Temperature-dependent photoluminescence properties of (Y, Lu)3Al5O12:Ce phosphors for white LEDs applications

The effects of the excitation wavelength, Ce³⁺ concentration and chemical substitution on the thermal quenching of Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce³⁺) phosphors were investigated over a temperature range from 30 to 250 °C. The quenching behavior exhibits a complex dependence on the excitation wavelength and Ce³⁺ concentration, which can be attributed to temperature-dependent absorption strength of the different f-d absorption bands and thermally activated concentration quenching with or without energy migrations between Ce³⁺ ions, respectively. With increasing Lu³⁺content the luminescence of (Y, Lu)₃Al₅O₁₂:Ce³⁺ phosphors shows a pronounced blueshift, and simultaneously the temperature quenching is obviously improved due to a decrease in Stokes shift.     

Preparation and luminescence properties of SrTiO3:Pr,Al phosphor from the glycolate method

Spherical SrTiO₃:Pr³⁺,Al³⁺ phosphor with high crystallinity and uniform particle size distribution was formed from the glycolate precursor. The glycolate precursor was obtained by heating the mixed solution of metallic nitrates and titanium oxychloride in ethylene glycol up to 200 °C. The thermal decomposition of the glycolate precursor proceeded through three major stages, i.e., (i) evolution of glycols (∼200 °C), (ii) decomposition of glycolate precursor, and (iii) decomposition of strontium carbonate and crystallization of SrTiO₃:Pr³⁺,Al³⁺ phosphor.SrTiO₃:Pr³⁺,Al³⁺ phosphor exhibited a strong red emission, peaking at about 617 nm. SrTiO₃:Pr³⁺,Al³⁺ phosphor obtained from the glycolate complex has higher luminescent properties than the conventional solid state reaction and the Pechini method in terms of photoluminescence (PL) and cathodoluminescence (CL). High crystallinity, low residual carbon content and small grain size with uniform shape would enhance the luminescence intensity of phosphor by the glycolate method due to high surface area per unit volume and low organic content compared with the Pechini method. Also, Al³⁺ ion is more effective than Ga³⁺ ion to enhance PL intensity of SrTiO₃:Pr³⁺,Al³⁺ phosphor because of smaller Al³⁺ ion radius. Therefore, the glycolate method has been demonstrated to be a convenient and unique process for the production of muticomponent oxide with smaller grain size and higher crystallinity compared with the conventional mixed oxide reaction and the polymer precursor method.     

The structure and luminescence properties of a novel orange emitting phosphor Y3MnxAl5−2xSixO12

A series of phosphors with the composition Y₃Mn_xAl_5−2xSi_xO₁₂ (x=0, 0.05, 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6) was prepared through solid state reactions. X-ray powder diffraction analysis of samples shows that when co-doping content does not exceed 16% of Al³⁺, equimolar co-doping of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance to decrease a certain extent. However, if the co-doping content exceeds 16%, new phases will form in the samples. The excitation and emission spectra of samples show that Mn²⁺ in Y₃Mn_xAl_5−2xSi_xO₁₂ emits broadband orange light (peak wavelength varies from 586 to 593 nm). With an increment in co-doping content, the emission intensity of the phosphors increases when the value of x is lower than 0.1 while it decreases when it is higher than 0.1 and the emission peak moves to a longer wavelength.     

Luminescence properties of cerium-doped di-strontium magnesium di-silicate phosphor by the solid-state reaction method

A series of Sr₂MgSi₂O₇:xCe³⁺ (x?=?1.0%, 2.0%, 3.0%, 4.0% and 5.0%) phosphors were synthesized by the solid-state reaction method. The phosphor with optimum thermoluminescence, photoluminescence and mechanoluminescence (ML) intensity was characterized by X-ray diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy and Fourier transform infrared techniques. The trapping parameters (i.e. activation energy, frequency factor and order of the kinetics) of each synthesized phosphor have been calculated using the peak shape method and the results have been discussed. Under ultraviolet excitation (325?nm), Sr₂MgSi₂O₇:xCe³⁺ phosphors were composed of a broad band peaking at 385?nm, belonging to the broad emission band which emits violet-blue color. Commission International de I’Eclairage coordinates have been calculated for each sample and their overall emission is near violet-blue light. In order to investigate the suitability of the samples for industrial uses, color purity and color rendering index were calculated. An ML intensity of optimum [Sr₂MgSi₂O₇:Ce³⁺ (3.0%)] phosphor increases linearly with increasing impact velocity of the moving piston which suggests that these phosphors can be used as fracto-ML-based devices. The time of the peak ML intensity and the decay rate did not change significantly with respect to increasing impact velocity of the moving piston.     

Photoluminescence characterization of Ce and Dy doped Li2CaGeO4 phosphors

Ce³⁺ and Dy³⁺ activated Li₂CaGeO₄ phosphors were prepared by a solid-state reaction method, and characterized by XRD (X-ray diffraction) and photoluminescence techniques. The characteristic emission bands of Dy³⁺ due to ⁴F_9/2→⁶H_15/2 (blue) and ⁴F_9/2→⁶H_13/2 (yellow) transitions were detected in the emission spectra of Li₂CaGeO₄:Dy³⁺. Ce³⁺ broad band emission was observed in Li₂CaGeO₄:Ce³⁺ phosphors at 372 and 400 nm due to 5d→4f transition when excited at 353 nm. Co-doping of Ce³⁺ enhanced the luminescence of Dy³⁺ significantly and concentration quenching occurs when Dy³⁺ is beyond 0.04 mol%. White-light with different hues can be realized by tuning Dy³⁺ concentration in the phosphors.     

Acetate reduction synthesis of Sr2Si5N8:Eu phosphor and its luminescence properties

A novel synthesis method was developed for the efficient red phosphor, Eu²⁺-activated Sr₂Si₅N₈, by employing the strontium acetate as both the reducing agent and strontium source. The phase purity of final product was strongly dependent on the heating rate of the precursors. Sr₂Si₅N₈:Eu²⁺ (2 at%) phosphor presented a broadband excitation spectrum in the range 300–500 nm, matching well with the blue emission (400/460 nm) of current InGaN light-emitting diodes (LEDs). The red emission peaking at 619 nm gave the relatively high (about 155%) intensity compared with the Y₃Al₅O₁₂ (YAG) (P46-Y3) standard phosphor. In addition, the saturated chromatic coordinates (0.638, 0.359) allowed it a promising candidate as a red phosphor in white LEDs application for illumination or display.     

The structure and luminescence properties of long afterglow phosphor Y3−xMnxAl5−xSixO12

A series of phosphors with the composition Y_3−xMn_xAl_5−xSi_xO₁₂ (x=0, 0.025, 0.050, 0.075, 0.150, 0.225, 0.300) were prepared with solid state reactions. The X-ray powder diffraction analysis of samples shows that the substitution of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance decrease to a certain extent. The emission spectra show that Mn²⁺ in Y₃Al₅O₁₂ emits yellow-orange light in a broad band. With the increment of substitution content, the emission intensity of the phosphors increases firstly then decreases subsequently, and the emission peak moves to longer wavelength. Afterglow spectra and decay curves show that all the Mn²⁺ and Si⁴⁺ co-doped samples emit yellow-orange light with long afterglow after the irradiation of ultraviolet light. The longest afterglow time is 18 min. Thermoluminescence measurement shows that there exist two kinds of traps with different depth of energy level and their depth decreases with the increment of substitution content.     

Luminescence and scintillation properties of YAG:Ce single crystal and optical ceramics

We use various techniques to study optical and scintillation properties of Ce-doped yttrium aluminum garnet, Y₃Al₅O₁₂ (YAG:Ce), in the form of a high-quality industrial single crystal. This was compared to optical ceramics prepared from YAG:Ce nanopowders. We present experimental data in the areas of optical absorption, radioluminescence, scintillation decay, photoelectron yield, thermally stimulated luminescence and radiation-induced absorption. The results point to an interesting feature—the absence of antisite (Y_Al, i.e. Y at the Al site) defects in optical ceramics. The scintillation decay of the ceramics is faster than that of the single crystal, but its photoelectron yield (measured with 1 μs integration time) is about 30-40% lower. Apart from the photoelectron yield value the YAG:Ce optical ceramic is fully comparable to a high quality industrial YAG:Ce single crystal and can become a competitive scintillator material.     

Luminescent characteristics of LiCaBo3:M (M=Eu, Sm, Tb, Ce, Dy) phosphor for white LED

LiCaBO₃:M (M=Eu³⁺, Sm³⁺, Tb³⁺, Ce³⁺, Dy³⁺) phosphors were synthesized by a normal solid-state reaction using CaCO₃, H₃BO₃, Li₂CO₃, Na₂CO₃, K₂CO₃, Eu₂O₃, Sm₂O₃, Tb₄O₇, CeO₂ and Dy₂O₃ as starting materials. The emission and excitation spectra were measured by a SHIMADZU RF-540 UV spectrophotometer. And the results show that these phosphors can be excited effectively by near-ultraviolet light-emitting diodes (UVLED), and emit red, green and blue light. Consequently, these phosphors are promising phosphors for white light-emitting diodes (LEDs). Under the condition of doping charge compensation Li⁺, Na⁺ and K⁺, the luminescence intensities of these phosphors were increased.     

Thermally stable deep-blue Ba1.2Ca0.8SiO4:Ce phosphor for white-light-emitting diode

A novel deep-blue phosphor, Ba_1.2Ca_0.8SiO₄:Ce³⁺, has been developed for white-light-emitting diodes. The phosphor exhibits two absorption bands at 280 and 325 nm, and an intense deep-blue emission peaking at 400 nm. With increasing Ce/Li concentrations, the lattice expands, and the emission peak is blueshifted. This correlation is explained in terms of the crystal field effect and the configurational coordinate diagram. This phosphor shows much higher thermal quenching temperature (225 °C) due to a weak electron-phonon interaction. Thus, it can be used as a sensitizer phosphor to excite other green or red phosphors, or a promising deep-blue phosphor for white-light-emitting diodes.     

Oxide coatings on Y3Al5O12:Tb particles

A coating method with precipitating process was developed to reduce the particle size and to improve the particle dispersion of Y₃Al₅O₁₂:Tb³⁺ phosphor prepared by sol-gel method. The particle morphology was observed by using SEM and TEM; and the particle size and its dispersion was measured by using laser scattering technique. Several coating materials were tested. Among them, Al₂(SiO₃)₃ coating not only reduced the particle size from several micrometers to ∼1 μm and improved the particle dispersion, but also well kept luminescent intensities and improved the duration of the phosphor under the bombardment of cathode ray. The mechanism of the particle size reduction was proposed.     

Low thermal quenching and high-efficiency Ce, Tb-co-doped Ca3Sc2Si3O12 green phosphor for white light-emitting diodes

Low thermal quenching and high-efficiency Ca₃Sc₂Si₃O₁₂:Ce³⁺ (CSSO:Ce³⁺) phosphors with co-doping Tb³⁺ ion were prepared by a solid state method and the properties of these phosphors were investigated. The results showed that co-doping of Tb³⁺ not only enhances the photoluminescence remarkably and decreases the thermal quenching of the phosphor, but also heightens the performances of the LEDs fabricated with the phosphor. A high-efficiency and low color temperature white LED was fabricated with the prepared CSSO:1%Ce³⁺, 0.5%Tb³⁺ and a red phosphor, indicating that CSSO:1%Ce³⁺,0.5%Tb³⁺ phosphor is a suitable green phosphor for the fabrication of high-efficiency white LEDs.     

硼酸对亚微米级Ca3Sc2Si3O12:Ce绿色荧光粉的制备及发光性能的影响

采用凝胶-燃烧法合成了Ca₃Sc₂Si₃O₁₂ ∶Ce绿色LED用荧光粉,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光光谱仪等对合成产物进行了分析和表征.结果表明:通过添加H₃BO₃做助熔剂,制得的荧光粉晶相纯正,颗粒形貌均呈现为较规则的类球形,而且所得荧光粉的粒径均小于1 μm.发射光谱呈现为一宽带,发射主峰位于505 nm,该宽峰对应于Ce³⁺关键词： 白光LED 荧光粉 3Sc₂Si₃O₁₂ ∶Ce')" href="#">Ca₃Sc₂Si₃O₁₂ ∶Ce 发光     

Synthesis and Characterization of Monodispersed SiO2@Y3Al5O12:Er3+ Core-Shell Particles

Submicron core-shell structure particles SiO₂@Y₃Al₅O₁₂:Er³⁺, which silica spherical particles was coated with an yttrium aluminum garnet (Y₃Al₅O₁₂) layer doped with Er³⁺, were prepared by the modified Pechini-Type sol-gel method for the first time. The structure and morphology of samples were detected by the X-ray powder diffraction (XRD) measurement, field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM), respectively. The results indicate that well-crystallized garnet nanocrystallines were formed on the surface of the silica particles. The luminescent spectra in near infrared and visible region of the core-shell structured SiO₂@Y₃Al₅O₁₂:Er³⁺ powders were also investigated and compared with those of the pure Y₃Al₅O₁₂:Er³⁺ and the Er³⁺ doped silicate glass. The results show that mono-dispersed SiO₂@Y₃Al₅O₁₂:Er³⁺ core-shell spherical particles with the near infrared, red and green luminescent emissions under the excitation of 980 nm laser diode have been successfully synthesized.     

Luminescence of BaAl2O4:Mn,Ce phosphor

Powder samples of barium aluminate doped with Mn²⁺ and Ce³⁺ were prepared by solid-state reaction method and their photoluminescence and thermoluminescence properties were studied. Substitution of Ca/Sr in place of Ba resulted in enhanced emission from Ce³⁺ ions without changing the spectral profile. Cerium efficiently sensitized the manganese luminescence in barium aluminate. Photoluminescence and thermo luminescence observations have indicated the presence of V_k³⁺ defects in undoped barium aluminate. However, Barium aluminate (either undoped or doped with manganese) did not exhibit long afterglow.     

Photoluminescence properties and effects of dopant concentration in Bi2ZnB2O7:Tb phosphor

A novel green phosphor, Tb³⁺ doped Bi₂ZnB₂O₇ was synthesized by conventional solid state reaction method. The phase of synthesized materials was determined using the XRD, DTA/TG and FTIR. The photoluminescence characteristics were investigated using spectrofluorometer at room temperature. Bi₂ZnB₂O₇:Tb³⁺ phosphors excited by 270 nm and 485 nm wavelengths. The emission spectra were composed of three bands, in which the dominated emission of green luminescence Bi₂ZnB₂O₇:Tb³⁺ attributed to the transition ⁵D₄ → ⁷F₅ is centered at 546 nm. The dependence of the emission intensity on the Tb³⁺ concentration for the Bi_2−xTb_xZnB₂O₇ (0.01 ≤ x ≤ 0.15) was studied and observed that the optimum concentration of Tb³⁺ in phosphor was 13 mol% for the highest emission intensity at 546 nm.     

共沉淀法制备Y2SiO5∶Er3+ ,Yb3+ ,Tm3+及其上转换发光性能研究

采用化学共沉淀法制备了系列Y_1.98-2xYb_2x Er_0.02SiO₅(0.00≤x≤0.15)以及Y_1.736Yb_0.24Er_0.02Tm_0.004SiO₅上转换发光材料,比较了室温下Y_1.98-2xYb_2x Er_0.02 SiO₅ (x=0.00,0.08)样品在400—1600 nm范围内的吸收光谱,测量了所有样品在976 nm OPO激光器激发下的上转换发射光谱,以及Er³⁺离子⁴S_3/2(⁴F_9/2)→⁴I_15/2,Tm³⁺离子¹G₄→³H₆荧光衰减曲线和不同激发功率下的上转换蓝光发射强度,从而分析讨论了Er³⁺,Tm³⁺在Y₂SiO₅中的上转换发光机理.研究结果表明:在1250 ℃相对较低的温度下合成了X2型单斜晶系Y₂SiO₅ ∶Ln³⁺(Ln³⁺=Er³⁺,Yb³⁺,Tm³⁺),Yb³⁺的敏化显著增强了样品在976 nm附近的吸收能力,并大幅度加宽了该处的吸收带.分析上转换发射光谱发现:上转换绿光和红光强度都随着Yb³⁺浓度的增加先增强后减弱,但红光的猝灭浓度较高,归因于Er³⁺→Yb³⁺反向能量传递ETU4和Yb³⁺→Er³⁺正向能量传递ETU3过程的发生;上转换蓝光发射是三光子吸收过程,是通过Yb³⁺,Tm³⁺之间三次声子辅助的能量转移方式实现的. 关键词： 上转换 共沉淀 2SiO₅∶Er³⁺')" href="#">Y₂SiO₅∶Er³⁺ 3+')" href="#">Yb³⁺ 3+')" href="#">Tm³⁺     

Unified calculations of the optical and electron paramagnetic resonance spectral data for Ce ion in Y3Ga5O12 crystal

Seven crystal field energy levels (obtained from the optical spectra) and three g factors g_x, g_y and g_z (obtained from electron paramagnetic resonance (EPR) spectra) for Ce³⁺ ion in Y₃Ga₅O₁₂ crystal are calculated together by diagonalizing a complete energy matrix. The Hamiltonian of this energy matrix includes all the interactions for 4f¹ ion Ce³⁺ in rhombic crystal field and under an external magnetic field, and so the optical and EPR data can be studied in a unified way. The calculated crystal field energy levels are in better agreement with the experimental values than the calculated values in the previous paper, and the g factors (which have not been calculated previously) are explained reasonably. The results are discussed.     

Enhanced luminescence of Dy in Y3Al5O12 by Bi co-doping

In the present paper, phosphors with the composition Y_3−x−yAl₅O₁₂:Bi³⁺_x, Dy³⁺_y were synthesized with solid state reactions. The luminescence properties of Bi³⁺ and Dy³⁺ in Y₃Al₅O₁₂(YAG) and the energy transfer from Bi³⁺ to Dy³⁺ were investigated in detail. Bi³⁺ in YAG emits one broad band peaking at 304 nm which can be ascribed to the transition from excited states ³P_{0, 1} to ground state ¹S₀. Dy³⁺ in YAG emits two groups of peaks around 484 and 583 nm, respectively, which can be ascribed to the transitions from excited state ⁴F_9/2 to ground states ⁶H_15/2 and ⁶H_13/2. The co-doping of Bi³⁺ enhances the luminescent intensity of Dy³⁺ by ∼7 times because Bi³⁺ can transfer the absorbed energy to Dy³⁺ efficiently. The mechanism of energy transfer was also discussed.     

Luminescence of La3F3[Si3O9]:Ce

The luminescence properties of Ce³⁺ in La₃F₃[Si₃O₉] are reported. Excitation and emission bands corresponding to 4f¹→5d¹ transitions of Ce³⁺ were identified. The center of gravity of the 5d states lies at remarkable high energy (43.2×10³ cm⁻¹) for Ce³⁺ in a silicate compound. This high value is attributed to the combined oxygen/fluoride coordination of the Ce³⁺ ion. Emission from the lowest 4f5d level to the ²F_5/2 and ²F_7/2 levels was found at 32.4×10³ and 30.4×10³ cm⁻¹. These results are compared with literature data on silicates and fluorides. From the values found for Ce³⁺, predictions are made for the positions of the 4f5d bands of Pr³⁺ and Er³⁺ in La₃F₃[Si₃O₉]. For both ions, it is concluded that in this host lattice emission is expected from high lying 4fⁿ energy levels.