Biodegradable and biocompatible inorganic–organic hybrid materials. I. Synthesis and characterization

The hydroxyl or vinyl end-groups of linear or three-arm star-shaped poly(ε-caprolactone) (PCL) chains have been derivatized into triethoxysilane groups reactive in the sol-gel process. New transparent hybrid materials that combine tetraethylorthosilicate (TEOS) and PCL known for biodegradability and biocompatibility have accordingly been prepared. The sol-gel process is, however, limited by the early vitrification of the reactive system. However, thermal posttreatment can overcome these diffusional and/or kinetic limitations as assessed by a set of analytical methods. The thermal stability of PCL is improved by incorporation into the silica network. Conversely, the thermal stability of the ceramer depends on the effective PCL content. The extent of PCL incorporation into the silica network depends on PCL molecular weight, number, and reactivity of the PCL functional groups. IR spectroscopy has shown that hydrogen bonding occurs between the ester groups of PCL and residual OH groups of the silicate component. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2295–2309, 1997     

Synthesis and characterization of new hybrid inorganic–organic polymer nanocomposite as efficient catalyst for oxidative desulfurization of real fuel

Sulfur-containing compounds are responsible for much air pollution, and therefore eliminating these compounds is of importance. Herein, a hybrid organic–inorganic recyclable nanocatalyst (TBA-PW₁₁Ni@PANI) was synthesized successfully to investigate its effects on the catalytic oxidative desulfurization (CODS) process of real gasoline/model fuel. To this end, the Keggin-based mono-lacunary polyoxometalate [PW₁₁NiO₃₉] was prepared and modified with quaternary cation tetrabutylammonium (TBA). Then, this was further immobilized on polyaniline (PANI) via the sol–gel method. The synthesized nanocomposite was characterized using various techniques. The high dispersion of polyoxometalate on PANI was confirmed. Also, it was found that the crystalline structure remained unaltered after immobilization. In addition, the effects of various parameters such as dosage and temperature on the CODS of model fuel in the presence of H₂O₂–acetic acid (1:2 v/v) were studied in detail. Moreover, the kinetics of the CODS process was also studied and a mechanism proposed. According to the results, TBA-PW₁₁Ni@PANI showed an efficiency of up to 97% with 0.1 g at 35°C (optimum values) which implies its good catalytic functionality in the CODS process. Finally, the TBA-PW₁₁Ni@PANI catalyst displayed long-term stability and good reusability after five runs.     

Preparation and characterization of SO4 2−/Fe2O3–TiO2–Nd2O3 catalyst

This paper reports on the preparation of SO₄ ^2?/Fe₂O₃–TiO₂–Nd₂O₃ (SFTN) by combustion method. The effect of Nd content on catalytic activity was investigated. The prepared materials doped and undoped by Nd were compared by means of TG-DTG, XRD, FT-IR, NH₃-TPD and TEM techniques. Results indicated that the introduction of Nd improved the catalytic activities of the catalysts. Catalytic activity of SFTN was the highest with 98.3 % menthol conversion when Nd content was at 2 wt%. The introduction of Nd stabilized the coordination bond between the sulfate irons and the metallic oxides, helping in the formation of solid acid sites, enhancing the dispersion of catalyst particles, and inhibiting the growth of catalyst particles under heating.     

Synthesis and characterization of Fe3O4@SiO2–polymer-imid–Pd magnetic porous nanospheres and their application as a novel recyclable catalyst for Sonogashira–Hagihara coupling reactions

We demonstrate herein the modification of magnetic nanoparticles and their use as a magnetic nanocatalyst in direct coupling reactions of aryl halides with terminal alkynes. Magnetite particles were prepared by simple co-precipitation method in aqueous medium, and then Fe₃O₄@ SiO₂ nanosphere was synthesized by using nano-Fe₃O₄ as the core, TEOS as the silica source and PVA as the surfactant. Fe₃O₄@SiO₂ was coated with polymeric N-heterocyclic carbene/Pd. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometer and N₂ adsorption–desorption isotherm analysis. Poly (N-vinyl imidazole) functionalized Fe₃O₄@SiO₂ nanoparticle was found to be an efficient nanocatalyst in Sonogashira–Hagihara cross-coupling reactions. The nanocatalyst can be easily recovered by a magnetic field and reused for six runs without appreciable loss of its catalytic activity.     

Synthesis,characterization and application of a novel nanorod-structured organic–inorganic hybrid material as an efficient catalyst for the preparation of aminouracil derivatives

Research on Chemical Intermediates - In this work, a novel nanorod-structured organic–inorganic hybrid material namely nanorod-[SiO2-Pr-Im-SO3H][TFA] (N-[SPIS][TFA]) has been synthesized, and...     

Synthesis and characterization of sol–gel-derived molecular imprinted polymeric materials for cholesterol recognition

The sol–gel-derived host matrices are well known for biosensor applications where various types of organic and biological molecules can be immobilized and can act as recognition elements. The molecular imprinting technology is an attractive alternative method where expensive and labile biorecognition elements can be replaced by molecular imprinted polymers (MIPs), which are capable of recognizing a target molecule of an interest. In the present study, hybrid sol–gel MIPs were synthesized in the form of crushed powder (CP) by both non-hydrolytic and hydrolytic method for cholesterol recognition. These MIPs were characterized by scanning electron microscopy (SEM), fourier transform-infrared (FT-IR), liquid chromatography-mass spectrometry (LC–MS) and nitrogen adsorption–desorption isotherm measurements. The template molecule was extracted by means of soxhlet extraction and calcination method. The cholesterol adsorption experiments were performed by using non-imprinted (NI) and extracted crushed powder (ExCP) and the percentage of adsorption was determined by measuring the residual quantity in the analyte solution using Liebermann-Burchard (L-B) reagent. The adsorption studies with non-imprinted crushed powder (NICP) showed interference with L-B reagent as well as non-specific binding between analyte molecules and silica matrix. The percentage of adsorption or rebinding was found to be higher for phenyl triethoxysilane (PhTEOS)-derived ExCP (composition 3) which was synthesized by the aqueous sol–gel processing method at low pH as compared to PhTEOS-derived (composition 1) and 3-aminopropyltriethoxysilane (APTES)-derived ExCP (composition 2) prepared by non-hydrolytic method. The reusability of used ExCP after re-extraction was also investigated. The various factors affecting rebinding of template molecules were discussed along with interference study. The study provided information on molecular imprinting of cholesterol in sol–gel matrix and highlighted the importance of characterization of MIPs before applying it for sensing applications.     

Synthesis and characterization of Na2O–CaO–SiO2 glass–ceramic

The Na₂O–CaO–SiO₂ ternary glass–ceramic with the composition of 49 mass% Na₂O, 20 mass% CaO, and 31 mass% SiO₂ was prepared by the conventional method. The ternary glass–ceramic was characterized using X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy techniques. The Na₂CaSiO₄ phase, having the cubic crystal system, with the crystallite size of 25.14 nm and lattice parameter of 0.7506 nm was determined from the XRD pattern. The activation energy of the glass–ceramic calculated from the DTA curves was found to be 162.02 kJ mol^?1. The Avrami exponent was found to be ~2 indicating a one-dimensional growth process. The mass loss percent from ambient temperature to 1,173 K is less than 1 %. The density was calculated to be 2,723 kg m^?3. The fine-grained microstructure with the particle sizes less than 1 μm was confirmed by the scanning electron microscope micrograph.     

Synthesis and characterization of a novel organic–inorganic hybrid supramolecular recognition material and its selective adsorption for cesium

To separate Cs(I) from highly active liquid waste, a macroporous silica-based 25, 27-bis(iso-propyloxy)calix[4]arene-26,28-crown-6 (BiPCalix[4]C6) supramolecular recognition material, BiPCalix[4]C6/SiO₂–P, was synthesized and characterized by SEM, FT-IR, and TG-DSC. The adsorption properties of BiPCalix[4]C6/SiO₂–P and a macroporous polymer-based supramolecular recognition composite, BiPCalix[4]C6/XAD-7, were compared. It was found that BiPCalix[4]C6/SiO₂–P exhibited better adsorption ability and faster adsorption dynamics than BiPCalix[4]C6/XAD-7. The adsorption isotherm of Cs(I) onto BiPCalix[4]C6/SiO₂–P was studied at 298 K and it was well described by Langmuir isotherm model. The complex composition between BiPCalix[4]C6/SiO₂–P and Cs(I) was determined as 1:1 type by investigating the effect of the concentrations of BiPCalix[4]C6, Cs(I), and H⁺ on the adsorption. Meanwhile, the selectivity of BiPCalix[4]C6/SiO₂–P towards Na(I), K(I), Rb(I), Cs(I), Sr(II), Ba(II), Ru(III), Mo(VI), La(III), and Y(III) was investigated.     

Preparation and characterization of Fe3O4@Cu-β-CD as a hybrid magnetic catalyst for the synthesis of dihydropyrano[2,3-c]pyrazoles in H2O

Research on Chemical Intermediates - Fe3O4@Cu-β-CD is a hybrid composite with high catalytic activity. Easy separation with an external magnet and recyclability are the advantages of this...     

Synthesis and characterization of bimetallic Pt–Fe/polypyrrole–carbon catalyst as DMFC anode catalyst

A novel synthesis route, concerning in situ interfacial polymerization of pyrrole on carbon black and following co-deposition of Pt and Fe on polypyrrole–carbon support, is developed to prepare the bimetallic Pt–Fe/polypyrrole–carbon catalyst. In this synthesis process, ferrous precursor simultaneously functions as an oxidant for the polymerization of pyrrole. The Pt–Fe/polypyrrole–carbon catalyst shows improved catalytic activity towards methanol oxidation compared to commercial Pt/C catalyst, which may be of great potential in direct methanol fuel cells.     

Synthesis,characterization and biological evaluation of N-substituted triazinane-2-thiones and theoretical–experimental mechanism of condensation reaction

The synthesis of triazinthions and their reactions with some nucleophilic reagents have been investigated during this scientific study. Thus, thiourea with a single component has been synthesized as a result of concomitant reactions of aldehyde and amines trials. The structure of the synthesized compounds was confirmed by ¹H, ¹³C NMR spectroscopy methods. The inhibitory effects of novel N-substituted triazinane-2-thione derivatives on acetylcholinesterase (AChE) activity were performed according to the spectrophotometric method of Ellman et al. These novel N-substituted triazinane-2-thiones derivatives were effective inhibitors of the α-glycosidase, cytosolic carbonic anhydrase I and II isoforms (hCA I and II), and Acetylcholinesterase (AChE) enzymes with K_i values in the range of 1.01 ± 0.28 to 2.12 ± 0.37 nm for α-glycosidase, 13.44 ± 4.39 to 74.98 ± 6.25 nm for hCA I, 10.41 ± 4.8 to 72.6 ± 17.66 nm for hCA II, 36.82 ± 9.95 to 108.48 ± 1.17 nm for AChE, and 624.62 ± 100.34 to 1124.16 ± 205.14 nm for α-glycosidase, respectively.     

Synthesis,structure, and spectroscopic characterization of a 2-D organic–inorganic hybrid CuII–ErIII heterometallic arsenotungstate

An organic–inorganic hybrid Cu^II–Er^III heterometallic arsenotungstate Na₃[Cu(en)₂(H₂O)][Cu(en)₂]_1.5[H₃Er(α-AsW₁₁O₃₉)₂]·4H₂O (1) (en = ethylenediamine) has been hydrothermally synthesized and structurally characterized by elemental analyses, IR and UV spectra, X-ray photoelectron spectroscopy (XPS), cyclic voltammetry and single-crystal X-ray diffraction. 1 displays an organic–inorganic 2-D sheet structure constructed by sandwich-type [H₃Er(α-AsW₁₁O₃₉)₂]⁸⁻ fragments and [Cu(en)₂]²⁺ connectors. From the topological viewpoint, if the [H₃Er(α-AsW₁₁O₃₉)₂]⁸⁻ fragments are viewed as 3-connected nodes and [Cu(en)₂]²⁺ connectors are considered as linkers, the 2-D sheet can be simplified into a 2-D (6,3)-network topology.     

Preparation and characterization of single RE2O3–Mo secondary emission materials

La₂O₃–Mo, Y₂O₃–Mo, Gd₂O₃–Mo and Ce₂O₃–Mo were prepared by liquid–liquid doping combined with spark plasma sintering. The microstructure and surface behaviour of rare earth oxide of the cathode have been studied by microscope, Auger Electron Spectroscopy (AES) and X-ray Photoelectron Spectroscopy (XPS) methods. Among these four kinds of cathode, Y₂O₃–Mo cathode exhibits the best secondary emission property, i.e., the maximum secondary emission yield could reach 5.24. The penetration depth of primary electrons and escape depth of secondary electrons have been calculated and the energy distribution of primary electrons in the cathode has been simulated by Monte Carlo method. Y₂O₃–Mo cathode has the largest penetration depth and escape depth, which could be attributed to the highest secondary electron emission yield of the cathode.     

Fe3O4@SiO2@Propyl–ANDSA: as a new catalyst for one-pot synthesis of 4H-chromene

Research on Chemical Intermediates - This work describes a new method for a one-pot multicomponent condensation of a variety of aldehydes with dimedone and malononitrile in water, providing a...     

Synthesis, characterization and flame retardant of UV-curable hybrid coatings containing SiO2–P2O5–B2O3 via sol–gel method

A ternary sol containing silicon, phosphorus and boron modified by ??-methacryloxypropyltrimethoxysilane was synthesized by sol?Cgel method. The ternary sol was incorporated into the organic matrix and UV-curable organic/inorganic hybrid coating materials were obtained. Hardness, transmittance, haze, cross-cut adhesion and abrasion resistance results showed that the mechanical properties of the hybrid coatings improved effectively with no comprising on optical properties by increasing sol content. Scanning electron microscopy and Energy Dispersive X-ray spectrometer studies indicated that inorganic particles were homogenously dispersed in the organic matrix. The flame retardancy of the UV-curable coatings was investigated by thermogravimetric analysis and microscale combustion calorimeter. The results showed that the incorporation of sol into the organic network led to an improvement in the thermal stability and flame retardancy of the hybrid coating materials. It is a desirable achievement to improve simultaneously both flame retardancy and mechanical properties of the coatings.     

Synthesis and characterization of amantadinium iodoacetatobismuthate,a hybrid compound with mixed iodide–carboxylate anions

The amantadinium iodoacetatobismuthate(III) [C₁₀H₁₅NH₃·(CH₃)₂CO]₂[BiI_3.67(CH₃COO)_1.33] is a new hybrid halometallate with iodide ions partially replaced by oxygen-containing acetates to form stronger interaction between the anionic and cationic substructures. The title compound as well-shaped orange-red crystals was synthesized by a facile reaction in acetone solution in the presence of glacial acetic acid. The crystal structure of the compound consists of the infinite anionic chains [BiI_3.67(CH₃COO)_1.33]^2– and the countercations [C₁₀H₁₅NH₃·(CH₃)₂CO]+; according to the optical absorption data, the test compound is a semiconductor with a band gap of 2.06 eV.     

Preparation and characterization of molecularly imprinted organic–inorganic hybrid materials by sol–gel processing for selective recognition of ibuprofen

This work adopted semi-covalent imprinting to prepare molecularly imprinted polymers (MIP) with ibuprofen, a non-steroidal anti-inflammatory drug, as template by sol–gel processing, which is characterized by both the high affinity of covalent binding and the mild operation conditions of non-covalent rebinding. A functional monomer, which was used to synthesize the monomer-imprinted molecule complex, was prepared by multi-step synthesis for the first time. MIP was characterized by Fourier transform IR spectrum and nitrogen adsorption. Thin-layer chromatography separation was used to evaluate the specific molecular recognition ability of MIP. In addition, dynamic and thermodynamic studies on MIP imprinting ibuprofen were undertaken. The results of equilibrium rebinding experiments showed that MIP exhibited good adsorption capacity for ibuprofen. Scatchard analysis illustrated that the template-polymer system shows only one-site binding behavior with a dissociation constant of 1.84 mmol L^?1. Dynamic adsorption exhibited pseudo-second-order kinetics. The positive value of ΔH^θ and the negative values of ΔG^θ demonstrated that the binding system for MIP is endothermic and spontaneous.