Synthesis of 1-aminocyclopropane-1-carboxylic acid

A three-stage method of synthesizing the natural plant growth regulator 1-aminocyclopropane-l-carboxylic acid by the interaction of cyanoacetic ester with 1,2-dibromoethane has been studied.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Republic of Uzbekistan, Tashkent, fax (3712) 89 14 75. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 855—857, November-December, 1995. Original article submitted November 28, 1994.     

Ethylene biosynthesis by 1-aminocyclopropane-1-carboxylic acid oxidase: a DFT study

The reaction catalyzed by the plant enzyme 1-aminocyclopropane-1-carboxylic acid oxidase (ACCO) was investigated by using hybrid density functional theory. ACCO belongs to the non-heme iron(II) enzyme superfamily and carries out the bicarbonate-dependent two-electron oxidation of its substrate ACC (1-aminocyclopropane-1-carboxylic acid) concomitant with the reduction of dioxygen and oxidation of a reducing agent probably ascorbate. The reaction gives ethylene, CO(2), cyanide and two water molecules. A model including the mononuclear iron complex with ACC in the first coordination sphere was used to study the details of O-O bond cleavage and cyclopropane ring opening. Calculations imply that this unusual and complex reaction is triggered by a hydrogen atom abstraction step generating a radical on the amino nitrogen of ACC. Subsequently, cyclopropane ring opening followed by O-O bond heterolysis leads to a very reactive iron(IV)-oxo intermediate, which decomposes to ethylene and cyanoformate with very low energy barriers. The reaction is assisted by bicarbonate located in the second coordination sphere of the metal.     

In vitro germination of Striga hermonthica and Striga aspera seeds by 1-aminocyclopropane-1-carboxylic acid

Treatment of conditioned seeds of four isolates of Striga hermonthica and one isolate of Striga aspera with various concentrations of the ethylene precursor, 1-aminocyclopropane-1-carboxylic acid (ACC), caused complex stimulation of germination patterns. GR 24, the strigol analogue served as a positive control and its stimulatory activity was comparable to that of ACC. When conditioned Striga seeds were treated with negative control that did not contain ACC, the stimulatory effect was lost. Overall, the germination data suggested a hormonal mode of action by ACC, which involves indirect stimulation of biosynthesis of ethylene that then triggers seed germination. The various mechanisms that have been proposed for the chemical and biological oxidation of ACC to generate ethylene are discussed.     

The resolution of racemic 2-alkyl-1-aminocyclopropane-1-carboxylic acids

Practical procedures for the resolution of racemic modification of (1$\text{R}$, 2$\text{S}$)-and (1$\text{S}$, 2$\text{R}$)-1-amino-2-ethylcyclopropane-1-carboxylic acid $\text{1a}$,$\text{b}$,(1$\text{R}$, 2$\text{S}$)- and (1$\text{S}$, 2$\text{R}$)-1-amino-2-methylcyclopropane-1-carboxylic acid $\text{2a}$,$\text{b}$, and (1$\text{R}$, 2$\text{R}$)- and (1$\text{S}$, 2$\text{S}$)-1-amino-2-methylcyclopropane-1-carboxylic acid $\text{3a}$,$\text{b}$ are described; the structures as $\text{1a}$,$\text{2a}$, and $\text{3a}$ were confirmed by X-ray-crystallographic methods.     

Determination of 1-aminocyclopropane-1-carboxylic acid in apple extracts by capillary electrophoresis with laser-induced fluorescence detection

A rapid and sensitive method for the determination of 1-aminocyclopropane-1-carboxylic acid (ACC) in apple tissues has been described. This method is based on the derivatization of ACC with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ), and separation and quantification of the resulting FQ-ACC derivative by capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF). Our results indicated that ACC derivatized with FQ could be well separated from other interfering amino acids using 20 mM borate buffer (pH 9.35) containing 40 mM sodium dodecyl sulfate and 10 mM Brij 35. The linearity of ACC was determined in the range from 0.05 to 5 microM with a correlation of 0.9967. The concentration detection limit for ACC was 10 nM (signal-to-noise = 3). The sensitivity and selectivity of this described method allows the analysis of ACC in crude apple extracts without extra purification and enrichment procedure.     

Synthesis of labeled 1-amino-2-methylenecyclopropane-1-carboxylic acid, an inactivator of 1-aminocyclopropane-1-carboxylate deaminase

1-Amino-2-methylenecyclopropane-1-carboxylic acid (2-methylene-ACC) is an irreversible inhibitor for a bacterial enzyme, 1-aminocyclopropane-1-carboxylate (ACC) deaminase, which catalyzes the conversion of ACC to alpha-ketobutyrate and ammonia. The inactivation has been proposed to proceed with the ring scission induced by an addition of an enzyme nucleophile, resulting in the formation of a reactive turnover product that then traps an active-site residue. To gain further insight into this unique enzymatic reaction, the tritiated 2-methylene-ACC was prepared and incubated with ACC deaminase to locate and identify the entrapped amino acid residue. The synthesis of this radiolabeled compound and the results of its incubation with ACC deaminase are reported in this paper.     

Asymmetric synthesis of substituted 1-aminocyclopropane-1-carboxylic acids via diketopiperazine methodology

Diketopiperazinespirocyclopropane 12 is prepared in > 98% d.e. via the conjugate addition of a phosphorus ylide to (6S)-N,N'-bis(p-methoxybenzyl)-3-methylenepiperazine-2,5-dione 2. Deprotection and hydrolysis of adduct 12 and subsequent peptide coupling demonstrate the applicability of this methodology to the asymmetric synthesis of 1-aminocyclopropane-1-carboxylic acids for incorporation into novel peptides. A model for the high level of diastereofacial selectivity observed in the cyclopropanation reaction is presented. A highly selective asymmetric approach (> 98% d.e.) to (S)-[2,2-(2)H2]-1-aminocyclopropane-1-carboxylic acid 29 is also reported via a deuterated sulfur ylide addition to acceptor 2.     

Molecular structures and ab initio molecular orbital calculations of the optically active derivatives of 1-aminocyclopropane-1-carboxylic acid

The novel optically active derivatives of 2,2′-disubstituted-1-aminocyclopropane-1-carboxylic acid (−)-2 and (+)-3 were synthesised from the spiro-azlactone (+)-1. Oxidation of the diol moiety of (+)-3 gave by ring enlargement the racemic mixture of 2,3-dihydrofuran derivative (±)-6. This conversion is explained by stepwise rearrangement of the initially formed tetrasubstituted cyclopropanecarbaldehyde 4 through zwitterionic's reactive intermediate 5. The formation of (±)-6 is preferred energetically as established by ab initio calculations of the ground states and possible intermediates for that rearrangement. The crystal structure and absolute configuration of the compounds (+)-1, (−)-2, (+)-3 and (−)-7 were determined by single-crystal X-ray diffraction method. All four compounds possess Z-configuration of the cyclopropane ring. The dioxolane ring in the structures (+)-1 and (−)-2 adopts half-chair conformation, while the cyclopropane ring and geminally substituted groups in the structures (−)-2, (+)-3 and (−)-7 possess the anticlinal conformation. The molecules of the compound (+)-1 are connected by very weak intermolecular hydrogen bond of C-H?O type. In the compounds (−)-2, (+)-3 and (−)-7inter- and intramolecular hydrogen bonds of N-H?O type were observed. The spiro-compound (+)-1 exhibited a more pronounced inhibitory activity against the proliferation of murine leukemia and human T-lymphocytes cells than other type of tumor cell lines and normal human fibroblast cells.     

Determination of 1-aminocyclopropane-1-carboxylic acid and its structural analogue by liquid chromatography and ion spray tandem mass spectrometry

Liquid chromatography coupled to ion spray tandem mass spectrometry was developed as a method for the simultaneous analysis of the amino acid 1-aminocyclopropane-1-carboxylic acid (ACC) and its structural analogue, cyclopropane-1,1-dicarboxylic acid (CDA). ACC and CDA fragmentation as well as optimization of MS parameters were investigated in positive ion mode. In selective reaction monitoring mode the protonated molecule [M+H]+ was selected as parent ion for both ACC and CDA, while the immonium ion from ACC and the [M+H-H2O]+ ion from CDA were selected, respectively, as product ions. In spite of the high selectivity of MS/MS among the 20 protein amino acids potentially present with ACC and CDA in the plant material analyzed, Glu and Thr can interfere with the signal of ACC. As a result, their chromatographic separation is necessary. This was achieved in less than 4 min by ion-pair reversed-phase chromatography with nonafluoropentanoic acid as ion-pair reagent. A linear response within a concentration range of 1-5 mg l(-1) was observed for this LC method and the detection limit was found to be 20 pmol for ACC and 150 pmol for CDA (using a 20-microl loop). This methodology was successfully applied to the detection of ACC in apple tissue.     

Extraction and quantitative analysis of 1-aminocyclopropane-1-carboxylic acid in plant tissue by gas chromatography coupled to mass spectrometry

We developed a new method for the determination of the ethylene precursor 1-aminocyclopropane-1-carboxylic acid (ACC) using quantitative GC-negative chemical ionisation MS as a detection and quantification system, in combination with isotope dilution using [2H4]ACC and an off-line solid-phase extraction. By derivatisation with pentafluorobenzyl bromide, ACC could easily be detected with m/z 280 being the most abundant ion. Determination of this component resulted in a detection limit of 10 fmol and a linear fit in the 100 fmol-100 pmol range. The combination of a rapid, high yield purification method with a stable derivatisation procedure and a sensitive detection method allowed the detection of ACC in samples as low as 100 mg fresh mass.     

PAPQMD parametrization of molecular systems with cyclopropyl rings: Conformational study of homopeptides constituted by 1-aminocyclopropane-1-carboxylic acid

The suitability of ab initio, semiempirical and density functional methods as sources of stretching and bending parameters has been explored using the PAPQMD (Program for Approximate Parametrization from Quantum Mechanical Data) strategy. Results show that semiempirical methods provide parameters comparable to those compiled on empirical force fields. In this respect the AM1 method seems to be a good method to obtain parameters at a minimum computational cost. On the other hand, harmonic force fields initially developed for proteins and DNA have been extended to include compounds containing highly strained three-membered rings, like 1-aminocyclopropane-1-carboxylic acid. For this purpose the cyclopropyl ring has been explicitly parametrized at the AM1 level considering different chemical environments. Finally, the new set of parameters has been used to investigate the conformational preferences of homopeptides constituted by 1-aminocyclopropane-1-carboxylic acid. Results indicate that such compounds tend to adopt a helical conformation stabilized by intramolecular hydrogen bonds between residues i and i+3. This conformation allows the arrangement of the cyclic side chains without steric clashes.     

A convenient synthesis of regio-specifically 2-alkylated-3-deuteriated-1-aminocyclopropane-1-carboxylic acids

A simple procedure for the large scale preparations of regio-specifically 2-alkylated-3-deuteriated-1-aminocyclopropane-1-carboxylic acids from 1 -deuterio-1,2-dibromoalkanes is described.     

Crystal structure and photoluminescence of 7-(N,N'-diethylamino)-coumarin-3-carboxylic acid

The structure of 7-(N,N'-diethylamino)-coumarin-3-carboxylic acid (DCCA) was verified by single crystal X-ray crystallography. The UV-vis absorption and fluorescence of DCCA were discussed. The compound exhibits strong blue emission under ultraviolet light excitation. The molecular structure of DCCA was optimized using density function theory (DFT) at B3LYP/6-31G level, showing that the optimized geometers parameters are in good agreement with experiment data. In addition, the HOMO and LUMO levels of DCCA were deduced.     

Crystal and molecular structure of 3-trichloromethyl-4-chloro-5-isopropoxyisothiazole and 4,5-dichloroisothiazole-3-carboxylic acid

X-ray structural data are used to demonstrate that the chlorine in the 5-position of the heterocycle is replaced on reaction of 3-trichloromethyl-4,5-dichloroisothiazole with sodium isopropoxide. The S-N and C-S bond lengths are lengthened in the resulting 3-trichloromethyl-4-chloro-5-isopropoxyisothiazole whereas the C-N and C-C bonds are shortened compared with analogous bonds in 4,5-dichloroisothiazole-3-carboxylic acid. This is explained by conjugation of the carboxylic acid with the heterocycle.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 399–402, March, 1992.     

Crystal structure of a non-stoichiometric channel inclusion complex of 1-benzyl-6-phenylpiperidin-2-one-5-carboxylic acid with acetonitrile

C₁₉H₁₉NO₃·x CH₃CN (x=0.3),M _r=643.35, hexagonal, space groupP6₁ (No. 169),a=23.027(5),c=5.775(1) Å,V=2652(1) ų,Z=6. The structure was solved by direct methods and refined toR=0.077 for 1562 observed MoK reflections. The title heterocyclic carboxylic acid was established as thetrans isomer, with the phenyl and carboxyl substituents occupying pseudo-equatorial and equatorial positions, respectively, of the piperidin-2-one ring in a half-chair conformation. Acid host molecules related by the 6₁ screw operation are linked by intermolecular O–H...O (cyclic amide) hydrogen bonds to generate an open channel bounded by coaxial intertwined helices each having a pitch of 5c. Within each channel of free diameterca. 6.0 Å the acetonitrile molecules partially occupy highly disordered sites which do not lie on thec axis. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82067 (13 pages).     

Spectroscopic studies of 1-aminocyclopropane-1-carboxylic acid oxidase: molecular mechanism and CO(2) activation in the biosynthesis of ethylene

1-Aminocyclopropane-1-carboxylic acid (ACC) oxidase (ACCO) catalyzes the last step in the biosynthesis of the gaseous plant hormone ethylene, which is involved in development, including germination, fruit ripening, and senescence. ACCO is a mononuclear non-heme ferrous enzyme that couples the oxidation of the cosubstrate ascorbate to the oxidation of substrate ACC by dioxygen. In addition to substrate and cosubstrate, ACCO requires the activator CO(2) for continuous turnover. NIR circular dichroism and magnetic circular dichroism spectroscopies have been used to probe the geometric and electronic structure of the ferrous active site in ACCO to obtain molecular-level insight into its catalytic mechanism. Resting ACCO/Fe(II) is coordinatively saturated (six-coordinate). In the presence of CO(2), one ferrous ligand is displaced to yield a five-coordinate site only when both the substrate ACC and cosubstrate ascorbate are bound to the enzyme. The open coordination position allows rapid O(2) activation for the oxidation of both substrates. In the absence of CO(2), ACC binding alone converts the site to five-coordinate, which would react with O(2) in the absence of ascorbate and quickly deactivate the enzyme. These studies show that ACCO employs a general strategy similar to other non-heme iron enzymes in terms of opening iron coordination sites at the appropriate time in the reaction cycle and define the role of CO(2) as stabilizing the six-coordinate ACCO/Fe(II)/ACC complex, thus preventing the uncoupled reaction that inactivates the enzyme.     

Crystal structure of 2-selenobenzyl-1-benzoic acid.

C14H12O2Se is monoclinic, P2(1)/c. Unit-cell dimensions at 293 K are a = 8.1055(7), b = 5.8403(11), c = 26.0302(17)A, beta = 94.560(5) degrees, V = 1228.3(3)A3, Dx = 1.575 g/cm3, and Z = 4. The R value is 0.048 for 2144 observed reflections. The dihedral angle between the phenyl rings is 74.9(2)degrees. There is an intermolecular hydrogen bond between two symmetry related carboxyl groups with an O1-O2 distance of 2.668(6)A. The molecules in the crystal are packed at normal van der Waals distances.     

Transformations of pyrrolanthrone-1-carboxylic acid

The preparative possibilities of syntheses based on pyrrolanthrone-1-carboxylic acid were studied. Methylation of the acid or its ester leads to N-methylpyrrolanthrone-1-carboxylic acid esters. The esters were converted to amides and hydrazides, and the latter were converted to 1-amino derivatives through the azides. The indicated transformations and decarboxylation in phosphoric acid give the products in high yields.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 785–788, June, 1978.     

Crystal and molecular structure of pyridazine-3-carboxylic acid hydrochloride and zinc(II) pyridazine-3-carboxylate tetrahydrate

Crystals of pyridazine-3-carboxylic acid hydrochloride contain almost planar molecular sheets in which the cations, composed of acid molecules each with a hydrogen atom attached to one of the ring-nitrogen atoms, interact with chloride anions via a network of weak hydrogen bonds. Van der Waals interactions between sheets are indicated by the intersheet spacing of 3.47?Å. The crystal structure of di(aqua-O)bis(trans-pyridazine-3-carboxylato-N,O)zinc(II) dihydrate is composed of monomeric molecules in which the zinc(II) ion at the center of symmetry is coordinated by two ligand molecules each via its N,O bonding moiety. The ligand molecules and the metal ion form a trans-planar configuration. Two water oxygen atoms, above and below the plane, complete a distorted octahedron. A network of weak hydrogen bonds holds the monomers together.