Autoignition delay modulation by high-frequency thermoacoustic oscillations in reheat flames

This paper investigates the sensitivity of the autoignition delay in reheat flames to acoustic pulsations associated with high-frequency transverse thermoacoustic oscillations. A reduced order model for the response of purely autoignition-stabilised flames to acoustic disturbances is compared with experimental observations. The experiments identified periodic flame motion associated with high-amplitude transverse limit-cycle oscillations in an atmospheric pressure reheat combustor. This flame motion was assumed to be the result of a superposition of two flame-acoustic coupling mechanisms: autoignition delay modulation by the oscillating acoustic field and displacement and deformation of the flame by the acoustic velocity. The reduced order model coupled to reaction kinetics calculations reveals that a significant portion of the observed flame motion can be attributed to autoignition delay modulation. The ignition position responds instantaneously to the acoustic pressure at the time of ignition, as observed experimentally. The model also provides insight into the importance of the history of acoustic disturbances experienced by the fuel-air mixture prior to ignition. Due to the high-frequency nature of the instability, a fluid particle can experience multiple oscillation cycles before ignition. The ignition delay responds in-phase with the net-acoustic perturbation experienced by a fluid particle between injection and ignition. These findings shed light on the underlying mechanisms of the flame motion observed in experiments and provide useful insight into the importance of autoignition delay modulation as a driving mechanism of high-frequency thermoacoustic instabilities in reheat flames.     

Theoretical and experimental investigations on damper performance for suppression of thermoacoustic oscillations

This study deals with a generic approach for prediction of pulsation suppression with acoustic dampers. Although the theory is valid for any self-oscillating system and for any damper type, the focus in this paper is on suppression of thermoacoustic oscillations using Helmholtz dampers. The developed theory has been validated using a novel experimental method. In thermoacoustics the constructive interference between the heat release and the acoustic field is responsible for growth of acoustic amplitudes. In the newly developed measurement method, this interaction has been mimicked by a feedback excitation using loudspeakers and microphones. Nonlinear time-domain acoustic network simulations are also used to support the analytical and experimental framework.     

Three-step approach for prediction of limit cycle pressure oscillations in combustion chambers of gas turbines

Currently, gas turbine manufacturers frequently face the problem of strong acoustic combustion driven oscillations inside combustion chambers. These combustion instabilities can cause extensive wear and sometimes even catastrophic damages to combustion hardware. This requires prevention of combustion instabilities, which, in turn, requires reliable and fast predictive tools. This work presents a three-step method to find stability margins within which gas turbines can be operated without going into self-excited pressure oscillations. As a first step, a set of unsteady Reynolds-averaged Navier–Stokes simulations with the Flame Speed Closure (FSC) model implemented in the OpenFOAM® environment are performed to obtain the flame describing function of the combustor set-up. The standard FSC model is extended in this work to take into account the combined effect of strain and heat losses on the flame. As a second step, a linear three-time-lag-distributed model for a perfectly premixed swirl-stabilized flame is extended to the nonlinear regime. The factors causing changes in the model parameters when applying high-amplitude velocity perturbations are analysed. As a third step, time-domain simulations employing a low-order network model implemented in Simulink® are performed. In this work, the proposed method is applied to a laboratory test rig. The proposed method permits not only the unsteady frequencies of acoustic oscillations to be computed, but the amplitudes of such oscillations as well. Knowing the amplitudes of unstable pressure oscillations, it is possible to determine how these oscillations are harmful to the combustor equipment. The proposed method has a low cost because it does not require any license for computational fluid dynamics software.     

Fishbone-like instability in a looped-tube thermoacoustic engine

Quasi-periodic bursts of acoustic oscillations were observed during the start-up process in a looped-tube thermoacoustic engine. The acoustic oscillations have a constant frequency of 111 Hz, while the bursts have "quasi-periods" in the order of 14-25 s. The quasi-periodic bursts show a new mode of amplitude growth in this thermoacoustic engine. The envelope of the acoustic oscillations has a fishbone-like shape. The nature of the observed fishbone-like instabilities suggests a strong interaction between the acoustic and temperature field.     

Simultaneous OH-PLIF and PIV measurements in a gas turbine model combustor

In highly turbulent environments, combustion is strongly influenced by the effects of turbulence chemistry interactions. Simultaneous measurement of the flow field and flame is, therefore, obligatory for a clear understanding of the underlying mechanisms. In the current studies simultaneous PIV and OH-PLIF measurements were conducted in an enclosed gas turbine model combustor for investigating the influence of turbulence on local flame characteristics. The swirling CH₄/air flame that was investigated had a thermal power of 10.3 kW with an overall equivalence ratio of ϕ=0.75 and exhibited strong thermoacoustic oscillations at a frequency of approximately 295 Hz. The measurements reveal the formation of reaction zones at regions where hot burned gas from the recirculation zones mixes with the fresh fuel/air mixture at the nozzle exit. However, this does not seem to be a steady phenomenon as there always exist regions where the mixture has failed to ignite, possibly due to the high local strain rates present, resulting in small residence time available for a successful kinetic runaway to take place. The time averaged PIV images showed flow fields typical of enclosed swirl burners, namely a big inner recirculation zone and a small outer recirculation zone. However, the instantaneous images show the existence of small vortical structures close to the shear layers. These small vortical structures are seen playing a vital role in the formation and destruction of reaction zone structures. One does not see a smooth laminar flame front in the instantaneous OH-PLIF images, instead isolated regions of ignition and extinction highlighting the strong interplay between turbulence and chemical reactions. PACS 33.20.-t; 33.50.-j; 47.27.-i; 47.32.Ef; 47.70.Pq; 82.33.Vx; 82.40.-g     

Experimental characterization of onset of acoustic instability in a nonpremixed half-dump combustor

This paper reports work on a nonpremixed half-dump combustor, in which methane is injected at the backward-facing step, and mixes and burns with the air flowing past the step in the unsteady recirculation zone. The flow and geometric parameters are widely varied, to gradually change from conditions of low-amplitude noise to excitation of high-amplitude discrete tones. The purpose of the work is to focus on the transition from the former condition to the latter, and to mark the onset of instability. Dimensionless groups such as the Helmholtz and Strouhal numbers are formed based on the observed dominant frequencies, whose variation with the air flow Reynolds number is used to identify the oscillations as those due to the natural acoustic modes or the vortex shedding process. High-speed chemiluminescence imaging reveals shedding of vortical structures in the flame zone. With variation in the conditions, flow-acoustic lock-on and transition from one vortex shedding mode to another is marked by nonlinearity in the corresponding amplitude variations. Such conditions are identified as the onset of instability in terms of the ratio of the flow time scale to the acoustic time scale and mapped against the operating fuel-air equivalence ratio of the combustor.     

Phase synchronization and collective interaction of multiple flamelets in a laboratory scale spray combustor

In this paper, we investigate the coupled behvior of the acoustic field in the confinement and the unsteady flame dynamics in a laboratory scale spray combustor. We study this interaction during the intermittency route to thermoacoustic instability when the location of the flame is varied inside the combustor. As the flame location is changed, the synchronization properties of the coupled acoustic pressure and heat release rate signals change from desynchronized aperiodicity (combustion noise) to phase synchronized periodicity (thermoacoustic instability) through intermittent phase synchronization (intermittency). We also characterize the collective interaction between the multiple flamelets anchored at the flame holder and the acoustic field in the system, during different dynamical states observed in the combustor operation. When the signals are desynchronized, we notice that the flamelets exhibit a steady combustion without the exhibition of a prominent feedback with the acoustic field. In a state of intermittent phase synchronization, we observe the existence of a short-term coupling between the heat release rate and the acoustic field. We notice that the onset of collective synchronization in the oscillations of multiple flamelets and the acoustic field leads to the simultaneous emergence of periodicity in the global dynamics of the system. This collective periodicity in both the subsystems causes enhancement of oscillations during epochs of amplitude growth in the intermittency signal. On the contrary, the weakening of the coupling induces suppression of periodic oscillations during epochs of amplitude decay in the intermittency signal. During phase synchronization, we notice a sustained synchronized movement of all flamelets with the periodicity of the acoustic cycle in the system.     

Experiments and low-order modelling of intermittent transitions between clockwise and anticlockwise spinning thermoacoustic modes in annular combustors

Annular combustion chambers of gas turbines and aircraft engines are subject to unstable azimuthal thermoacoustic modes leading to high amplitude acoustic waves propagating in the azimuthal direction. For certain operating conditions, the propagating direction of the wave switches randomly. The strong turbulent noise prevailing in gas turbine combustors is a source of random excitation for the thermoacoustic modes and can be the cause of these switching events. A low-order model is proposed to describe qualitatively this property of the dynamics of thermoacoustic azimuthal modes. This model is based on the acoustic wave equation with a destabilizing thermoacoustic source term to account for the flame’s response and a stochastic term to account for the turbulent combustion noise. Slow-flow averaging is applied to describe the modal dynamics on times scales that are slower than the acoustic pulsation. Under certain conditions, the model reduces formally to a Fokker-Planck equation describing a stochastic diffusion process in a potential landscape with two symmetric wells: One well corresponds to a mode propagating in the clockwise direction, the other well corresponds to a mode propagating in the anticlockwise direction. When the level of turbulent noise is sufficient, the stochastic force makes the mode jump from one well to the other at random times, reproducing the phenomenon of direction switching. Experiments were conducted on a laboratory scale annular combustor featuring 12 hydrogen-methan flames. System identification techniques were used to fit the model on the experimental data, allowing to extract the potential shape and the intensity of the stochastic excitation. The statistical predictions obtained from the Fokker–Planck equation on the mode’s behaviour and the direction switching time are in good agreement with the experiments.     

Dynamic behavior of a freely-propagating turbulent premixed flame under global stretch-rate oscillations

Dynamic features of a freely propagating turbulent premixed flame under global stretch rate oscillations were investigated by utilizing a jet-type low-swirl burner equipped with a high-speed valve on the swirl jet line. The bulk flow velocity, equivalence ratio and the nominal mean swirl number were 5 m/s, 0.80 and 1.23, respectively. Seven velocity forcing amplitudes, from 0.09 to 0.55, were examined with a single forcing frequency of 50 Hz. Three kinds of optical measurements, OH-PLIF, OH^* chemiluminescence and PIV, were conducted. All the data were measured or post-processed in a phase-locked manner to obtain phase-resolved information. The global transverse stretch rate showed in-phase oscillations centering around 60 (1/s). The oscillation amplitude of the stretch rate grew with the increment of the forcing amplitude. The turbulent flame structure in the core flow region varied largely in axial direction in response to the flowfield oscillations. The flame brush thickness and the flame surface area oscillated with a phase shift to the stretch rate oscillations. These two properties showed a maximum and minimum values in the increasing and decreasing stretch periods, respectively, for all the forcing amplitudes. Despite large variations in flame brush thickness at different phase angles, the normalized profiles collapse onto a consistent curve. This suggests that the self-similarity sustains in this dynamic flame. The global OH^* fluctuation response (i.e. response of global heat-release rate fluctuation) showed a linear dependency to the forcing velocity oscillation amplitudes. The flame surface area fluctuation response showed a linear tendency as well with a slope similar to that of the global OH^* fluctuation. This indicated that the flame surface area variations play a critical role in the global flame response.     

Nonlinear hydrodynamic and thermoacoustic oscillations of a bluff-body stabilised turbulent premixed flame

Turbulent premixed flames often experience thermoacoustic instabilities when the combustion heat release rate is in phase with acoustic pressure fluctuations. Linear methods often assume a priori that oscillations are periodic and occur at a dominant frequency with a fixed amplitude. Such assumptions are not made when using nonlinear analysis. When an oscillation is fully saturated, nonlinear analysis can serve as a useful avenue to reveal flame behaviour far more elaborate than period-one limit cycles, including quasi-periodicity and chaos in hydrodynamically or thermoacoustically self-excited system. In this paper, the behaviour of a bluff-body stabilised turbulent premixed propane/air flame in a model jet-engine afterburner configuration is investigated using computational fluid dynamics. For the frequencies of interest in this investigation, an unsteady Reynolds-averaged Navier–Stokes approach is found to be appropriate. Combustion is represented using a modified laminar flamelet approach with an algebraic closure for the flame surface density. The results are validated by comparison with existing experimental data and with large eddy simulation, and the observed self-excited oscillations in pressure and heat release are studied using methods derived from dynamical systems theory. A systematic analysis is carried out by increasing the equivalence ratio of the reactant stream supplied to the premixed flame. A strong variation in the global flame structure is observed. The flame exhibits a self-excited hydrodynamic oscillation at low equivalence ratios, becomes steady as the equivalence ratio is increased to intermediate values, and again exhibits a self-excited thermoacoustic oscillation at higher equivalence ratios. Rich nonlinear behaviour is observed and the investigation demonstrates that turbulent premixed flames can exhibit complex dynamical behaviour including quasiperiodicity, limit cycles and period-two limit cycles due to the interactions of various physical mechanisms. This has implications in selecting the operating conditions for such flames and for devising proper control strategies for the avoidance of thermoacoustic instability.     

Study of vortex core precession in combustion chambers

The article presents the results of experimental investigation of swirling flow of lean propane/air flame in a model combustion chamber at atmospheric pressure. To study the unsteady turbulent flow, the particle image velocimetry technique was used. It was concluded that dynamics of high swirl flows with and without combustion was determined by a global helical mode, complying with a precessing double-spiral coherent vortex structure. The studied low swirl flame had similar size and stability characteristics, but amplitude of the coherent helical structure substantially oscillated in time. The oscillations were associated with intermittently appearing central recirculation zone that was absent in the nonreacting flow. It is expected that the low swirl flow without the permanent central recirculation zone should be more sensitive to an external active control. In particular, this result may be useful for suppression of thermoacoustic resonance in combustion chambers.     

ACOUSTIC IDENTIFICATION OF COHERENT STRUCTURES IN A TURBULENT JET

Fluid-dynamic events associated with noise generation in a subsonic jet are educed by conditioning in-flow velocity and pressure signals on farfield sound measurements. The jet is located in an anechoic chamber, and farfield noise measurements are performed simultaneously with in-flow anemometric and acoustic measurements at a number of distances x from the nozzle (0?x/D?20, with D the jet diameter). The experimental data are then analyzed with a conditional averaging procedure using peaks in the acoustic signal as a trigger. An analysis of the method is developed and supported by numerical simulations. The averaging procedure permits the identification of the average time signatures of in-flow velocity and pressure associated with noise-generating coherent structures in the flow, their position at the emitting instants and their temporal statistics. The physical properties of the events associated with the averaged time signatures are then discussed.     

Finding thermoacoustic limit cycles for a ducted Burke-Schumann flame

This paper examines nonlinear thermoacoustic oscillations of a ducted Burke-Schumann diffusion flame. The nonlinear dynamics of the thermoacoustic system are studied using two distinct approaches. In the first approach, a continuation analysis is performed to find limit cycle amplitudes over a range of operating conditions. The strength of this approach is that one can characterize the coupled system’s nonlinear behaviour over a large parameter space with relative ease. It is not able to give physical insight into that behaviour, however. The second approach uses a Flame Describing Function (FDF) to characterize the flame’s response to harmonic velocity fluctuations over a range of forcing frequencies and forcing amplitudes, from which limit cycle amplitudes can be found. A strength of the FDF approach is that it reveals the physical mechanisms responsible for the behaviour observed. However, the calculation of the FDF is time consuming, and it must be recalculated if the flame’s operating conditions change. With the strengths and shortcomings of the two approaches in mind, this paper advocates combining the two to provide the dynamics over a large parameter space and, furthermore, physical insight into that behaviour at judiciously-chosen points in the parameter space. Further physical insight concerning the flame’s near-linear response at all forcing amplitudes is given by studying the forced flame in the time domain. It is shown that, for this flame model, the limit cycles arise because of the flame’s nonlinear behaviour when it is close to the inlet.     

Lock-in and quasiperiodicity in hydrodynamically self-excited flames: Experiments and modelling

Hydrodynamically self-excited flames are often assumed to be insensitive to low-amplitude external forcing. To test this assumption, we apply acoustic forcing to a range of jet diffusion flames. These flames have regions of absolute instability at their base and this causes them to oscillate at discrete natural frequencies. We apply the forcing around these frequencies, at varying amplitudes, and measure the response leading up to lock-in. We then model the system as a forced van der Pol oscillator.Our results show that, contrary to some expectations, a hydrodynamically self-excited flame oscillating at one frequency is sensitive to forcing at other frequencies. When forced at low amplitudes, it responds at both frequencies as well as at several nearby frequencies, indicating quasiperiodicity. When forced at high amplitudes, it locks into the forcing. The critical forcing amplitude for lock-in increases both with the strength of the self-excited instability and with the deviation of the forcing frequency from the natural frequency. Qualitatively, these features are accurately predicted by the forced van der Pol oscillator. There are, nevertheless, two features that are not predicted, both concerning the asymmetries of lock-in. When forced below its natural frequency, the flame is more resistant to lock-in, and its oscillations at lock-in are stronger than those of the unforced flame. When forced above its natural frequency, the flame is less resistant to lock-in, and its oscillations at lock-in are weaker than those of the unforced flame. This last finding suggests that, for thermoacoustic systems, lock-in may not be as detrimental as it is thought to be.     

Observation of coherent sheared turbulence flows in the DIII-D Tokamak

Time-resolved measurements of the turbulent density flow field in a tokamak plasma reveal low-frequency ( approximately 15 KHz), coherent oscillations in the poloidal flow, v(theta). These flow oscillations have a long poloidal wavelength (m<3) and narrow radial extent (k(r)rho(i) approximately 0.2). The estimated flow-shearing rate is of the same order of magnitude as the turbulence decorrelation rate and may thus regulate the turbulence amplitude. These features are consistent with theoretically predicted axisymmetric, self-regulating, sheared flows recognized as geodesic acoustic modes.     

Role of vortex structures in excitation of condensed system self-oscillatory burning

The effect of free convection and vortex structures arising near the “singing” flame of a gasoline blow torch on excitation of thermal self-oscillations in a resonator tube is studied experimentally. A technique for measuring the oscillation amplitude of the gas column is suggested. It is found that the excitation of acoustic oscillations decreases the height of the singing flame and the mass velocity of burning but raises the gasoline combustion efficiency. The variation of the temperature field of the singing flame over an oscillation cycle is studied by digital photometry. Hysteretic dependences of the acoustic oscillation amplitude on the thermal power of the gasoline diffusion flame are obtained. A mechanism explaining the influence of vortex structures on the self-oscillatory mode of burning in condensed systems is discussed.     

Ethanol turbulent spray flame response to gas velocity modulation

A numerical investigation of the interaction between a spray flame and an acoustic forcing of the velocity field is presented in this paper. In combustion systems, a thermoacoustic instability is the result of a process of coupling between oscillations in heat released and acoustic waves. When liquid fuels are used, the atomisation and the evaporation process also undergo the effects of such instabilities, and the computational fluid dynamics of these complex phenomena becomes a challenging task. In this paper, an acoustic perturbation is applied to the mass flow of the gas phase at the inlet and its effect on the evaporating fuel spray and on the flame front is investigated with unsteady Reynolds averaged Navier-Stokes numerical simulations. Two flames are simulated: a partially premixed ethanol/air spray flame and a premixed pre-vaporised ethanol/air flame, with and without acoustic forcing. The frequencies used to perturb the flames are 200 and 2500 Hz, which are representative for two different regimes. Those regimes are classified based on the Strouhal number St = (D/U)f_f: at 200 Hz, St = 0.07, and at 2500 Hz, St = 0.8. The exposure of the flame to a 200 Hz signal results in a stretching of the flame which causes gas field fluctuations, a delay of the evaporation and an increase of the reaction rate. The coupling between the flame and the flow excitation is such that the flame breaks up periodically. At 2500 Hz, the evaporation rate increases but the response of the gas field is weak and the flame is more stable. The presence of droplets does not play a crucial role at 2500 Hz, as shown by a comparison of the discrete flame function in the case of spray and pre-vaporised flame. At low Strouhal number, the forced response of the pre-vaporised flame is much higher compared to that of the spray flame.     

Effect of swirl on combustion dynamics in a lean-premixed swirl-stabilized combustor

The effect of inlet swirl on the flow development and combustion dynamics in a lean-premixed swirl-stabilized combustor has been numerically investigated using a large-eddy-simulation (LES) technique along with a level-set flamelet library approach. Results indicate that when the inlet swirl number exceeds a critical value, a vortex-breakdown-induced central toroidal recirculation zone is established in the downstream region. As the swirl number increases further, the recirculation zone moves upstream and merges with the wake recirculation zone behind the centerbody. Excessive swirl may cause the central recirculating flow to penetrate into the inlet annulus and lead to the occurrence of flame flashback. A higher swirl number tends to increase the turbulence intensity, and consequently the flame speed. As a result, the flame surface area is reduced. The net heat release, however, remains almost unchanged because of the enhanced flame speed. Transverse acoustic oscillations often prevail under the effects of strong swirling flows, whereas longitudinal modes dominate the wave motions in cases with weak swirl. The ensuing effect on the flow/flame interactions in the chamber is substantial.     

Effect of flame response asymmetries on the modal patterns and collective states of a can-annular lean-premixed combustion system

We experimentally study the effect of rotational asymmetries in the flame response distribution on the thermoacoustic oscillations of four turbulent lean-premixed combustors coupled in a ring network. The asymmetries are created via different combinations of high-swirl (HS) and low-swirl (LS) nozzles. By analyzing the inter-combustor acoustic interactions in terms of discrete thermoacoustic modes, we find a variety of modal patterns: (i) global alternating push–pull modes emerge for most pair-wise asymmetric nozzle combinations, (ii) 2-can push–pull modes emerge for an alternating 2-fold symmetric nozzle combination, and (iii) strong mode localization and global push–push modes emerge when the HS nozzles outnumber the LS nozzles. Using a complex systems framework, we reinterpret these modal patterns as collective states, such as a weak breathing chimera, a weak anti-phase chimera, and in-phase/anti-phase synchronization. This study shows that changing the flame response distribution of a multi-combustor system, via changes in the nozzle swirl distribution, can induce a variety of modal patterns and collective states. This sets the stage for the potential use of rotational asymmetries in the passive control of thermoacoustic modes in can-annular combustion systems.