放射性核素~(55)Fe和~(63)Ni测定方法研究进展

对国内测定放射性核素~(63)Ni及国外测定放射性核素~(55)Fe和~(63)Ni的测定方法的研究进展进行了综述(引用文献30篇)。     

Synthesis and properties of one-dimensional Ni(Ⅱ) and Ni(Ⅱ)Cu(Ⅱ) complexes linked by hydrogen bond

Four dithiooxalato (Dto) bridged one-dimensional Ni(ll) and Ni(ll)Cu(ll) complexes (Me6[14]dieneN4)Ni2(Dto)2) (1), (Me6[14]dieneN4)CuNi(Dto)2 (2), (Me6[14]aneN4)Ni2(Dto)2 (3), and (Me6[14]aneN4)CuNi(Dto)2(4), were synthesized. These complexes have been characterized by elemental analysis, IR, UV and ESR spectra. The crystal structure of complex 3 was determined. It crystallizes in the monoclinic system, space group C2/c with a = 2.2425(4) nm, b = 1.0088(2) nm, c=1.4665(3) nm, β= 125.32(3)° ;Z=4; R = 0.076, Rw = 0.079. In the complex, Ni(1) coordinates four sulphur atoms of two Dto ligands in plane square environment. Ni(2) lies in the center of mac-rocyclic ligand. For Dto ligand, two sulphur atoms coordinate Ni(1), and O(1) coordinates Ni(2) and forms weak coordination bond. O(2) is linked to N(2) of macrocyclic ligand through hydrogen bond.     

57Fe Mössbauer spectroscopic and magnetic study of a spin-crossover polymer complex, Fe(3-chloropyridine)2Ni(CN)4

The coordination polymer Fe(3-chloropyridine)₂Ni(CN)₄ (2) has been prepared by a method similar to that for Fe(pyridine)₂Ni(CN)₄ (1). The complex (2) has been characterized by⁵⁷Fe Mössbauer spectroscopy and a SQUID technique.⁵⁷Fe Mössbauer and magnetic susceptibility data show that complex (2) exhibits spin-crossover behavior. The spin transition of (2) occurs between 120 and 80 K with very small hysteresis or without hysteresis. The temperature range of the spin transition in (2) is lower than that in (1). A residual high spin iron(II) fraction is observed at low temperatures in (2), being different from (1). SQUID data also show that samples treated differently yield different spin transition curves.     

Electrophilic Substitution Ni(II)→M(II) in Ni2[Fe(CN)6] Gelatin-immobilized Matrix Materials

The electrophilic substitution reactions Ni(II)M(II) (M = Co, Cu, Zn, Cd) occurring in nickel(II) hexacyanoferrate(II) gelatin-immobilized matrix materials on their contact with aqueous solutions of corresponding chlorides MCl2 were studied. During contact, Ni(II) is partly substituted by the other metal to form heteronuclear hexacyanoferrates(II) of nickel(II) and corresponding double-charged ions, and none of the studied reactions involves complete substitution of Ni(II) until the mononuclear hexacyanoferrate(II) M₂[Fe(CN)₆] has formed.     

A structural and Mössbauer study of complexes with Fe(2)(micro-O(H))(2) cores: stepwise oxidation from Fe(II)(micro-OH)(2)Fe(II) through Fe(II)(micro-OH)(2)Fe(III) to Fe(III)(micro-O)(micro-OH)Fe(III)

Dinuclear non-heme iron clusters containing oxo, hydroxo, or carboxylato bridges are found in a number of enzymes involved in O(2) metabolism such as methane monooxygenase, ribonucleotide reductase, and fatty acid desaturases. Efforts to model structural and/or functional features of the protein-bound clusters have prompted the preparation and study of complexes that contain Fe(micro-O(H))(2)Fe cores. Here we report the structures and spectroscopic properties of a family of diiron complexes with the same tetradentate N4 ligand in one ligand topology, namely [(alpha-BPMCN)(2)Fe(II)(2)(micro-OH)(2)](CF(3)SO(3))(2) (1), [(alpha-BPMCN)(2)Fe(II)Fe(III)(micro-OH)(2)](CF(3)SO(3))(3) (2), and [(alpha-BPMCN)(2)Fe(III)(2)(micro-O)(micro-OH)](CF(3)SO(3))(3) (3) (BPMCN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-trans-1,2-diaminocyclohexane). Stepwise one-electron oxidations of 1 to 2 and then to 3 demonstrate the versatility of the Fe(micro-O(H))(2)Fe diamond core to support a number of oxidation states with little structural rearrangement. Insight into the electronic structure of 1, 2', and 3 has been obtained from a detailed M?ssbauer investigation (2' differs from 2 in having a different complement of counterions). Mixed-valence complex 2' is ferromagnetically coupled, with J = -15 +/- 5 cm(-)(1) (H = JS(1).S(2)). For the S = (9)/(2) ground multiplet we have determined the zero-field splitting parameter, D(9/2) = -1.5 +/- 0.1 cm(-)(1), and the hyperfine parameters of the ferric and ferrous sites. For T < 12 K, the S = (9)/(2) multiplet has uncommon relaxation behavior. Thus, M(S) = -(9)/(2) <--> M(S) = +(9)/(2) ground state transition is slow while deltaM(S) = +/-1 transitions between equally signed M(S) levels are fast on the time scale of M?ssbauer spectroscopy. Below 100 K, complex 2' is trapped in the Fe(1)(III)Fe(2)(II) ground state; above this temperature, it exhibits thermally assisted electron hopping into the state Fe(1)(II)Fe(2)(III). The temperature dependence of the isomer shifts was corrected for second-order Doppler shift, obtained from the study of diferrous 1. The resultant true shifts were analyzed in a two-state hopping model. The diferric complex 3 is antiferromagnetically coupled with J = 90 +/- 15 cm(-)(1), estimated from a variable-temperature M?ssbauer analysis.     

Mo(W)-Co(Ni,Fe)簇合物的加氢脱硫催化活性

对线型、立方烷型和笼状３种不同构型的Ｍｏ（Ｗ）－Ｃｏ（Ｎｉ，Ｆｅ）－Ｓ（Ｏ）簇共１２种化俣物进行了噻吩加氢硫和环己烯加氢的催化活性研究，讨论了簇合物的组成，金属原子的配比、价态与催化活性的关系，探讨了不同构型对活性的影响。     

Alignment dependent chemisorption of vibrationally excited CH4(ν3) on Ni(100), Ni(110), and Ni(111)

We present a stereodynamics study of the dissociative chemisorption of vibrationally excited methane on the (100), (110), and (111) planes of a nickel single crystal surface. Using linearly polarized infrared excitation of the antisymmetric C-H stretch normal mode vibration (ν(3)), we aligned the angular momentum and C-H stretch amplitude of CH(4)(ν(3)) in the laboratory frame and measured the alignment dependence of state-resolved reactivity of CH(4) for the ν(3) = 1, J = 0-3 quantum states over a range of incident translational energies. For all three surfaces studied, in-plane alignment of the C-H stretch results in the highest dissociation probability and alignment along the surface normal in the lowest reactivity. The largest alignment contrast between the maximum and minimum reactivity is observed for Ni(110), which has its surface atoms arranged in close-packed rows separated by one layer deep troughs. For Ni(110), we also probed for alignment effects relative to the direction of the Ni rows. In-plane C-H stretch alignment perpendicular to the surface rows results in higher reactivity than parallel to the surface rows. The alignment effects on Ni(110) and Ni(100) are independent of incident translational energy between 10 and 50 kJ/mol. Quantum state-resolved reaction probabilities are reported for CH(4)(ν(3)) on Ni(110) for translational energies between 10 and 50 kJ/mol.     

Ion-Exchange Processes M(II) → Fe(III) and Fe(III) → M(II) in Metal Hexacyanoferrate(II) Gelatin-Immobilized Matrices (M = Mn,Co, Ni,Cu, Zn,Cd)

Ion-exchange reactions M²⁺ Fe³⁺ and Fe³⁺ M²⁺ (M = Mn, Co, Ni, Cu, Zn, Cd) were studied in metal(II) hexacyanoferrate(II) gelatin-immobilized matrices M₂[Fe(CN)₆] in contact with aqueous FeCl₃ solutions and Fe₄[Fe(CN)₆]₃ in contact with aqueous MCl₂ solutions. It was shown that in both cases, M²⁺ was replaced by Fe³⁺ and Fe³⁺ was replaced by M²⁺ to some extent, but no complete replacement was observed in the M₂[Fe(CN)₆]–FeCl₃ or Fe₄[Fe(CN)₆]₃–MCl₂ systems under study. No electrophilic substitution Fe³⁺ Mn²⁺ was found to occur in any noticeable degree during the contact of Fe₄[Fe(CN)₆]₃ with aqueous MnCl₂ solutions even when this contact occurred for 1 h and longer.     

Use of 2-(tert-butoxy)-N-(3-carbamothioylphenyl)acetamide and graphene oxide for separation and preconcentration of Fe(Ⅲ),Ni(Ⅱ),Cu(Ⅱ) and Zn(Ⅱ) ions in different samples

A simple and selective method using a column packed with graphene oxide(GO) as a solid phase extractant has been developed for the multi-element preconcentration of Fe(Ⅲ),Ni(Ⅱ),Cu(Ⅱ) and Zn(Ⅱ)ions prior to flame atomic absorption spectrometric determinations.The method is based on the sorption of mentioned ions on synthesized GO using 2-(tert-butoxy)-N-(3-carbamothioylphenyl)acetamide as a chelating agent.Several parameters on the extraction and complex formation were optimized.Under the optimized conditions(pH 6,flow rate 9 mL/min),metal ions were retained on the column,then quantitatively eluted by HNO3solution(5 mL,3.0 mol/L).The preconcentration factor was calculated as250.The detection limits for the analyte ions of interest were found in the range of 0.11 ng/mL(Ni2+) to0.63 ng/mL(Cu2+).The column packed with GO was adequate for metal ions separation in matrixes containing alkali,alkaline earth,transition and heavy metal ions.     

Five-coordinate Fe(III)NO and Fe(II)CO porphyrinates: where are the electrons and why does it matter?

Recent years have seen dramatic growth in our understanding of the biological roles of nitric oxide (NO). Yet, the fundamental underpinnings of its reactivities with transition metal centers in proteins and enzymes, the stabilities of their structures, and the relationships between structure and reactivity remains, to a significant extent, elusive. This is especially true for the so-called ferric heme nitrosyls ([FeNO](6) in the Enemark-Feltham scheme). The Fe-CO and C-O bond strengths in the isoelectronic ferrous carbonyl complexes are widely recognized to be inversely correlated and sensitive to structural, environmental, and electronic factors. On the other hand, the Fe-NO and N-O bonds in [FeNO](6) heme complexes exhibit seemingly inconsistent behavior in response to varying structure and environment. This report contains resonance Raman and density functional theory results that suggest a new model for FeNO bonding in five-coordinate [FeNO](6) complexes. On the basis of resonance Raman and FTIR data, a direct correlation between the nu(Fe)(-)(NO) and nu(N)(-)(O) frequencies of [Fe(OEP)NO](ClO(4)) and [Fe(OEP)NO](ClO(4)).CHCl(3) (two crystal forms of the same complex) has been established. Density functional theory calculations show that the relationship between Fe-NO and N-O bond strengths is responsive to FeNO electron density in three molecular orbitals. The highest energy orbital of the three is sigma-antibonding with respect to the entire FeNO unit. The other two comprise a lower-energy, degenerate, or nearly degenerate pair that is pi-bonding with respect to Fe-NO and pi-antibonding with respect to N-O. The relative sensitivities of the electron density distributions in these orbitals are shown to be consistent with all published indicators of Fe-N-O bond strengths and angles, including the examples reported here.     

Acetylene as a ligand on clusters: An accurate determination of the crystal and molecular structure of (Cp)2Ni2Fe(CO)3(μ3−C2H2) and of (CP)2Ni2Fe2(CO)6(μ4−C2H2)

Abstarct The Cp)₂Ni₂Fe(CO)₃(µ₃-C₂H₂) and Cp)₂Ni₂Fe(CO)₃(µ₃-C₂H₂) (B) complexes have been synthesized and spectroscopically characterized. An accurate X-ray study and a comparison with related structures shows that the substituents of the alkyne ligands exert considerable effects on the bonding parameters.Crystal data for complex A, monoclinic space group P2₁/n,a = 8.418(1),b = 15.779(2),c = 14,493(1) Å, = 91.64(1)°,Z = 4, 2753 observed reflections,R = 0.022; crystal data for complex B, monoclinic space group C2/c,a = 16.2189(7),b = 7.445(3),c = 25.745(5) Å, = 103.74(3),Z=8, 1853 observed reflections,R = 0.051.     

Synthesis and Magnetic Properties of Fe(II) and Nd(III) Complexes of Poly(N-2-thiazolylacrylamide)

In recent years,the organic ferromagnets have drawn growing attention due to their characteristics of structural diversities,low density,and readily processing1-3.Design and synthesis of magnetic polymers are one of great challenges in today′s magnetic material research,and some significant achievements have been made in this field4,5.In this article,we describe the synthesis of acrylamide-type polymer with pendent thiazolyl groups(Scheme1).The as-prepared polymer exhibited better solubility …     

Electrochemical and microgravimetric characterization of magnetron-sputtered Fe–Cr–Ni–Ta and Fe–Cr–Ni alloy films in neutral and strongly acidic media

The Fe–Cr–Ni and Fe–Cr–Ni–Ta alloy films were deposited on quartz substrates by magnetron-sputtering using targets of AISI 316 stainless steel and in combination with pure tantalum. The conventional melting of the Fe–Cr–Ni–Ta alloy formed is virtually impossible because the melting point of tantalum is higher than the boiling points of the other components. Elemental content of the films was determined by XPS analysis. Corrosion behaviour of both alloy films was studied in 5% NaCl and 10 M HCl by electrochemical quartz crystal microgravimetry (EQCM), electrochemical impedance spectroscopy (EIS) and dc-voltammetry. The corrosion resistance of Fe–Cr–Ni–Ta appeared to be significantly higher than that of Fe–Cr–Ni in both neutral (5% NaCl) and strongly acidic (10 M HCl) media. The Fe–Cr–Ni–Ta specimen exhibited an extremely high corrosion resistance in 10 M HCl, where the corrosion rates were about one order of magnitude lower than those of Fe–Cr–Ni in neutral solution. EQCM measurements in NaCl solution indicated accumulation of corrosion products on the Fe–Cr–Ni–Ta surface, which was evident from a distinctive increase in electrode mass. By contrast, the mass of the tantalum-free alloy film decreased with a constant rate, which indicated alloy dissolution to prevail. The corrosion current calculated from the mass decrease was in good agreement with that derived from voltammetric measurements. The EQCM data showed that the corrosion resistance of the Fe–Cr–Ni–Ta alloy film in 10 M HCl was about two orders of magnitude higher than that of the Fe–Cr–Ni.     

Structure and properties of Ni(110) surface coadsorbing chlorine and oxygen

The coadsorption of chlorine with oxygen on Ni(110) surface has been investigated by XPS, UPS, AES and work function measurements. The chlorine preadsorption drastically inhibits the further uptake of oxygen. On the contrary, precovered oxygen has hardly any influence on the additional adsorption of chlorine due to the incorporation of precovered oxygen into the subsurface driven by the chlorine coadsorption. ARXPS measurements provide the evidence for this coadsorption model. The thermal desorption of chlorine and oxygen from the coadsorption surface is very similar to that of both individual adsorbates under the same heating conditions, but the desorption temperature of both the adsorbates apparently decreases on the coadsorption surface. The coadsorption and thermodesorption mechanisms are also discussed in detail.     

基于长链离子液体模板合成Fe(Co、Ni)-MCM-48

以两亲长链离子液体(氯化-1-十六烷基-3-甲基咪唑)为模板剂,采用水热合成方法,分别合成了含铁、钴和镍的立方介孔分子筛MCM-48。通过XRD、TEM、ICP-AES、FTIR、UV-Vis和N₂吸附/脱附实验对其结构和形态进行了表征,并考察了钴掺杂量和模板剂用量对合成立方相结构的影响。结果表明,用该方法合成的试样具有较高的比表面积和规则的立方介孔孔道结构等特征;相对于铁和镍的掺杂试样,钴物种能以四面体的结构稳定地存在于立方介孔分子筛骨架中。     

cis-Dithiolatonickel as metalloligand to dinitrosyl iron units: the di-metallic structure of Ni(μ-SR)[Fe(NO)2] and an unexpected, abbreviated metalloadamantyl cluster, Ni2(μ-SR)4[Fe(NO)2]3

The reaction of Fe(CO)(2)(NO)(2) and Ni(N(2)S(2)) (N(2)S(2) = N,N'-Bis(2-mercaptoethyl)-1,4-diazacycloheptane) by a single CO replacement yields [Ni(N(2)S(2))]Fe(NO)(2)(CO), while an excess of Fe(CO)(2)(NO)(2) leads to triply bridging thiolate sulphurs in a cluster of core composition Ni(2)S(4)Fe(3), lacking one Fe(NO)(2) unit to complete the adamantane-like structure. This structural type was earlier identified in a Cu(I)Cl aggregate of M(II)(N(2)S(2)) (M(II) = Ni, Cu), in which complete M(II)(2)S(4)Cu(I)(4) core structures were obtained as the major, and, in the case of Cu(II)(N(2)S(2)), the incomplete Cu(II)(2)S(4)Cu(I)(3) as a minor, product. The full Ni(2)S(4)Fe(4) cluster has not yet been realized for Fe = Fe(NO)(2). Computational analysis of the NiFe-heterobimetallic complex addresses structural issues including a ∠Ni-S-Fe of 90° in the bimetallic complex.     

Mössbauer spectroscopic studies of molecule-based magnets: NBu4[Fe(II) x Mn(II)1-x Cr(III)(ox)3] and NBu4[Fe(II) x Ni(II)1-x Fe(III)(ox)3]

The internal magnetic field (H _n ) at⁵⁷Fe nucleus was investigated for the mixed crystals, NBu₄[Fe(II) _x Mn(II)_1-x Cr(III) (ox)₃] (x=0.03?1) and NBu₄[Fe(II) _x Ni(II)_1-x Fe(III)(ox)₃]) (x=0?1) using Mössbauer spectroscopy, where NBu₄/⁺=tetra(n-butyl)ammonium ion and ox^2?=oxalate ion. With the decrease ofx, the direction ofH _n at Fe(II) in NBu₄[Fe(II) _x Mn(II)_1-x Cr(III)(ox)₃] changed gradually from parallel to perpendicular, to the honeycomb layers consisting of an alternate array of the bivalent and tervalent ions through ox^2? ligands. A variation of ca. 50° in direction was observed for theH _n at Fe(III) in NBu₄[Fe(II) _x Ni(II)_1-x Fe(III)(ox)₃].