Physical properties and thermal behavior of reconstituted tobacco sheet with precipitated calcium carbonate added in the coating process

Addition of precipitated calcium carbonate (PCC) to cellulosic products can reduce production costs and modify their physical properties. This study investigated the effects of adding PCC on the properties of reconstituted tobacco sheet (RTS), a cellulosic product. Scanning electron microscopy (SEM) analysis showed that adding PCC to the coating could modify the surface microstructure of RTS. With increasing PCC addition, the strength and tar release per cigarette of RTS decreased. However, the filling capacity, bulk, and CO release content in the mainstream smoke reached optimal values when the proportion of PCC in the coating was 8%. Thermogravimetry (TG) and differential thermogravimetry (DTG) analysis indicated that the main thermal pyrolysis stage occurred in the range of 200–400 °C, similar to cellulosic components. The Coats–Redfern equation was used to analyze the thermal pyrolysis mechanism. The fitting results showed that, in the range of 200–280 °C, the best fit model for RTS with 4 or 8% PCC was diffusion-controlled reaction (D1) with fitting correlation coefficient (r ²) of 0.9630 and 0.9576, respectively. Meanwhile, in the range of 280–400 °C, the most reliable fitting model for RTS with 4% PCC was chemical reaction (F2) with r ² = 0.9681. One reaction model could not describe the thermal pyrolysis of RTS with 12% PCC in the main decomposition stage. The thermal kinetic parameters suggested that addition of PCC to RTS coatings could modify the thermal pyrolysis mechanism, but did not change the peak temperatures in the main thermal decomposition stage. This study demonstrates that addition of PCC to RTS coating is a promising method to improve its quality.     

Surface energetics of calcium carbonates using inverse gas chromatography

Various calcium carbonate samples were characterized by inverse gas chromatography (IGC) at infinite dilution. The interactions between the samples and hydrocarbon probes, C₅–C₁₀ were related to the retention volume in gas chromatographic experiments. The surface energetics of chalk, marble and precipitated calcium carbonate (PCC) were determined in terms of the apolar component of the surface free energy γ_S^LW and the differential enthalpy of adsorption, −ΔH_A^∘. These results were evaluated with respect to bulk chemical composition, BET surface area and pore structure. The results suggest that physi- and chemisorbed water bound at surface sites and within the pore structure significantly influence the surface properties of the calcium carbonates. The values of γ_S^LW and −△H_A^∘ after redeposition of the water adlayer suggested reversibility of the water sorption process and the resulting changes in the energetics of the surfaces. Values of γ_S^LW for the chalk samples in the initial state were 140–180 mJ m⁻², whereas the marble and PCC were ≈55mJ m⁻². Removal of bound and pore water by heating at elevated temperatures caused a progressive increase in the γ_S^LW to ≈250 mJ m⁻² for the PCC sample. The γ_S^LW of the chalk sample also increased but to a much lesser extent. △H_A^∘ values for the samples followed the trend chalk>marble>PCC.     

Lipid Profiles of the Heads of Four Shrimp Species by UPLC–Q–Exactive Orbitrap/MS and Their Cardiovascular Activities

Lipids are key factors in nutrition, structural function, metabolic features, and other biological functions. In this study, the lipids from the heads of four species of shrimp (Fenneropenaeus chinensis (FC), Penaeus japonicus (PJ), Penaeus vannamei (PV), and Procambarus clarkia (PCC)) were compared and characterized based on UPLC–Q–Exactive Orbitrap/MS. We compared the differences in lipid composition of four kinds of shrimp head using multivariate analysis. In addition, a zebrafish model was used to evaluate pro-angiogenic, anti-inflammatory, anti-thrombotic, and cardioprotective activities of the shrimp head lipids. The lipids from the four kinds of shrimp head had different degrees of pro-angiogenic activities, and the activities of PCC and PJ shrimp lipids were more significant than those of the other two species. Four lipid groups displayed strong anti-inflammatory activities. For antithrombotic activity, only PCC (25 μg/mL) and PV (100 μg/mL) groups showed obvious activity. In terms of cardioprotective activity, the four kinds of lipid groups significantly increased the zebrafish heart rhythms. The heart distances were shortened, except for those of the FC (100 μg/mL) and PJ (25 μg/mL) groups. Our comprehensive lipidomics analysis and bioactivity study of lipids from different sources could provide a basis for the better utilization of shrimp.     

RuO4-catalyzed oxidative polycyclization of squalene. Determination of the configuration of the penta-tetrahydrofuranyl diol product

The configuration of the penta-tetrahydrofuranyl diol (penta-THF) product obtained by a single-step, RuO₄-catalyzed oxidative polycyclization of squalene, has been determined as cis-threo-cis-threo-trans-threo-trans-threo-trans. The cis-cis-trans-trans-trans sequence for the five contiguous THF rings has been established through extensive 2D-NMR spectroscopic studies carried out both on the intact molecule and on some of its derivatives, including the oxidative cleavage products obtained by degradation of the penta-THF with PCC/AcOH. Four different chemical approaches were devised to determine each of the four threo relationships within each carbon pair connecting adjacent THF rings in the molecule. To this aim, studies have been carried out either on some intermediates of the process leading to penta-THF, obtained by stopping the oxidation of squalene prior to completion, or on a degradation product of the penta-THF, obtained from the latter through a bidirectional double oxidative degradation with PCC.     

Hetero-Diels-Alder reaction of photochemically generated α-hydroxy-o-quinodimethanes with trifluoromethyl ketones

Hetero-Diels-Alder reaction of α-hydroxy-o-quinodimethanes photochemically generated from o-tolualdehydes with trifluoromethyl ketones gave a mixture of hemiacetals and hydroxyaldehydes in fairly good yields. Their subsequent oxidation with PCC provided 1-isochromanones as formal oxidative [4+2] cycloaddition products. In contrast, similar reaction of aromatic ketones such as o-methylbenzophenone, 1-indanone, and α-tetralone gave exclusively the corresponding ketones having (trifluoromethyl)methylol groups at the o-position.     

The influence of wavelength of light on cyanobacterial asymmetric reduction of ketone

Asymmetric reduction of ketone by a microalga, Synechocystis sp. PCC 6803, smoothly afforded to the corresponding (S)-alcohol in excellent enantiomeric excess by the aid of illumination of orange and red LED lights which are more effective than other LEDs such as blue and green lights. The condition under minimum energy flux (1.0 W/m²) of orange-red LEDs is enough for the reduction of ketone, and it seems that orange-red light rather effectively forwarded the regeneration of coenzyme.     

Synthesis of chiral ortho-(p-tolylsulfinyl) benzyl ketones

(S)-ortho-(p-Tolylsulfinyl)benzyl alkyl (and aryl) ketones 1a-e were prepared in good yields by reaction of esters or nitriles with the lithium benzyl carbanion derived from 2-(p-tolylsulfinyl) methylbenzene. α-Methylbenzyl ketones 2 were prepared as ca. 1:1 diastereoisomeric mixtures by methylation of the unsubstituted ketones 1 with NaH/MeI. The use of the ethylbenzene derivative as the starting material afforded complex mixtures. The obtention of pure (S,(S)S)-2 diastereoisomers could be attained in good yields by oxidation with PCC of the alcohols (epimeric mixtures at the hydroxylic carbon) obtained from reactions of aldehydes with the lithium carbanion derived from 2-(p-tolylsulfinyl)ethylbenzene.     

Total synthesis of the marine polypropionates,siphonarienal, siphonarienone,and pectinatone

The synthesis of the marine natural products, siphonarienal, siphonarienone, and pectinatone is described employing desymmetrization strategy to create three consecutive stereogenic centers. The key intermediate 7 was made by asymmetric hydroboration of the known meso-olefin using (?)-IPC₂BH followed by PCC and Baeyer-Villiger oxidation reactions.     

Antibody-recruiting protein-catalyzed capture agents to combat antibiotic-resistant bacteria

Antibiotic resistant infections are projected to cause over 10 million deaths by 2050, yet the development of new antibiotics has slowed. This points to an urgent need for methodologies for the rapid development of antibiotics against emerging drug resistant pathogens. We report on a generalizable combined computational and synthetic approach, called antibody-recruiting protein-catalyzed capture agents (AR-PCCs), to address this challenge. We applied the combinatorial protein catalyzed capture agent (PCC) technology to identify macrocyclic peptide ligands against highly conserved surface protein epitopes of carbapenem-resistant Klebsiella pneumoniae, an opportunistic Gram-negative pathogen with drug resistant strains. Multi-omic data combined with bioinformatic analyses identified epitopes of the highly expressed MrkA surface protein of K. pneumoniae for targeting in PCC screens. The top-performing ligand exhibited high-affinity (EC₅₀ ∼50 nM) to full-length MrkA, and selectively bound to MrkA-expressing K. pneumoniae, but not to other pathogenic bacterial species. AR-PCCs that bear a hapten moiety promoted antibody recruitment to K. pneumoniae, leading to enhanced phagocytosis and phagocytic killing by macrophages. The rapid development of this highly targeted antibiotic implies that the integrated computational and synthetic toolkit described here can be used for the accelerated production of antibiotics against drug resistant bacteria.

Antibody-recruiting protein-catalyzed capture agent (AR-PCCs) are a new class of all-synthetic and highly targeted antibiotics that recruit endogenous immune responses to eliminate drug-resistant microbes.     

Visualizing tributyltin (TBT) in bacterial aggregates by specific rhodamine-based fluorescent probes

Here we present the first examples of fluorescent and colorimetric probes for microscopic TBT imaging. The fluorescent probes are highly selective and sensitive to TBT and have successfully been applied for imaging of TBT in bacterial Rhodobacter ferrooxidans sp. strain SW2 cell-EPS-mineral aggregates and in cell suspensions of the marine cyanobacterium Synechococcus PCC 7002 by using confocal laser scanning microscopy.     

Improved Photodegradation of Organic Contaminants Using Nano‐TiO2 and TiO2–SiO2 Deposited on Portland Cement Concrete Blocks

The photocatalytic activity of TiO₂ nanoparticles (nano‐TiO₂) and its hybrid with SiO₂ (nano‐TiO₂–SiO₂) for degradation of some organic dyes on cementitious materials was studied in this work. Nanohybrid photocatalysts were prepared using an inorganic sol–gel precursor and then characterized using XRD, SEM and UV–Vis. The grain sizes were estimated by Scherrer's equation to be around 10 nm. Then, a thin layer was applied to Portland cement concrete (PCC) blocks by dipping them into nano‐TiO₂ and nano‐TiO₂–SiO₂ solution. The efficiency of coated PCC blocks for the photocatalytic decomposition of two dyes, Malachite Green oxalate (MG) and Methylene Blue (MB), was examined under UV and visible irradiation and then monitored by the chemical oxygen demand tests. The results showed that more than 80% and 92% of MG and MB were decomposed under UV–Vis irradiation using blocks coated with nano‐TiO₂–SiO₂. TiO₂/PCC and TiO₂–SiO₂/PCC blocks showed a significant ability to oxidize dyes under visible and UV lights and TiO₂–SiO₂/PCC blocks require less time for dye degradation. Based on these results, coated blocks have increased photocatalytic activity which can make them commercially accessible photocatalysts.     

Synthesis of new di- and triamine diosgenin dimers

In this study, a high yield synthesis of symmetrical steroidal polyamine dimers was achieved by the dimerization of (25R)-3β-acetoxyfurost-5-en-26-al via several di- and triamine linkers under mild conditions. To ensure the dimerization via E-E ring, the hydroxyl group in diosgenin was protected by an acetyl group. The important step is opening the spiroketal moiety using NaCNBH₃/AcOH to furnish the primary alcohol at C-26, followed by oxidation using PCC/CH₂Cl₂ to synthesize the desired aldehyde. Finally, reductive amination with diaminopropane, diaminobutane, diaminohexane, and spermidine using Na(OAc)₃BH as reducing agent, afforded the required four dimers.     

An expedient one-pot sequential three-component reaction for the stereoselective synthesis of functionalized spiro-sulfamidate imine fused δ-lactone scaffold

A convenient one-pot three-component transformation between 4-aryl-5H-1,2,3-oxathiazole-2,2-dioxides, trans-β-aryl/alkyl-substituted acroleins and paraformaldehyde in CH₂Cl₂ at room temperature in the presence of commercially available l-proline and DBU as the organocatalysts has been successfully realized for the first time via a Michael-condensation-hemiacetalization sequence process. The resulting functionalized spiro-sulfamidate imine fused δ-lactone scaffolds were obtained via in situ oxidation of spiro-δ-lactols by PCC in good to excellent overall yields and moderate to good diastereomeric ratio (up to ?5:1 dr). Moreover, a synthetically useful intermediate trans–cis-β-amino-α-azido compound has been successfully achieved through our procedure.     

Surface Display of Bacterial Metallothioneins and a Chitin Binding Domain on Escherichia coli Increase Cadmium Adsorption and Cell Immobilization

To increase the level of adsorption of cadmium ions to the surface of Escherichia coli, we fused cyanobacterial metallothioneins, SmtA (from Synechococcus elongatus PCC 3601) and MtnA (from Synechococcus vulcanus) to the E. coli cell surface using a Lpp??-OmpA-based display system. E. coli strains expressing Lpp??-OmpA?CSmtA-linker-ChBD (chitin-binding domain from Bacillus pumillus SG2 chitinase S; chiS) and Lpp??-OmpA?CMtnA-linker-ChBD on their surface adsorbed more cadmium compared to the E. coli cells expressing only the Lpp??-OmpA-linker-ChBD hybrid. These constructs also were bound to chitin through their chitin-binding domain, allowing them to be immobilized on a chitin matrix. We assessed surface presentation of Lpp??-OmpA?CSmtA-linker-ChBD, Lpp??-OmpA?CMtnA-linker-ChBD, and Lpp??-OmpA-linker-ChBD using immunostaining. The Lpp??-OmpA?CSmtA-linker-ChBD chimera adsorbed metal and was bound to chitin with the highest efficiency compared to the other chimeras, suggesting that it is an effective bioadsorbent. This is the first example of coupling metal adsorption with cell immobilization using a whole-cell bioadsorbent.     

Validation of multivariate screening methodology. Case study: Detection of food fraud

Multivariate screening methods are increasingly being implemented but there is no worldwide harmonized criterion for their validation. This study contributes to establish protocols for validating these methodologies. We propose the following strategy: (1) Establish the multivariate classification model and use receiver operating characteristic (ROC) curves to optimize the significance level (α) for setting the model’s boundaries. (2) Evaluate the performance parameter from the contingency table results and performance characteristic curves (PCC curves). The adulteration of hazelnut paste with almond paste and chickpea flour has been used as a case study. Samples were analyzed by infrared (IR) spectroscopy and the multivariate classification technique used was soft independent modeling of class analogies (SIMCA). The ROC study showed that the optimal α value for setting the SIMCA boundaries was 0.03 in both cases. The sensitivity value was 93%, specificity 100% for almond and 98% for chickpea, and efficiency 97% for almond and 93% for chickpea.     

Impact of coated calcium carbonate nanofillers and annealing treatments on the microstructure and gas barrier properties of poly(lactide) based nanocomposite films

Amorphous poly(lactide) (PLA) and nanocomposite films were prepared from melt‐blending with precipitated calcium carbonate nanofillers (PCC). Nanocomposites based on uncoated PCC (PCC‐UT), stearic acid coated PCC (PCC‐S), and poly(ε‐caprolactone) coated PCC (PCC‐P) were investigated for an inorganic content fixed to 8 wt %. Using coated nanofillers allowed preserving both PLA average molar mass and thermal stability while enhancing the nanofiller dispersion state. Poly(ε‐caprolactone) was identified as the best coating for optimized morphology and thermal properties. Maxwell law accurately described the increase in oxygen barrier properties observed for the nanocomposites based on PCC‐S. A modified Maxwell law was proposed to take account of the additional increase in barrier properties evidenced for the PLA/PCC‐P nanocomposites and assigned to the particularly strong compatibility between PCL and PLA. Different annealing conditions were investigated to respectively study the impact of physical ageing and PLA crystallization on gas permeability. Different extents of physical ageing did not significantly modify the oxygen transport properties. However, a high permeability decrease was observed for the semicrystalline nanocomposites with respect to the amorphous reference PLA film. Finally, the gain in barrier properties was shown to result from both contribution of the nanofillers and the crystalline phase. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 649–658     

Molecular Structure of Triphenylphosphine by Gas-Phase Electron Diffraction and ab initio Calculations

The molecular structure of triphenylphosphine was determined by gas-phase electron diffraction and quantum-chemical calculations. The symmetry of the molecule is C ₃ with the L_pPCC torsion angle of 32.2(3.0)°. The main geometrical parameters are as follows: bond distances, Å: P-Cl 1.839(2), C-Cav 1.400(1), and C-H 1.098(3); bond angles, deg: CPC 102.2(3), PCC 115.3(5), and CC _ipso C 119.4(4).     

The pivotal role of cyanobacteria in the evolution of cellulose synthases and cellulose synthase-like proteins

Cellulose synthase and other members of the family 2 glycosyltransferases are ubiquitous in all kingdoms of life. To date, no attempt has been made to construct a phylogeny that positions cellulose synthases in relation to other members of this family or to elucidate relationships within the cellulose synthase group. In this study, a sequence from the unicellular, marine cyanobacterium Synechococcus sp. PCC 7002 is shown to share a unique common ancestor of a clade consisting of cellulose synthases from Dictyostelium discoideum and Nostoc, as well as a plant grouping that includes CesA proteins and cellulose synthase-like (Csl) proteins G, E, B, D, and F. A branching order is established for Csl proteins that places CslG as ancestral to other members of the Csl/CesA clade. Sequences from Ciona intestinalis and Aspergillis fumigatus are shown to branch at the base of the Eukaryota/Cyanobacteria clade. These data suggest multiple independent transfers of cellulose synthases. The implications of these findings in relation to the evolutionary history of cellulose synthase are discussed.     

Synthesis of precipitated calcium carbonate nanoparticles using a two-membrane system

Precipitated calcium carbonate (PCC) nanoparticles were synthesized using a two-membrane system composed of a combination of a dialysis membrane tubing (DMT) and an emulsion liquid membrane (ELM). During the process, Ca²⁺ was diffused through the DMT, then the ELM, and finally reacted with CO ₃ ^2– ions in the internal water-in-oil (w/o) emulsion droplets. Each individual droplet was used as a microreactor. Results showed that the particle size and morphology of PCC were depended not only on the diffusion rate of Ca²⁺ across the liquid membrane, but also the carrier concentration as well. The PCC particles were mainly in vaterite form and their size increased steadily with the reaction time, as proved by X-ray diffraction and transmission electron microscopy studies.From Kolloidnyi Zhurnal, Vol. 66, No. 6, 2004, pp. 829–834.Original English Text Copyright © 2004 by Zeshan Hu, Yulin Deng, Qunhui Sun.This article was submitted by the authors in English.