飞机跑道胶痕的自动识别系统设计与实现

为了减轻机场跑道除胶工作人员的劳动强度,提高除胶工作效率,文章提出了一种基于机器视觉的胶痕自动查找和识别方法,设计了基于ARM单片机控制的图像无线采集和基于PC机控制的图像接收、图像预处理和图像识别系统。文章通过分析预处理后的数据特点,确定了基于细胞神经网络算法的胶痕识别算法,然后在MATLAB仿真环境下确定了该算法的最优模型和参数,最后在Visual C++ 6.0环境下完成了该算法的程序编译,调试并完成了对胶痕的自动识别过程。理论仿真和程序测试的结果证明了文章提出的方法在胶痕自动识别系统中的可行性,也为机场特种设备的无人化和智能化提供了参考。     

Ca和Ce双原子复合填充p型CamCenFexCo4－xSb12化合物的合成及热电性能

用高温熔融法合成了Ca和Ce复合填充的单相p型Ca_mCe_nFe_{xCo4-xSb12化合物，探索了两种原子复合填充对其热电性能的影 响规律.研究结果表明，填充分数相同时，Ca和Ce两种原子复合填充的p型CamCe nFexCo4-xSb12化合物的载流子浓度和电 导率介于Ca或Ce一种原子单独填充的化合物之间，且随两种原子填充分数m+n的增加而降低 ；赛贝克系数随两种原子填充总量，尤其是Ce填充分数m的增加以及温度的上升而增加；在 相同填充分数时，两种原子复合填充的p型CamCenFexC o4-xSb12化合物的晶格热导率较Ca或Ce一种原子单独填充的化合物 的晶格热导率低，当总填充分数m+n为0.3左右，且Ca和Ce的填充量大致相等时，化合物的晶 格热导率最低.p型Ca0.18Ce0.12Fe1.45Co2.55Sb12.21化合物的最大热电性能指数ZT值在750K时达到1.17. 关键词： skutterudite化合物 双原子复合填充 合成 热电性能}     

Catalytic effect of water,water dimer,water trimer,HCOOH, H2SO4, CH3CH2COOH and HN(NO2)2 on the isomerisation of HN(NO2)2 to O2NNN(O)OH: a mechanism study

In this article, the isomerisation mechanisms of HN(NO₂)₂ to O₂NNN(O)OH without and with catalyst X (X = H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄, CH₃CH₂COOH and HN(NO₂)₂) have been investigated theoretically at the CBS-QB3 level of theory. Our results show that the catalyst X (X = H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄ and CH₃CH₂COOH) shows different positive catalytic effects on reducing the apparent activation energy of the isomerisation reaction processes. Such different catalytic effects are mainly related to the number of hydrogen bonds and the size of the ring structure in X (X = H₂O, (H₂O)₂ and (H₂O)₃)-assisted transition states, as well as different values of pK_a for H₂SO₄, HCOOH and CH₃CH₂COOH. Very interesting is also the fact that H₂SO₄-assisted reaction is the most favourable for the hydrogen transfer from HN(NO₂)₂ to O₂NNN(O)OH, due to the smallest pK_a (?3.0) value of H₂SO₄ than H₂O, HCOOH, H₂SO₄ and CH₃CH₂COOH, and also because of the largest ∠X???H???Y (the angle between the hydrogen bond donor and acceptor) involved in H₂SO₄-assisted transition state. Compared to the self-catalysis of the isomerisation mechanisms of HN(NO₂)₂ to O₂NNN(O)OH, the apparent activation energy of H₂SO₄-assisted channel also reduces by 9.6 kcal?mol^?1, indicating that H₂SO₄ can affect the isomerisation of HN(NO₂)₂ to O₂NNN(O)OH, most obvious among all the catalysts H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄, CH₃CH₂COOH and HN(NO₂)₂.     

Surface modification of Mg2B2O5 whisker and its effect on the mechanical properties and thermostability of polycarbonate/Mg2B2O5w composites

The Mg₂B₂O₅ whiskers (Mg₂B₂O₅w) were modified by boric acid ester (BE) coupling agent and used to prepare polycarbonate (PC) composites. Surface wettability test and evaluation of dispersibility of BE-modified Mg₂B₂O₅w (BE-Mg₂B₂O₅w) in n-heptane were carried out by water contact angle measurement and polarizing microscopy, respectively. The surface chemical characteristics of BE-Mg₂B₂O₅w and estimation of the amount of tightly bonded organic modifier were examined by Fourier transform infrared spectrometry (FT-IR) and thermogravimetric analysis (TGA), respectively. The influence of BE-Mg₂B₂O₅w on the mechanical property, morphology and thermostability of PC composites was investigated by using universal testing machine, scanning electron microscopy (SEM), dynamic mechanical analysis (DMA) and TGA, respectively. It was found that BE was successfully grafted to the surface of Mg₂B₂O₅w, and the hydrophobic BE-Mg₂B₂O₅w leads to high ratio of adhesion work to interfacial tension between PC and BE-Mg₂B₂O₅w, and its better dispersibility in n-heptane. Furthermore, the incorporation of BE-Mg₂B₂O₅w into PC matrix resulted in higher tensile properties of PC/BE-Mg₂B₂O₅w than that of PC/Mg₂B₂O₅w composites and lower maximum weight loss rate than that of PC. The storage modulus of the PC/Mg₂B₂O₅w composites increased obviously as a function of whisker content, especially for the composites with BE-Mg₂B₂O₅w, but the T_g value changed little.     

Raman characterizations and structural properties of the binary TeO2?WO3, TeO2?CdF2 and ternary TeO2?CdF2?WO3 glasses

The Raman spectroscopy technique was used to characterize the microstructure and the crystallization properties of the as‐cast and heat‐treated binary TeO₂ WO₃, TeO₂ CdF₂ and ternary TeO₂ CdF₂ WO₃ glasses and glass ceramics. The results were compared with those obtained by using the X‐ray diffraction technique. The effect of the WO₃ and CdF₂ contents on the TeO₂ glass network and the intensity ratios of the deconvoluted Raman peaks were determined. The shifts in the Raman band wavenumbers and the intensity values for each band were investigated. The Raman results indicated that the glasses were mainly formed by the [TeO₄] and [TeO₃] units. The [TeO₄] units convert to [TeO₃] units with the addition of WO₃ and CdF₂ into tellurite glasses. All the crystalline phases such as α‐TeO₂, δ‐TeO₂ and γ‐TeO₂ existing in the TeO₂ WO₃, TeO₂ CdF₂ and TeO₂‐ WO₃ CdF₂ glasses were determined. The transformation of the metastable γ‐TeO₂ phase into stable α‐TeO₂ was observed for the (1 − x)TeO₂ xWO₃ (where x = 0.15, 0.20, 0.25), 0.90Te₂ 0.10CdF₂, the 0.85TeO₂ 0.10CdF₂ 0.05WO₃ and 0.80TeO₂ 0.10CdF₂ 0.10WO₃ glasses, and the transformation of the metastable δ‐TeO₂ phase into the stable α‐TeO₂ was also observed for the TeO₂ CdF₂ WO₃ glass system. In addition, an unidentified phase formation, labeled ε, was determined. Copyright © 2009 John Wiley & Sons, Ltd.     

SrBi2Ta2O9/Bi4Ti3O12复合铁电薄膜的制备与特性研究

采用溶胶凝胶工艺在p-Si衬底上制备了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合铁电薄膜. 研究了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合薄膜的微观结构与生长行为、铁电性能和疲劳特性. 研究表明: Si衬底Bi₄Ti< 关键词： 2Ta₂O₉')" href="#">SrBi₂Ta₂O₉ 4Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 复合铁电薄膜 溶胶凝胶工艺     

Structure of Artificial Grain Boundaries in Sapphire Bicrystals with Intermediate Layers

The structure of the artificial grain boundaries in Al₂O₃ bicrystals withY₃Al₅O₁₂ and Y-stabilizedZrO₂ (Y-ZrO₂) intermediate layers was studiedwith high resolution electron microscopy, electron diffraction and energydispersive X-ray analysis. TheY₃Al₅O₁₂ intermediate layer wasfound to be polycrystalline with three different orientation relationshipsbetween the ₂O₃ and theY₃Al₅O₁₂. The structure of theY₃Al₅O₁₂/₂O₃ interfaces is described.Also₂O₃ bicrystals with an Y-ZrO₂/₂O₃/Y-ZrO₂/₂O₃/Y-ZrO₂intermediate layer, prepared at two different temperatures, werestudied.Recry stallization of the intermediate layers occurred during thesolid phase intergrowth of the ₂O₃ bicrystalsparts and only an Y-ZrO₂ layer was found as intermediatelayer. The misorientation between the consecutive Y-ZrO₂grains was less than 1.5°. Misfit dislocations and atomic height stepsdecorate the Y-ZrO₂/₂O₃interface.     

Effects of coating parameters on the morphology of SiO2-coated TiO2 and the pigmentary properties

SiO₂-coated TiO₂ powders were prepared by the chemical deposition method starting from rutile TiO₂ and Na₂SiO₃. The SiO₂-coated TiO₂ powders were characterized by X-ray photoelectron spectroscopy, Zeta-potential analysis, Fourier transform infrared spectroscopy, and transmission electron microscopy. The evolution of island-like and uniform coating layers was found to depend upon the ratio of Na₂SiO₃ to TiO₂, reaction temperature, and pH. The whiteness and brightness of the SiO₂-coated TiO₂ powders increased in response to an increase in the SiO₂ loading, but there was a maximum value among the light scattering indexes. The SiO₂-coated TiO₂ powders possessed more negative Zeta potentials than the naked TiO₂. The dispersibility of the SiO₂-coated TiO₂ powders with the continuous and uniform SiO₂ coating layers was higher than that of the naked TiO₂ and the SiO₂-coated TiO₂ powders with the island-like SiO₂ coating layers.     

Effect of heat treatment on the structure and the thermoelectric properties of Sb<Subscript>0.9</Subscript>Bi<Subscript>1.1</Subscript>Te<Subscript>2.9</Subscript>Se<Subscript>0.1</Subscript> thin films and composites based on them

This work considers the effect of vacuum annealing on the thermoelectric properties of Sb_0.9Bi_1.1Te_2.9Se_0.1 thin film and Sb_0.9Bi_1.1Te_2.9Se_0.1–C composites with various carbon contents produced by ion-beam deposition in an argon atmosphere. The electrical resistivity and the thermopower of Sb_0.9Bi_1.1Te_2.9Se_0.1–C nanocomposites are found to be dependent on not only the carbon concentration but also the type and the concentration of intrinsic point defects of the Sb_0.9Bi_1.1Te_2.9Se_0.1 solid solution, which determine the type of conductivity of Sb_0.9Bi_1.1Te_2.9Se_0.1 granules. The power factors are estimated for films of Sb_0.9Bi_1.1Te_2.9Se_0.1 solid solution and films of Sb_0.9Bi_1.1Te_2.9Se_0.1–C composites and found to have values comparable with the values for nanostructured materials on the basis of (Bi,Sb)₂(Te,Se)₃ solid solutions.     

Effect of some additions on the sinterability and magnetic properties of barium hexaferrite

The effect of additions on the densification of previously prepared stoichiometric barium hexaferrite, during the initial and intermediate stages of sintering, as well as on the coercivity and remanence were studied. The effect of non-stoichiometry, SiO₂, Al₂O₃, Cr₂O₃, TiO₂, SnO₂, MnO₂, MgO, NiO and Bi₂O₃ is included.While SiO₂ and Bi₂O₃ form liquid phases that increase the density, Al₂O₃, Cr₂O₃ and MnO₂ form a limited solid solution and are generally beneficial when added in the proper amounts. At 1300 SiO₂ up to 0.55% and Al₂O₃ up to 1% gave better magnetic properties. On the other hand addition of TiO₂, MgO, NiO or SnO₂ has a deleterious effect.     

Electrical and Thermal Transport Properties of n-type Bi6Cu2Se4O6 (2BiCuSeO + 2Bi2O2Se)

New thermoelectric materials, n-type Bi₆Cu₂Se₄O₆ oxyselenides, composed of well-known BiCuSeO and Bi₂O₂Se oxyselenides, are synthesized with a simple solid-state reaction. Electrical transport properties, microstructures, and elastic properties are investigated with an emphasis on thermal transport properties. Similar to Bi₂O₂Se, it is found that the halogen-doped Bi₆Cu₂Se₄O₆ possesses n-type conducting transports, which can be improved via Br/Cl doping. Compared with BiCuSeO and Bi₂O₂Se, an extremely low thermal conductivity can be observed in Bi₆Cu₂Se₄O₆. To reveal the origin of low thermal conductivity, elastic properties, sound velocity, Grüneisen parameter, and Debye temperature are evaluated. Importantly, the calculated phonon mean free path of Bi₆Cu₂Se₄O₆ is comparable to the interlayer distance for BiO─CuSe and BiO─Se layers, which is ascribed to the strong interlayer phonon scattering. Contributing from the outstanding low thermal conductivity and improved electrical transport properties, the maximum ZT ≈0.15 at 823 K and ≈0.11 at 873K are realized in n-type Bi₆Cu₂Se_3.2Br_0.8O₆ and Bi₆Cu₂Se_3.6Cl_0.4O₆, respectively, indicating the promising thermoelectric performance in n-type Bi₆Cu₂Se₄O₆ oxyselenides.     

Structural and magnetic properties of pulsed laser deposited SrRuO3/CoFe2O4/La2/3Sr1/3MnO3 magnetic oxide heterostructures on SrTiO3(001) and MgO(001)

We report on the growth of all-oxide SrRuO₃/CoFe₂O₄/La_2/3Sr_1/3MnO₃ and La_2/3Sr_1/3MnO₃/CoFe₂O₄/SrRuO₃ heterostuctures on SrTiO₃(001) and MgO(001) substrates by pulsed laser deposition. Structural analyses by X-ray diffraction and transmission electron microscopy clearly indicate the preservation of epitaxial relations when the La_2/3Sr_1/3MnO₃ layer is grown first, whereas trilayers with SrRuO₃ at the bottom are more disordered. Both the substrate material and the deposition sequence strongly influence the formation of various structural defects such as interfacial dislocations and sub-grain structures, and this is clearly reflected by a reduction of the saturation magnetization in the top electrode. When the substrate material and the deposition sequence are correctly chosen, however, the magnetic moments of the La_2/3Sr_1/3MnO₃ and SrRuO₃ layers reverse independently, and the La_2/3Sr_1/3MnO₃ layer retains bulk-like magnetic properties.     

Solid state- and magneto-chemistry of the SrO-Fe2O3 system: III. The non-existence of single-phase “SrFe2O4”

A detailed Mössbauer investigation of 1 : 1 SrO : Fe₂O₃ has shown that a single phase with the SrFe₂O₄ composition does not exist in the SrO-Fe₂O₃ system when SrCo₃ and Fe₂O₃ are reacted in air. A multiphase assemblage of SrFe₁₂O₁₉, Sr₄Fe₆O₁₃, and SrFeO_3-x is observed in the material with an overall composition of “SrFe₂O₄”. By means of novel analyses of the complex Mössbauer spectra of the 1 : 1 SrO : Fe₂O₃ composition, all of the Fe containing phases have been identified and their respective mole percentages determined. The relative amounts of the phases present depend on the final firing temperature. The published X-ray powder data for “SrFe₂O₄” can be interpreted satisfactorilly in terms of the Mössbauer results, i.e., as a multiphase assemblage, and corresponds to a low temperature assemblage of SrFe₁₂O₁₉, Sr₄Fe₆O₁₃ and SrFeO_3-x for the overall composition of “SrFe₂O₄”.     

The system Na2CO3–CaCO3–MgCO3 at 6 GPa and 900–1250°C and its relation to the partial melting of carbonated mantle

In order to constrain the Na₂CO₃–CaCO₃–MgCO₃ T–X diagram at 6?GPa in addition to the binary and pseudo-binary systems we conducted experiments along the Na₂CO₃–Ca_0.5Mg_0.5CO₃ join. At 900–1000°C, melting does not occur and isothermal sections are presented by one-, two- and three-phase regions containing Ca-bearing magnesite, aragonite, Na₂CO₃ (Na₂) and Na₂(Ca_1–0.9Mg_0-0.1)_3-4(CO₃)_4-5 (Na₂Ca_3-4), Na₄(Ca_1–0.6Mg_0–0.4)(CO₃)₃ (Na₄Ca), Na₂(Ca_0-0.08Mg_1–0.92)(CO₃)₂ (Na₂Mg) phases with intermediate compositions. The minimum melting point locates between 1000°C and 1100°C. This point would resemble that of three eutectics: Mgs–Na₂Ca₃–Na₂Mg, Na₂Mg–Na₂Ca₃–Na₄Ca or Na₂Mg–Na₄Ca–Na₂, in the compositional interval of [45Na₂CO₃·55(Ca_0.6Mg_0.4)CO₃]–[60Na₂CO₃·40Ca_0.6Mg_0.4CO₃]. The liquidus projection has seven primary solidification phase regions for Mgs, Dol, Arg, Na₂Ca₃, Na₄Ca, Na₂ and Na₂Mg. The results suggest that extraction of Na and Ca from silicate to carbonate components has to decrease minimum melting temperature of carbonated mantle rocks to 1000–1100°C at 6?GPa and yields Na-rich dolomitic melt with a Na# (Na₂O/(Na₂O?+?CaO?+?MgO))?≥?28?mol%.     

Two-dimensional antiferromagnetic correlations in an La<Subscript>1.4</Subscript>Sr<Subscript>1.6</Subscript>(Mn<Subscript>0.9</Subscript>Co<Subscript>0.1</Subscript>)<Subscript>2</Subscript>O<Subscript>7</Subscript> single crystal

The temperature and field dependences of the magnetization, the electrical resistivity, and the magnetostriction of bilayer lanthanum manganite La_1.4Sr_1.6Mn₂O₇ single crystals and cobalt-doped La_1.4Sr_1.6(Mn_0.9Cu_0.1)₂O₇ are measured. The magnetostriction of the cobalt-doped compound increases as compared to the initial La_1.4Sr_1.6Mn₂O₇ compound, and the magnetization and the magnetoresistance of the former compound change substantially. Powder and single-crystal neutron diffraction patterns are used to detect ferromagnetic ordering in La_1.4Sr_1.6(Mn_0.9Co_0.1)₂O₇ at a temperature below T _C ~ 45(2) K, and this ordering coexists with antiferromagnetic correlations, which develop at temperatures below T _C ~ 80(5) K.     

Si基Bi4Ti3O12铁电薄膜的制备与特性研究

采用sol-gel工艺, 在分层快速退火的工艺条件下成功地制备了高质量Si基Bi_{4Ti3O12铁电薄膜. 研究了Si基Bi4Ti3O12薄膜的生长行为、铁电性能、C-V特性和疲劳特性. 研究表明: Si基Bi4Ti3O12薄膜具有随退火温度升高沿c轴择优生长的趋势; 退火温度通过影响薄膜的晶粒尺寸、生长取向和薄膜中载流子的浓度来改变Si基Bi关键词： sol-gel法 铁电薄膜 4Ti3O12')" href="#">Bi4Ti3O12 C-V特性}     

Enhanced high-rate performance of sub-micro Li4Ti4.95Zn0.05O12 as anode material for lithium-ion batteries

Zn-doped Li₄Ti₅O₁₂ was prepared by a ball milling-assisted solid-state method, and the characters were determined by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, cyclic voltammetry, and galvanostatic charge–discharge testing. The results show that Li₄Ti_5?x Zn _x O₁₂ (x?=?0, 0.05) exhibits the pure phase structure, and Zn doping does not change the electrochemical reaction process and basic spinel structure of Li₄Ti₅O₁₂. The particle size of both samples is about 300–500 nm. The prepared Li₄Ti_4.95Zn_0.05O₁₂ presents an excellent rate capability and capacity retention. At the charge–discharge rate of 1C, the initial discharge capacity of Li₄Ti_4.95Zn_0.05O₁₂ is 268 mAh g^?1. After 90 cycles at 5C, the discharge capacity of Li₄Ti_4.95Zn_0.05O₁₂ is obviously higher than that of Li₄Ti₅O₁₂. The excellent electrochemical performance of the Li₄Ti_4.95Zn_0.05O₁₂ electrode could be attributed to the improvement of reversibility by doping zinc and the sub-micro particle size.     

三元异质结构Ag-Bi2MoO6/BiPO4光催化剂高效降解苯酚红

多组分复合体系有利于电荷的有效分离,减少电子空穴对的复合几率。通过低温液相法首次合成Ag-Bi₂MoO₆/BiPO₄三元异质结构光催化剂。利用XRD、SEM、EDX及XPS等技术对样品进行了表征。结果表明,Ag纳米粒子光照积累在Bi₂MoO₆/BiPO₄的表面,通过表面等离子共振增加对可见光的吸收,同时作为电子受体促进了光生电子的转移。Ag、BiPO₄和Bi₂MoO₆形成三元异质结构有效地抑制了光生电子空穴对的复合。Ag-Bi₂MoO₆/BiPO₄表现出优异的光催化性能,其光催化活性较BiPO₄、Bi₂MoO₆和Bi₂MoO₆/BiPO₄样品有较大提高。并且对Ag-Bi₂MoO₆/BiPO₄三元异质结构的光催化机制进行了讨论。光催化过程中反应活性物种捕获实验结果表明h⁺和O₂^·-是主要的活性基团.     

AlN/Si3N4纳米多层膜的外延生长与力学性能

采用射频磁控溅射方法制备单层AlN, Si₃N₄薄膜和不同调制周期的AlN/Si₃N₄纳米多层膜.采用X射线衍射仪、高分辨透射电子显微镜和纳米压痕仪对薄膜进行表征.结果发现,多层膜中Si₃N₄层的晶体结构和多层膜的硬度依赖于Si₃N₄层的厚度.当AlN层厚度为4.0nm、 Si₃N₄层厚度 关键词： 3N₄纳米多层膜')" href="#">AlN/Si₃N₄纳米多层膜 外延生长 应力场 超硬效应     

Vibrational Behavior of Transition Metal Cupferronato Complexes: Raman Studies on Cobalt(II) Cupferronato Derivatives

The FT-Raman spectrum of cupferron, [PhN₂O₂]NH₄ and the micro-Raman spectra of the new corresponding cobalt(II) cupferronato complexes, CoL₂A₂, L = PhN₂O₂, a = H₂O, MeOH, o-C₆H₄(NH₂)₂, p-C₆H₄(NH₂)₂ and CoL₂A, a = (-C₆H₄NH₂-p)₂ were recorded and discussed. All the complexes show a Raman band at about 1302 cm¹ and the characteristic v(N-N) and δ(ONNO) modes of the anionic ligand. the vibrational analysis of the title compounds reveals the electron delocalisation over the N-nitroso-N-hydroxylaminato (ONNO) unit, as well as the bidentate coordination of the cupferronato ligand to the metal center through the oxygen atoms.