Self-organization effect in poly（3-hexylthiophene）： methanofullerenes solar cells

This paper studies the self-organization of the polymer in solar cells based on poly（3-hexylthiophene）： [6, 6]-phenyl C61-butyric acid methyl ester by controlling the growth rate of active layer. These blend films are characterized by UV-vis absorption spectroscopy, charge-transport dark J - V curve, x-ray diffraction pattern curve, and atomic force microscopy. The results indicate that slowing down the drying process of the wet films leads to an enhanced selforganization, which causes an increased hole transport. Increased incident light absorption, higher carrier mobility, and balanced carrier transport in the active layer explain the enhancement in the device performance, the power conversion efficiency of 3.43% and fill factor up to 64.6% are achieved under Air Mass 1.5, 100 mW/cm^2.     

P3HT/PMMA双层聚合物电双稳器件的研究

通过逐层旋涂的方法,制备了P3HT(poly(3-hexylthiophene))与PMMA(poly(methylmethacrylate))双层器件,并与二者的共混溶液制备的器件进行了性能对比。利用扫描电镜(SEM)表征了双层器件的横截面形貌;利用电流-电压(I-V)以及电流-读取次数(I-t)测试,测量了两种器件的开关比以及持续时间特性。其中,双层器件具有更好的开关比,可达1×10~3,同时反复读写测试表明器件性能非常稳定。为了解释电双稳现象产生的机理,对双层结构器件的电流-电压曲线进行了线性拟合,利用器件的能级图进行分析,得出了电荷在器件中的传输过程。研究结果表明,可以通过电荷俘获释放理论解释P3HT/PMMA双层器件电双稳特性产生的机理。     

PVA栅绝缘层浓度对P3HT有机场效应晶体管性能的影响

采用溶液制备法制备了用PVA作为绝缘层、P3HT作为有源层的有机场效应晶体管,,研究了不同浓度PVA栅绝缘层对器件性能的影响。实验结果显示,以质量分数为8%的PVA溶液制备的栅绝缘层具有最好的性能,器件的场效应迁移率为0.31 cm²·V^-1·s^-1,阈值电压为-6 V。进一步分析了PVA栅绝缘层浓度对器件性能提高的原因,结果表明,对于制备溶液化的有机场效应晶体管,选取合适的PVA栅绝缘层浓度非常重要。     

NiO_x作为空穴传输层对有机太阳能电池光吸收的影响

基于多层膜系模型的传输矩阵方法、麦克斯韦方程和光子吸收方程,研究了NiOx作为替代3,4-乙撑二氧噻吩:聚苯乙烯磺酸盐(PEDOT:PSS)的空穴传输材料对聚3-己噻吩(P3HT)和富勒烯衍生物([6,6]-phenyl-C61-butyric acid methyl ester,PC61BM)共混体异质结有机太阳能电池器件内部光电场分布和光吸收特性的影响.分别制备了以NiOx和PEDOT:PSS为空穴传输层,P3HT:PCBM为活性层的有机太阳能电池,并通过数值模拟的方法比较了NiOx和PEDOT:PSS两种空穴传输材料对器件光伏特性的影响.结果表明:10 nm的NiOx空穴传输层器件比40 nm的PEDOT:PSS器件获得了更大的短路电流和填充因子,并具有更高的能量转化效率.     

Stable organic solar cells employing MoO3-doped copper phthalocyanine as buffer layer

A stable organic solar cell with structure of ITO/buffer/donor/acceptor/cathode is presented. A thin layer (5 nm) of MoO₃-doped CuPc is adopted as the buffer in CuPc/C₆₀ organic heterojunction photovoltaic (PV) solar cells, resulting in two times longer lifetime. The surface morphology of buffer layer plays a decisive role in improving the stability.     

Influence of fullerene derivative replacement with TiO2 nanoparticles in organic bulk heterojunction solar cells

In an effort to develop hybrid organic solar cells with improved power conversion efficiency (PCE), devices based on poly (3-hexylthiophene) (P3HT):phenyl C₆₁-butyric acid methyl ester (PCBM) active layer and poly (3,4-ethylenedioxythiophene) (PEDOT):poly (styrenesulfonate) (PSS) buffer layers were prepared. A systematic replacement of PCBM was achieved by introducing nanostructured TiO₂ (∼15 nm particle size), dissolved separately in chlorobenzene (CB) and 1,2 –dichlorobenzene (DCB), to the (P3HT:PCBM) active layer while keeping a fixed amount for P3HT. To understand the effect of fullerene replacement with the inorganic metal oxide nanoparticles on different properties of resulting devices, a variety of techniques such as Current–Voltage (J–V) characteristics, Field Emission Scanning Electron Microscopy (FESEM), Atomic Force Microscopy (AFM), Ultravoilet-Visible (UV–Vis) Spectrophotometry and External Quantum Efficiency (EQE) were employed. The addition of TiO₂ nanoparticles in the active layer improved the power conversion efficiency (PCE) of P3HT:PCBM devices. The addition of TiO₂ nanoparticles using CB as solvent enhanced the absorption in visible region and also introduced a red shift in the absorption spectra. A significant increase in EQE was observed for devices with TiO₂ nanoparticles in the active layer. Mixing TiO₂ also increased the surface roughness of the active layer where TiO₂ nanoparticles were found to agglomerate as their concentration increased relative to fullerene derivative. A complete agglomeration of TiO₂ was observed in the absence of PCBM.     

CH3NH3PbI3/poly‐3‐hexylthiophen perovskite mesoscopic solar cells: Performance enhancement by Li‐assisted hole conduction

To address if the non‐triphenylamine derivative hole transporting materials such as P3HT (poly‐3‐hexylthiophene) could also exhibit high device efficiency in mesoscopic MAPbI₃ perovskite solar cells, we examined the effect of Li‐TFSI (Li‐bis(trifluoromethanesulfonyl) imide) and t‐BP (4‐tert‐butylpyridine) additives added in P3HT on device performance. Unlike the triphenylamine HTMs, the P3HT thiophene HTM without amine moiety was not doped by the additives but its conductivity was significantly improved by the Li‐TFSI/t‐BP mediated additional hole conduction. By inclusion of Li‐TFSI/t‐BP additive, we could fabricate more efficient mesoscopic MAPbI₃ perovskite solar cells with smaller hysteresis with respect to scan direction due to Li mediated additional hole conduction. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Effects of optical interference and annealing on the performance of poly （3-hexylthiophene）： fullerene based solar cells

<正>In this paper,the effects of optical interference and annealing on the performance of P3HT:PCBM based organic solar cells are studied in detail.Due to the optical interference effect,short circuit current density(J_SC) shows obvious oscillatory behaviour with the variation of active layer thickness.With the help of the simulated results,the devices are optimized around the first two optical interference peaks.It is found that the optimized thicknesses are 80 and 208 nm.The study on the effect of annealing on the performance indicates that post-annealing is more favourable than pre-annealing.Based on post-annealing,different annealing temperatures are tested.The optimized annealing condition is 160℃for 10 min in a nitrogen atmosphere.The device shows that the open circuit voltage V-（OC） achieves about 0.65V and the power conversion efficiency is as high as 4.0%around the second interference peak.     

Investigating the performance of P3HT:PCBM organic solar cells involving gamma-irradiated PEDOT:PSS layer

In this work, we investigated for the first time the characteristics of (poly (3-hexylthiopene) and [6, 6]-phenyl C61-butyric acid methyl ester) (P3HT:PCBM) blends-based organic solar cell with 1.25?mg/mL boric-acid (H₃BO₃)-doped poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) layer which is irradiated under the 40 Gray (Gy) dose of gamma (γ) ray. Experimental results showed that the parameters of solar cell improved with exposure to low-dose gamma radiation. In particular, it has provided a significant improvement in short-circuit current density (J_sc) and power conversion efficiency (PCE). About 49% increase in PCE to 1.22% and 40% increase in J_sc to 6.28?mA/cm² was obtained between the bare device and the device containing irradiated PEDOT:PSS:H₃BO₃. Also, it was determined that the H₃BO₃-doped PEDOT:PSS is more stable to temperature. More importantly, solar cell containing gamma-irradiated PEDOT:PSS:H₃BO₃ showed best performance comparing to conventional PEDOT:PSS-based cell.     

Fe3O4纳米粒子对P3HT:PCBM电池的影响

为了提高太阳能电池的性能,研究磁性纳米粒子在外加磁场的作用下对聚合物太阳能电池有源层P3HT:PCBM成膜及太阳能电池性能的影响。本文采用热分解法制备了磁性Fe₃O₄纳米粒子,将不同质量分数的Fe₃O₄纳米粒子掺入到P3HT:PCBM溶液中,旋涂后在外加磁场的作用下自组成膜。通过TEM、XRD对制备的Fe₃O₄纳米粒子进行表征,并利用偏光显微镜、原子力显微镜对成膜质量进行探究。结果表明,采用热分解法制备的Fe₃O₄纳米粒子直径在10 nm左右,在外加磁场作用下,Fe₃O₄纳米粒子对成膜有一定的调控作用。当Fe₃O₄纳米粒子掺杂质量分数为1%时,太阳能电池器件的开路电压增加3.77%,短路电流增加24.93%,光电转换效率提高7.82%。     

Highly stable inverted poly (3-hexylthiophene):methano-fullerene [6,6]-phenyl C71-butyric acid methyl ester bulk heterojunction solar cell with thin oxide nano particle layer using solution process

We have investigated the inverted poly (3-hexylthiophene):methano-fullerene [6,6]-phenyl C71-butyric acid methyl ester (P3HT:PC₇₁BM) bulk heterojunction (IBHJ) solar cell with various n-type metal oxide nano particle layers on ITO and MoO₃ anode buffer layer underneath Al. The IBHJ solar cell with a tin oxide nano particle layer shows the power conversion efficiency (PCE) of 3.1% and better stability compared to conventional BHJ solar cell. The PCE of this cell decreases by 3% after 2 months in ambient air while the other cells show more degradation.     

采用高传导率银铜镍网格电极的柔性聚合物太阳能电池

采用一种新的阳极材料:银、铜、镍的复合金属网格阳极,利用旋涂法制成了活性层为P3HT (poly(3-hexylthiophene)):PCBM([6,6]-phenylC61-butyricacidmethylester)的柔性衬底聚合物太阳能电池.制备了5种不同结构的柔性聚合物太阳能电池器件,将采用新型阳极材料的柔性衬底聚合物太阳能电池与传统ITO(Indium tin oxide)阳极的柔性衬底聚合物太阳能电池进行对比,发现新型阳极材料所制成的器件性能得到大幅度的提高,其电池器件在50 mW/cm~2强度光照下,开路电压(V_(oc))为0.54 V,短路电流密度(J_(sc))为5.39 mA/cm~2,能量转换效率为2.060%.     

Effects of molecular weight and polydispersity of poly (3-hexylthiophene) in bulk heterojunction polymer solar cells

This paper reports the effect of the molecular weight (MW) and polydispersity (PD) of poly (3-hexylthiophene) (P3HT) in bulk heterojunction polymer solar cells (BHJ-SCs). The P3HT with low MW and broad PD exhibited higher crystallinity compared to that with high MW and narrow PD. Due to the improved crystallinity, the BHJ-SCs based on P3HT with low MW and broad PD showed performance with a power conversion efficiency of 3.8% with short-circuit currents of −9.90 mA/cm².     

Plasmon enhanced light absorption in bulk heterojunction organic solar cells

Silver nanospheres (Ag NSs) buffer layers were introduced via a solution casting process to enhance the light absorption in poly (3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C61 butyric acid methyl ester (PCBM) bulk heterojunction organic solar cells. These Ag NSs, as surface plasmons, could increase the optical electric field in the photoactive layer whilst simultaneously improving the light scattering. As a result, this buffer layer improves the light absorption of P3HT:PCBM blend and consequently improves the external quantum efficiency (EQE) of organic solar cells. In this work, different sizes of Ag NSs plasmon‐enhanced layer were investigated, with the aim of optimizing the performance of devices. UV‐vis spectrometer measurement demonstrates that the total optical absorption of P3HT:PCBM blend films in the spectral range of 350–650 nm is increased by ～4 and 6% with incorporation of the 20 and 40 nm Ag NSs, respectively. The J_sc was shown to increase by ～21 and 24% for 20 and 40 nm Ag NSs, respectively. This is due to the extra photogenerated excitons by the plasmonic resonance of Ag NSs. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Composition-dependent phase separation effects of organic solar cells using P3HT:PCBM as active layer and chromium oxide as hole transporting layer

Phase separation of the poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) active layer (ATL) was investigated by varying their relative ratio in the organic solar cells (OSCs). With the help of the UV/visible spectrophotometer, optical microscopy and scanning electron microscope, we found that the cluster of PCBM at the interface or surface was affected by Al cathode, the composition of the blends and thermal annealing. The disc-like shape crystals of PCBM substituted for the needle-like ones at higher PCBM compositions at the ATL/Al interface, which led to stronger contacts and bigger contact area. It could make short circuit current density increase, but may affect the blend morphology and result in parallel resistance and open circuit voltage decreased with the PCBM ratio increasing from 40 to 60%. The microstructure of the P3HT:PCBM ATL, determined by the composition dependent phase separation, supported the optimized performance of the OSCs with the composition of 40-50% PCBM.     

空间用GaInP/GaAs/In0.3Ga0.7 As(1 eV)倒装三结太阳电池研制

采用阶变缓冲层技术 (step-graded) 外延生长了具有更优带隙组合的倒装GaInP/GaAs/In_0.3Ga_0.7As(1.0 eV) 三结太阳电池材料, TEM和HRXRD测试表明晶格失配度为2%的In_0.3Ga_0.7As 底电池具有较低的穿透位错密度和较高的晶体质量, 达到太阳电池的制备要求. 通过键合、剥离等工艺制备了太阳电池芯片. 面积为 10.922 cm² 的太阳电池芯片在空间光谱条件下转换效率达到32.64% (AM0, 25 ℃), 比传统晶格匹配的 GaInP/GaAs/Ge(0.67 eV) 三结太阳电池的转换效率提高3个百分点. 关键词： 太阳电池 三结 倒装结构     

A physics-based analytical model for bulk heterojunction organic solar cells incorporating monomolecular recombination mechanism

We present an analytical model for bulk heterojunction organic solar cells incorporating the physics of recombination in the transport equations. Monomolecular recombination process is considered to be the dominant mechanism and treated explicitly. The proposed analytical model shows good agreement with the experimental data as well as with the numerical simulations. The improvements over the previous models are also presented to show the importance of considering the recombination process. The model can be used to find device characteristics such as current–voltage characteristic, efficiency etc. of bulk heterojunction organic solar cells avoiding the mathematical complexities of numerical models.     

阴极修饰层对 SubPc/C60 倒置型有机太阳能电池性能的影响

采用Cs₂CO₃, 石墨烯(graphene):Cs₂CO₃混合材料和 ZnO 纳米颗粒作为阴极修饰材料, 研究了不同阴极界面修饰层对基于SubPc/C₆₀的倒置结构的有机太阳能电池性能的影响. 结果表明: 引入适当厚度的阴极修饰层, 可以提高器件的性能和稳定性; 尤其是基于Cs₂CO₃以及graphene:Cs₂CO₃混合阴极修饰层的光伏器件, 能量转换效率(PCE)提高了2倍; 同时, 采用ZnO纳米颗粒作为阴极修饰层的器件, 开路电压(V_OC)达到0.89 V, 并且器件的PCE 提高了4倍多. 此外, 不同电极修饰材料和倒置结构的引入可以有效防止器件串连电阻的升高, 从而提高器件的稳定性. 关键词： 倒置型 阴极修饰层 有机太阳能电池 稳定性     

Luminescence of La3F3[Si3O9]:Ce

The luminescence properties of Ce³⁺ in La₃F₃[Si₃O₉] are reported. Excitation and emission bands corresponding to 4f¹→5d¹ transitions of Ce³⁺ were identified. The center of gravity of the 5d states lies at remarkable high energy (43.2×10³ cm⁻¹) for Ce³⁺ in a silicate compound. This high value is attributed to the combined oxygen/fluoride coordination of the Ce³⁺ ion. Emission from the lowest 4f5d level to the ²F_5/2 and ²F_7/2 levels was found at 32.4×10³ and 30.4×10³ cm⁻¹. These results are compared with literature data on silicates and fluorides. From the values found for Ce³⁺, predictions are made for the positions of the 4f5d bands of Pr³⁺ and Er³⁺ in La₃F₃[Si₃O₉]. For both ions, it is concluded that in this host lattice emission is expected from high lying 4fⁿ energy levels.     

A12o3钝化及其在晶硅太阳电池中的应用

介绍了A1203的材料性质及其原子层沉积制备方法,详细阐述了该材料的钝化机制（化学钝化和场效应钝化）,并从薄膜厚度、热稳定性及叠层钝化等角度阐释其优化方案．概述了Al203钝化在晶体硅太阳电池中的应用,主要包括钝化发射极及背面局部扩散电池和钝化发射极及背表面电池．最后,对A1203钝化工艺的未来研究方向和大规模的工业应用进行了展望．