Vanillin cross-linked hydrogel membranes interfacial reinforced by carbon nitride nanosheets for enhanced antibacterial activity and mechanical properties

Biopolymer based hydrogels are highly adaptable, compatible and have shown great potential in biological tissues in biomedical applications. However, the development of bio-based hydrogels with high strength and effective antibacterial activity remains challenging. Herein, a series of Vanillin-cross-linked chitosan nanocomposite hydrogel interfacially reinforced by g-C₃N₄ nanosheet carrying starch-caped Ag NPs were prepared for wound healing applications. The study aimed to enhance the strength, sustainability and control release ability of the fabricated membranes. Starch-caped silver nanoparticles were incorporated to enhance the anti-bacterial activities The fabricated membranes were assessed using various characterization techniques such as FT-IR, XRD, SEM, mechanical testing, Gel fraction and porosity alongside traditional biomedical tests i.e., swelling percentage, moisture retention ability, water vapor transmission rate, oxygen permeability, anti-bacterial activity and drug-release of the fabricated membranes. The mechanical strength reached as high as 25.9 ± 0.24 MPa for the best optimized sample. The moisture retention lied between 87–89%, gel fraction 80–85%, and water vapor transmission up to 104 ± 1.9 g/m²h showing great properties of the fabricated membrane. Swelling percentage surged to 225% for blood while porosity fluctuated between 44% ± 2.1% and 52.5% ± 2.3%. Oxygen permeability reached up to 8.02 mg/L showing the breathable nature of fabricated membranes. The nanocomposite membrane shown excellent antibacterial activity for both gram-positive and gram-negative bacteria with a maximum zone of inhibition 30 ± 0.25 mm and 36.23 ± 0.23 mm respectively. Furthermore, nanoparticles maintained sustainable release following non-fickian diffusion. The fabricated membrane demonstrated the application of inorganic filler to enhance the strength of biopolymer hydrogel with superior properties. These results envisage the potential of synthesized membrane to be used as wound dressing, artificial skin and load-bearing scaffolds.     

Effect of temperature on crystallite size of hydroxyapatite powders obtained by wet precipitation process

In this investigation, HAp powders were synthesized using the wet chemical precipitation technique. The temperature of the heat treatment (80 °C, 120 °C, and 160 °C) and the addition of glutamic acid were the considered process parameters. After the reaction between the precursors calcium nitrate [Ca(NO₃)₂] and ammonium phosphate [(NH₄)H₂PO₄], decantation of the residue, drying, and finally, heat treatment of the residue were done sequentially. X-ray diffraction (XRD) analysis, scanning electron microscope (SEM) observations, and X-ray fluorescence (XRF) analysis were carried out to characterize the synthesized HAp powders. It was found that at a high heat treatment temperature plus the addition of glutamic acid are suitable process parameters to acquire uniform HAp powders with plate morphology and fibers with an average particle size of ～100–200 µm. The Ca/P ratio obtained was like the hydroxyapatite present in the bones in the order of 1.72. This situation can be indicated as an essential advantage in the biocompatibility of the synthesized material. The use of glutamic acid suggests crystal growth in a preferential direction as reported in our previous work. The manufacture of hydroxyapatite, especially in powder, is of great interest in developing additive manufacturing systems for the biomedical market.     

Nanocrystalline hydroxyapatite powders by a chitosan–polymer complex solution route: Synthesis and characterization

Nanocrystalline hydroxyapatite (HAp) powders were successfully synthesized by a simple method using chitosan–polymer complex solution. To obtain HAp nanopowders, the prepared precursor was calcined in air at 400–800 °C for 2 h. The phase composition of the calcined samples was studied by X-ray diffraction (XRD) technique. The XRD results confirmed the formation of HAp phase with a small trace of monotite phase. With increasing calcination temperature, the crystallinity of the HAp increased, showing the hexagonal structure of HAp with the lattice parameter a in a range of 0.94030–0.94308 nm and c of 0.68817–0.68948 nm. The particle sizes of the powder were found to be 55.02–73.36 nm as evaluated by the XRD line broadening method. The chemical composition of the calcined powders was characterized by FTIR spectroscopy. The peaks of the phosphate carbonate and hydroxyl vibration modes were observed in the FTIR spectra for all the calcined powders. TEM investigation revealed that the prepared HAP samples consisted of rod-like nanoparticles having the particle size in the range of 100–300 nm. The corresponding selected-area electron diffraction (SAED) analysis further confirmed the formation of hexagonal structure of HAp.     

Isoconversional Curing and Degradation Kinetics Study of Self-assembled Thermo-responsive Resin System Bearing Oxime and Iminium Groups

This paper demonstrates synthesis of a self-assembled resin system containing p-acetylpyridine oxime, formaldehyde and p-methoxyacetophenone moieties in main chain and thermally cross-linkable periphery oxime groups, and application as antimicrobial coating in biomedical applications. The post-polymerization conversion from oxime into iminium groups was observed by heating scan, with exothermic peaks being at 194 to 247°C. Various degradation models including the Flynn-Wall-Ozawa (F-W-O), Kissinger-Akahira-Sunose (K-A-S), Tang (T) and Friedman (F) methods were employed to check the thermal stability of self-assembly by computing apparent activation energy. It has also exhibited strong biocidal properties against gram-positive and gram-negative bacteria, and fungi until the macrochain retains some positive charge. The obtained results prove that the structure of links, which combine the hydrophobic pyridine rings with the hydrophilic iminium groups, is responsible for the high biocidal activity of the resin system.     

Glucosamine-functionalized silver glyconanoparticles: characterization and antibacterial activity

We report the analytical and in vitro antibacterial activity of glucosamine-functionalized silver glyconanoparticles. Morphological characterization ensured the surface topography and particle size distribution of both silver and glucosamine–silver nanoparticles. Surface plasmon resonance of both types of nanoparticle was determined from UV–visible spectroscopy using four different sample concentrations (10–40 μL). The resulting functionalized glyconanoparticles show maximum absorbance with a red shift of 30 ± 5 nm (390–400 nm) from their initial absorbance (425–430 nm). FT-Raman and ¹H-NMR spectroscopic measurement confirmed the surface functionalization of glucosamine on the silver surface through the carbonyl group of a secondary amide linkage (–NH–CO–), elucidated by the conjugation of N-hydroxysuccinimide (NHS)-terminated silver nanoparticles and the amino group of glucosamine. Antimicrobial experiments with well-characterized silver nanoparticles (AgNPs) and glucosamine-functionalized silver nanoparticles (GlcN-AgNPs) demonstrate that GlcN-AgNPs have similar and enhanced minimum inhibitory concentration (MIC) against eight gram-negative and eight gram-positive bacteria compared with AgNPs. MIC data shows that Klebsiella pneumoniae (ATCC 700603) and Bacillus cereus isolate express high levels of inhibition, with the quantity and magnitude of inhibition being higher in the presence of GlcN-AgNPs.     

Environmental remediation by hydroxyapatite: Solid state synthesis utilizing waste chicken eggshell and adsorption experiment with Congo red dye

This study reports the adsorption efficacy of hydroxyapatite (HAp) for removing Congo Red (CR) dye from aqueous solution. HAp was synthesized utilizing chicken eggshell as a precursor of Ca source. Solid state synthesis method was implemented which comprised calcination at 950 °C (E-HAp950). XRD analysis confirmed the formation of bi-phasic HAp with 15.5% of β-TCP. Elemental composition was evaluated by XPS and EDX analysis. FESEM analysis revealed the particles are of plate and spherical shaped also confirmed by the TEM images. DLS particle size, zeta potential, BET surface area and point of zero charge were also evaluated. Adsorption efficacy of E-HAp950 for removing CR was evaluated by batch adsorption experiment. Maximum adsorption capacity (q_max) was found to be 9.64 mgg⁻¹ which was best explained by the non-linear fitting (R² = 0.98) of Langmuir isotherm. Adsorption kinetics profusely followed pseudo second order kinetic model (R² = 0.999) with q_{e (experimental)} being very much closer to q_{e (calculative)} for this model. Thus, hydroxyapatite prepared by utilizing eggshell waste through solid state method has the potential to remove toxic dyes.     

Biological Applications of Synthesized ZnO Nanoparticles Using Pleurotus djamor Against Mosquito Larvicidal,Histopathology, Antibacterial,Antioxidant and Anticancer Effect

The present study pertained to biosynthesis, characterization and biomedical application (larvicidal, histopathology, antibacterial, antioxidant and anticancer activity) of Zinc oxide nanoparticles (ZnONPs) from Pleurotus djamor. The synthesized NPs were characterized using spectral and microscopic analyses and further confirmed by UV–Visible spectrophotometer with apeak of 350 nm. The ZnONPs showed strong antioxidant property (DPPH, H₂O₂ and ABTS⁺ radical assay) and expressed good larval toxicity against Ae. aegypti and Cx. quinquefasciatus (IVth instar larvae) with the least LC₅₀ and LC₉₀ values (10.1, 25.6 and 14.4, 31.7 mg/l) after 24 h treatment, respectively. We noticed the morphological changes (damaged anal papillae area and the cuticle layers) in the treated larvae. For the antibacterial assay, the highest growth inhibition zone was recorded in C. diphteriae (28.6?±?0.3 mm), followed by P. fluorescens (27?±?0.5 mm) and S. aureus (26.6?±?1.5 mm). The in vitro cytotoxicity assay depicted a significant level of cytotoxic effects (LC₅₀ values 42.26 μg/ml) of ZnONPs against the A549 lung cancer cells, even at low dose. The overall findings of the study suggest that P. djamor had the ability for the biosynthesis of ZnONPs and could act as an alternative biomedical agent for future therapeutic applications in medical avenues.

     

Fabrication,rheological analysis,and in vitro characterization of in situ chemically cross‐linkable thermogels as controlled and prolonged drug depot for localized and systemic delivery

5‐Fluorouracil (5‐FU) is widely used against many types of solid cancer in clinics. However, because of its limitations such as short half‐life, poor oral absorption and rapid clearance by dihydropyrimidine dehydrogenase have limited its applications. In current study, new in situ chemically grafted thermogels for prolonged drug release are formed on the basis of poloxamer 407 (PF127) and carboxymethyl chitosan (CMCS) using glutaraldehyde as cross‐linking agent. The phase transition from sol to gel state at body temperature was confirmed by tube titling, rheological analysis, and optical transmittance determinations. Swelling and drug release experiments conducted at various pH and temperature demonstrated that developed formulations are thermoresponsive with maximum swelling and release below critical gelation temperature (CGT) (pH 7.4, 25°C). Cells growth inhibition study confirmed the biocompatibility of thermogels against L929 cell lines. Methyl thiazolyl tetrazolium (MTT) assay confirmed that 5‐FU–loaded thermogels have the potential to cause cells death against HeLa and MCF‐7 cancer lines. The IC₅₀ values calculated for pure 5‐FU solution (27 ± 0.81 μg/mL for HeLa and 24 ± 0.58 μg/mL for MCF‐7) were found higher in comparison with 5‐FU–loaded thermogels, against HeLa (17 ± 0.39 μg/mL) and MCF‐7 (14 ± 0.67 μg/mL). Fourier transform infrared (FTIR) confirmed the new structure formation and chemical grafting between PF127 and CMCS. Thermogravimetric (TG) and differential scanning calorimetry (DSC) analyses proved the phase transition around physiologic temperature range, while scanning electron microscopy (SEM) analysis displayed the presence of connected pores in the cross section of thermogels facilitating the uptake of solvents and drug particles. Altogether, results concluded that developed chemically grafted thermogels can be used in vivo for prolonged drug release after subcutaneous administration.     

Thiol modified chitosan-silica nanohybrid for antibacterial,antioxidant and drug delivery application

Chitosan exhibits great versatility in various biomedical fields and mesoporous silica nanoparticles have emerged as an interesting material in biomedical areas owing to their outstanding physio-chemical properties. The combination of inorganic silica and organic polymer such as chitosan, make them suitable for a wide range of biomedical applications. Here, we have explored the benefits of chitosan and silica by synthesizing chitosan-silica nanohybrid. In the synthesis of chitosan-silica (CS–Si) nanohybrid, chitosan is modified by thioglycolic acid and mesoporous silica MCM-41(Mobil Composition of Matter number 41) is functionalized by 3-(trimethoxysilyl)-1-propane thiol (TMSP). The modified chitosan and thiol functionalized MCM-41(inorganic network) is then linked through disulfide bond by oxidation process or oxidative coupling, resulting in the formation of inorganic-organic hybrid material. The hybrid material was characterized by FTIR, Raman, XRD, TGA, Zeta potential, EDX, Proton NMR and SEM techniques. The antibacterial results indicated that gram-negative (E. coli) bacteria exhibit better inhibition zone than gram-positive (B. subtilis) bacteria. The DPPH scavenging capability of synthesized hybrid was found to be 68%. The drug (quercetin) encapsulation efficiency of hybrid material was calculated to be 92.38% and more drug releases in acidic medium (pH 5.0) than at pH 7.4, so we can conclude that hybrid material shows pH-dependent drug releasing behavior. The results show that synthesized nano-hybrid material possess good antibacterial and antioxidant activities and is also a good nanocarrier for drug delivery application.     

Antibacterial studies of bio-functionalized carbon decorated silver nanoparticles (AgNPs)

In the present report, Lemon juice (bio-extract) extract was efficaciously used for the synthesis of bio-functionalized silver nanoparticles (Ag-1, Ag-2 & Ag-3 NPs) and decorated with carbon material obtained from mustard oil. The morphology, size, crystal structure, formation and interaction were studied by means of innumerable analytical methods including scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. The XRD results approve the formation of AgNPs with face-centered cubic (fcc) lattice. The XRD results also exhibit some unassigned peaks which might be due to the presence of bio-organic materials on the surface of AgNPs. The bands observed from the IR spectra showing the involvement of biomolecules onto the surface of silver nanoparticles. Mostly citric acid plays a major role in bio-reduction, capping agent, and stabilization of silver ions. We attained maximal inhibition zone (2.10 ​± ​0.05 and 2.03 ​± ​0.027) counter to gram-negative bacteria K. pneumoniae and P. bacilli with Ag-3 respectively, but lowest inhibition zone (1.27 ​± ​0.22) contrary to S. aureus as a gram-positive bacteria with Ag-2.     

The Syntheses and Characterization of Molecularly Imprinted Polymers for the Controlled Release of Bromhexine

Imprinted polymers are now being increasingly considered for active biomedical uses such as drug delivery. In this work, the use of molecularly imprinted polymers (MIPs) in designing new drug delivery devices was studied. Imprinted polymers were prepared from methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linker), and bromhexine (as a drug template) using bulk polymerization method. The influence of the template/functional monomer proportion and pH on the achievement of MIPs with pore cavities with a high enough affinity for the drug was investigated. The polymeric devices were further characterized by FT-IR, thermogravimetric analysis, scanning electron microscopy, and binding experiments. The imprinted polymers showed a higher affinity for bromhexine and a slower release rate than the non-imprinted polymers. The controlled release of bromhexine from the prepared imprinted polymers was investigated through in vitro dissolution tests by measuring absorbance at λ _max of 310 nm by HPLC-UV. The dissolution media employed were hydrochloric acid at the pH level of 3.0 and phosphate buffers, at pH levels of 6.0 and 8.0, maintained at 37.0 and 25.0 ± 0.5 °C. Results from the analyses showed the ability of MIP polymers to control the release of bromhexine In all cases The imprinted polymers showed a higher affinity for bromhexine and a slower release rate than the non-imprinted polymers. At the pH level of 3.0 and at the temperature of 25 °C, slower release of bromhexine imprinted polymer occurred.     

Loading of praziquantel in the crystal lattice of solid lipid nanoparticles

Praziquantel (PZQ) is the drug of choice for oral treatment of schistosomiasis and other fluke infections that affect humans. Its low oral bioavailability demands the development of innovative strategies to overcome the first pass metabolism. In this article, solid lipid nanoparticles loaded with PZQ (PZQ-SLN) were prepared by a modified oil-in-water microemulsion method selecting stearic acid as lipid phase after solubility screening studies. The mean particle size (Z-Ave) and zeta potential (ZP) were 500 nm and −34.0 mV, respectively. Morphology and shape of PZQ-SLN were analysed by scanning electron microscopy revealing the presence of spherical particles with smooth surface. Differential scanning calorimetry suggested that SLN comprised a less ordered arrangement of crystals and the drug was molecularly dispersed in the lipid matrix. No supercooled melts were detected. The entrapment efficiency (EE) and loading capacity of PZQ, determined by high performance liquid chromatography, were 99.06 ± 0.3 and 17.48 ± 0.05, respectively. Effective incorporation of PZQ into the particles was confirmed by small angle X-ray scattering revealing the presence of a lipid lamellar structure. Stability parameters of PZQ-SLN stored at room temperature (25 °C) and at 4 °C were checked by analysing Z-Ave, ZP and the EE for a period of 60 days. Results showed a relatively long-term physical stability after storage at 4 °C, without drug expulsion.     

Humic acid particle embedded super porous gum Arabic cryogel network for versatile use

Super porous gum Arabic (GA) cryogels were synthesized by crosslinking of natural GA with divinyl sulfone at cryogenic conditions, −20°C for potential biomedical applications. Humic acid (HA) nanoparticles were also prepared by using degradable and biocompatible crosslinkers such as trimethylolpropane triglycidyl ether, poly(ethylene glycol) diglycidyl ether, and trisodium trimetaphosphate in a single step and then entrapped within GA cryogel network as GA/HA particle cryogel. Furthermore, GA/HA cryogel was used as a template for Ag, Cu, and Fe nanoparticle preparation, and their antimicrobial properties were tested against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis strains. The minimum inhibition concentration values of Ag and Cu nanoparticle‐loaded GA/HA cryogel composites were determined as 10 mg mL⁻¹. Furthermore, the blood compatibility tests such as hemolysis and blood clotting indexes were determined for GA cryogels and found to be more compatible with 0.08 ± 0.01% hemolysis and 89.4 ± 6.1 blood clotting values, whereas the hemolysis of the Ag, Cu, and Fe nanoparticle‐loaded GA/HA Ag, Cu, and Fe metal nanoparticle cryogel composites decreased in the order of Fe > Cu > Ag nanoparticles.     

The Effect of pH on Continuous Biohydrogen Production from Swine Wastewater Supplemented with Glucose

The effect of pH on hydrogen production from liquid swine manure supplemented with glucose by a mixed culture of fermentative bacteria in an anaerobic sequencing batch reactor was evaluated in this study. At 37 ± 1 °C, five pH values ranging from 4.7 to 5.9 at an increment of 0.3 were tested at a hydraulic retention time (HRT) of 16 h. The results showed that at this HRT, the optimal pH for hydrogen production was 5.0, under which the biogas comprised 33.57 ± 5.65% of hydrogen with a production rate of 8.88 ± 2.94 L-H₂/day and a yield of 1.48 ± 0.49 L-H₂/L liquid swine manure. The highest biomass concentration, highest butyric acid to acetic acid ratio, lowest propionic acid concentration, and the best stability were all found at pH 5.0, while the highest CH₄ productivity was found at pH 5.9. For efficient hydrogen production, oxygen content should be controlled under 2%, beyond which an inverse linear relationship (R ² = 0.986) was observed.     

Synthesis and characterization of new fluorinated photoactive polyamides based on xanthene pendant: Evaluation of antibacterial and heavy metal ions removal behavior

A series of novel organosoluble polyamides (PAs) bearing different functional groups such as flexible ether, substituted imidazole, and xanthene rings and electron-withdrawing CF₃ groups were synthesized from diamines and various dicarboxylic acids. The structures of diamines and PAs were fully characterized by elemental analysis, Fourier transform infrared spectroscopy, and proton nuclear magnetic resonance spectroscopy. The PAs showed good solubility in aprotic and polar organic solvents, with high thermal stability exhibiting the glass transition temperatures (T_gs) and 10% weight loss temperatures (T₁₀%) in the range of 184–277°C and 410–480°C in N₂ atmosphere, respectively. These polymers showed fluorescence emission upon irradiation with UV light. Diamine compounds and two of synthesized polymers were also screened for antibacterial activity against gram-positive and gram-negative bacteria, and the obtained results for all four combinations showed good inhibition. Extraction capability for heavy metal ions such as Cr³⁺, Pb²⁺, Hg²⁺, Cd²⁺, and Co²⁺ from aqueous solutions was also tested at 25°C and pH 7–8.     

Application of Artificial Neural Network and Particle Swarm Optimization for modelling and optimization of biosorption of Lead(II) and Nickel(II) from wastewater using dead cyanobacterial biomass

Removal of heavy metals through biosorption using biomass offers several advantages over other conventional techniques such as low cost, high efficiency, environmentally friendly, etc. In the present article, biosorption of Nickel(II) and Lead(II)was investigated using dried biomass of cyanobacterial consortium. OFAT (one-factor-at-a-time) analysis was used to assess the effect of input parameters on the removal of potentially toxic elements by varying initial metal ion concentration (2–10 mgL⁻¹), adsorbent dose (0.1–1.0 gL^-1), pH (for Pb(II): 2–6, for Ni(II): 2–8) and temperature (25°C–45°C) individually, at constant shaking speed of 150 ​rpm. Results showed that removal using biomass attained highest values in as short time as 15 ​min. The investigations also showed the removal is highly effective at lower initial concentrations of heavy metals. Maximum removal of Lead(II) (87.27 ​± ​1.75%) and Nickel(II) (92.57 ​± ​0.77%) was obtained at pH 6 and 45°C and at pH 7 and 25°C, respectively, within 15 ​min with 0.1 gL^-1 biomass. Both the Langmuir model and Freundlich model were seen to fit the equilibrium data. Further, Artificial Neural Network was used to model the biosorption process. Subsequently, Particle Swarm Optimization was applied to optimize the operating conditions for the removal of both the metals.     

High antimicrobial,cytotoxicity, and catalytic activities of biosynthesized selenium nanoparticles using Crocus caspius extract

The green method for synthesizing various nanoparticles is defined as one of the environmentally friendly, promising, and safer technologies. In our study, the selenium nanoparticles (C@SeNPs) were synthesized by Crocus caspius aqueous extract. The existence of functional groups involved in the synthesis of SeNPs that were connected with bioactive compounds was confirmed by the FT-IR spectrum. The TGA curve confirmed about 60 % weight loss between 260 and 500 °C, implying biomolecules surround the metallic core. XRD analysis displayed the trigonal nature of SeNPs. The SEM and TEM images of C@SeNPs demonstrated semi-spherical in shape. EDX analysis identified the intense bond of selenium. Biosynthesized C@SeNPs were discovered to have considerable antioxidant and antibacterial activities on several strains of bacteria. An IC₅₀ value of 67.63 ± 2.5 μg/ml was obtained for their iron-chelating activity. In addition, the fabricated SeNPs have a strong growth inhibitory effect on MCF-7 and AGS cancer cells. C@SeNPs exhibited effective antifungal activity against tested fungi strains and antileishmanial activity against promastigotes. Besides, our NPs were able efficiently to degrade methylene blue (MB) dye in the presence of NaBH₄. Thus, the current findings suggest the benefits of using green technology to synthesize SeNPs with potential activity.     

Assessment on in vitro medicinal properties and chemical composition analysis of Solanum virginianum dried fruits

The study was aimed to screen the presence of phytoconstituents and determine distinct in vitro medicinal traits of aqueous and ethanolic extracts of Solanum virginianum dried fruits. Aqueous and ethanolic extract showed total phenolic content of 207.5 ± 0.16 and 268.4 ± 0.42 GAE/mg, respectively. Likewise, total flavonoid content of 50.12 ± 0.39 and 192.88 ± 0.27 QE/mg was estimated for the aqueous and ethanolic extract, respectively. In vitro antibacterial, antioxidant, α-amylase inhibition, anti-inflammatory, and anticancer attributes of extracts were assessed using standard protocols. The antibacterial traits of both the extracts were assessed against certain pathogenic bacteria which exhibited maximum zone of inhibition of 22.3 ± 0.6 mm against Staphylococcus aureus. Antioxidant tests showed not only significant scavenging of DPPH, superoxide, hydroxyl, and ABTS^●+ radicals but also estimated ferric reducing power and phosphomolybdenum reduction activities of extracts in a concentration dependent manner. The aqueous extract (54.12 ± 0.44–86.80 ± 0.27%) depicted higher rate of α-amylase inhibition than ethanolic extract (23.07 ± 0.47–81.61 ± 0.43%) at distinct concentrations. Similarly, the aqueous extract protected the haemolysis (46.19 ± 0.14–66.21 ± 0.17%) effectively as compared to the ethanolic extract (12.67 ± 0.19–38.03 ± 0.41%). The aqueous and ethanolic extract showed cytotoxicity against HepG2 cell lines in the range of 32.23 ± 0.34–54.82 ± 0.26% and 49.25 ± 0.38–73.2 ± 0.3%, respectively. Additionally, the GC–MS analysis confirmed the availability of total 15 predominant bioactive constituents in both extracts. Findings of this context indicated pronounced applications of S. virginianum fruits as future therapeutic.     

Synthesis and properties of poly(isosorbide 2,5-furandicarboxylate-co-ε-caprolactone) copolyesters

Bio-based poly(isosorbide 2,5-furandicarboxylate-co-ε-caprolactone) (PIFCL) copolyesters were synthesized from 2,5-furandicarboxylic acid, isosorbide and ε-caprolactone. The obtained copolyesters were characterized by ¹H NMR, ¹³C NMR, intrinsic viscosity, GPC, DSC, TGA and tensile testing. The NMR characterization results confirmed the insertion of lactones units into poly(isosorbide 2,5-furandicarboxylate) (PIF) chains. All PIFCL copolyesters were amorphous with T_{D, 5%} higher than 300 °C. The glass transition temperatures of PIFCLs with FDCA molar ratio from 74% to 45% were within the range of 132.1 °C and 72.4 °C. Tensile testing revealed that introduction of ε-caprolactone into PIF chain imparted PIFCL with excellent mechanical performance, typically, PIFCL polyseter with FDCA molar ratio of 45% had a Young's modulus 858 ± 92 MPa, a tensile strength 44 ± 4 MPa and an elongation at break 480 ± 45%.     

Green synthesis of RGO-ZnO mediated Ocimum basilicum leaves extract nanocomposite for antioxidant,antibacterial, antidiabetic and photocatalytic activity

Green chemistry of nanomaterials from synthesis to diverse biomedical applications is a discussion of town in the current scientific scenario. In this work, Ocimum basilicum leaves extract was utilized as the reducing agent in the synthesis of ZnO nanoparticles. Green synthesized ZnO NPs mediated via Ocimum basilicum extract were decorated on the reduced graphene oxide (RGO) sheet by the simple one-step method. The prepared green synthesized RGO-ZnO nanocomposites (NCs) were characterized via the X-ray diffractometer. The average crystallite size of ZnO was 25 nm which confirmed the wurtzite hexagonal structure of ZnO. The scanning Electron Microscopy technique confirmed the spherical morphology of particle size of 31 nm. Further, Fourier Transform Infrared Spectroscopy confirms the Zn-O bond stretching in the RGO-ZnO NCs. Antioxidant activity of the green synthesized Ocimum basilicum ZnO NPs and RGO-ZnO NCs were performed by DPPH scavenging activities and found the dose-dependent. RGO-ZnO effectively inhibited the α-amylase and α-glucosidase for in vitro antidiabetic activities. Moreover, RGO-ZnO NCs showed the antibacterial potential with increasing concentration against the gram-positive (Cocci) and gram-negative (E. coli) bacterial strains. In Photocatalytic activity, the ZnO NPs and RGO-ZnO NCs were utilized as the catalyst and degraded the Rh-B dye 91.4% and 96.7% under UV–visible light. Overall, RGO-ZnO NCs showed better results in antibacterial, antidiabetic activity as well as photocatalytic activity against the pure ZnO NPs. Hence, RGO-ZnO nanocomposites have demonstrated the opportunity to be an entrancing material for photocatalysis and biological studies.