Colorimetric detection of lead (II) based on silver nanoparticles capped with iminodiacetic acid

We report on a colorimetric probe for the determination of Pb(II). It is based on the use of silver nanoparticles that have been functionalizd with iminodiacetic acid (IDA-Ag NPs). The absorption spectrum and solution color of IDA-Ag NPs undergo dramatic changes on exposure to Pb(II) with a new absorption peak appearing at 650 nm and a concomitant color change from yellow to green. This is assumed to result from the aggregation of IDA-Ag NPs induced by Pb(II). Under optimum conditions, there is a linear relationship between the ratio of the absorbances at 650 and 396 nm, respectively, and the concentration of Pb(II) in the 0.4 to 8.0 μM concentration range, with a detection limit of 13 nM. The method was applied to the determination of Pb(II) in tap water and urea samples, and recoveries ranged from 93.7 % to 98.6 %.

Colorimetric detection of potassium ions using aptamer-functionalized gold nanoparticles

Herein, a simple and novel colorimetric method for detection of potassium ions (K⁺) was developed. The colorimetric experiments revealed that upon the addition of K⁺, the conformation of anti-K⁺ aptamer in solution changed from random coil structure to compact rigid G-quadruplex one. This compact rigid G-quadruplex structure could not protect AuNPs against K⁺-induced aggregation, and thus the visible color change from wine-red to blue-purple could be observed by the naked eye. The linear range of the colorimetric aptasensor covered a large variation of K⁺ concentration from 5 nM to 1 μM and the detection limit of 5 nM was obtained. Moreover, this assay was able to detect K⁺ with high selectivity and had great potential applications.     

Colorimetric detection of Fe3+ ions using pyrophosphate functionalized gold nanoparticles

A sensitive, selective colorimetric Fe(3+) detection method has been developed by using pyrophosphate functionalized gold nanoparticles (P(2)O(7)(4-)-AuNPs). Gold nanoparticles were prepared by reducing HAuCl(4) with sodium borohydride, in the presence of Na(4)P(2)O(7). IR spectra suggested that pyrophosphates were capped on the surface of the gold nanoparticles. Aggregation of P(2)O(7)(4-)-AuNPs was induced immediately in the presence of Fe(3+) ions, yielding a color change from pink to violet. This Fe(3+)-induced aggregation of P(2)O(7)(4-)-AuNPs was monitored using first the naked eye and then UV-vis spectroscopy with a detection limit of 5.6 μM. The P(2)O(7)(4-)-AuNPs bound by Fe(3+) showed excellent selectivity compared to other metal ions (Ca(2+), Cd(2+), Co(2+), Fe(2+), Hg(2+), K(+), Mg(2+), Mn(2+), Na(+), Ni(2+), Pb(2+), and Zn(2+)). The best detection of Fe(3+) was achieved in a pH range from 3 to 9. In addition, the P(2)O(7)(4-)-AuNPs were also used to detect Fe(3+) in lake water samples, with low interference.     

Colorimetric determination of sulfide using chitosan-capped silver nanoparticles

Microchimica Acta - The article describes a simple method for the rapid photometric and visual detection of sulfide in water samples. Silver nanoparticles were capped with chitosan (chit-AgNPs) and...     

Colorimetric detection of copper ions in tap water during the synthesis of silver/dopamine nanoparticles

A facile, economic and eco-friendly colorimetric sensor for Cu(2+) using dopamine/silver nanoparticles was developed. The sensor shows excellent sensitivity and selectivity toward Cu(2+) in the range of 3.2-512 ppb and can be applied for Cu(2+) detection in tap water.     

Catalytic gold nanoparticles for fluorescent detection of mercury(II) and lead(II) ions

In this study, we developed a fluorescence assay for the highly sensitive and selective detection of Hg²⁺ and Pb²⁺ ions using a gold nanoparticle (Au NP)-based probe. The Hg–Au and Pb–Au alloys that formed on the Au NP surfaces allowed the Au NPs to exhibit peroxidase-mimicking catalytic activity in the H₂O₂-mediated oxidation of Amplex UltraRed (AUR). The fluorescence of the AUR oxidation product increased upon increasing the concentration of either Hg²⁺ or Pb²⁺ ions. By controlling the pH values of 5 mM tris–acetate buffers at 7.0 and 9.0, this H₂O₂–AUR–Au NP probe detected Hg²⁺ and Pb²⁺ ions, respectively, both with limits of detection (signal-to-noise ratio: 3) of 4.0 nM. The fluorescence intensity of the AUR oxidation product was proportional to the concentrations of Hg²⁺ and Pb²⁺ ions over ranges 0.05–1 μM (R² = 0.993) and 0.05–5 μM (R² = 0.996), respectively. The H₂O₂–AUR–Au NP probe was highly selective for Hg²⁺ (>100-fold) and Pb²⁺ (>300-fold) ions in the presence of other tested metal ions. We validated the practicality of this simple, selective, and sensitive H₂O₂–AUR–Au NP probe through determination of the concentrations of Hg²⁺ and Pb²⁺ ions in a lake water sample and of Pb²⁺ ions in a blood sample. To the best of our knowledge, this system is the first example of Au NPs being used as enzyme-mimics for the fluorescence detection of Hg²⁺ and Pb²⁺ ions.     

Unmodified silver nanoparticles based multisensor for Ni (II) ions in real samples

This article report microwave assisted green method for the synthesis of silver nanoparticle from Brassica oleracea var. Italica (BI) extract. The synthesized silver nanoparticle (AgNP-BI) was characterized by various analytical techniques. Here we are reporting three methods for the sensing of Ni (II) from the synthesized AgNP-BI. First one is the detection of Ni (II) ion based on changes in the absorbance resulting from the complex formation of the Ni (II) ion with AgNP-BI. The second one is the fluorescent sensing of Ni (II) ion using AgNP-BI by the changes in the fluorescence intensity. The third one is the electrochemical sensing of Ni (II) ion in which silver nanoparticle attached to the platinum electrode surface. The above-mentioned methods exhibit outstanding selectivity towards Ni (II) ion. The practical application of the AgNP-BI was also carried out for the trace determination of Ni (II) ions. The limit of detection was found to be 0.932 µM using differential pulse voltammetry (DPV).     

Colorimetric detection of thiol-containing amino acids using gold nanoparticles

This paper reports findings of an investigation of the unusual colorimetric change of gold nanoparticles in the presence of thiol-containing amino acids such as homocysteine, cysteine and glutathione. The colorimetric change for homocysteine exhibits a rate that is about two orders of magnitude higher than that for cysteine, and at least five orders of magnitude higher than that for glutathione. The reactivity is effectively reduced or suppressed by the coexistence of either cysteine or glutathione. It is believed that the reactivity involves encapsulation of the particles by the thiol-containing amino acids which is followed by crosslinking at the encapsulating shells. In comparison with cysteine and glutathione, homocysteine has a slower encapsulating rate but a faster crosslinking rate. Implications of the findings of the interfacial encapsulation and crosslinking reactivities of gold nanoparticles to potential nanoparticle-enhanced analytical detection of thiol-containing amino acids are also briefly discussed.     

Colorimetric and bare-eye detection of alkaline earth metal ions based on the aggregation of silver nanoparticles functionalized with thioglycolic acid

We describe a simple and rapid method for colorimetric and bare-eye detection of the alkaline earth metal ions Mg(II), Ca(II), Sr(II) and Ba(II) based on the use of silver nanoparticles (AgNPs) functionalized with thioglycolic acid (TGA). The TGA ligand was self-assembled onto the AgNPs to form a probe that undergoes a color change from yellow to orange or red on exposure to the alkaline earth ions. It is presumed that the color change is a result of the aggregation of the AgNPs caused by the interaction of the bivalent ions with the carboxy groups on the AgNPs. The color change can be used for bare-eye and colorimetric determination of the alkaline earth metal ions, for example to rapidly determine water hardness.

Visual detection of silver(I) ions by a chromogenic reaction catalyzed by gold nanoparticles

We report on a novel method for visual detection silver(I) ion. It is based on the finding that Ag(I) ions are rapidly reduced by hydroquinone to form a shell of silver on the surface of gold nanoparticles (AuNPs) which act as catalysts for this reaction. This leads to a color change from red to yellow which can be seen with bare eyes. This scheme is sensitive and highly specific for Ag(I) ions. The detection limits are 5 μM for visual inspection and 1 μM for photometric readout, respectively. The method was successfully applied to the determination of Ag(I) ions in spiked lake water and soil.

Visual and on-site detection of mercury(II) ions on lateral flow strips using DNA-functionalized gold nanoparticles

A test strip for detection of Hg(2+) in aqueous solution based on the DNA-functionalized gold nanoparticles (DNA-AuNPs) was developed and evaluated. When Hg(2+) ions were introduced, the biotinylated DNA(2) hybridized with thiolated DNA(1) functionalized on the AuNPs (DNA(1)-AuNPs) to form mismatch complexes through thymine-Hg(2+)-thymine (T-Hg(2+)-T) coordination. The formed mismatch complexes and excess DNA(1)-AuNPs could be captured on the test line formed by streptavidin and the control line formed by DNA(3)-BSA, respectively. Two red lines appeared due to the accumulation of AuNPs, enabling visual detection of Hg(2+) with a detection limit of about 6 nM. The assay results can be obtained within 5 min. The results show that the test strip has excellent sensitivity and selectivity for detection of Hg(2+); thus it holds a great potential for rapid, on-site and real time detection of Hg(2+).     

Colorimetric detection of kanamycin based on analyte-protected silver nanoparticles and aptamer-selective sensing mechanism

In this work, a novel colorimetric detection method for kanamycin (Kana), a widely used aminoglycoside antibiotic, has been developed using unmodified silver nanoparticles (AgNPs) as sensing probe. The method is designed based on the finding that the analyte (Kana) can protect AgNPs against salt-induced aggregation, and nucleic acid aptamers can decrease the risk of false positives through an aptamer-selective sensing mechanism. By use of the proposed method, selective quantification of Kana can be achieved over the concentration range from 0.05 to 0.6 μg mL⁻¹ within 20 min. The detection limit is estimated to be 2.6 ng mL⁻¹, which is much lower than the allowed maximum residue limit. Further studies also demonstrate the applicability of the proposed method in milk samples, revealing that the method may possess enormous potential for practical detection of Kana in the future.     

Multiplexed analysis of silver(I) and mercury(II) ions using oligonucletide-metal nanoparticle conjugates

A colorimetric assay has been developed for the simultaneous selective detection of silver(I) and mercury(II) ions utilizing metal nanoparticles (NPs) as sensing element based on their unique surface plasmon resonance properties. In this method, sulfhydryl group modified cytosine-(C)-rich ssDNA (SH-C-ssDNA) was self-assembled on gold nanoparticles (AuNPs) to produce the AuNPs-C-ssDNA complex, and sulfhydryl group modified thymine-(T)-rich ssDNA (SH-T-ssDNA) was self-assembled on silver nanoparticles (AgNPs) to produce the AgNPs-T-ssDNA complex. Oligonucleotides (SH-C-ssDNA or SH-T-ssDNA) could enhance the AuNPs or AgNPs against salt-induced aggregation. However, the presence of silver(I) ions (Ag(+)) in the complex of ssDNA-AuNPs would reduce the stability of AuNPs due to the formation of Ag(+) mediated C-Ag(+)-C base pairs accompanied with the AuNPs color change from red to purple or even to dark blue. Moreover, the presence of mercury(II) ions (Hg(2+)) would also reduce the stability of AgNPs due to the formation of Hg(2+) mediated T-Hg(2+)-T base pairs accompanied with the AgNPs color change from yellow to brown, then to dark purple. The presence of both Ag(+) and Hg(2+) will reduce the stability of both AuNPs and AgNPs and cause the visible color change. As a result, Ag(+) and Hg(2+) could be detected qualitatively and quantitatively by the naked eye or by UV-vis spectral measurement. The lowest detectable concentration of a 5 nM mixture of Ag(+) and Hg(2+) in the river water was gotten by the UV-vis spectral measurement.     

Colorimetric detection of mercury(II) in a high-salinity solution using gold nanoparticles capped with 3-mercaptopropionate acid and adenosine monophosphate

A new colorimetric sensor for sensing Hg2+ in a high-salinity solution has been developed using gold nanoparticles (AuNPs) decorated with 3-mercaptopropionate acid (MPA) and adenosine monophosphate (AMP). Because of the high negative charge density of AMP on each AuNP surface, MPA/AMP-capped AuNPs are well dispersed in a high-salt solution. In contrast, the aggregation of MPA-capped AuNPs was induced by sodium ions, which shield the negative charges of the carboxylic groups of MPA. Through the coordination between the carboxylic group of MPA and Hg2+, the selectivity of MPA/AMP-capped AuNPs for Hg2+ in a high-salt solution is remarkably high over that of the other metals without the addition of a masking agent or a change in the temperature. We have carefully investigated the effect of the AMP concentration on the stability and sensitivity of MPA/AMP-capped AuNPs. Under optimum conditions, the lowest detectable concentration of Hg2+ using this probe was 500 nM on the basis of the measurement of the ratio of absorption at 620 nm to that at 520 nm. The sensitivity to Hg2+ can be further improved by modifying the MPA/AMP-capped AuNPs with highly fluorescent rhodamine 6G (R6G). By monitoring the fluorescence enhancement, the lowest detectable concentration of Hg2+ using R6G/MPA/AMP-capped AuNPs was 50 nM.     

Fluorescence detection of mercury(II) and lead(II) ions using aptamer/reporter conjugates

We have developed a fluorescence technique for the detection of Hg²⁺ and Pb²⁺ ions using polythymine (T₃₃)/benzothiazolium-4-quinolinium dimer derivative (TOTO-3) and polyguanine (G₃₃)/terbium ions (Tb³⁺) conjugates, respectively. Hg²⁺ ions induce T₃₃ to form folded structures, leading to increased fluorescence of the T₃₃/TOTO-3 conjugates. Because Pb²⁺ ions compete with Tb³⁺ ions to form complexes with G₃₃, the extent of formation of the G₃₃-Tb³⁺ complexes decreases upon increasing the Pb²⁺ concentration, leading to decreased fluorescence at 545 nm when excited at 290 nm. To minimize interference from Hg²⁺ ions during the detection of Pb²⁺ ions, we conducted two-step fluorescence measurements; prior to addition of the G₃₃/Tb³⁺ probe, we recorded the fluorescence of a mixture of the T₃₃/TOTO-3 conjugates and Hg²⁺ ions. The fluorescence signal obtained was linear with respect to the Hg²⁺ concentration over the range 25.0-500 nM (R² = 0.99); for Pb²⁺ ions, it was linear over the range 3.0-50 nM (R² = 0.98). The limits of detection (at a signal-to-noise ratio of 3) for Hg²⁺ and Pb²⁺ ions were 10.0 and 1.0 nM, respectively. Relative to other techniques for the detection of Hg²⁺ and Pb²⁺ ions in soil and water samples, our present approach is simpler, faster, and more cost-effective.     

Colorimetric detection of iron ions (III) based on the highly sensitive plasmonic response of the N-acetyl-l-cysteine-stabilized silver nanoparticles

We report here a facile colorimetric sensor based on the N-acetyl-l-cysteine (NALC)-stabilized Ag nanoparticles (NALC–Ag NPs) for detection of Fe³⁺ ions in aqueous solution. The Ag NPs with an average diameter of 6.55 ± 1.0 nm are successfully synthesized through a simple method using sodium borohydride as reducing agent and N-acetyl-l-cysteine as protecting ligand. The synthesized silver nanoparticles show a strong surface plasmon resonance (SPR) around 400 nm and the SPR intensity decreases with the increasing of Fe³⁺ concentration in aqueous solution. Based on the linear relationship between SPR intensity and concentration of Fe³⁺ ions, the as-synthesized water-soluble silver nanoparticles can be used for the sensitive and selective detection of Fe³⁺ ions in water with a linear range from 80 nM to 80 μM and a detection limit of 80 nM. On the basis of the experimental results, a new detection mechanism of oxidation–reduction reaction between Ag NPs and Fe³⁺ ions is proposed, which is different from previously reported mechanisms. Moreover, the NALC–Ag NPs could be applied to the detection of Fe³⁺ ions in real environmental water samples.     

Simple colorimetric detection of dopamine using modified silver nanoparticles

Dopamine(DA) plays an important role in health and peripheral nervous systems. Colorimetric detection of DA has the advantage of color change and simplicity in operation and instrumentation. Herein, we report a highly sensitive and selective colorimetric detection of DA by using two specific ligands modified Ag nanoparticles, where the DA molecules can make dual recognition with high specificity. The colloidal suspension of modified Ag nanoparticles was agglomerated after interacting with DA, while the color of Ag nanoparticles suspension changed from yellow to brown, arising from the interparticle plasmon coupling during the aggregation of Ag nanoparticles. The modified Ag nanoparticles suspension and agglomeration were confirmed by transmission electron microscope images. The optical properties behind the color change were thoroughly investigated by using UV-Vis and Raman techniques. The changes in p H, zeta potential, particle size and surface charge density by adding DA were also determined by using dynamic light scattering measurements. The detection limits of modified Ag probes for DA was calculated to be 6.13′10~(-6) mol L~(-1)(S/N=2.04) and the correlation co-efficient was determined to be 0.9878. Because of the simplicity in operation and instrumentation of the colorimetric method, this work may afford a feasible, fast approach for detecting and monitoring the DA levels in physiological and pathological systems.