A simple method of electrochemical lithium intercalation within graphite from a propylene carbonate-based solution

Electrochemical lithium intercalation within graphite from 1 mol dm^− 3 solution of LiClO₄ in propylene carbonate (PC) was investigated at 25 and − 15 °C. Lithium ions were intercalated into and de-intercalated from graphite reversibly at − 15 °C despite the use of pure PC as the solvent. However, ceaseless solvent decomposition and intense exfoliation of graphene layers occurred at 25 °C. The results of the Raman spectroscopic analysis indicated that the interaction between PC molecules and lithium ions became weaker at − 15 °C by chemical exchange effects, which suggested that the thermodynamic stability of the solvated lithium ions was an important factor that determined the formation of a solid electrolyte interface (SEI) in PC-based solutions. Charge–discharge analysis revealed that the nature of the SEI formed at − 15 °C in 1 mol dm^− 3 of LiClO₄ in PC was significantly different from that formed at 25 °C in 1 mol dm^− 3 of LiClO₄ in PC containing vinylene carbonate, 3.27 mol kg^− 1 of LiClO₄ in PC, and 1 mol dm^− 3 of LiClO₄ in ethylene carbonate.     

Temperature and sodium chloride effects on the solubility of anthracene in water

The solubility of anthracene was measured in pure water and in sodium chloride aqueous solution (salt concentration, m/mol · kg^?1 = 0.1006, 0.5056, and 0.6082) at temperatures between (278 and 333) K. Solubility of anthracene in pure water agrees fairly well with values reported in earlier similar studies. Solubility of anthracene in sodium chloride aqueous solutions ranged from (6 · 10^?8 to 143 · 10^?8) mol · kg^?1. Sodium chloride had a salting-out effect on the solubility of anthracene. The salting-out coefficients did not vary significantly with temperature over the range studied. The average salting-out coefficient for anthracene was 0.256 kg · mol^?1.The standard molar Gibbs free energies, Δ_trG°, enthalpies, Δ_trH°, and entropies, Δ_trS°, for the transfer of anthracene from pure water to sodium chloride aqueous solutions were also estimated. Most of the estimated Δ_trG° values were positive [(20 to 1230) J · mol^?1]. The analysis of the thermodynamic parameters shows that the transfer of anthracene from pure water to sodium chloride aqueous solution is thermodynamically unfavorable, and that this unfavorable condition is caused by a decrease in entropy.     

Electrochemical properties of Li(Li(1−x)/3CoxMn(2−2x)/3)O2 (0 ⩽ x ⩽ 1) solid solutions prepared by poly-vinyl alcohol (PVA) method

The whole range of solid solutions Li(Li_(1−x)/3Co_xMn_(2−2x)/3)O₂ (0 ⩽ x ⩽ 1) was firstly synthesized by an aqueous solution method using poly-vinyl alcohol as a synthetic agent to investigate their structure and electrochemical properties. X-ray diffraction results indicated that the synthesized solid solutions showed a single phase without any detectable impurity phase and have a hexagonal structure with some additional peaks caused by monoclinic distortion, especially in the solid solutions with a low Co amount. In the electrochemical examination, the solid solutions in the range between 0.2 ⩽ x ⩽ 0.9 showed higher discharge capacity and better cyclability than LiCoO₂ (x = 1) on cycling between 2.0 and 4.6 V with 100 mA g⁻¹ at 25 °C. For example, Li(Li_0.2Co_0.4Mn_0.4)O₂ (x = 0.4) exhibited a high discharge capacity of 180 mA h g⁻¹ at the 50th cycle. By synthesizing the solid solution between Li₂MnO₃ and LiCoO₂, the electrochemical properties of the end members were improved.     

Increasing the efficiency of silicon and aluminum extraction from Volclay by a water iteration treatment for the synthesis of MCM-41 nanomaterials

This work aims to reduce the prices of a wide range of nanomaterials which are unreachable in the industry by using natural sources as silicon and aluminum precursors. In a previous work, silicon and aluminum have been extracted from Volclay after applying the alkaline fusion process at 550 °C, and a water treatment of this fused clay by adopting a weight ratio (1:4, fusion mass:H₂O) to synthesize Al-MCM-41 nanomaterials. In this study, the weight ratio of fusion mass:H₂O was increased to 1:8 to synthesize a highly structurally ordered MCM-41 under the same reaction conditions. The Al-MCM-41 nanomaterials are investigated by inductively coupled plasma optical emission spectrometry (ICP–OES), powder X-ray diffraction (XRD), N₂ adsorption–desorption measurements and scanning electron microscopy (ESEM). As a result, the increase in the weight ratio fusion mass:H₂O generates more silica and aluminum, which allows the formation of well-ordered MCM-41 nanomaterials with high pore volume (0.70 cm³/g), high surface area (1044 m²/g), and uniform mesoporous diameter (3.67 nm); as a consequence, the increase in the weight ratio fusion mass:H₂O leads to an increase in the mass of Al-MCM-41 (9.3 g for 1:8 compared to 5 g for 1:4), whereas the yield of production of mesoporous materials increases to 86%.     

Dense-gas fractionation of mixtures of petroleum macromolecules

Dense-gas extraction (DGE) was used to fractionate a petroleum pitch feedstock of broad molecular weight distribution (MWD) into selected oligomeric constituents. The DGE process was carried out in a semibatch mode using the solvent toluene (T_c = 318.6 °C, P_c = 41.1 bar) and a pitch charge of 10–15 g. A packed column with reflux produced the equivalent of several equilibrium stages. The apparatus was operated at near and supercritical temperatures, with the stillpot at 320 °C and the column temperature increasing linearly up to the reflux condenser temperature of 360 °C. Operating pressures were determined by the conditions required to extract a given oligomer and varied from 44 to 84 bar. Using a monomer-rich petroleum pitch feed (MW_n = 299, PDI = 1.10), a dimer-rich extract with a purity approaching 90% (MW_n = 521, PDI = 1.07) was obtained, with the remaining residue (MW_n = 883, PDI = 1.24) consisting of 95% trimer and higher oligomers. MALDI-TOF mass spectrometry was used to determine the MWD of the feed pitch and pitch fractions, with a unique matrix being used to enhance the response of higher MW species. The combination of DGE for separation and MALDI for accurate MW information is a powerful new technique for the molecular characterization of insoluble, high MW fossil fuels.     

Vesicle stability in aqueous mixtures of zwitterionic/anionic surfactants

It was studied that the influences of the aging, temperature, addition of the polymer and cosolvent on the stability of the vesicles spontaneously formed in the mixtures of zwitterionic surfactant (dodecyl carboxyl betaine, C₁₂BE) and double-tailed anionic surfactant (sodium bis(2-ethylhexyl) sulfosuccinate, AOT) under the inducement of salt by means of freeze-fracture and negative-staining transmission electron microscopy (TEM), dynamic light scattering (DLS) and turbidity measurements. It is found that the vesicles can exist over a long period of aging (about 300 days) at room temperature, show good stability after a heating–cooling cycle of 90–25 °C and a freeze–thaw cycle of −10 to 25 °C, respectively, and may be transformed from spherical vesicles to tubelike structures induced by high temperature 90 °C. Under the effect of (PEO)₁₃(PPO)₃₀(PEO)₁₃ (L64), the transition from unilameller vesicles to large multivesicular vesicles. The presence of ethanol may decrease the stability of vesicles, resulting in the fusion among vesicles to form large vesicles. The excessive amount of ethanol may destroy the vesicles, and the order of ability of destroying vesicles was obtained to be C₅H₁₁OH > C₄H₉OH > C₃H₇OH > C₂H₅OH > CH₃OH.     

Preferential crystallization in an unusual case of conglomerate with partial solid solutions

Ethanolamine mandelate (E.M.) crystallizes as a stable conglomerate and has been found to form partial solid solutions. The crystal structure of the pure enantiomer has been solved from single-crystal X-ray diffraction. In order to determine the extreme compositions of the partial solid solutions in equilibrium (87% ee), the isothermal ternary section in the system [(+)-E.M.–(−)-E.M.–(ethanol–water azeotropic mixture)] was established at 25 °C. Several consecutive preferential crystallization attempts (AS3PC method) were undertaken between T_B = 41 °C (starting temperature) and T_F = 25 °C (final temperature) on a 2-L scale.We initially expected to obtain crude crops whose enantiomeric purities would be close to that defined by the isothermal ternary phase diagram (T_F). In fact, the filtered solid phases are of lower enantiomeric excesses: ca. 62% ee. The monitoring of the mother liquor composition over the course of the entrainment shows that the enantiomeric composition of the filtered solid is related to the metastable equilibria involved in the preferential crystallization.     

Stereospecific polymerization of propylene with group 4 ansa-fluorenylamidodimethyl complexes

Group 4 [η¹:η³-tert-butyl(dimethylfluorenylsilyl)amido]dimethyl complexes [t-BuNSiMe₂Flu]MMe₂ (M = Ti, 1; Zr, 2; Hf, 3) were synthesized in a one-pot synthesis starting from the ligand, MeLi and MCl₄ (M = Ti, Zr, Hf), respectively. The structures of these complexes were determined by X-ray crystallography and the results obtained revealed that the fluorenyl ligand coordinates to center metal in a η³-manner irrespective of center metal employed. Propylene polymerization was conducted at 0 or 20 °C in toluene by 1–3 combined with dried methylaluminoxane (MAO), which was prepared from the toluene solutions of MAO by removing free trialkylaluminiums, and HNMe₂PhB(C₆F₅)₄ in the presence of triisobutylaluminium. The 1–dried MAO system gave the polymer with syndiotactic triad (rr) of 63% at 0 °C, whereas 2 and 3 did not give any polymer in the same conditions. The 2–dried MAO system gave the polymer with the highest syndiotacticity (rr = 97%) at 20 °C, although the activity was low. The 3–dried MAO system did not give any polymer even at 20 °C. When HNMe₂PhB(C₆F₅)₄ was used in place of dried MAO at 20 °C, 1 gave almost atactic polymer, while 2 and 3 gave highly syndiotactic one (rr > 90%). These results indicate that the catalytic performance strongly depended on the center metal of the ansa-fluorenylamidodimethyl complexes as well as cocatalysts employed.     

Phase transitions of CaTiO3 ceramics sintered with the aid of NaF and MgF2

New phases with initial composition (1 ? x)CaTiO₃ ? xNaF ? xMgF₂ (0 ≤ x ≤ 0.20) have been prepared at low temperature (950 °C) from mixtures of CaTiO₃ and fluorides NaF and MgF₂. The oxyfluorides obtained have been characterized by X-ray diffraction at room temperature and indexed by isotypy with orthorhombic CaTiO₃. The microstructures of these phases are observed by scanning electron microscopy. Dielectric measurements have been carried out during cooling cycle from 500 °C to room temperature at two frequencies (100 Hz, 1 kHz). Differential scanning calorimetry (DSC), thermogravimetry (TG) and differential thermogravimetry (DTG) analyses have been performed, respectively, from room temperature up to 550 °C (DSC) and 920 °C (TG–DTG). The dielectric measurements revealed two anomalies which have been confirmed by DSC analyses. These phenomena are ascribed to second order phase transitions. The variation of the real permittivity with temperature is in agreement with the class I capacitor specifications. However, the dielectric losses have to be improved.     

Mixed ligand complexes of [Pd(terpy)(H2O)]2+ with some selected amino acids,peptides, DNA and related ligands

Stability constants of the ternary palladium(II) complexes of triamine 2,2′:6′,2″-terpyridine (terpy) and some amino acids, peptides, DNA constituents or thiols were determined at 25 °C and at constant 0.1 mol dm⁻³ ionic strength, adjusted using NaNO₃. The coordination sites are pH-dependent. The results show the formation of binuclear species, 210. The speciation diagrams of various complex species were evaluated as a function of pH. Good correlations were found between the stability constants of the complexes and basicity of ligands.     

Calorimetric and computational study of 7-hydroxycoumarin

The standard (p° = 0.1 MPa) molar energy of combustion in oxygen, at T = 298.15 K, of 7-hydroxycoumarin was measured by static bomb calorimetry. The value of the standard molar enthalpy of sublimation was obtained by Calvet microcalorimetry and corrected to T = 298.15 K. Combining these results, the standard molar enthalpy of formation of the compound, in the gas phase, at T = 298.15 K, has been calculated, ?(337.5 ± 2.3) kJ · mol^?1. The values for the temperature of fusion, T_fusion, and for the fusion enthalpy, at T = T_fusion, are also reported.Additionally, high-level density functional theory calculations using the B3LYP hybrid exchange-correlation energy functional with extended basis sets, the MC3BB and MC3MPW methods and more accurate correlated computational techniques of the MCCM suite have been performed for the compound.The agreement between experiment and theory gives confidence to estimate the enthalpy of formation of the remaining hydroxycoumarins substituted in the benzene ring.     

Electrochemical kinetics of the hydrogen reaction on platinum in concentrated HCl(aq)

The hydrogen reaction in concentrated HCl(aq) solutions is a key reaction for the CuCl(aq)/HCl(aq) electrolytic cell. Here, electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) were used to obtain new data for the hydrogen reaction on platinum submerged in highly concentrated acidic solutions at 25 °C and 0.1 MPa. LSV and EIS data were collected for Pt in 0.5 mol/L H₂SO₄(aq), 1 mol/L HCl(aq) and 7.71 mol/L HCl(aq) solutions. It was found that exchange current density (j₀) values varied between 1 and 2 mA/cm². An equivalent circuit model was used to obtain comparable j₀ and limiting current density values from EIS data relative to values obtained with LSV data. It was found that as the concentration of acid increased, a noticeable decrease in the performance was observed.     

Syntheses and structures of the MOF-type series of metal 1,4,5,8,-naphthalenetetracarboxylates M2(OH)2[C14O8H4] (Al,Ga, In) with infinite trans-connected M–OH–M chains (MIL-122)

Three new isostructural MOF-type compounds (named MIL-122) have been obtained from the hydrothermal reaction at 210 °C for 24 h of the 1,4,5,8-naphthalenetetracarboxylic acid with aluminum, gallium or indium source in water. The structures of the compounds M₂(OH)₂[C₁₄H₄O₈] (M = Al, Ga, In) have been solved ab initio from powder X-ray diffraction analysis using the synchrotron radiation (Soleil; station CRISTAL). The three-dimensional organic–inorganic framework exhibits infinite straight chains of metal-centered octahedra sharing trans corners linked to each other through the 1,4,5,8-naphthalenetetracarboxylate ligand. The cations Al, Ga or In, are coordinated by four oxygen atoms coming from the carboxyl groups and two bridging hydroxyl groups μ₂-OH, located in trans position in the octahedral surrounding. The compounds characterized by thermogravimetric and thermodiffraction analyses are thermally stable up to 440, 460 and 380 °C, for Al, Ga and In, respectively. Crystal data: monoclinic cell; P2₁/c (n°14); for MIL-122 (Al): a = 9.5174(2), b = 10.0706(1), c = 6.6465(2) Å, β = 91.2614(5)°, V = 636.878(2) Å³, Z = 2; for MIL-122 (Ga): a = 9.6501(1), b = 10.0585(1), c = 6.75069(9) Å, β = 92.4786(9)°, V = 654.65(1) Å³, Z = 2; for MIL-122 (In): a = 9.92359(5), b = 10.19765(7), c = 7.19357(4) Å, β = 727.034(8)°, V = 727.034(8)ų, Z = 2.     

Effects of calcination and activation temperature on dry reforming catalysts

The effect of calcination temperatures on dry reforming catalysts supported on high surface area alumina Ni/γ-Al₂O₃ (SA-6175) was studied experimentally. In this study, the prepared catalyst was tested in a micro tubular reactor using temperature ranges of 500, 600, 700 and 800 °C at atmospheric pressure, using a total flow rate of 33 ml/min consisting of 3 ml/min of N₂, 15 ml/min of CO₂ and 15 ml/min of CH₄. The calcination was carried out in the range of 500–900 °C. The catalyst is activated inside the reactor at 500–800 °C using hydrogen gas. It was observed that calcination enhances catalyst activity which increases as calcination and reaction temperatures were increased. The highest conversion was obtained at 800 °C reaction temperature by using catalyst calcined at 900 °C and activation at 700 °C. The catalyst characterization conducted supported the observed experimental results.     

Electrochemical properties of Li symmetric solid-state cell with NASICON-type solid electrolyte and electrodes

All-solid-state phosphate symmetric cells using Li₃V₂(PO₄)₃ for both the positive and negative electrodes with the phosphate Li_1.5Al_0.5Ge_1.5(PO₄)₃ as the solid electrolyte were proposed. Amorphous Li_1.5Al_0.5Ge_1.5(PO₄)₃ was added into the electrode to increase the interface area between the active materials and the electrolyte. Any other phases were not formed at the electrode/electrolyte interface even after hot pressing at 600 °C. The discharge capacity was 92 mAh g^? 1 at 22 µA cm^? 2 at 80 °C, and 38 mAh g^? 1 at 25 °C, respectively. Symmetric cell configuration leads to simplify the fabrication process for all-solid-state batteries and will reduce manufacturing costs.     

Synthesis and X-ray structures of heptanuclear and decanuclear mixed-metal sulfido clusters containing noble metals and Group 15 metals

Reactions of incomplete cubane-type clusters [(Cp°RuCl)₂(μ-SH)(μ-SM′Cl₂)] (M′ = Sb (2a), Bi; Cp° = η⁵-C₅Me₄Et) with 0.5 equiv of [PdCl₂(cod)] (cod = 1,5-cyclooctadiene) afforded the corner-shared double cubane-type clusters [{(Cp°Ru)(Cp°RuCl)(μ-SM′Cl₂)}₂(μ₃-S)₂(μ-Cl)₂Pd] (3a: M′ = Sb, 3b: M′ = Bi) in moderate yields, whereas treatment of 2a with 0.75 equiv of [PdCl₂(cod)] gave the corner-shared triple cubane-type cluster [{(Cp°Ru)(Cp°RuCl)(μ-SSbCl₂)(μ₃-S)₂(μ-Cl)₂Pd}₂(Cp°Ru)₂] (4). Single-crystal X-ray analyses have disclosed the detailed structures of novel heptanuclear and decanuclear mixed-metal cores for 3a and 4, respectively.     

An investigation on the solid state pyrolytic decomposition of bimetallic oxalate precursors of Ca,Sr and Ba with cobalt: A mechanistic approach

The mixed metal oxalate precursors, calcium(II)bis(oxalato)cobaltate(II)hydrate (COC), strontium(II)bis(oxalato)cobaltate(II)pentahydrate (SOC) and barium(II)bis(oxalato)cobaltate(II)octahydrate (BOC) have been synthesized and their thermal stability was investigated. The complexes were characterized by elemental analysis, IR spectral and X-ray powder diffraction studies. Thermal decomposition studies (TG, DTG and DTA) in air showed that the compound COC decomposed mainly to CaC₂O₄ and Co₃O₄ at 340 °C, and a mixture of CaCO₃ and Co₃O₄ identified at 510 °C. A mixture of CaCO₃ and Ca₃Co₂O₆ along with the oxides and carbides of both the cobalt and calcium were attributed at 1000 °C as end products. DSC study in nitrogen ascertained the formation of a mixture of CaO and CoO along with a trace of carbon at 550 °C. The mixture species, SrC₂O₄, CoC₂O₄ and Co₃O₄ were generated at 255 °C in case of SOC in air, which ultimately changed to CoSrO₃, SrCO₃ and oxides of strontium and cobalt at 1000 °C. The several mixture species also generated as intermediate at 332 and 532 °C. The DSC study in nitrogen indicated the formation of CoSrO_x (0.5 < x < 1) as end product. In case of BOC in air, a mixture of BaCoO₂, BaO, CoO and carbides are identified as end product at 1000 °C through the generation of several intermediate species at 350 and 530 °C. A mixture of BaO and CoO is identified as end product in DSC study in nitrogen. The kinetic parameters have been evaluated for all the dehydration and decomposition steps of all the three compounds using four non-mechanistic equations. Using seven mechanistic equations, the kind of dominance of kinetic control mechanism of the dehydration and decomposition steps are also inferred. The kinetic parameters, ΔH and ΔS of all the steps are explored from the DSC studies. Some of the decomposition products are identified by IR and X-ray powder diffraction studies.     

Low temperature synthesis of highly ion conductive Li7La3Zr2O12–Li3BO3 composites

Highly lithium ion conductive composites with Al-doped Li₇La₃Zr₂O₁₂ (LLZ) and amorphous Li₃BO₃ were prepared from sol–gel derived precursor powders of LLZ and Li₃BO₃. Precursor LLZ powders with cubic phase were obtained by a heat treatment of the precursor dried gel at 600 °C. Pellets of the mixture of the obtained LLZ and Li₃BO₃ were first held at 700 °C, and then successively sintered at 900 °C. Density of the sintered pellet with Li₃BO₃ was larger than that of the pellet without Li₃BO₃. From the TEM observation, the pellets were found to consist of cubic LLZ and amorphous Li₃BO₃. Total electrical conductivity of the obtained LLZ–Li₃BO₃ composite was 1 × 10^− 4 Scm^− 1 at 30 °C.     

Surface structures and electrochemical characteristics of surface-modified carbon anodes for lithium ion battery

Petroleum coke and those heat-treated at 1860 °C, 2100 °C, 2300 °C 2600 °C and 2800 °C (abbreviated as PC, PC1860, PC2100, PC2300, PC2600 and PC2800) were fluorinated by elemental fluorine of 3 × 10⁴ Pa at 200 °C and 300 °C for 2 min. Natural graphite powder samples with average particle sizes of 5 μm, 10 μm and 15 μm (abbreviated as NG5μm, NG10μm and NG15μm) were also fluorinated by ClF₃ of 3 × 10⁴ Pa at 200 °C and 300 °C for 2 min. Transmission electron microscopic (TEM) observation revealed that closed edge of PC2800 was destroyed and opened by surface fluorination, which increased the first coulombic efficiencies of PC2300, PC2600 and PC2800 by 12.1–18.2% at 60 mA/g and by 13.3–25.8% at 150 mA/g in 1 mol/dm³ LiClO₄–ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1 in volume). Light fluorination of NG10μm and NG15μm increased the first coulombic efficiencies by 22.1–28.4% at 150 mA/g in 1 mol/dm³ LiClO₄–EC/DEC/PC (PC: propylene carbonate, 1:1:1 in volume).