Tetrabutylammonium phthalimide-N-oxyl: An efficient organocatalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane

Tetrabutylammonium phthalimide-N-oxyl (TBAPINO) was found to be an effective organocatalyst for rapid, simple and chemoselective protection of the hydroxyl group of alcohols and phenols using hexamethyldisilazane (HMDS) under mild conditions. The low catalyst loading, high to quantitative yields and simple removal of the catalyst from the reaction mixture illustrate the other attractive features of this protocol.     

Graphene oxide‐bound electron‐deficient tin(IV) porphyrin: a highly efficient and selective catalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane

The catalytic activity of graphene oxide‐bound tetrakis(p ‐aminophenyl)porphyrinatotin(IV) trifluoromethanesulfonate, [Sn^IV(TNH₂PP)(OTf)₂], in the trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) is reported. The prepared catalyst was characterized using inductively coupled plasma analysis, scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared and diffuse reflectance UV–visible spectroscopies. This heterogeneous catalyst was used for selective trimethylsilylation of various alcohols and phenols with HMDS in short reaction times and high yields. Also, the catalyst is of high reusability and stability, in that it was recovered several times without loss of its initial activity. The chemoselectivity of this catalytic system in the silylation of primary alcohols in the presence of secondary and tertiary alcohols and also phenols was investigated.     

Electron‐deficient vanadium(IV) tetraphenylporphyrin: A new,highly efficient and reusable catalyst for chemoselective trimethylsilylation of alcohols and phenols with hexamethyldisilazane

In the present work, the application of electron‐deficient tetraphenylporphyrinatovanadium(IV) trifluoromethanesulfonate, [V^IV(TPP)(OTf)₂], in the trimethylsilylation of alcohols and phenols with hexamethydisilazane (HMDS) is reported. This new V(IV) catalyst was used as an efficient catalyst for silylation of not only primary alcohols but also sterically hindered secondary and tertiary alcohols with HMDS. Trimethylsilylation of phenols with HMDS was also performed to afford the desired Trimethylsilyl ethers (TMS) ethers. The chemoselectivity of this method was also investigated. This catalyst can be reused several times without loss of its activity. Copyright © 2011 John Wiley & Sons, Ltd.     

RuIII(OTf)SalophenCH2–NHSiO2–Fe: an efficient and magnetically recoverable catalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane

Efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by ruthenium(III) complex of chloromethylated Salophen supported on nanomagnetic materials is reported. First, the iron nanomagnets were silica coated, functionalized with amine and then ruthenium CM‐Salophen was successfully bonded to their surface. The catalyst, Ru^III(OTf)SalophenCH₂–NHSiO₂–Fe, was characterized by elemental analysis, FT‐IR and UV–visible spectroscopic techniques, transmission electron microscopy and inductively coupled plasma (ICP). The Ru^III(OTf)SalophenCH₂–NHSiO₂–Fe catalyzed trimethylsilylation of primary and secondary alcohols as well as phenols, and the corresponding TMS ethers were obtained in high yields and short reaction times at room temperature. This new heterogenized trimethylsilylation catalyst is easily recovered with a magnet and showed no appreciable loss of activity even after five consecutive runs. Copyright © 2014 John Wiley & Sons, Ltd.     

Anchored Pd complex in MCM-41 and MCM-48: novel heterogeneous catalysts for hydrocarboxylation of aryl olefins and alcohols

We report here, for the first time, synthesis of anchored Pd complexes in mesoporous supports such as MCM-41 and MCM-48 as true heterogeneous catalysts for hydrocarboxylation of aryl olefins and alcohols to give excellent conversion ( approximately 100%) and regioselectivity ( approximately 99%) for 2-arylpropionic acids. The catalysts were characterized by powder-XRD, 31P CP-MAS NMR, FT-IR, TEM, XPS and ICP-AES. Recycle studies with these anchored Pd mesoporous catalysts were performed to confirm true heterogeneity.     

Rapid,highly efficient and chemoselective trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by reusable electron‐deficient tin(IV)porphyrin

In this paper, rapid and highly efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) in the presence of catalytic amounts of high‐valent [Sn^IV(TPP)(OTf)₂] is reported. This catalytic system catalyzes trimethylsilylation of primary, secondary and tertiary alcohols as well as phenols, and the corresponding TMS‐ethers were obtained in high yields and short reaction times at room temperature. It is noteworthy that this method can be used for chemoselective silylation of primary alcohols in the presence of secondary and tertiary alcohols and phenols. The catalyst was reused several times without loss of its catalytic activity. Copyright © 2009 John Wiley & Sons, Ltd.     

表面活性剂修饰对MCM-41负载离子液体吸附CO2影响的研究

以表面活性剂修饰的MCM-41为载体,采用浸渍法制备了负载离子液体[NH2p-mim][PF6]的二氧化碳吸附剂,考察了表面活性剂对离子液体在MCM-41上分散的影响以及所导致的CO2吸附性能的变化.利用红外光谱(FT-IR),X-射线衍射(XRD),高分辨透射电子显微镜(HRTEM),热重分析(TG)技术对所合成的负载型离子液体吸附剂进行了表征研究,并与其吸附CO2的性能变化、离子液体与表面活性剂相互作用方式等因素进行了关联.结果表明:MCM-41负载离子液体后对CO2的吸附性能略有提高,而经表面活性剂修饰的MCM-41负载离子液体后,对CO2的吸附容量较载体本身提高了2.5倍.这一方面是因为表面活性剂胶束改善了MCM-41上离子液体的分散性,另一方面是表面活性剂胶束对离子液体分子上电荷分布的影响,导致离子液体内部阴阳离子之间的相互作用减弱,从而引起离子液体中-NH2上N原子电子云密度增大,使其与CO2作用更容易.CO2在经表面活性剂修饰后的MCM-41负载离子液体[NH2p-mim][PF6]吸附剂上的吸附受扩散控制,其吸附-脱附CO2所需能量较小,经过5次吸附-脱附循环后,其吸附性能仍保持稳定.热重分析结果表明,经表面活性剂修饰后的MCM-41负载离子液体吸附剂在100℃下氮气气氛再生时不会发生性质改变.     

Nanocrystalline TiO_2 as an efficient and reusable catalyst for the chemoselective trimethylsilylation of primary and secondary alcohols and phenols

Nanocrystalline TiO₂ was used as an efficient and recyclable catalyst for the chemoselective trimethylsilylation of primary and less hindered secondary alcohols and phenols with hexamethyldisilazane（HMDS）.All reactions were performed under mild and completely heterogeneous conditions in good to excellent yields.     

Copper methanesulfonate-acetic acid as a novel catalytic system for tetrahydropyranylation of alcohols and phenols

A synergistic catalytic effect between copper methanesulfonate and acetic acid in tetrahydropyranylation of alcohols and phenol at room temperature under solvent free condition has been described. Both alcohols (primary, secondary and tertiary) and phenols reacted with 3,4-dihydro-2H-pyran smoothly to afford the corresponding tetrahydropyranyl ethers in good yields.     

[Sn(TPP)(BF4)2]: An efficient and reusable catalyst for chemoselective trimethylsilylation of alcohols and phenols with hexamethyldisilazane

Tin(IV)tetraphenylporphyrinato tetrafluoroborate, [Sn^IV(TPP)(BF₄)₂], was used as an efficient catalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS). High-valent [Sn^IV(TPP)(BF₄)₂] catalyzes trimethylsilylation of primary, secondary and tertiary alcohols as well as phenols, and the corresponding TMS-ethers were obtained in high yields and short reaction times at room temperature. While, under the same reaction conditions [Sn^IV(TPP)Cl₂] is less efficient to catalyze these reactions. One important feature of this catalyst is its ability in the chemoselective silylation of primary alcohols in the presence of secondary and tertiary alcohols and phenols. The catalyst was reused several times without loss of its catalytic activity.     

Highly efficient and chemoselective trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by reusable electron-deficient [Ti(salophen)(OTf)2]

In the present work, highly efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by high-valent [Ti^IV(salophen)(OTf)₂] is reported. Under these conditions, primary, secondary and tertiary alcohols as well as phenols were silylated in short reaction times and high yields. It is noteworthy that this method can be used for chemoselective silylation of primary alcohols in the presence of secondary and tertiary alcohols and phenols. The catalyst was reused several times without loss of its catalytic activity.     

Rapid and highly efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by reusable zirconyl triflate, [ZrO(OTf)2]

In this paper, rapid and efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane in the presence of catalytic amounts of ZrO(OTf)₂ is reported. Primary, secondary and tertiary alcohols as well as phenols were efficiently converted to their corresponding TMS ethers in short reaction times at room temperature. It is noteworthy that this method can be used for chemoselective silylation of primary alcohols in the presence of secondary and tertiary alcohols and phenols.     

Quasi solid-state electrolytes based on ionic liquid (IL) and ordered mesoporous matrix MCM-41 for supercapacitor application

Journal of Solid State Electrochemistry - Quasi solid-state electrolytes (QS-SEs) based on an ionic liquid ([EMIM][FSI]) immobilized in ordered mesoporous silica MCM-41 using physical imbibition...     

Physisorption of alcohols and water vapour by MCM-41, a model mesoporous adsorbent

Adsorption isotherms of methanol, ethanol, propan-1-ol, butan-1-ol and water vapour have been determined on MCM-41, a model mesoporous adsorbent. The isotherms of the alcohols are all of Type IV, whereas the water isotherm is of Type V in the IUPAC classification. Each adsorption isotherm exhibits a sharp step, indicative of capillary condensation within a narrow distribution of mesopores. The isotherms are reversible in the monolayer-multilayer region, but distinctive hysteresis loops are associated with the condensation-evaporation cycle. The area within the loop is dependent on the adsorptive, increasing in scale from methanol to butan-1-ol and water. It is evident that the large internal surface of MCM-41 is somewhat hydrophobic and that its mesopore structure is remarkably uniform and stable.Nomenclature d _p Pore Diameter/nm - P/P ₀ Pressure/Saturation vapour pressure at the temperature of the isotherm run - T Temperature of isotherm run/K - n _m BET monolayer capacity/mmol g^–1 - n(0.1) Amount adsorbed at relative pressureP/P ₀=0.1/µ mol g^–1 - a _m Cross sectional area of an adsorbed molecule/nm² - V _p Effective pore volume/cm³ g^–1     

A ionic liquid for dispersive liquid-liquid microextraction of phenols

In the present study, a new solvent-free mode of liquid phase microextraction termed ionic liquid dispersive liquid-liquid microextraction (IL-DLLME) was developed. Four phenols were used as model compounds in the development and evaluation of the procedure. In this method, 50 μL of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF₆]) and 1.5 mL of sample aqueous solution were placed in a 2.2-mL glass test tube and mixed by aspirating and rapidly injecting by a syringe. This procedure produced a cloudy solution. In this process, phenols in the water sample were extracted into the IL phase. After centrifuging, the fine droplets of IL sedimented to the bottom of the glass test tube. The settled phase was injected into the high performance liquid chromatograph (HPLC) for separation and detection of phenols. Some parameters that might affect the extraction efficiency were optimized. The main advantages of the proposed method are high speed, high recovery, good repeatability and environmental friendliness.     

Olefin epoxidation with tert-BuOOH catalyzed by vanadium polyoxometalate immobilized on ionic liquid-modified MCM-41

Preparation and characterization of vanadium-containing polyphosphomolybdates supported on ionic liquid-modified MCM-41, MCM-41-Im, are reported. The catalyst, [PVMo@MCM-41-Im], was characterized by elemental analysis, X-ray diffraction, scanning electron microscopy and also FT-IR, and UV-Vis spectroscopic methods. This heterogeneous catalytic system was applied for efficient epoxidation of various olefins in the presence of tert-BuOOH in 1,2-dichloroethane under reflux. The catalyst can be reused several times without apparent loss of its catalytic performance.     

Modified MCM-41 as a drug delivery system for acetylsalicylic acid

The modification of prepared MCM-41 by different groups (amino, chloro and oxo) was studied. Prepared materials were treated by acetylsalicylic acid and hybrid materials were characterized, compared from the point of view of immobilized amount of active substance. The highest amount of acetylsalicylic acid was detected using methyl-tert- butyl ether as a solvent and MCM-41 without modification after 1 h (0.35 g per 1 g of the support) or MCM modified by amino group after 5 h (0.37 g per 1 g of the support) as a support. Using amino modified MCM, the longer treatment by acetylsalicylic acid converged to the equilibrium and after 24 h the immobilized amount was 0.3 g per 1 g. A dissolution in vitro study was carried out, comparing the stability of formed interactions. The slowest dissolution was detected using non-modified MCM-41 and oxo modified material.     

Optical spectra of a novel polyoxometalate occluded within modified MCM-41

The novel polyoxometalate ([(Eu2PW10O38)4(W3O8(H2O)2(OH)4)]22-), also referred to herein as Eu8P4W43, has been immobilized inside the channels of MCM-41 mesoporous molecular sieve material by means of the incipient wetness method. For proper host-guest interaction, amine groups were introduced into the system as a result of an aminosilylation procedure. A stable and integrated Eu8P4W43 polyoxometalate was shown to be formed inside the channels of the modified MCM-41. The products were characterized by XRD, UV-vis absorption, emission, Raman excitation, Raman, and 31P solid-state NMR measurements. Infrared and Raman spectra of the polyoxometalate/MCM-41 composite systems are interpreted as showing spectral shifts due to site induced electrostatic interactions. The photoluminescent behavior of the composite at room temperature indicates a characteristic Eu3+ emission pattern corresponding to 5D0- 7F(J) transitions. A strong photoluminescence suggests the potential utility of the polyoxometalate as a luminescent material.