper an integral equation technique is used to evaluate the expected cost for the period (0, t] of a policy involving minimal repair at failure with replacement after N failures. This cost function provides an appropriate criterion to determine the optimal replacement number N* for a system required for use over a finite time horizon. In an example, it is shown that significant cost savings can be achieved using N* from the new finite time horizon model rather than the value predicted by the usual asymptotic model.     

An optimal ordering policy for a spare unit with lead time

We consider a generalised ordering policy in which a spare unit for replacement can be delivered only by order after a constant lead time. Introducing the costs for ordering, shortage and holding, we derive the expected cost per unit time in the steady-state. We discuss the optimal ordering policy which minimises the expected cost, and show in a main theorem that the optimal policy is reduced to either one of two typical ordering policies depending on some conditions. We further discuss a similar ordering policy with varying lead times.     

Learning effects on maintenance outsourcing

The objective of this paper is to study learning effects on maintenance outsourcing. We consider a situation in which a manufacturer offers a short-term outsourcing contract to an external contractor who is responsible for scheduling and performing preventive maintenance and carrying out minimal repairs when the process fails. The manufacturer’s payment to the contractor consists of a fixed amount along with cost subsidization for each maintenance operation performed. We assume learning occurs when the contractor performs preventive maintenance that reduces both time and cost. Two types of learning are considered: natural learning and learning by costly efforts. We demonstrate that a well-designed payment scheme can induce the contractor to adopt the maintenance schedule that maximizes the manufacturer’s profit.     

Optimal order-replacement policy for a phase-type geometric process model with extreme shocks

A system is subject to random shocks that arrive according to a phase-type (PH) renewal process. As soon as an individual shock exceeds some given level the system will break down. The failed system can be repaired immediately. With the increasing number of repairs, the maximum shock level that the system can withstand will be decreasing, while the consecutive repair times after failure will become longer and longer. Undergoing a specified number of repairs, the existing system will be replaced by a new and identical one. The spare system for the replacement is available only by sending a purchase order to a supplier, and the duration of spare system procurement lead time also follows a PH distribution. Based on the number of system failures, a new order-replacement policy (also called $(K\text{,}N)$ policy) is proposed in this paper. Using the closure property of the PH distribution, the long-run average cost rate for the system is given by the renewal reward theorem. Finally, through numerical calculation, it is determined an optimal order-replacement policy such that the long-run expected cost rate is minimum.     

An optimal repair–replacement policy for a cold standby system with use priority

In this paper, the maintenance problem for a cold standby system consisting of two dissimilar components and one repairman is studied. Assume that both component 1 and component 2 after repair follow geometric process repair and component 1 is given priority in use when both components are workable. Under these assumptions, using geometric process repair model, we consider a replacement policy N under which the system is replaced when the number of failures of component 1 reaches N. Our purpose is to determine an optimal replacement policy N1 such that the average cost rate (i.e. the long-run average cost per unit time) of the system is minimized. The explicit expression for the average cost rate of the system is derived and the corresponding optimal replacement policy N1 can be determined analytically or numerically. Finally, a numerical example is given to illustrate some theoretical results and the model applicability.     

Operational asset replacement strategy: A real options approach

This paper analyses the problem of replacement by investigating the optimal moment of investment replacement in a given tax environment with a given depreciation policy. An operation and maintenance cost minimization model, based on the definition of equivalent annual cost, is applied to a real options paradigm. The developed methodology allows for an innovative evaluation of the flexibility of replacement process analysis. A new two-factor evaluation function is introduced to quantify decisions on asset replacement under a unique cycle environment. This study improves upon previous findings in the literature as it accounts for autonomous salvage value processes. Based on partial differential equations, this model achieves a general analytical solution and particular numerical solution. The results differ significantly from those observed in one-factor models by showing evidence of over-evaluation in optimal levels of replacement, and by confirming suspicions that different types of uncertainties produce non-monotonous effects on the optimal replacement level. The scientific contribution of this study lies in new and stronger approaches to equivalent annual cost literature, supplying an algorithm for operation and maintenance cost minimization that is conditioned by autonomous salvage value. This study also contributes to the real options literature by developing a two-factor model with Brownian processes applied to asset replacement.