Silicene,a promising new 2D material

Silicene is emerging as a two-dimensional material with very attractive electronic properties for a wide range of applications; it is a particularly promising material for nano-electronics in silicon-based technology. Over the last decade, the existence and stability of silicene has been the subject of much debate. Theoretical studies were the first to predict a puckered honeycomb structure with electronic properties resembling those of graphene. Though these studies were for free-standing silicene, experimental fabrication of silicene has been achieved so far only through epitaxial growth on crystalline surfaces. Indeed, it was only in 2010 that researchers presented the first experimental evidence of the formation of silicene on Ag(1 1 0) and Ag(1 1 1), which has launched silicene in a similar way to graphene. This very active field has naturally led to the recent growth of silicene on Ir(1 1 1), ZrB₂(0 0 0 1) and Au(1 1 0) substrates. However, the electronic properties of epitaxially grown silicene on metal surfaces are influenced by the strong silicene–metal interactions. This has prompted experimental studies of the growth of multi-layer silicene, though the nature of its “silicene” structure remains questionable. Of course, like graphene, synthesizing free-standing silicene represents the ultimate challenge. A first step towards this has been reported recently through chemical exfoliation from calcium disilicide (CaSi₂). In this review, we discuss the experimental and theoretical studies of silicene performed to date. Special attention is given to different experimental studies of the electronic properties of silicene on metal substrates. New avenues for the growth of silicene on other substrates with different chemical characteristics are presented along with foreseeable applications such as nano-devices and novel batteries.     

Transformation of silver nanospheres into triangular nanoplates through a photoinduced process

Triangular silver nanoplates exhibit excellent optical and catalytic properties in many fields, such as catalysts, sensors and bio-medicine. In this paper, triangular nanoplates were generated just in the presence of sodium citrate through a light-induced ripening process, which were converted from spherical silver nanoparticles by reducing silver nitrate with sodium borohydride. By using UV–Vis spectroscopy, particle size analyzer, transmission electron microscopy (TEM) and Ag⁺ concentration analysis, the effects of precursors during the preparation of triangular nanoplates were systematically investigated and the optimal experimental conditions were determined. Based on density functional theory (DFT), the adsorption energies of citrate ion, malate ion and tartronate ion on Ag (1 1 1), (1 1 0) and (1 0 0) were calculated. In addition, theoretical calculations coupled with experimental observations showed that citrate ion as capping agent could more preferentially bind to Ag (1 1 1) and thus blocked Ag (1 1 1) while only allowing extensive growth along the lateral direction. This well explains sodium citrate is an efficient agent in preparing triangular silver nanoplates.     

Electrocatalytic oxidation of sugars on silver-UPD single crystal gold electrodes in alkaline solutions

A highly catalytic system for sugar oxidation in alkaline media is presented, for the first time, in which glucose oxidation takes place at ca. −0.44 V (vs. Ag|AgCl). Modification of Au(1 1 1) single crystal surface by under potential deposition (UPD) was carried out for a variety of metals and catalytic effect for sugar oxidation has been studied in 0.1 M NaOH. UPD of Ag ad-atoms on Au electrodes were of the best catalytic activity compared to other metals (Cu, Co, Ru, Cd, Ir, and Pt, etc.). For aldose type monosaccharide studied (glucose, mannose and xylose) as well as for aldose-containing disaccharides (maltose and lactose), one significant oxidation peak was obtained, however, no significant oxidation current was observed for disaccharides like sucrose. Gluconolactone and mannolactone gave no oxidation current at negative potentials at which glucose was oxidized, indicating no more than two-electron oxidation took place. With Ag ad-atoms coverage of ca. 0.3 monolayer leads to a positive catalytic effect expressed through a negative shift of ca. 0.14 V (glucose case) on the oxidation potential and a slight increase in peak current. At the Au(1 0 0) surface similar results to those at an Au(1 1 1) electrode were also observed.     

Site-selective chemical etching of GaAs through a combination of self-organized spheres and silver particles as etching catalyst

Microfabrication of the n-GaAs substrate surface was investigated by a combination of colloidal crystal templating, electroless plating and subsequent metal-assisted etching using noble metals as a catalyst. Ag and Cu nanosized particles were deposited site selectively to form metal-honeycomb patterns on GaAs using self-organized polystyrene spheres as a mask. By Ag-assisted etching, GaAs was effectively etched into a convex-array structure. Different anisotropic etching patterns were observed throughout the substrate after Ag-assisted etching, by changing the crystal-face orientation of n-GaAs from (1 0 0) to (1 1 1).     

Signal enhancement in solution-cathode glow discharge — optical emission spectrometry via low molecular weight organic compounds

HCOOH, CH₃COOH, and CH₃CH₂OH were used as chemical modifiers in a solution-cathode glow discharge. Emission was measured directly from the discharge, without a gas–liquid separator or a secondary excitation source. Emission from Ag, Se, Pb, and Hg was strongly enhanced, and the detection limits (DL) for these elements were improved by up to an order of magnitude using a combination of HCOOH and HNO₃ compared to using HNO₃ alone. The DL was measured for Mg (1 μg/L), Fe (10 μg/L), Ni (6 μg/L), Cu (6 μg/L), Pb (1 μg/L), Ag (0.1 μg/L), Se (300 μg/L), and Hg (2 μg/L). Coefficients of determination (R²) were between 0.9986 and 0.9999. A voltage of 1 kV was used, which produced a current of approximately 70 mA.     

Stability of underpotentially deposited Ag layers on a Au(1 1 1) surface studied by surface X-ray scattering

Stability of underpotentially deposited (upd) Ag layers on Au(1 1 1) surface was investigated by surface X-ray scattering (SXS). While the complete pseudomorphic Ag bilayer on Au(1 1 1) surface obtained by upd at 10 mV (vs. Ag/Ag⁺) was maintained its structure even after the circuit was disconnected and the surface was exposed to ambient atmosphere, the pseudomorphic Ag monolayer obtained by upd at 50 mV was converted to a partial bilayer with the coverage of 0.66 and 0.46 ML for the 1st and 2nd layer, respectively. These results show that Ag bilayer is structurally more stable than Ag monolayer on Au(1 1 1) and Ag atoms of the upd monolayer move around on the Au(1 1 1) surface without potential control.     

Selective determination of trichloroacetic acid using silver nanoparticle coated multi-walled carbon nanotubes

Silver nanoparticle coated multi-walled carbon nanotubes (Ag/MWCNT) were prepared and used to fabricate a modified electrode. The Ag/MWCNT composites were observed by a transmission electron microscope (TEM), and the electrochemical properties of the Ag/MWCNT composite modified glassy carbon electrode were characterized by electrochemical measurements. The results showed that these composites had a favorable catalytic ability for the reduction of trichloroacetic acid (TCAA). Square wave voltammetric (SWV) technique was applied to detect TCAA. Under optimum conditions, the voltammetric determination of TCAA was performed with a linear range of 5.0 × 10^? 6–1.2 × 10^? 4 mol L^? 1 and a detection limit of 1.9 × 10^? 6 mol L^? 1 (S/N = 3).     

Kinetics of copper UPD on stepped platinum single crystals in the presence of acetonitrile

The kinetics of copper underpotential deposition on stepped Pt(h k l) electrodes with controlled width of (1 1 1) terraces in acidic solutions of copper sulfate with 0–200 mM of acetonitrile (AcN) has been studied by means of cyclic voltammetry. In the presence of AcN Cu UPD process is hindered both at (1 0 0) steps and (1 1 1) terraces of Pt(17 15 15) and Pt(7 5 5) faces due to blocking of the electrode surface with organic molecules, strongly adsorbed at the steps and nearby ones. The decoration of (1 1 0) steps with copper adatoms is slightly accelerated for Pt(7 7 5) electrode in the solution with 0.04 mM AcN. Increase in AcN concentration leads to inhibition of the UPD process. The difference in behavior of the stepped platinum electrodes is controlled by competitive adsorption of AcN, (bi)sulfate and Cu atoms at the step sites. AcN adsorption at (1 0 0) steps is stronger as compared with (1 1 0) ones.     

Trace molecules detectable by surface-enhanced Raman scattering based on newly developed Ag and Au nanoparticles-containing substrates

In this work, Ag and Au nanoparticles-containing substrates were first developed for obtaining a stronger surface-enhanced Raman scattering (SERS) intensity of Rhodamine 6G (R6G) and reducing the limit of detection (LOD) of trace molecules. First, the optimum electrochemically roughening conditions employed on Ag substrates for obtaining strongest SERS of R6G were investigated. Then the optimally roughened Ag substrates were incubated in the prepared Cl- and Au-containing solutions for different couples of minutes to undergo the galvanic replacement reactions. Encouragingly, the SERS of R6G adsorbed on this roughened Ag substrate modified by the replacement of Ag with Au for 5 min exhibits a higher intensity by 8-fold of magnitude, as compared with the SERS of R6G adsorbed on an unmodified roughened Ag substrate. Moreover, the practical LOD of R6G can be reduced by one order of magnitude from 1 ppq to 0.1 ppq. Further investigations indicate that the compositions of complexes formed on the substrates demonstrate decided effects on the improved SERS.     

Mass spectrometric study of the dissociation of Group XI metal complexes with fatty acids and glycerolipids: Ag2H+ and Cu2H+ ion formation in the presence of a double bond

Results of mass spectrometric studies are reported for the collisional dissociation of Group XI (Cu, Ag, Au) metal ion complexes with fatty acids (palmitic, oleic, linoleic and α-linolenic) and glycerolipids. Remarkably, the formation of M₂H⁺ ions (M = Cu, Ag) is observed as a dissociation product of the ion complexes containing more than one metal cation and only if the lipid in the complex contains a double bond. Ag₂H⁺ is formed as the main dissociation channel for all three of the fatty acids containing double bonds that were investigated while Cu₂H⁺ is formed with one of the fatty acids and, although abundant, is not the dominant dissociation channel. Also, Cu(I) and Ag(I) ion complexes were observed with glycerolipids (including triacylglycerols and glycerophospholipids) containing either saturated or unsaturated fatty acid substituents. Interestingly, Ag₂H⁺ ion is formed in a major fragmentation channel with the lipids that are able to form the complex with two metal cations (triacylglycerols and glycerophosphoglycerols), while lipids containing a fixed positive charge (glycerophospocholines) complex only with a single metal cation. The formation of Ag₂H⁺ ion is a significant dissociation channel from the complex ion [Ag₂(L–H)]⁺ where L = Glycerophospholipid (GP) (18:1/18:1). Cu(I) also forms complexes of two metal cations with glycerophospholipids but these do not produce Cu₂H⁺ upon dissociation. Rather organic fragments, not containing Cu(I), are formed, perhaps due to different interactions of these metal cations with lipids resulting from the much smaller ionic radius of Cu(I) compared to Ag(I).     

Electro-reduction of cuprous chloride powder to copper nanoparticles in an ionic liquid

Cyclic voltammetry of the CuCl powder in a cavity microelectrode revealed direct electro-reduction in solid state in 1-butyl-3-methylimidazolium hexafluorophosphate. Potentiostatic electrolysis of the salt powder (attached to a current collector) in the ionic liquid produced Cu nanoparticles as confirmed by X-ray diffraction, energy dispersive X-ray analysis, scanning and transmission electron microscopy. The particle size decreased down to 10 nm when the electrode potential was shifted from −0.9 V to −1.8 V (versus Ag/Ag⁺). The electro-reduction and the nanoparticle formation mechanisms were investigated in the ionic liquid and also in aqueous 0.1 mol L⁻¹ KClO₄ in which larger Cu particles were obtained.     

Direct electrodeposition of PbTe thin films on n-type silicon

High quality lead telluride thin films were directly deposited onto n-type silicon (1 0 0) substrates by electrodeposition at room temperature. The deposition mechanism was studied using cyclic voltammetry. The films were characterized by scanning electron microscopy, energy dispersive X-ray, X-ray diffraction, and Fourier transform infrared spectroscopy. The results indicated that the deposited PbTe films exhibited a polycrystalline rock salt structure and good optical properties with a direct band gap of 0.31 eV.     

Properties of low power spark ablation in aqueous solution for dissolution of precious metals and alloys

Spark ablation or electric dispersion of metal samples in aqueous solution can be a useful approach for sample preparation. The ablated metal forms a stable suspension that has been described as colloidal, which is easily dissolved with a small amount of concentrated (16 M) HNO₃. In this study, we have examined some of the properties of the spark ablation process for a variety of metals (Rh and Au) and alloys (stainless steel) using a low power spark (100–300 W). Particle size distributions and conductivity measurements were carried out on selected metals to characterize the stable suspensions. A LASER diffraction particle size analyzer was useful for showing that ablated particles varied in size from 1 to 30 μm for both the silver and the nickel alloy, Inconel. In terms of weight percent most of the particles were between 10 and 30 μm. Conductivity of the spark ablation solution was found to increase linearly for approximately 3 min before leveling off at approximately 300 S cm³. These measurements suggest that a significant portion of the ablated metal is also ionic in nature. Scanning electron microscope measurements revealed that a low power spark is much less damaging to the metal surface than a high power spark. Crater formation of the low power spark was found in a wider area than expected with the highest concentration where the spark was directed. The feasibility of using spark ablation for metal dissolution of a valuable artifact such as gold was also performed. Determinations of Ag (4–12%) and Cu (1–3%) in Bullion Reference Material (BRM) gave results that were in very good agreement with the certified values. The precision was ± 0.27% for Ag at 4.15% (RSD = 6.5%) and ± 0.09% for Cu at 1% (RSD = 9.0%).     

Synthesis and properties of 5,10,15,20-tetra(4-lauroylimidophenyl)porphyrin and its metal complexes

Transition metal complexes of 5,10,15,20-tetra(4-lauroylimidophenyl)porphyrin TLPPM [M = Mn(Cl), Fe(Cl), Co, Ni, Cu, Zn] have been synthesized and characterized by means of elemental analyses, UV–VIS spectra, infrared spectra, ¹H NMR spectra, molar conductance, differential scanning calorimetry (DSC), polarized optical microscopy (POM), cyclic voltammetry, luminescence spectra and surface photovoltage spectroscopies. The porphyrin ligand shows liquid crystalline behaviour, and it exhibits a high phase transition temperature 182 °C and a broad mesophase temperature span, 88 °C. The oxidation and reduction properties of the compounds were investigated by cyclic voltammetry. The photovoltaic properties and charge transfer process of the compounds were investigated by surface photovoltage spectroscopy (SPS) and electric field-induced surface photovoltage spectroscopic (EFISPS) techniques, which revealed that all the compounds are p-type semiconductors. Quantum yields of the S₁ → S₀ fluorescence were measured at room temperature. These studies will contribute to further choice and application of the liquid crystals.     

Slab calculations and Green’s function recursive methods combined to study the electronic structure of surfaces: application to Cu(1 1 1)–(4 × 4)-Na

We have recently developed an ab initio scheme for the calculation of the electronic structure of surfaces. The method is based on the combination of density functional calculations using finite slabs and the use of recursive methods to obtain the Green’s function of the surface. The slab calculations are performed using a linear combination of atomic orbitals as a basis set. From such calculation we directly obtain the surface Hamiltonian in a tight-binding form. Combining this information with that from a bulk calculation of the substrate, we gather all the pieces to construct the Hamiltonian of the semi-infinite system. The surface Green’s function is then computed using the transfer-matrix method and projected onto a wavepacket localized in the surface region. The width and energy of the surface electronic features are obtained from the analysis of such projection. With this approach we get rid of the finite size effects associated with the slab calculations. We have applied this method to the calculation of resonant charge transfer times from adsorbates to metallic substrates. We have focused in the case of core-excited Ar and S on Ru(0 0 0 1) to compare with core-hole clock spectroscopy experiments. We have also used our method to reveal the role of the elastic width in the scanning tunneling spectroscopy measurements of the quasi two-dimensional quantum well state appearing in p(2 × 2) ordered overlayers of Na and Cs on Cu(1 1 1). Here we present a new application of the method to study a more diluted alkali overlayer, the Cu(1 1 1)–(4 × 4)-Na surface. We present results for the relaxed geometries, binding energies, work function change and the position and width of the 3s Na resonance.     

Mean activity coefficient measurement and thermodynamic modelling of the ternary mixed electrolyte (MgCl2 + glucose + water) system at T = 298.15 K

In this work, the mean activity coefficients of MgCl₂ in pure water and (glucose + water) mixture solvent were determined using a galvanic cell without liquid junction potential of type: (Mg²⁺ + ISE)|MgCl₂ (m), glucose (wt.%), H₂O (100 wt.%)|AgCl|Ag. The measurements were performed at T = 298.15 K. Total ionic strengths were from (0.0010 to 6.0000) mol · kg⁻¹. The various (glucose + water) mixed solvents contained (0, 10, 20, 30 and 40)% mass fractions percentage of glucose respectively. The mean activity coefficients measured were correlated with Pitzer ion interaction model and the Pitzer adjustable parameters were determined. Then these parameters were used to calculate the thermodynamics properties for under investigated system. The results showed that Pitzer ion interaction model can satisfactory describe the investigated system. The modified three-characteristic-parameter correlation (TCPC) model was applied to correlate the experimental activity coefficient data for under investigation electrolyte system, too.     

Copper-catalyzed cross-coupling of amides and potassium alkenyltrifluoroborate salts: a general approach to the synthesis of enamides

Potassium alkenyltrifluoroborate salts undergo coupling with amides to give enamides using a catalytic amount of Cu(OAc)₂ under mild oxidative conditions. The air and water stable alkenyltrifluoroborate salts offer a practical alternative to the use of alkenyl halides and alkenylboronic acids as cross-coupling partners. A range of amides participate in the cross-coupling, including heterocyclic amides, imides, carbamates, benzamides, and acetamides. Optimization studies established two sets of conditions, best suited to either high pK_a or low pK_a amide substrates. Lower pK_a amide substrates worked best using a dichloromethane solvent system in the presence of 4 Å molecular sieves, 10 mol % Cu(OAc)₂, and 20 mol % N-methylimidazole. Higher pK_a amide substrates worked best using a ‘ligandless’ protocol using a 1:1 dichloromethane/DMSO solvent system in the presence of 4 Å molecular sieves and 10 mol % Cu(OAc)₂. The cross-coupling reactions occur stereospecifically with retention of alkene configuration from the alkenyltrifluoroborate salt. The mild reaction conditions employed are tolerant of various functionalities, including nitro, acetals, alkyl and aryl halides, and α,β-unsaturated carbonyls. Finally, the importance of copper sources and the presence of minor impurities were investigated.     

Synthesis,characterization and spectroscopic studies of pyrazinamide metal complexes

The present paper deals with the synthesis and characterization of Schiff base complexes of pyrazinamide an antitubercular drug. Metals selected for complexation are copper, silver, gold, zinc, mercury, iron and cobalt. The complexes have been suitably synthesized and isolated in pure powdered form. Analytical data agrees with the compositions M(L), M′(L)₂ and M″(L)₂·2H₂O, respectively where M = Ag, M′ = Cu, Au, Zn and Hg and M″ = Fe and Co, ligand metal ratios were also confirmed by monovariation method and Job’s method of continuous variation. Molar conductance values suggest the non ionic nature of the complexes. The tentative structure assigned to the complexes on the basis of stoichiometry and analytical data were further supported by spectral studies viz; IR, NMR, magnetic susceptibility and electronic spectra. A preliminary attempt has also been made to compare the potencies of metal complexes with parent drug. The Cu and Ag complexes are giving encouraging results. Particle size studies further suggest that the drug molecule undergoes reduction in size on complexation.     

Minimization of mass interferences in quadrupole inductively coupled plasma mass spectrometric (ICP-MS) determination of palladium using a flow injection on-line displacement solid-phase extraction protocol

A flow injection on-line displacement solid-phase extraction protocol was employed to minimize mass interferences with determination of palladium by inductively coupled plasma mass spectrometry (ICP-MS). The developed method involved in on-line complexing of Ag⁺ with pyrrolidine dithiocarbamate (PDC), presorption of the resultant Ag–PDC onto a microcolumn packed with the cigarette filter, displacement sorption of Pd²⁺ through loading the sample solution onto the microcolumn due to on-line displacement reaction between Pd²⁺ and the presorbed Ag–PDC, elution of the retained Pd²⁺ with 50 μL of ethanol for on-line ICP-MS detection. Interferences from co-existing heavy metal ions with lower stability of their PDC complexes relative to Ag–PDC were minimized/eliminated. No interferences from 5 mg L^− 1 Zn and 3 mg L^− 1 Pb for ¹⁰⁴Pd, 0.4 mg L^− 1 Cu for ¹⁰⁵Pd, 6 mg L^− 1 Zn and 2 mg L^− 1 Cd for ¹⁰⁶Pd, 6 mg L^− 1 Zn and 3 mg L^− 1 Cd for ¹⁰⁸Pd, and 2 mg L^− 1 Cd for ¹¹⁰Pd were observed for the determination of 100 ng L^− 1 Pd. The enhancement factors of 71–75, sample throughput of 23 samples h^− 1 and detection limits of 2.8–3.5 ng L^− 1 were achieved with the consumption of 3.0 mL of sample solution. The precision (RSD) for eleven replicate determinations of Pd at the 100 ng L^− 1 level was 1.8–2.7%. The developed method was applied to the determination of palladium in rock samples.     

Synthesis of L10 Fe–Pd films by electrodeposition and thermal annealing

Fe–Pd alloy films have been prepared by electrochemical deposition from an alkaline electrolyte containing Fe sulfate, Pd chloride and 5-sulfosalicylic acid onto polycrystalline titanium substrates. The as-deposited films were nanocrystalline and magnetically soft (coercivity ∼ 25 Oe). L1₀ Fe–Pd films with a (1 1 1) preferred orientation were obtained by post-deposition thermal annealing of films with composition about 37 at% Fe in an (Ar + 5% H₂) gas flow at 500 °C. Such films exhibit hard magnetic properties, with a coercivity up to 1880 Oe, and a slightly anisotropic magnetic response, with a larger in-plane remanence. Preliminary magnetic investigations support magnetization switching through pinning of domain walls.