Effects of concentration and temperature on the corrosion properties of the Fe–Ni–Mn alloy in HCl solutions

Research on Chemical Intermediates - The electrochemical behaviour and corrosion resistance of glassy Fe68.6Ni28.2Mn3.2 (at%) specimens were studied in different concentrations of HCl solutions....     

Electrical resistivity feature of Cu–Sn–(Bi) alloy melts

The temperature dependence of electrical resistivity of Cu–Sn alloys, along with Cu–Sn–Bi alloys, has been investigated in a wide temperature range using the DC four-probe technique. Evidently abnormal changes are observed on ρ–T curves of these alloys. The result reveals that the irreversible and reversible changes on these ρ–Tcurves indicate the existence of the metastable microinhomogeneous structure and microheterogeneous structure (including some short range orders) of the Cu–Sn and Cu–Sn–Bi alloy melts, respectively. Furthermore, the addition of Bi increases the metastable microheterogeneity in the first heating process of Cu–Sn melts.     

Precipitation sequence during ageing in β1 phase of Cu–Al–Ni shape memory alloy

The shape memory alloys based on the ternary system Cu–Al–Ni are able to produce a memory effect at high temperatures. However, if the material undergoes an accidental overheating, a transformation process leads to progressive loss of its characteristics. In this study, the effect of ageing on the metastable β₁ (austenite) phase of a Cu–13.3 %Al–4 %Ni shape memory alloy was investigated. In addition, the effects of heating rate between 450 and 580 °C on the structural transformations of austenite after cooling to room temperature were studied. Observation by transmission electron microscopy of the structure that has undergone an isothermal ageing shows that the precipitation process depends on the maximum ageing temperature. Furthermore, calorimetric analysis shows that precipitates dissolution is possible when rapid heating between 450 and 580 °C. This behaviour is observed on the cooling diagram which shows a martensitic transformation.     

Mechanism of amorphisation in Cu–Ru,a binary alloy with a positive heat of mixing

Cu–Ru has a positive heat of formation and does not form equilibrium alloys. Nevertheless, amorphous alloys have been obtained by He (Phys. Rev. B 75, 045431 (2007)) by ion mixing of multilayers. Analysis of the free energies of the competing phases (the glass and the crystalline solid solutions based on Cu and Ru) leads us to propose that formation of glasses occurs as a result of kinetic frustration between the hcp and fcc solid solutions. These two have lower free energies than the glass, but those free energies are very similar, so a strong driving force for the formation of a particular crystalline phase does not exist. In addition, formation and growth of hcp and the fcc phases appears equally difficult from a kinetic point of view. Very small embryos can form but their growth will be frustrated by the presence of embryos of the other phase.     

Screening of dissolved heavy metals (Cu,Zn, Mn,Al, Cd,Ni, Pb) in seawater by a liquid-membrane–ICP–MS approach

A bulk liquid membrane system has been developed and applied to the simultaneous separation and preconcentration of up to seven heavy metals (copper, zinc, lead, cadmium, aluminium, manganese, and nickel) in seawater. Copper was selected to optimize transport conditions and then, under these conditions, the simultaneous extraction of other heavy metals was studied. The system achieved preconcentration yields ranging between 44.11% (Cd) and 77.77% (Cu) after nine hours of operation, the effectiveness of metal transport being Cu > Zn > Pb > Mn > Ni > Al > Cd. The system was applied to the preconcentration of four real seawater samples before their quantification by inductively coupled plasma–mass spectrometry (ICP–MS). Compared with the analytical procedures commonly used for trace metal determination in oceanography, the results obtained demonstrated that the new system may be used as a very clean (sample contamination-free), simple, and one-step alternative for semiquantitative, and even quantitative, simultaneous determination of heavy metals in seawater.     

Electrochemical corrosion behaviors and corrosion protection properties of Ni–Co alloy coating prepared on sintered NdFeB permanent magnet

In this study, a protective Ni–Co alloy coating was prepared on sintered NdFeB magnet applying electrodeposition technique. A pure nickel coating was also studied for a comparison. The microstructure, surface morphologies, and chemical composition of coatings were investigated using X-ray diffraction, scanning electron microscope, and energy dispersive spectroscopy, respectively. The corrosion protection properties of coatings for NdFeB magnet in neutral 3.5 wt.% NaCl solutions were evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The microstructure and surface morphologies analysis showed that the addition of cobalt element into matrix metal Ni altered the preferential orientation of pure nickel coating from (2 0 0) crystal face for pure nickel coating to (1 1 1) crystal face for Ni–Co alloy coating, and made the surface morphologies more compact and uniform due to the grain-refining. The results of potentiodynamic polarization test showed that compared with pure nickel coating, Ni–Co alloy coating exhibited much nobler corrosion potential (E _corr) and lower corrosion current density (j _corr), indicating better anticorrosive properties. The long-term immersion test by dint of EIS indicated that the Ni–Co alloy coating still presented high impedance value of 1.9 × 10⁵ Ω cm² with the immersion time of 576 h indicating the excellent anticorrosive properties, and corrosion protection properties of nickel coating for NdFeB magnet practically disappeared with the immersion time of 144 h, which also indicated that the Ni–Co alloy coating provided better corrosion protection properties for the NdFeB magnet compared with nickel coating.     

Electrodeposition of Ni–Fe alloy from a choline chloride-containing ionic liquid

Journal of Solid State Electrochemistry - The electrochemical deposition of a nickel–iron alloy from a plating solution based on a deep eutectic solvent (a eutectic mixture of ethylene glycol...     

Phase transformations in an annealed Cu–9Al–10Mn–3Gd alloy

The phase transformations in the Cu–9Al–10Mn–3Gd alloy were studied using differential scanning calorimetry, X-ray diffraction patterns, scanning electron microscopy, energy dispersion X-ray spectroscopy and magnetic moment change with applied field and temperature. The results showed that the effects produced by the Mn atoms are dominant on those attributed to the Gd atoms in the annealed Cu–9Al–10Mn–3Gd alloy. For quaternary alloy the results also indicated that the Gd stabilizes a fraction of the paramagnetic β₃ phase at lower temperatures and suppresses its paramagnetic–ferromagnetic ordering; in addition, it increases the Curie temperature of the Cu–9Al–10Mn alloy.     

Enhanced corrosion and wear resistance of Zn–Ni/Cu–Al2O3 composite coating prepared by cold spray

Journal of Solid State Electrochemistry - In order to improve the cathodic protection and wear resistance of cold spraying Zn-based coatings, Zn–Ni/Cu–Al2O3 composite coating was...     

Behavior of cobalt-containing phases in hydrochloride decomposition of sulfide Cu–Ni materials

Effect of the solution redox potential on the behavior of cobalt-containing phase components of sulfide copper-nickel concentrates in the Cu(II)/Fe(III)–Cl––HCl–Cl₂ system was studied. It was shown that, at solution redox potentials in the range 350–650 mV, phases based on heazlewoodite, pentlandite, cobaltous pentlandite, and cobalt pentlandite are transformed to thiospinels from the linneite group (M₃S₄, where M = Ni, Fe, Co). The resulting thiospinels are dissolved, with the exception of Co₃S₄, at solution redox potentials of 450 mV and less. The Co₃S₄ thiospinel is a stable compound in concentrated chloride solutions up to 650 mV, which, in the system under study, may be a reason for the poor cobalt recovery from sulfide concentrates.     

Effect of Re addition on the crystallization,heat treatment and structure of the Cu–Ni–Si-Cr alloy

Differential scanning calorimetry (DSC) was used to investigate the thermal behavior and non-isothermal crystallization kinetics of the Fe₆₇Nb₅B₂₈ metallic glasses prepared by melt-spinning method. DSC traces exhibit that the crystallization takes place through a single exothermic reaction, and it processes a good thermal stability in thermodynamics. The activation energies for nucleation and grain growth processes were calculated to be 536 ± 22 and 559 ± 20 kJ mol^?1 by Kissinger equation, respectively, and 551 ± 24 and 574 ± 20 kJ mol^?1 by Ozawa equation, respectively. It means that the grain growth process is more difficult than the nucleation process. The variation of local Avrami exponent n(x) with crystallized fraction x demonstrates that the crystallization mechanism varies at different stages. The n(x) is larger than 2.5 at the initial stage of 0 < x < 0.3, implying a mechanism of diffusion-controlled three-dimensional growth with increasing nucleation rate. The n(x) decreases from 2.5 to 1.5 in the range of 0.3 < x < 0.65, suggesting that the crystallization belongs to three-dimensional nucleation and grain growth with decreasing nucleation rate. And n(x) lies between 1.0 and 1.5 in the range of 0.65 < x < 0.95, indicating that the crystallization corresponds to the growth of particles with an appreciable initial volume. Low-temperature annealing corresponds to the precipitation of α-Fe, Fe₂B, and Fe₂₃B₆ phases, and further annealing leads to the formation of α-Fe, Fe₂B, and FeNbB phases. The magnetic properties in relation to microstructure change of the Fe₆₇Nb₅B₂₈ metallic glasses are discussed.     

Synthesis,crystal structure,thermal decomposition,and XPS studies of homo and heterotrinuclear Cu(II)–Cu(II)–Cu(II) and Cu(II)–Ni(II)–Cu(II) complexes obtained from salpn type ligands

In this study, a mononuclear CuL complex was prepared by the use of bis-N,N′-(salicylidene)-1, 3-propanediamine (LH₂) and Cu²⁺ ion. NiCl₂ and NiBr₂ salt were treated with this complex in dioxanewater medium and two new complexes [(CuL)₂NiCl₂(H₂O)₂] and [(CuL)₂NiBr₂(H₂O)₂)] with Cu(II)–Ni(II)–Cu(II) nucleus structure were obtained. In addition to this bis-N,N′-(2-hydroxybenzyl)-1,3-diaminopropane (L^HH₂) was prepared by the reduction of LH₂ with NaBH₄ in MeOH medium. The treatment of this reduced complex with Cu²⁺ ion resulted a complex [(CuL^H)₂CuCl₂] with a structure of Cu(II)–Cu(II)–Cu(II). The complexes prepared were characterized by the use of elemental analysis, IR spectroscopy, thermogravimetric and X-ray diffraction methods. The crystal structures of [(CuL)₂NiBr₂(H₂O)₂] (СIF file CCDC 1448402) and [(CuL^H)₂CuCl₂] (СIF file CCDC 1448401) complexes were elucidated. It was found that halogen ions are coordinated to terminal Cu²⁺ ions which are in a distorted square pyramid coordination sphere. It was determined that the central Cu(II), which joins terminal square pyramidal Cu(II), was coordinated only by the phenolic oxygens of the ligand while the central Ni(II) was coordinated by two phenolic oxygens of the organic ligand and two water molecules. These complexes were investigated by XPS and it was found that the terminal and central Cu²⁺ ions were different in Cu(II)–Cu(II)–Cu(II) complex. Also, the thermal degradation of the CuLH complex unit was observed to exothermic in contrast to the expectations.

     

Thermomechanical,calorimetric and magnetic properties of a Ni–Ti shape-memory alloy wire

Journal of Thermal Analysis and Calorimetry - In this work, some physical properties of a commercial Ni–Ti (nitinol) shape-memory alloy with cylindrical geometry (wire) were investigated; the...     

Investigation of the Pt–Ni–Pb/C ternary alloy catalysts for methanol electrooxidation

This research is aimed to increase the activity of anodic catalysts and thus to lower noble metal loading in anodes for methanol electrooxidation. The Pt–Ni–Pb/C catalysts with different molar compositions were prepared. Their performance were tested by using a glassy carbon disk electrode through cyclic voltammetric curves in a solution of 0.5 mol L⁻¹ CH₃OH and 0.5 mol L⁻¹ H₂SO₄. The performances of Pt–Ni–Pb/C catalyst with optimum composition (the molar ratio of Pt/Ni/Pb is 5:4:1) and Pt/C (E-Tek) were also compared. Their particle sizes and structures were determined by means of X-ray diffraction (XRD). The XRD results show, compared with that of Pt/C, the lattice parameter of Pt–Ni–Pb (5:4:1)/C catalyst decreases, its diffraction peaks are shifted slightly to a higher 2θ values. This indicates the formation of an alloy involving the incorporation of Ni and Pb atoms into the fcc structure of Pt. The electrochemical measurement shows the activity of Pt–Ni–Pb/C catalyst with an atomic ratio of 5:4:1 for methanol electrooxidation is the best among all different compositions. The activity of Pt–Ni–Pb (5:4:1)/C catalyst is much higher than that of Pt/C (E-Tek).     

Mass transfer effect on corrosion inhibition process of copper–nickel alloy in hydrochloric acid by Benzotriazole

The corrosion inhibition of copper–nickel alloy by Benzotriazole (BTA) in 1.5 M HCl has been investigated by weight loss and polarization techniques at different temperatures. Maximum value of inhibitor efficiency was 99.8% for BTA at 35 °C and 0.1 M inhibitor concentration, while the lower value was 86.8% at 55 °C and 0.02 M inhibitor concentration. The non-linear region of the polarization curve near the corrosion potential can be discussed depending on data of over potential as a function of current densities. These data can be analyzed by suggestion of a mathematical model to take into account the effect of mass transfer on activation process.     

Electrochemical interferometry of a carbon steel in 5–20 ppm KGR-134 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and with seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, an electromagnetic method, and by the electrochemical impedance spectroscopy (EIS), an electronic method. So, the abrupt rate change in the number of the fringe evolutions during corrosion test, EIS, of the carbon steel is called electrochemical interferometry. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of KGR-134 corrosion inhibitor using the EIS method, at room temperature. The electrochemical interferograms of the carbon steel in different solutions represent a detail picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data which were obtained from the EIS tests. Consequently, holographic interferometry is found to be very useful as an electrochemical interferometer for monitoring the anodic dissolution behaviors of metals in aqueous solutions, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Chemiluminescence of Aldehydes in Pyrogallol–NaOH System Using Polyaniline/Cu(I) as Catalyst

Journal of Analytical Chemistry - In this research, chemiluminescence (CL) of several aldehydes (such as oxalaldehyde, N-isovaleryl-3-amino-propanal as the bioluminescent earthworm luciferin,...     

Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].