Ultrasound assisted eco-friendly synthesis of 3-cinnamoyl coumarins using N,N'-(1,2-phenylene)bis(2-aminobenzamide) dichloro cobalt immobilized on mesoporous Al-SBA-15 as a new and recyclable catalyst

ABSTRACT

A novel mesoporous Al-SBA-15 modified by N,N'-(1,2-phenylene)bis(2-aminobenzamide) dichloro cobalt has been prepared and applied as a reusable catalyst in the 3-cinnamoyl coumarins synthesis via three-component reaction between benzaldehydes, salicylaldehydes and ethyl acetoacetate by the assist of ultrasonic irradiation. By using of the nanocatalyst and also ultrasound irradiation, the easiness and velocity of the abovementioned reaction were enhanced and an environment friendly condition was provided to synthesis of various 3-cinnamoyl coumarin compounds. The properties and structure of nanocatalyst have been specified by methods including powder X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), nitrogen adsorption–desorption analysis and scanning electronic microscopy (SEM). Superiority of this novel and viable method is due to mild reaction condition, short reaction times, high yields of 3-cinnamoyl coumarins, environmentally benign, recoverability of the CoCl₂N,N'-(1,2-phenylene)bis(2-aminobenzamide)/Al-SBA-15 catalyst and reusability with important preservation in its catalytic activity.     

Silica-bonded S-sulfonic acid a recyclable catalyst for the synthesis of coumarins

Silica-bonded S-sulfonic acid(SBSSA) was prepared by the reaction of 3-mercaptopropylsilica(MPS) and chlorosulfonic acid in chloroform.This solid acid has been employed as a recyclable catalyst for the synthesis of coumarins from phenols andβ-ketoesters at 80℃under solvent-free conditions.     

Application of potassium-modified carbon nitride as a highly efficient recyclable catalyst for synthesis of 4H-chromene derivatives

A potassium-doped carbon nitride (K-CN) was prepared by a simple thermal polymerization method. The prepared K-CN was characterized by Fourier infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) techniques. The obtained K-CN exhibited excellent catalytic activity for synthesis of 4H-chromene derivatives via one-pot three-component reaction of salicylaldehyde, cyclohexane-1,3-diones and 4-hydroxycoumarin in water/ethyl lactate at room temperature. The reported method shows significant advantages, such as high yield, mild and clean reaction conditions, the use of recyclable catalyst and ethyl lactate/water as an environmentally friendly solvent, multi-component reaction at room temperature, no chromatographic separation and suitable for large-scale synthesis.

     

石墨相氮化碳负载钒作为多相催化剂用于苯直接氧化制苯酚

苯酚是一种重要的化工原料,目前苯酚的工业生产路线普遍存在工艺流程复杂、苯酚收率低和环境污染严重等问题.为实现苯酚的绿色生产,苯直接氧化制苯酚的合成路线受到各国研究者的广泛关注.在苯直接羟基化反应常用的 N2O, O2和 H2O2三类氧化剂中, N2O由于来源有限,其工业应用受到极大限制;而 O2不易活化,且反应过程中常需还原剂存在,苯酚收率低;相比之下, H2O2作为氧化剂,其唯一副产物是 H2O,而且反应条件温和,因而以 H2O2为氧化剂的苯羟基化反应是最具工业应用前景的苯酚合成路线.然而,由于苯分子中的 C?H键非常稳定,活化能较高,同时产物苯酚的反应活性要高于反应物苯,因此,为实现苯的高效转化,积极探索研究高活性和稳定性的催化剂变得尤为重要.在我们之前的研究中发现,包含大π体系的氧化石墨烯载体有利于具有同样π共轭体系的反应物苯的吸附,进而促进苯的转化,提高反应活性.而石墨相氮化碳(g-C3N4)具有与氧化石墨烯类似的π共轭体系,且表面具有大量的活性位点和缺陷位,对苯环类物质具有较好的活化作用,这使其可能成为更优异的载体材料.基于此,以 g-C3N4为载体,采用浸渍法制备了一系列不同钒含量的催化剂xV/g-C3N4,并通过 XRD, FT-IR, TEM, TG等表征技术对催化剂进行了系统研究,以期揭示催化剂结构与反应活性之间的构效关系. XRD的表征结果表明,xV/g-C3N4仍具有载体 g-C3N4的层状堆积结构,且该结构不受钒负载量变化的影响.同时, xV/g-C3N4中钒物种的分散度较高,未发生团聚晶化.更直观地,通过 TEM观察发现,xV/g-C3N4中的钒物种均匀分散. FT-IR的表征结果说明钒物种与 g-C3N4之间存在较强的相互作用.此外,通过 TG表征发现, g-C3N4高温稳定性较好,即使焙烧温度高达550°C,其结构仍不受影响.综上所述,在xV/g-C3N4催化剂中,载体 g-C3N4的结构非常稳定,经负载钒物种以及焙烧处理后仍能保持不变;而钒物种与 g-C3N4之间存在较强的相互作用,且均匀分散,使催化剂具有较高的稳定性和较好的催化性能.在以 H2O2为氧化剂,80 wt%醋酸溶液为溶剂的苯直接氧化制苯酚反应中,xV/g-C3N4催化剂显示了良好的催化活性,其中反应活性最高的是8V/g-C3N4催化剂,在最佳反应条件下,苯酚的收率和选择性分别达到24.4%和99.2%.同时,通过计算 TOF值发现,8V/g-C3N4的 TOF值高达13.1 h-1,远高于文献中报道的以 C3N4为载体的催化剂的 TOF值(0.52–0.59 h-1),这表明xV/g-C3N4催化剂具有优异的催化活性.此外,以8V/g-C3N4为代表又进一步考察了催化剂的稳定性,在回收重复实验中催化剂的活性保持稳定.     

石墨化氮化碳负载Cu纳米颗粒用作高效氧还原电催化剂

高活性低成本氧还原反应(ORR)电催化剂是燃料电池和金属/空气电池等可再生能源技术的关键组成部分.在离子液体[(C16mim)2CuCl4]和质子化的石墨化氮化碳(g-CN)的存在下,采用简易的水热反应制备了Cu/g-CN电催化剂用于ORR.与纯的g-CN相比,所制Cu/g-CN表现出高的ORR催化活性:起始电势正移99 mV,为2倍动力学电流密度.另外,Cu/g-CN还表现出比商用Pt/C(HiSPECTM 3000,20%)催化剂更好的稳定性和甲醇容忍性.因此,该催化剂作为廉价的高效ORR电催化剂有望应用于燃料电池中.     

Gallic acid grafted to amine‐functionalized magnetic nanoparticles as a proficient catalyst for environmentally friendly synthesis of α‐aminonitriles

An effective approach of one‐pot catalytic Strecker reaction between aromatic aldehydes, aniline or toluidine and trimethylsilyl cyanide in the presence of amine‐functionalized Fe₃O₄@SiO₂ nanoparticles grafted with gallic acid (GA) as a powerful catalyst was developed. The fabricated reusable catalyst demonstrated high efficiency in the synthesis of α‐aminonitriles along with facile work‐up procedure. Fe₃O₄@SiO₂‐NH₂‐GA was characterized by Fourier transform‐infrared spectroscopy, scanning electron microscopy image, vibrating‐sample magnetometer curve, energy‐dispersive X‐ray analysis and thermogravimetric analysis.     

Brønsted acidic ionic liquids as dual catalyst and solvent for environmentally friendly synthesis of chalcone

Brønsted acidic ionic liquids (ILs) as dual catalyst and solvent offer a potential substitute for conventional homogenous/heterogeneous catalysts and solvent for Claisen–Schmidt (CS) condensation between acetophenone and benzaldehyde to produce chalcones. The ILs showed good catalytic activities and recycle capabilities. Both the structure of cation and anion of ILs could affect the activity of ILs. The optimized reaction conditions were investigated.     

N-Doped porous carbon supported palladium nanoparticles as a highly efficient and recyclable catalyst for the Suzuki coupling reaction

A new catalyst, Pd particles supported on the N-doped porous carbon(PC) derived from Zn-based metal–organic frameworks(zeolitic imidazolate framework: ZIF-8), was successfully prepared for the first time.The as-prepared catalyst was designated as N-doped PC-Pd, and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscope, N_2 adsorption and inductively coupled plasma atomic emission spectroscopy. The N-doped PC-Pd composite exhibited high catalytic activity toward the Suzuki–Miyaura cross-coupling reactions. The yields of the products were in the range of 90%–99%. The catalyst could be readily recycled and reused at least 6 consecutive cycles without a significant loss of its catalytic activity.     

Nano-sulfated zirconia as an efficient, recyclable and environmentally benign catalyst for one-pot three component synthesis of amidoalkyl naphthols

One pot synthesis of amidoalkyl naphthols by reaction of aromatic aldehydes,2-naphthol and amide/urea using nano-sulfated zirconia as a catalyst is reported.The reaction was carried out under solvent-free conditions.The method gave good yields of amidoalkyl naphthols in short reaction time.The catalyst is recycled for five consecutive times without loss of activity.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

Synthesis and characterization of polyvinylpyrrolidone immobilized on magnetic nanoparticles modified by ionic liquid as a novel and recyclable catalyst for the three‐component synthesis of amidoalkyl naphthols

In this study, an efficient and green procedure is explained for the preparation of 1‐amidoalkyl‐2‐naphthols applying one‐pot condensation reaction of 2‐naphthol, amide and aromatic nanoparticles (Fe₃O₄@SiO₂@IL‐PVP) as a novel solid acid catalyst under solvent‐free conditions. The remarkable features of this method are short reaction time, high conversions, and high yield of product, easy workup procedures and solvent‐free conditions. The Fe₃O₄@SiO₂@IL‐PVP catalyst was characterized via Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction patterns (XRD), scanning electron microscopy (SEM), Transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), vibrating sample magnetometer (VSM), and energy‐dispersive X‐ray spectroscopy (EDS). Also, nanocatalysts could be easily recovered by a simple magnet and reused for the next reactions without significant loss of its catalytic activity.     

Ferric hydrogensulphate as a recyclable catalyst for the synthesis of fluorescein derivatives

Polycondensation reactions of phenols with phthalic anhydride were carried out in the presence of ferric hydrogensulphate under melt conditions. The reactions proceeded in short reaction times by using a catalytic amount of Fe(HSO₄)₃ and the corresponding fluorescein derivatives were obtained in high yields. The simplicity, scale-up, along with the use of an inexpensive, non-toxic, recyclable catalyst of an environmentally benign nature, are other remarkable features of the procedure. The absorption and emission properties of these fluorescein derivatives were studied.     

Ag nanoparticles loaded on porous graphitic carbon nitride with enhanced photocatalytic activity for degradation of phenol

Highly efficient photocatalyst of visible-light-driven Ag nanoparticles loaded on porous graphitic carbon nitride (g-C₃N₄) was prepared by the reduction of Ag ions on porous g-C₃N₄. The obtained Ag/porous g-C₃N₄ composite products were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), UV-vis diffuse reflection spectra (DRS), thermal gravimetric analysis (TGA). The results demonstrated that a homogeneous distribution of Ag NPs of 10 nm was attached onto the surface of the porous g-C₃N₄. The prepared Ag/porous g-C₃N₄ samples were applied for catalyzing the degradation of phenol in water under visible light irradiation. Porous g-C₃N₄ demonstrated an excellent support for the formation and dispersion of small uniform Ag NPs. When the weight percentage of Ag reaches 5%, the nanohybrid exhibits superior photocatalytic activities compared to bulk g-C₃N₄, porous g-C₃N₄, and 2% Ag/porous g-C₃N₄ hybrids. The enhanced photocatalytic performance is due to the synergic effect between Ag and porous g-C₃N₄, which suppressed the recombination of photogenerated electron-hole pairs.     

Heteropolyacid@creatin-halloysite clay: an environmentally friendly,reusable and heterogeneous catalyst for the synthesis of benzopyranopyrimidines

Research on Chemical Intermediates - A novel hybrid catalyst has been designed and synthesized based on the incorporation of heteropolyacid into creatin-functionalized halloysite clay. The catalyst...     

A mild and expeditious synthesis of amides from aldehydes using bio glycerol-based carbon as a recyclable catalyst

The new bioglycerol-based carbon catalyst acts as an efficient, readily available, and reusable catalyst for the synthesis of amides, when aldehyde and hydroxylamine hydrochloride react in acetonitrile.     

Triazine-based graphitic carbon nitride: controllable synthesis and enhanced cataluminescent sensing for formic acid

Analytical and Bioanalytical Chemistry - A novel preparation method of triazine-based graphitic carbon nitride (g-C3N4) and its application in the cataluminescence (CTL) sensing system is proposed...     

A solvent-free synthesis of coumarins using a Wells-Dawson heteropolyacid as catalyst

Substituted coumarins are synthesized from phenols and β-ketoesters by the Pechmann reaction, using a Wells-Dawson heteropolyacid (H₆P₂W₁₈O₆₂·24H₂O) as catalyst by a solvent-free procedure. This one requires low reaction times, 130 °C temperature and as little as 1 mol % of Wells-Dawson acid, obtaining good to excellent yields of coumarins. The catalyst showed to be reusable with no differences in the yields. The results are compared with those of the reactions performed in toluene solution. The presented synthetic procedure is a convenient, clean and fast alternative for synthesizing 4-substituted coumarins (17 examples).     

Cellulose-SO3H as a recyclable catalyst for the synthesis of tetrahydropyranols via Prins cyclization

Tetrahydropyranols are prepared in good yields and with high cis-selectivity by means of the Prins cyclization using cellulose-sulfonic acid under mild reaction conditions. This is the first report on the preparation of tetrahydropyranols using epoxides and homoallylic alcohols via Prins cyclization.     

Catalytic dehydrogenation of natural terpenes via CuPd alloy nanoparticles generated on mesoporous graphitic carbon nitride

A facile wet-chemical protocol for the synthesis of bimetallic CuPd alloy nanoparticles (NPs) anchored on mesoporous graphitic carbon nitride (m-gCN), serving as both stabilizer and support material, was presented herein. The presented protocol allowed to synthesize nearly monodisperse CuPd alloy NPs with an average particle size of 3.9 ± 0.9 nm without use of any additional surfactants and to prepare CuPd/m-gCN nanocatalysts with different Cu/Pd compositions (Cu₂₅Pd₇₅/m-gCN, Cu₃₅Pd₆₅/m-gCN, Cu₁₆Pd₇₄/m-gCN, Cu₃₂Pd₆₈/m-gCN, Cu₁₀Pd₉₀/m-gCN, and Cu₅₀Pd₅₀/m-gCN). After the detailed characterization of CuPd/m-gCN nanocatalysts, they were utilized as catalysts in the dehydrogenation of terpenes. Among all tested nanocatalysts, Cu₅₀Pd₅₀/m-gCN showed the highest activity in terms of the product yields within the same reaction time. Various parameters influencing the catalytic activity of Cu₅₀Pd₅₀/m-gCN were studied using himachalene as a model substrate and the optimum conditions were determined. Under the optimized reaction conditions, the catalytic application of Cu₅₀Pd₅₀/m-gCN nanocatalysts was extended to nine different terpenes and the corresponding products were obtained in high conversion yields (>90%) under mild conditions. A reusability test showed that Cu₅₀Pd₅₀/m-gCN nanocatalysts can be re-used up to four cycles without significant loss in their initial activity.