Highly efficient esterification of carboxylic acids with alcohols by montmorillonite-enwrapped titanium as a heterogeneous acid catalyst

Montmorillonite-enwrapped titanium catalyst was found to efficiently promote the esterification of carboxylic acids with alcohols. In comparison to other catalysts reported to date, this heterogeneous catalyst offers a remarkably simple workup procedure, and is reusable without any appreciable loss in its activity and selectivity.     

ZrOCl2 x 8H2O: an efficient, cheap and reusable catalyst for the esterification of acrylic acid and other carboxylic acids with equimolar amounts of alcohols

Esterifications of carboxylic acids with equimolar amount of alcohols could be efficiently catalyzed by ZrOCl(2) x 8H(2)O. Acrylate esters were obtained in good yields under solvent-free conditions at ambient temperature. The esterification of other carboxylic acids with alcohols also proceeded at ambient temperature or at 50 oC to afford esters in high yields. If the esterification was performed in toluene under azeotropic reflux conditions to remove water, both the catalytic activity of ZrOCl(2) x 8H(2)O and the rate of esterification could be increased greatly. Furthermore, in the present catalytic system, the esters could be easily separated from the reaction mixtures and the catalyst could be easily recovered and reused.     

Direct atom-efficient esterification between carboxylic acids and alcohols catalyzed by amphoteric, water-tolerant TiO(acac)2

A diverse array of oxometallic species were examined as catalysts for a test direct condensation of benzoic acid and 2-phenylethanol in 1:1 stoichiometry. Besides group IVB MOCl2-xH2O and TiOX2-xH2O, group VB VOCl2-xTHF and group IVB TiO(acac)2 were found to be the most efficient and water-tolerant catalysts for the test reaction. The new neutral catalytic protocol with the optimal TiO(acac)2 tolerates many stereo/electronic structural variations in both (di)acid (1 degree -3 degrees alkyl and aryl) and (di)alcohol (1 degree, 2 degrees alkyl, and aryl) components with high chemoselectivity.     

Novel Brønsted acidic deep eutectic solvent as reaction media for esterification of carboxylic acid with alcohols

New halogen-free Brønsted acidic deep eutectic solvents (DES) have been prepared by mixing new quaternary ammonium methanesulfonate salts with p-toluenesulfonic acid (PTSA). They have been used as dual solvent-catalyst for esterification of several carboxylic acids with different alcohols with a reagent molar ratio of 1:1. The method is mild, safe, and simple. Ease of recovery and reusability of DES with high activity makes this method efficient and eco-friendly. The tunability of DES properties, attained by changes in the cation, was performed in order to achieve various esters in good yields.     

Di-2-pyridyl carbonate: a new efficient coupling agent for the direct esterification of carboxylic acids

Reaction of carboxylic acids with equimolar amounts of di-2-pyridyl carbonate and alcohols or thiols in the presence of 4-dimethylamino pyridine as a catalyst in methylene chloride at room temperature affords the corresponding esters in high yields under mild conditions.     

Sulfonic acid functionalized poly(ethylene glycol dimethacrylate-1-vinyl-1,2,4-triazole) as a high-performance solid acid catalyst for the esterification of lactic acid with methanol

Sulfonic acid functionalized poly(ethylene glycol dimethacrylate-1-vinyl-1,2,4-triazole), poly(EGDMA-VTAZ-SO(3)H), is evaluated in the esterification of lactic acid with methanol. From nitrogen physisorption data, high surface area (220 m(2)/g) and type IV isotherm are obtained. Conversion measurements indicate a stronger interaction of poly(EGDMA-VTAZ-20%SO(3)H) with water molecules than that occurring in poly(EGDMA-VTAZ-10%SO(3)H). Hence, the higher catalytic activity of poly(EGDMA-VTAZ-10%SO(3)H) is related to the more hydrophobic microenvironment of -SO(3)H sites, which reduces the acid site deactivation associated with adsorption of water generated during the reaction. Moreover, apparent activation energy is found to be 48.02 kJ mol(-1), which can be comparable with the literature values.     

New and efficient method for esterification of carboxylic acids with simple primary and secondary alcohols using cerium(IV) ammonium nitrate (CAN)

The esterification of phenylacetic acids and cis-oleic acid with primary and secondary simple alcohols, which also act as solvents using cerium(IV) ammonium nitrate (CAN) at room temperature gave phenylacetates and methyl (9Z)-octadec-9-enoate. The reactions, which occur under relatively mild conditions, afforded the desired products in good to excellent yields.     

Heteropolyacid anchored on SBA-15 functionalized with 2-aminoethyl dihydrogen phosphate: a novel and highly efficient catalyst for one-pot,three-component synthesis of trisubstituted 1,3-thiazoles

Heteropolyacid anchored on SBA-15 functionalized with 2-aminoethyl dihydrogen phosphate (SBA-15@AEPH₂-HPA) was synthesized as a novel and highly efficient heterogeneous mesoporous catalyst. Characterization of the as-synthesized catalyst was successfully performed using various techniques such as FT-IR, BET, small-angle XRD, SEM, EDX, TEM, TGA, ICP-OES and elemental analysis. The new catalyst revealed a superb catalytic activity towards the one-pot synthesis of a wide verity of trisubstituted 1,3-thiazole derivatives. This protocol involved the three-component reactions of arylglyoxals, cyclic 1,3-dicarbonyls and thioamides under mild reaction conditions. Surprisingly, the current methodology is far superior to the only literature precedent used in this regard. The most promising features which highlight the presented approach are: furnishing a very important class of pharmaceutically and biologically active 1,3-thiazoles in excellent yields within short reaction times, mildness of the reaction conditions, using water as the reaction media and facile catalyst reusability for at least nine successive runs without any appreciable loss of its activity. Importantly, the small-angle XRD analysis and TEM images of the 9th recovered catalyst clearly proved the privileged durability and stability of the introduced catalytic system, under the applied reaction condition.     

Supported ruthenium hydride catalysts for direct conversion of alcohols to carboxylic acids using styrene oxide as oxidant

In the present work, the ability of two ruthenium hydride catalysts supported on multiwall carbon nanotubes, [Ru–H@EDT–MWCNT], and gold nanoparticles cored triazine dendrimer, [Ru–H@AuNPs–TD], in the direct conversion of alcohols to carboxylic acids via transfer hydrogenation using styrene oxide as oxidant is reported. Different alcohols were successfully converted to their corresponding carboxylic acids. The results showed that these two heterogeneous catalysts are more efficient than the homogeneous counterpart. In addition, the catalysts were reused several times.     

A metal-organic framework functionalized with free carboxylic acid sites and its selective binding of a Cl(H2O)4(-) cluster

A metal-organic framework with one-dimensional channels decorated with -COOH binding sites was synthesized under aqueous acidic conditions, which inhibited the participation of these groups to metal coordination or self-association by hydrogen bonding. This material selectively includes Cl(H2O)4- clusters in its channels, as revealed by single-crystal X-ray diffraction analysis, which represents the first structural characterization of such a water-chloride cluster.     

Al(H2PO4)3 as an efficient and reusable catalyst for the multi-component synthesis of highly functionalized piperidines and dihydro-2-oxypyrroles

Extremely facile and efficient procedures have been developed for the synthesis of highly functionalized piperidines and dihydro-2-oxypyrroles via one-pot multi-component reactions in the presence of Al(H₂PO₄)₃ as a heterogeneous and eco-friendly catalyst under mild conditions. The multi-component reaction of aromatic aldehydes, aromatic amines, and β-keto esters catalyzed by Al(H₂PO₄)₃ in EtOH at room temperature provides highly functionalized piperidines in good to excellent yields. The structure as well as the relative stereochemistry of these functionalized piperidines was confirmed by single X-ray crystallographic analysis. The same catalyst was found useful for the synthesis of polyfuntionalized dihydro-2-oxypyrroles using a four-component reaction of amines, dialkyl acetylenedicarboxylates and formaldehyde in MeOH at ambient temperature. It is found that the catalyst is recyclable and can be used up to five times without significant loss of its activity.     

Cellulose microfiber functionalized with N,N'-bis (2-aminoethyl)-1,2-ethanediamine as a solid sorbent for the fast preconcentration of Cd(II) in flow system analysis

The present paper describes the synthesis of a new chemically modified cellulose microfiber through oxidation with sodium periodate and functionalization with N,N′-bis (2-aminoethyl)-1,2-ethanediamine for the fast and selective preconcentration of Cd(II) ions in flow system analysis. The new sorbentsorbent was characterized by FTIR, SEM, and surface area values. The uptake behavior of Cd(II) ions onto this sorbent was evaluated from kinetic data, pseudo-first-order and pseudo-second-order models, as well as from Langmuir, Freundlich and Langmuir-Freundlich adsorption isotherms. The maximum sorption capacity of 4.59 mg g⁻¹ was estimated by the Langmuir-Freundlich model with fast kinetics for the sorption of Cd(II) described by the pseudo-second-order kinetic model. After characterization, the sorbent was packed in a mini-column, and a fast flow injection preconcentration system for Cd(II) determination by FAAS was developed. The best Cd(II) preconcentration condition, obtained by means of factorial design and response surface methodology, was achieved at pH 9.36 and a flow rate of 10 mL min⁻¹ followed by elution with 1.0 mol L⁻¹ nitric acid. By using 78 s preconcentration time, fast and highly sensitive determination of Cd(II) ions could be achieved with a limit of quantification of 0.20 μg L⁻¹, preconcentration factor of 26, consumption index of 0.5 mL, concentration efficiency of 20 min⁻¹, and sample throughput of 39 h⁻¹. The repeatability for 10 replicate determinations was found to be 7.8 and 2.5% for Cd(II) ion concentrations of 5.0 and 100.0 μg L⁻¹, respectively. The new sorbent efficiency for the interference-free preconcentration of Cd(II) ions was assessed by analysis of tap, mineral and lake waters, as well as synthetic seawater and normal saline waters. Furthermore, complex samples, such as biological samples, could be analysed by the proposed method in accordance with the accuracy attested by analysis of certified reference materials, TORT-2 (lobster hepatopancreas), and DOLT-4 (dogfish liver).     

(R)-(+)-N-methylbenzoguanidine ((R)-NMBG) catalyzed kinetic resolution of racemic secondary benzylic alcohols with free carboxylic acids by asymmetric esterification

(R)-(+)-N-Methylbenzoguanidine ((R)-NMBG) was found to function as an efficient acyl-transfer catalyst for the kinetic resolution of racemic secondary benzylic alcohols in the presence of achiral carboxylic acids and pivalic anhydride. The use of a tertiary amine in this reaction is not necessary to attain good chemical yields of the products. It was determined that diphenylacetic acid could be employed as the most suitable acyl donor for achieving a high enantioselectivity for the kinetic resolution of the racemic secondary benzylic alcohols having normal aliphatic alkyl chains at the C-1 positions. On the other hand, a less-hindered carboxylic acid, such as 3-phenylpropanoic acid, functioned as a better acyl donor for the kinetic resolution of racemic secondary benzylic alcohols having branched aliphatic alkyl chains at the C-1 positions.     

Synthesis of benzimidazole and quinoxaline derivatives using reusable sulfonated rice husk ash (RHA-SO3H) as a green and efficient solid acid catalyst

Research on Chemical Intermediates - In this work, a simple, rapid and efficient method for the preparation of benzimidazoles and quinoxalines from the condensation of o-phenylene diamines with...     

Al(HSO4)3 and Al2O3-SO3H as Efficient Catalysts for Modified Preparation of 3,4-Dihydropyrimidin-2 (1H)-ones/thiones

An environmentally friendly procedure for the preparation of dihydropyrimidinone derivatives or their sulfur analogues under thermal solvent-free conditions in the presence of aluminium hydrogen sulfate [Al(HSO₄)₃] and alumina sulfuric acid (Al₂O₃-SO₃H) as heterogeneous catalysts was developed.     

An expedient route for the reduction of carboxylic acids to alcohols employing 1-propanephosphonic acid cyclic anhydride as acid activator

A simple and efficient method for the synthesis of alcohols from the corresponding carboxylic acids is described. Activation of carboxylic acid with 1-propanephosphonic acid cyclic anhydride (T3P) and subsequent reduction using NaBH₄ yield the alcohol in excellent yields with good purity. Reduction of several alkyl/aryl carboxylic acids and N^α-protected amino acids/peptide acids as well as N^β-protected amino acids was successfully carried out to obtain corresponding alcohols in good yields. All the products were fully characterized by ¹H NMR and mass spectral analyses. The procedure is mild, simple and the isolation of the products is easy.     

Repurposing n-butyl stannoic acid as highly efficient catalyst for direct amidation of carboxylic acids with amines

This is the first-time report on the repurposing n-butyl stannoic acid as a catalyst for direct amidation of carboxylic acids with amines. Notably, efficient amidation observed in comparison with all other catalytic methods reported up until now. The protocol has successfully applied to the synthesis of a variety of amides. Moderate reaction parameters, clean amidation with excellent yields of desired amides, ability to tolerate a variety of functional groups, easy product isolation; commercial availability and recyclability of the catalyst are key advantages of the current protocol.