On the effectiveness of viscous dissipation and Joule heating on steady Magnetohydrodynamic heat and mass transfer flow over an inclined radiate isothermal permeable surface in the presence of thermophoresis

The combined effect of viscous dissipation and joule heating on steady Magnetohydrodynamic heat and mass transfer flow of viscous incompressible fluid over an inclined radiate isothermal permeable surface in the presence of thermophoresis is studied. Numerical results for the dimensionless velocity, temperature and concentration profiles as well as the local skin-friction coefficient, the local Nusselt number and the local Stanton number are displayed graphically for various physical parameters. Comparisons with previously published work are performed and the results are found to be in very good agreement. Results show that rate of heat transfer is sensitive for increasing angle of inclination parameter for the case of fluid injection and it decreases with the increase of magnetic field parameter and Eckert number.     

The influence of thermal radiation on MHD flow of Maxwellian fluids above stretching sheets

Flow induced in a viscoelastic fluid by a linearly stretched sheet is investigated assuming that the fluid is Maxwellian and the sheet is subjected to a transverse magnetic field. The objective is to investigate the effects of parameters such as elasticity number, magnetic number, radiative heat transfer, Prandtl number, and Eckert number on the temperature field above the sheet. To do this, boundary layer theory will be used to simplify energy and momentum equations assuming that fluid physical/rheological properties remain constant. A suitable similarity transformation will be used to transform boundary layer equations from PDEs into ODEs. Homotopy analysis method (HAM) will be invoked to find an analytical solution for the temperature field above the sheet knowing the velocity profiles (see Alizadeh-Pahlavan et al. [Alizadeh-Pahlavan A, Aliakbar V, Vakili-Farahani F, Sadeghy K. MHD flows of UCM fluids above porous stretching sheets using two-auxiliary parameter homotopy analysis method. Commun. Nonlinear Sci Numer Simulat, in press]). The importance of manipulating the transverse velocity component, v, will be discussed on the temperature field above the sheet.     

Effects of mass transfer on free convective flow of a dissipative,incompressible fluid past an infinite vertical porous plate with suction

An analysis of the mass transfer effects on the free convective flow of an incompressible, dissipative, viscous fluid past an infinite, vertical porous plate with constant suction, has been carried out. Approximate solutions to coupled non-linear equations governing the flow are derived. The velocity and the temperature profiles are shown graphically for air (P=0·71). The effects of Gr (Grashof number), Gc (the modified Grashof number), Sc (Schmidt number), E (Eckert number) are discussed qualitatively during the course of discussion. It is observed that due to the addition of the foreign mass, there is a rise in the velocity and a fall in the temperature. But the skin-friction increases when Sc?1 and it decreases when Sc ～1. The rate of heat transfer increases for Sc<1 and decreases for Sc>1.     

Adaptation of the law of the wall boundary treatment to include volumetric heating effects

Computational Fluid Dynamics (CFD) simulations of liquid–metal spallation targets, such as MEGAPIE and ESS, which utilize the High Reynolds number k–ε turbulence model, invariably incorporate an implicit law of the wall treatment in which a linear or logarithmic fit to the velocity and temperature profiles is made next to heated, non-slip surfaces. The law is well-established, but has been derived from the assumptions that the wall shear stress and the normal heat flux are constant through the viscous sub-layer and buffer zone, which lie beneath the turbulent boundary layer. However, in the case of the heat flux, this condition will be violated for applications in which there is intense volumetric heating in the near-wall layers. This is just the case for the spallation reactions taking place in liquid–metal targets as a result of proton bombardment. In this article, a modified law of the wall is derived to be used under such conditions. Use of the law is illustrated by means of flow in a flat channel and one application to a spallation target. From the applications considered, it is found that the effect of the modification is small, provided the local mesh resolution is chosen appropriately. Specific recommendations regarding optimum mesh size for liquid–metal heat transfer problems are given, which will be of general interest, with or without volumetric heating.     

Entropy generation under the effect of suction/injection

This work investigates entropy generation in a steady flow of viscous incompressible fluids between two infinite parallel porous plates. The fluid temperature variation is due to asymmetric heating of the porous plates as well as viscous dissipation. Two different physical situations are discussed with their entropy generation profiles: (i) Couette flow with suction/injection and (ii) pressure-driven Poiseuille flow with suction/injection. In each case, closed form expressions for entropy generation number and Bejan number are derived in dimensionless form by using the expressions for velocity and temperature which are derived by solving the resulting momentum and energy equations by the method of undetermined coefficient. The effect of the governing parameters on velocity, temperature, entropy generation and Bejan number are extensively discussed with the help of graphs. It is interesting to remark that entropy generation number increases with suction on one porous plate while it decreases on the other porous plate with injection.     

Effect of Hall current on transient hydromagnetic Couette–Poiseuille flow of a viscoelastic fluid with heat transfer

The unsteady Couette–Poiseuille flow of an electrically conducting incompressible non-Newtonian viscoelastic fluid between two parallel horizontal non-conducting porous plates is studied with heat transfer considering the Hall effect. A sudden uniform and constant pressure gradient, an external uniform magnetic field that is perpendicular to the plates and uniform suction and injection through the surface of the plates are applied. The two plates are kept at different but constant temperatures while the Joule and viscous dissipations are taken into consideration. Numerical solutions for the governing momentum and energy equations are obtained using finite difference approximations. The effect of the Hall term, the parameter describing the non-Newtonian behavior, and the velocity of suction and injection on both the velocity and temperature distributions is examined.     

Effect of aligned magnetic field on the steady viscous flow past a circular cylinder

The steady viscous incompressible and slightly conducting fluid flow around a circular cylinder with an aligned magnetic field is simulated for the range of Reynolds numbers 100 ? Re ? 500 using the Hartmann number, M. The multigrid method with defect correction technique is used to achieve the second order accurate solution of complete non-linear Navier–Stokes equations. The magnetic Reynolds number is assumed to be small. It is observed that volume of the separation bubble decreases and drag coefficient increases as M is increased. We noticed that the upstream base pressure increases slightly with increase of M whereas downstream base pressure decreases with increase of M. The effect of the magnetic field on the flow is discussed with contours of streamlines, vorticity, plots of surface pressure and surface vorticity.     

Homotopy analysis method for the asymmetric laminar flow and heat transfer of viscous fluid between contracting rotating disks

The present work investigates the effects of the disks contracting, rotation, heat transfer and different permeability on the viscous fluids and temperature distribution between two heated contracting rotating disks. Two cases are considered. For the first case, we neglect the viscous dissipation effects in the energy equation and reduce the Navier-Stokes equations and energy equation into nonlinear coupled ODEs by introducing the Von Kármán type similarity transformations. The effects of various physical parameters like expansion ratio, Prandtl number, Reynolds number and rotation ratio on the velocity and temperature are discussed in detail. The second and more general case is that we consider the viscous dissipation in the energy equation. Under this assumption, the energy equation is reduced to a ordinary differential equation including the Eckert number, whose solution also is solved by HAM.     

Similarity solutions for mixed convection boundary layer flow over a permeable horizontal flat plate

The effects of suction and injection on steady laminar mixed convection boundary layer flow over a permeable horizontal flat plate in a viscous and incompressible fluid is investigated in this paper. The similarity solutions of the governing boundary layer equations are obtained for some values of the suction and injection parameter f₀, the constant exponent n of the wall temperature as well as the mixed convection parameter λ. The resulting system of nonlinear ordinary differential equations is solved numerically for both assisting and opposing flow regimes using a finite-difference scheme known as the Keller-box method. Numerical results for the reduced skin friction coefficient, the reduced local Nusselt number, and the velocity and temperature profiles are obtained for various values of the parameters considered. Dual solutions are found to exist for the opposing flow.     

Stability of equilibria uniformly in the inviscid limit for the Navier-Stokes-Poisson system

We prove a stability result of constant equilibria for the three dimensional Navier-Stokes-Poisson system uniform in the inviscid limit. We allow the initial density to be close to a constant and the potential part of the initial velocity to be small independently of the rescaled viscosity parameter ε while the incompressible part of the initial velocity is assumed to be small compared to ε. We then get a unique global smooth solution. We also prove a uniform in ε time decay rate for these solutions. Our approach allows to combine the parabolic energy estimates that are efficient for the viscous equation at ε fixed and the dispersive techniques (dispersive estimates and normal forms) that are useful for the inviscid irrotational system.     

Axisymmetric flow over a backward-facing step in an annular pipe

The incompressible flow of a Newtonian fluid over a backward-facing step is investigated numerically. The geometry is an annular pipe in which the radius of the inner cylinder decreases suddenly. Keeping the radial expansion ratio fixed axisymmetric flows are computed for outlet radius ratios from 0.1 to 1 (ratio of the inner to the outer outlet radius). The Reynolds number at which the flow separates from the outer cylinder decreases as the outlet radius ratio decreases for constant inlet geometry. The growth with Reynolds number of the recirculation zone on the inner outlet cylinder just behind the step is strongly reduced when the recirculation zone on the outer cylinder is established. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Unsteady plane poiseuille flow between two parallel plates

The unsteady plane Poiseuille flow of the viscous incompressible fluid between two parallel plates has been studied. The velocity and temperature distribution have been found out after taking into consideration the rate of heat addition per unit volume and the viscous dissipation terms, when the pressure gradient is a linear function of time, in terms of some non-dimensional constantsb ₁,b ₂,b ₃ andb ₄.     

Viscous dissipation and Joule heating effects on MHD-free convection from a vertical plate with power-law variation in surface temperature in the presence of Hall and ion-slip currents

An analysis is presented to study the effects of viscous dissipation and Joule heating on MHD-free convection flow past a semi-infinite vertical flat plate in the presence of the combined effect of Hall and ion-slip currents for the case of power-law variation of the wall temperature. The fluid is permeated by a strong transverse magnetic field imposed perpendicularly to the plate on the assumption of a small magnetic Reynolds number. The governing differential equations are transformed by introducing proper non-similarity variables and solved numerically. The effects of various parameters on the velocity and temperature profiles as well as the local wall shear stresses and the local Nusselt number are presented graphically and in tabular form. It is found that the magnetic field acts as a retarding force on the tangential flow but has a propelling effect on the induced lateral flow. The skin-friction factor for the tangential flow and the local Nusselt number decrease but the skin-friction factor for the lateral flow increases as the magnetic field increases. The skin-friction factor for the tangential and lateral flows are increased while the local Nusselt number is decreased if the effect of viscous dissipation, Joule heating and heat generation are considered. The opposite trend was observed as the temperature power coefficient n is increased. Also, the skin-friction factor for the tangential flow and the local Nusselt number are increased due to the Hall and ion-slip currents, whereas the skin-friction factor for the tangential flow increases when Hall values increase to one and decreases for values of Hall greater than one, but reduces by rising ion-slip values.     

Galvanic-approximation investigation of magnetoacoustic dissipation in a viscoelastic weakly conducting cylinder

The radial oscillations of a viscoelastic, weakly conducting, nonmagnetic cylinder are studied. The oscillations are excited by a contact-free induction method in the presence of a constant axial magnetic field. The Joule heating and viscous heating densities are calculated for two types of boundary conditions. The effect of electric conductivity on the dissipation of the energy of magnetoacoustic disturbances is compared with the effect of viscosity. The spectra of resonance oscillations of the cylinder are investigated.Translated from Matematicheskie Metody i Fiziko-Mekhanicheskie Polya, No. 5, pp. 44–49, 1987.     

Heat transfer for flow past permeable bed

A theoretical analysis of the temperature distribution is presented for a viscous liquid through a two dimensional parallel channel formed by an impermeable upper plate and permeable lower plate under the action of a constant pressure gradient past a porous bed. It is shown that the flow properties are dependent on the parametersα, β andσ characteristic of the permeable material. The effects of these parameters on temperature distribution and Nusselt number at both the plates are studied in detail.     

On the unsteady flow and temperature distribution of a viscous incompressible fluid between two parallel flat plates

The unsteady flow and temperature distribution of a viscous incompressible fluid between two parallel flat plates has been investigated. The pressure gradient is varying linearly with time. The velocity and temperature profiles for various values oft have been shown graphically. Fort = 0, the velocity and temperature profiles correspond to the plane Poiseuille flow. The velocity and temperature both increase with time and they are maximum on the central plane of the channel.     

On the flow of a viscous incompressible fluid between two coaxial rotating porous cylinders

Exact solution of the Navier-Stokes equations for the laminar flow of a viscous incompressible fluid between two coaxial rotating porous cylinders, kept at constant temperatures, has been studied. The rate of injection at one cylinder is taken to be the same as the rate of suction at the other. Expressions for the velocity and temperature distributions and for the torque required to turn the outer cylinder are obtained. The effects of λ (injection parameter), σ (the ratio of the radii of the cylinders) and Pé (Péclet number = λPr) on them are shown graphically.     

Falling film flow of a viscoelastic fluid along a wall

In this paper, we study the heat transfer in the fully developed flow of a viscoelastic fluid, a slag layer, down a vertical wall. A new constitutive relation for the stress tensor of this fluid is proposed, where the viscosity depends on the volume fraction, temperature, and shear rate. For the heat flux vector, we assume the Fourier's law of conduction with a constant thermal conductivity. The model is also capable of exhibiting normal stress effects. The governing equations are non‐dimensionalized and numerically solved to study the effects of various dimensionless parameters on the velocity, temperature, and volume fraction. The effect of the exponent in the Reynolds viscosity model is also discussed. The different cases of shear‐thinning and shear‐thickening, cooling and heating, are compared and discussed. The results indicate that the viscous dissipation and radiation (at the free surface) cause the temperature to be higher inside the flow domain. Copyright © 2013 John Wiley & Sons, Ltd.     

Microorganisms swimming through radiative Sutterby nanofluid over stretchable cylinder: Hydrodynamic effect

In the present article, radiative Sutterby nanofluid flow over a stretchable cylinder is considered. The suspended swimming microorganisms have been deliberated in the fluid analysis. Different processes such as Brownian motion, thermophoresis, Joules heating, and viscous dissipation have been inspected in the presences of stratification parameters. The solutions for flow profiles have been obtained via optimal homotopy analysis method. Impacts of different physical involved variables on non-dimensional velocity, temperature, nanofluid concentration, and concentration of density of swimming microorganisms have been debated. Coefficient of skin friction, local Nusselt number, Sherwood number, and density of motile organisms have been calculated. The results reveal that Sutterby fluid parameter enhances the skin friction and has a reverse impact on the velocity, while an increase in stratification causes a declination in the flow boundary layers. The temperature of the flow is also seen to be boosted by the increment in Brownian motion parameter. Analysis of entropy generation shows that the concentration difference parameter maximizes the entropy and minimizes the dimensionless Bejan number.     

Mixed convection of a viscous dissipating fluid about a vertical flat plate

In this study, the effect of the viscous dissipation in steady, laminar mixed convection heat transfer from a heated/cooled vertical flat plate is investigated in both aiding and opposing buoyancy situations. The external flow field is assumed to be uniform. The governing systems of partial differential equations are solved numerically using the finite difference method. A parametric study is performed in order to illustrate the interactive influences of the governing parameters, mainly, the Richardson number, Ri (also known as the mixed convection parameter) and the Eckert number, Ec on the velocity and temperature profiles as well as the friction and heat transfer coefficients. Based on the facts the free stream is either in parallel or reverse to the gravity direction and the plate is heated or cooled, different flow situations are identified. The influence of the viscous dissipation on the heat transfer varied according to the situation. For some limiting cases, the obtained results are validated by comparing with those available from the existing literature. An expression correlating Nu in terms of Pr, Ri and Ec is developed.