Silica sulfate as an efficient recyclable catalyst for protection of α-hydroxy acids with cyclohexanone

Silica sulfate has been found to be an effective catalyst for protection of α-hydroxy acids under mild reaction conditions. Although the reaction can be carried out in diethyl ether, a remarkable rate enhancement was observed when the reaction was carried out under solvent-free condition. The catalyst could also be recovered and reused without any significant loss of reactivity. A wide range of α-hydroxy acids could be protected using cyclohexanone derivatives in high yield in presence of silica sulfate catalyst at room temperature.     

Urchin-like double-shelled Pd–PdO/ZnO hollow sphere as an efficient catalyst for the Suzuki-Miyaura reaction

In recent years, the modi?cation of metal oxides with noble metals to decrease the loading amount of expense of noble metal catalyst and amend the stability of nanocatalyst in chemical reactions has attracted signi?cant attention. Here in this study, the urchin-like double-shelled Pd–PdO/ZnO hollow sphere is successfully prepared by using a simple hydrothermal method and carbon sphere as a hard template. The structure of the catalyst was confirmed by using field-emission scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, energy-dispersive X-ray spectroscope, and BET. The total amount of palladium particles on ZnO was determined by induced coupled plasma analysis. The prepared catalyst gave high catalytic activity for the Suzuki reaction of aryl halides to afford biphenyls under milder conditions. Furthermore, the stability and reusability of catalyst were investigated, and all of the data proved that urchin-like double-shelled Pd–PdO/ZnO hollow sphere could be recycled five times without marked loss of activity.     

Palladium tetrazole–supported complex as an efficient catalyst for the Heck reaction

Abstract  

A tetrazole-supported polymeric ligand has been synthesized. The palladium complex derived from the polymeric material has been evaluated as a catalyst for the Heck reaction of aryl iodides and bromides with styrene to provide the corresponding products in high yields. The reaction proceeded smoothly in the presence of 1 mol% with respect to Pd of catalyst in DMF at 125 or 140 °C within 1–3 h. Recycling studies showed that the catalyst can be readily recovered and reused for several times without significant loss of catalytic activity.     

Solid supported Hayashi–Jørgensen catalyst as an efficient and recyclable organocatalyst for asymmetric Michael addition reactions

A comparison of three different catalytic systems for the efficient, asymmetric synthesis of N-({(3R,4R)-4-[(benzyloxy)methyl]pyrrolidin-3-yl}methyl)-N-(2-methylpropyl)benzenesulfonamide 1 (BZN) is described. The presented strategy is based on the organocatalytic Michael addition of aldehyde 2 to trans-nitroalkene 3, and subsequent reductive cyclization. High yields, enantio-, and diastereoselectivities were achieved in the Michael addition by application of a POSS- or Wang resin-supported Hayashi–Jørgensen catalyst.     

Xylan-type hemicelluloses supported terpyridine–palladium(II) complex as an efficient and recyclable catalyst for Suzuki–Miyaura reaction

Xylan-type hemicelluloses supported terpyridine–palladium(II) as a novel biomass-supported catalyst was synthesized and characterized in terms of morphology, composition, and thermal stability. The nano-Pd catalyst was further explored for Suzuki–Miyaura reaction between arylboronic acid and aryl halide under aerobic condition, with a yield up to 98 %. In particular, the catalyst exhibited both high catalytic activity and stability for Suzuki–Miyaura reaction. Furthermore, the catalyst could be easily recovered by simple filtration and reused at least six times without significant loss of its catalytic activity. This work provides a novel and effective supported catalyst, and broadens the applications of polysaccharides in green catalysis.     

Synthesis of thiazole derivatives using magnetic nano zirconia–sulfuric acid as an efficient and recyclable catalyst in water

Russian Journal of General Chemistry - Fe3O4 magnetic core covered by zirconia shell bearing sulfonic acid groups (Fe3O4@ZrO2–SO3H) was prepared and used as an efficient acidic catalyst in...     

Bimetallic Co–Pd alloy nanoparticles as magnetically recoverable catalysts for the aerobic oxidation of alcohols in water

Co–Pd bimetallic alloy nanoparticle catalysts were prepared from CoCl₂, Pd(OAc)₂ and several capping agents with Li(C₂H₅)₃BH. The nanoparticle catalysts were applied to the aerobic oxidation of a variety of alcohols in water to give the corresponding carbonyl products. The catalyst was magnetically recovered and reused for further oxidation. The nanoparticle catalysts were characterized with TEM, ICP, and XPS analyses.     

Immobilization of palladium nanoparticles as a recyclable heterogeneous catalyst for the Suzuki–Miyaura coupling reaction

This work describes the synthesis of Pd nanoparticles that are stabilized on CaAl-layered double hydroxide functionalized with Tris (tris(hydroxymethyl)aminomethane). The synthesized catalyst is characterized by several different analyses and has been successfully applied to the Suzuki–Miyaura reaction.     

ZrOCl2·8H2O as an efficient and recyclable catalyst for the clean synthesis of xanthenedione derivatives under solvent-free conditions

ZrOCl₂·8H₂O was found to be an efficient and recyclable catalyst for the reaction of aromatic aldehydes with dimedone to afford 1,8-dioxo-1,2,3,4,5,6,7,8-octahydroxanthenes under solvent-free conditions. Short reaction time, excellent yields and simple work-up are the advantages of this procedure. The interaction obtained from XRD studies was shown that the catalyst loses H₂O during the reaction but it did not affect catalytic activity of the catalyst and the catalyst could be reused several times.     

Sonochemical synthesis of graphene oxide supported Pt–Pd alloy nanocrystals as efficient electrocatalysts for methanol oxidation

Pt–Pd bimetallic nanoparticles supported on graphene oxide (GO) nanosheets were prepared by a sonochemical reduction method in the presence of polyethylene glycol as a stabilizing agent. The synthetic method allowed for a fine tuning of the particle composition without significant changes in their size and degree of aggregation. Detailed characterization of GO-supported Pt–Pd catalysts was carried out by transmission electron microscopy (TEM), AFM, XPS, and electrochemical techniques. Uniform deposition of Pt–Pd nanoparticles with an average diameter of 3 nm was achieved on graphene nanosheets using a novel dual-frequency sonication approach. GO-supported bimetallic catalyst showed significant electrocatalytic activity for methanol oxidation. The influence of different molar compositions of Pt and Pd (1:1, 2:1, and 3:1) on the methanol oxidation efficiency was also evaluated. Among the different Pt/Pd ratios, the 1:1 ratio material showed the lowest onset potential and generated the highest peak current density. The effect of catalyst loading on carbon paper (working electrode) was also studied. Increasing the catalyst loading beyond a certain amount lowered the catalytic activity due to the aggregation of metal particle-loaded GO nanosheets.     

Superparamagnetic iron oxide as an efficient catalyst for the one-pot, solvent-free synthesis of α-aminonitriles

Superparamagnetic Fe₃O₄ is shown to act as a very efficient catalyst for the one-pot, three-component synthesis of α-aminonitriles from aldehydes, amines, and TMSCN. The catalyst is easily recovered by the use of an external magnet and reused in several reactions without any noticeable loss of activity. The products are obtained rapidly at room temperature in good purity upon separation of the catalyst and evaporation of the volatiles of the reaction mixture.     

Tris(hydroxymethyl)aminomethane as an efficient organobase catalyst for the synthesis of β-phosphonomalonates

Tris(hydroxymethyl)aminomethane (THAM) is a highly efficient and recyclable organobase catalyst for the nucleophilic phosphonylation of benzylidene malononitrile under solvent-free conditions. This new catalytic methodology is applicable without a solvent, eco-friendly, economically viable, avoids conventional isolation procedures, and has a facile work-up procedure and wide scope. THAM is an inexpensive, commercially available, non-toxic, and biodegradable novel organocatalyst. Furthermore, it can be reused in up to five cycles without loss in catalytic activity, and no chromatographic separation is needed to obtain the desired products.     

Cu(II)–metformin immobilized on graphene oxide: an efficient and recyclable catalyst for the Beckmann rearrangement

Research on Chemical Intermediates - In this study, for the first time, the copper(II) nanoparticles (NPs) have been immobilized on metformin-functionalized graphene oxide and then its catalytic...     

Palladiumimmobilized on chitosan nanofibers cross-linked by glutaraldehyde as an efficient catalyst for the Mizoroki–Heck reaction

Nonwoven chitosan (CS) nanofiber mats were successfully prepared by the electrospinning of the mixture of CS and poly(ethylene oxide) (PEO) in acetic acid aqueous solution. The CS/PEO fiber mats were treated with glutaraldehyde aqueous solution to stabilize fibers in solution. The concentration of glutaraldehyde is important for incorporating swelling properties in the cross-linked CS/PEO fiber mats. The cross-linked CS/PEO fibers (CCS/PEO fibers) were then used as supports for palladium catalysts in the Mizoroki–Heck reaction. The results of the study demonstrated that the catalytic activities of Pd catalyst supported on CCS/PEO fiber (Pd-CCS/PEO fiber) were highly dependent on the concentration of glutaraldehyde in the cross-linking process. Density functional theory (DFT) calculations indicated that the Schiff bond formed between CS and glutaraldehyde could reduce the energy needed to form a chelate complex between the CCS/PEO fibers and palladium active species. This in turn could decrease the activation energy of the Mizoroki–Heck reactions which occur in the presence of the Pd-CCS/PEO fiber catalysts. The optimized Pd-CCS/PEO fiber catalyst was very efficient and stable in the Mizoroki–Heck reaction of aromatic iodides with olefins.     

Metal-organic-framework-derived formation of Co–N-doped carbon materials for efficient oxygen reduction reaction

Non-precious metal nitrogen-doped carbonaceous materials have attracted tremendous attention in the field of electrochemical energy storage and conversion. Herein, we report the designed synthesis of a novel series of Co-N-C nanocomposites and their evaluation of electrochemical properties. Novel yolkshell structured Co nanoparticles@polymer materials are fabricated from the facile coating polymer strategy on the surface of ZIF-67. After calcination in nitrogen atmosphere, the Co–N–C nanocomposites in which cobalt metal nanoparticles are embedded in the highly porous and graphitic carbon matrix are successfully achieved. The cobalt nanoparticles containing cobalt metal crystallites with an oxidized shell and/or smaller(or amorphous) cobalt-oxide deposits appear on the surface of graphitic carbons. The prepared Co–N–C nanoparticles showed favorable electrocatalytic activity for oxygen reduction reactions,which is attributed to its high graphitic degree, large surface area and the large amount existence of Co–N active sites.     

(±)-Camphor-10-sulfonic acid as recyclable and efficient catalyst for the synthesis of some novel coumarin derivatives

A highly competent-diversity oriented synthesis of coumarin core derivatives using a Knoevenagel condensation followed by Michael addition and subsequent cyclization in the presence of (±)-camphor-10-sulfonic acid in a water/ethanol (1:1) solvent system is depicted. Furthermore, easy workup procedures with good yield, rapid reactions with high atom economy, and catalyst recyclability are the fascinating features of the procedure.     

Bimetallic Cu–Pt/nanoporous carbon composite as an efficient catalyst for methanol oxidation

A novel bimetallic Cu–Pt nanoparticle supported onto Cu/indirectly carbonized nanoporous carbon composite (Cu–Pt/ICNPCC) was prepared through a two-step process: first, carbonization of furfuryl alcohol-infiltrated MOF-199 [metal–organic framework Cu₃(BTC)₂ (BTC?=?1,3,5-benzene tricarboxylate)], without removing the Cu metal with HF aqueous solution; second, the partial galvanic replacement reaction (GRR) of Cu nanoparticles by Pt^IV upon immersion in a platinum(IV) chloride solution. The synthesized materials characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), and electrochemical methods. The EDS result revealed that part of Cu nanoparticles have been substituted by Pt nanoparticles after GRR. The methanol oxidation at the surface of Cu–Pt/ICNPCC was investigated by cyclic voltammetry method in 0.5 M H₂SO₄ and indicated good electro-catalytic activity towards methanol oxidation (E_p?=?0.85 V vs. NHE and j_f?=?1.00 mA cm^?2). It is suggested that this improvement is attributed to the effect of proper Cu/ICNPCC for fine dispersion, efficient adhesion, and prevention of Pt coalescing.     

Environment friendly hydrothermal synthesis of carbon–Co_3O_4 nanorods composite as an efficient catalyst for oxygen evolution reaction

The design of cost-effective, highly active catalysts for hydrogen energy production is a vital element in the societal pursuit of sustainable energy. Water electrolysis is one of the most convenient processes to produce high purity hydrogen. Cobalt-based catalysts are well-known electrocatalysts for oxygen evolution reaction(OER). In this article, all these merits indicate that the present cobalt nanocomposite is a promising electrocatalyst for OER. C–Co_3O_4-nanorods catalyst with nanorod structure was synthesized by hydrothermal treatment of CoCl_2·6H_2O/dextrose/urea mixture at 180 °C for 18 h and then calcined at400 °C for 3.5 h. The role of dextrose percentage in solution to achieve the uniform coating of carbon on the surface of Co_3O_4-nanorods has been demonstrated. The prepared materials were characterized by X-ray diffraction(XRD), X-ray photoelectron spectrum(XPS), field emission scanning electron microscopy(FE-SEM), high-resolution transmission electron microscopy(HR-TEM), and Brunauer–Emmett–Teller instrument(BET). Due to its unique morphology, the C–Co_3O_4-nanorods catalyst exhibited better activity than Co_3O_4-microplates catalyst for OER in 1 M KOH aqueous solution. The results showed a highly efficient, scalable, and low-cost method for developing highly active and stable OER electrocatalysts in alkaline solution.