Synergistic inhibitive effect of tartarate and tungstate in preventing steel corrosion in aqueous media

The inhibitive effect of tartarate was studied as a coinhibitor with tungstate in preventing carbon steel corrosion in aqueous solutions. Open circuit potential measurements, weight-loss measurements and polarization studies were conducted to understand the domains of corrosion and passivation. Tartarate ions, even at low concentration, showed excellent synergistic corrosion inhibition characteristics. A mixture of 500 ppm each of the inhibitors was found to be optimum inhibitor combination. This inhibitor combination showed inhibition efficiency as high as 98%. Tartarate in the synergistic inhibitor combination did not reveal any dominant role in shifting the surface potential, even though it showed substantial passivation effect. The present study explores and evaluates the synergistic combination as a potential inhibitor system in combating corrosion on carbon steel surface.     

Synergistic effect of iodide ions on the corrosion inhibition of steel in 0.5 M H2SO4 by new chalcone derivatives

The effect of addition of 4′,4-dihydroxychalcone (P₁), 4-aminochalcone (P₂) and 4-bromo, 4′-methoxychalcone (P₃) on the corrosion of steel in 0.5 M sulphuric acid has been studied by weight loss measurements, potentiodynamic and EIS measurements. We investigate the synergistic effect of iodide ions on the corrosion inhibition of steel in the presence of chalcone derivatives. The corrosion rates of the steel decrease with the increase of the chalcones concentration, while the inhibition efficiencies increase. The addition of iodide ions enhances the inhibition efficiency considerably. The presence of iodide ions increases the degree of surface coverage. The synergism parameters S_Θ and S_I, calculated from surface coverage and the values of inhibition efficiency, in the case of chalcone derivatives are found to be larger than unity. The enhanced inhibition efficiency in the presence of iodide ions is only due to synergism and there is a definite contribution from the inhibitors molecules. E (%) obtained from the various methods is in good agreement. Polarisation measurements show also that the compounds act as cathodic inhibitors.     

Enhanced corrosion resistance of mild steel in molar hydrochloric acid solution by 1,4-bis(2-pyridyl)-5H-pyridazino[4,5-b]indole: Electrochemical, theoretical and XPS studies

The inhibition effect of the new pyridazine derivative, namely 1,4-bis(2-pyridyl)-5H-pyridazino[4,5-b]indole (PPI) against mild steel corrosion in 1 M HCl solutions was evaluated using weigh loss and electrochemical techniques (potentiodynamic polarisation curves and impedance spectroscopy). The experimental results suggest that PPI is a good corrosion inhibitor and the inhibition efficiency increased with the increase of PPI concentration, while the adsorption followed the Langmuir isotherm. X-ray photoelectron spectroscopy (XPS) and theoretical calculation of electronic density were carried out to establish the mechanism of corrosion inhibition of mild steel with PPI in 1 M HCl medium. The inhibition action of this compound was, assumed to occur via adsorption on the steel surface through the active centres contained of the molecule. The corrosion inhibition is due to the formation of a chemisorbed film on the steel surface.     

Inhibition of steel pitting corrosion in HCl by some inorganic anions

The effect of Mn and V content on corrosion behavior of mild steel in different concentration of HCl was investigated. The increase of Mn and V content in the steel sample leads to increasing corrosion resistance. The effect of phosphate, molybedate and chromate anions on the corrosion of steel in HCl solution has been studied using weight loss, potentiodynamic and scanning electron microscope (SEM) techniques. The addition of increasing concentrations of phosphate, molybedate and chromate anions causes a shift of the pitting potential (E_pit) in the positive direction, indicating the inhibitive effect of the added anions on the pitting attack. The phosphate anion has a stronger inhibitive effect of the pitting corrosion. The inhibition efficiency (IE) of different inhibitors increases with the increasing of phosphate concentration and decreases with the increasing the concentration of molybedate and chromate anions. The presence of these anions inhibits the pitting corrosion of steel samples in the order phosphate > molybedate > chromate. The effect of different inorganic anions on the corrosion behavior of two different composition steel samples was also studied in HCl solution.     

An electroactive co-polymer as corrosion inhibitor for steel in sulphuric acid medium

The corrosion behavior of mild steel in sulphuric acid solution containing various concentrations of a co-polymer formed between maleic anhydride and N-vinyl-2-pyrrolidone (VPMA) was investigated using weight-loss, polarization and electrochemical impedance techniques. The polymer acts as an effective corrosion inhibitor for steel in sulphuric acid medium. The inhibition process is attributed to the formation of an adsorbed film of co-polymer on the metal surface which protects the metal against corrosion. Scanning electron microscopy (SEM) studies of the metal surfaces confirmed the existence of an adsorbed film. The adsorption followed the Langmuir isotherm. The protection efficiency increased with increase in inhibitor concentration and decreased with increase in temperature and acid concentration. The thermodynamic functions of the adsorption and dissolution processes were evaluated.     

Inhibition of corrosion of aluminium in presence of fluorescein in basic medium

The influence of Fluorescein in conjunction with calcium oxide on the corrosion of Aluminium in 1.0 N NaOH was studied by galvanostatic studies and weight loss studies. It has been found that the inhibition of corrosion of aluminium increased with the increasing concentration of the inhibitor. The maximum inhibition efficiency of fluorescein alone was found to be 30.80%. However, the addition of calcium oxide increased the maximum inhibition efficiency to 53.71%. The corrosion process was found to be under the anodic control, in the presence or in the absence of inhibitor. The inhibition was found to be mixed type. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Chennai, Inida, Nov. 28–30, 2003.     

The effect of some Schiff bases on the corrosion of aluminum in hydrochloric acid solution

The inhibition effect of Schiff bases benzylidene-(2-methoxy-phenyl)-amine (A), (2-methoxy-phenyl)-(4-methyl-benzylidene)-amine (B), (4-chloro-benzylidene)-(2-methoxy-phenyl)-amine (C) and (4-nitro-bezylidene)-(2-methoxy-phenyl)-amine (D) on the corrosion of aluminum in 1 M HCl has been studied by polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurements. It has been found that all the studied Schiff bases are excellent inhibitors. Maximum inhibition was obtained for 0.01 M Schiff base A. Results show that the inhibition efficiency increases with decreasing in temperature and increasing in concentration of Schiff base. Polarization curves reveal that the used inhibitors are mixed type inhibitors. The surface adsorption of the Schiff bases leads to a decrease of double layer capacitance as well as an increase of polarization resistance. The inhibitor performance depends strongly on the type of function groups substituted on benzene ring. The adsorption of used compounds on the aluminum surface obeys a Langmuir isotherm and has a physical mechanism. Thermodynamic parameters for both dissolution and adsorption processes were determined. The quantum chemical study of the corrosion inhibition efficiency of the Schiff bases on Al in molar HCl was carried out.     

Inhibition of steel corrosion in 2 M H3PO4 by artemisia oil

Artemisia oil (Ar) is extracted from artemisia herba alba collected in Ain es-sefra-Algeria, and tested as corrosion inhibitor of steel in 2 M H₃PO₄ using weight loss measurements, electrochemical polarisation and EIS methods. The naturally oil reduces the corrosion rate. The inhibition efficiency was found to increase with oil content to attain 79% at 6 g/l. Ar acts as a cathodic inhibitor. The effect of temperature on the corrosion behaviour of steel indicates that inhibition efficiency of the natural substance decreases with the rise of temperature. The adsorption isotherm of natural product on the steel has been determined.     

Inhibition of copper corrosion by bis-(1,1′-benzotriazoly)-α,ω-diamide compounds in aerated sulfuric acid solution

Three kinds of novel corrosion inhibitors, bis-(1,1′-benzotriazoly)-α,ω-succinyldiamide (BSU), bis-(1,1′-benzotriazoly)-α,ω-adipoyldiamide (BAD), and bis-(1,1′-benzotriazoly)-α,ω-azelayldiamide (BAZ) were synthesized and certified by IR and ¹H NMR. Their corrosion inhibition effects for copper in 0.5 M H₂SO₄ were evaluated by weight-loss method. It shows that among the three compounds, only BSU behaves better compared with BTA. The inhibition efficiency (IE) increased with increasing BSU concentration to 85.2% at the 5 × 10⁻⁴ M level. Polarization studies showed that BSU suppressed both anodic and cathodic corrosion reactions. The minimum energy conformation of these compounds was obtained by MM2 force field program. The two benzotriazoly moieties in BSU molecule are more parallel than in other compounds. This is benefit to increase the inhibition effects of BSU.     

The inhibition of corrosion of mild steel in 0.5 M sulfuric acid solution in the presence of benzyl triphenyl phosphonium bromide

Benzyl triphenyl phosphonium bromide (BTPPB) has been evaluated as a corrosion inhibitor for mild steel in aerated 0.5 M sulfuric acid solution by galvanostatic polarization and potentiostatic polarization methods. The effect of BTPPB on the corrosion current is measured at various temperatures and concentrations. The inhibitor efficiencies, effective activation energies and heat of adsorption have been calculated. The inhibition efficiency increases with increase in inhibitor concentration to reach 99.3% for 10⁻² M. The nature of adsorption of BTPPB on the metal surface has also been examined. Probable mode of adsorption on the metal surface has been proposed using infrared spectroscopic studies. The electrochemical results have also been supplemented by surface morphological studies and quantum chemical analysis.     

Khillah extract as inhibitor for acid corrosion of SX 316 steel

The inhibitive effect of the extract of khillah (Ammi visnaga) seeds, on the corrosion of SX 316 steel in HCl solution was determined using weight loss measurements as well as potentiostatic technique. It was found that the presence of the extract reduces markedly the corrosion rate of steel in the acid solution. The inhibition efficiency increases as the extract concentration is increased. The inhibitive effect of khillah extract was discussed on the basis of adsorption of its components on the metal surface. Negative values were calculated for the energy of adsorption indicating the spontaneity of the adsorption process. The formation of insoluble complexes as a result of interaction between iron cations and khellin, which present in the extract, was also discussed.     

Corrosion inhibition of iron in acidic solutions by alkyl quaternary ammonium halides: Correlation between inhibition efficiency and molecular structure

The corrosion inhibition of iron in 0.5 M H₂SO₄ solutions by alkyl quaternary ammonium halides (AQAH) inhibitors has been studied by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) measurements. The correlation between inhibition efficiency and molecular structure of the AQAH compounds is investigated. The results show that besides the concentration, the structure of alkyl groups and the type of halide ions of these AQAH inhibitors greatly influence the inhibition efficiency. Data obtained from EIS measurements are analyzed to model the corrosion inhibition process through appropriate equivalent circuit models.     

Dye-sensitized solar cells with PVA–KI–EC–PC gel electrolytes

Gel polymer electrolytes consisting of PVA–EC–PC–KI have been studied in this work. The highest room temperature (298 K) conductivity of 12.92 mS cm $^{-1}$ is obtained for PVA-based gel polymer electrolyte (GPE) with composition 14.5 PVA-21.7 EC-28.7 PC-30.4 KI-4.7 $\text{ I }_{2}$ (in wt%). The high conductivity is due to the highest number density of mobile ions in the electrolyte. The conductivity–temperature dependence follows the Vogel–Tamman–Fulcher (VTF) relationship. The trend of pseudoactivation energy $(E_{a})$ with salt concentration is contrary to that of conductivity. PVA-based GPEs with 5 to 35 wt% KI were used as a medium in ruthenium 535 (N719) dye-sensitized solar cells. The efficiency ( $\eta $ ) of the solar cells increased as the composition of KI salt in the electrolyte increased. The highest power conversion efficiency of 2.74 % is obtained for solar cells fabricated with electrolyte containing 35 wt% KI. The variation of efficiency follows the same trend as short circuit current density $(J_{sc})$ . The increase in $J_{sc}$ is influenced by the increase in iodide ion concentration in the electrolyte that assists the redox process and helps electron to shuttle between ionized dye and counter electrode.     

Effect of ultrasonically induced cavitation on inhibition behavior of polyethylene glycol on carbon steel corrosion

In this investigation the influence of 24 kHz ultrasound wave upon the corrosion of carbon steel in 3N sulphuric acid at 25 degrees C in the presence of inhibitors was studied. The inhibitors were polyethylene glycols (PEG) in different molecular weights (from 400 up to 10,000 gmol(-1)). The polarization and impedance spectroscopy results show the effectiveness of polyethylene glycols on the cavitation-corrosion inhibition of carbon steel in sulphuric acid. The inhibition efficiency is increased with increasing mean molecular weight of polymer and its concentration. The weight loss method has confirmed these results. The analysis of SEM images indicates that these inhibitors prevent propagation of pits on the eroded specimen. The inhibition effect of PEGs can be attributed to cushioning effect of adsorbed polymers on cavitation phenomenon produced by bubble collapse.     

Effect of cerium ions on corrosion inhibition of PANI for iron in 0.5 M H2SO4

In recent years conducting polymers such as polyaniline are used as corrosion inhibitors for metals in acids. The performance of the inhibitor can be enhanced either by the addition of halide ions or metal cations. A study has been made on the effect of addition of ceric ions on the corrosion inhibition performance of polyaniline for iron in 0.5 M H₂SO₄. Techniques such as electrochemical impedance spectroscopy, potentiodynamic polarization and linear polarization resistance methods have been employed to study the corrosion inhibition. The polyaniline has been used in the concentration range of 10-100 ppm and the ceric ions concentration has been maintained at 1 × 10⁻³ M. The inhibition efficiency of polyaniline at 10 ppm has been increased from 53 to 88% and for 50 ppm from 71 to 90% in the presence of ceric ions. The enhanced inhibition of polyaniline in presence of ceric ions is due to the higher coverage of polyaniline-cerium complex.     

Pyridine–pyrazole compound as inhibitor for steel in 1 M HCl

The influence of 3,5-dimethyl-1H-pyrazole (P1), pyridine (P2) and 2-(3-methyl-1H-pyrazol-5-yl) pyridine (P3) on the corrosion inhibition of steel in molar hydrochloric acid solution is studied using weight-loss, potentiodynamic and EIS measurements. Results obtained shows that P3 is the best inhibitor and its inhibition efficiency increases with the increase of concentration to attain 89% since 10⁻³ M. Potentiodynamic polarisation studies clearly reveal that it acts essentially as a cathodic inhibitor. The inhibitor studied reduces the corrosion rates. E (%) values obtained from various methods used are in good agreement. Adsorption of P3 on steel surface has an S-shaped adsorption isotherm.     

Control of tensile stress on inducing formation and tunability of (100) oriented Pb x Sr1−x TiO3 thin films

(100) Oriented Pb _x Sr_1?x TiO₃ (PSTO) thin films are prepared on indium tin oxide (ITO)/glass substrates by sol–gel technique while inserting doped PbTiO₃ (PTO)-inducing layer in between. The effect of tensile stress in PSTO on tunability and (100) orientation of the thin films was investigated using X-ray diffraction, scanning electron microscopy, transmission electron microscope, and atomic force microscope, respectively. Results show that PSTO thin film deposited on doped PTO has (100) oriented structure while it is randomly oriented when deposited directly on the ITO/glass substrate. Lattice mismatch between PSTO and PTO appears, in which the in-plane lattice constant c is 0.3922–0.3924 nm in the former and 4.02–4.07 nm in the latter, respectively, contributing tensile stress in the PSTO due to different lattice constants between them. The stress in the PSTO thin film is 3.04, 3.15, 3.59 and 4.47 GPa when the doped PTOs are Fe–PTO, Tb–PTO, Co–PTO and Zn–PTO, respectively. The orientation degrees of PSTO thin films are from 89.63, 90.31, 91.92 to 93.29 % with increasing stress of PSTO on Fe–PTO, Tb–PTO, Co–PTO and Zn–PTO, respectively. Tunabilities of the well-oriented PSTO thin films increase in ascending order of 63 < 65 < 69 < 73 % when induced by oriented PTO layers of Fe–PTO, Tb–PTO, Co–PTO and Zn–PTO, respectively, which is in accordance with the degree of (100) orientation appearing in the thin films. The high tunability appears in the PSTO thin film while high (100) orientation is derived from the tensile stress. It is much higher than that of randomly oriented PSTO thin film.     

The inhibition effect of some amino acids towards Pb-Sb-Se-As alloy corrosion in sulfuric acid solution

The inhibition effect of three amino acids towards the corrosion of Pb-Sb-Se-As alloy in 1.28 s.g. H₂SO₄ solution was investigated with linear polarization and weight loss measurements methods. The results drawn from two different techniques are comparable. The used amino acids were tryptophane, proline and methionine. The effect of inhibitor concentration and temperature against inhibitor action was investigated. It was found that these inhibitors act as good inhibitors for the corrosion of lead alloy in H₂SO₄ solution. Increasing inhibitor concentration increases the inhibition efficiency. It was found that adsorption of used amino acids on lead alloy surface follows Langmuir isotherm.     

Tween-40 as corrosion inhibitor for cold rolled steel in sulphuric acid: Weight loss study, electrochemical characterization, and AFM

The inhibition action of a non-ionic surfactant of tween-40 on the corrosion of cold rolled steel (CRS) in 0.5-7.0 M sulphuric acid (H₂SO₄) was studied by weight loss and potentiodynamic polarization methods. Atomic force microscope (AFM) provided the surface conditions. The inhibition efficiency increases with the tween-40 concentration, while decreases with the sulphuric acid concentration. The adsorption of inhibitor on the cold rolled steel surface obeys the Langmuir adsorption isotherm equation. Effect of immersion time was studied and discussed. The effect of temperature on the corrosion behavior of cold rolled steel was also studied at four temperatures ranging from 30 to 60 °C, the thermodynamic parameters such as adsorption heat, adsorption free energy and adsorption entropy were calculated. A kinetic study of cold rolled steel in uninhibited and inhibited acid was also discussed. The kinetic parameters such as apparent activation energy, pre-exponential factor, rate constant, and reaction constant were calculated for the reactions of corrosion. The inhibition effect is satisfactorily explained by both thermodynamic and kinetic parameters. Polarization curves show that tween-40 is a cathodic-type inhibitor in sulphuric acid. The results obtained from weight loss and potentiodynamic polarization are in good agreement, and the tween-40 inhibition action could also be evidenced by surface AFM images.     

1,3-Bis(3-hyroxymethyl-5-methyl-1-pyrazole) propane as corrosion inhibitor for steel in 0.5 M H2SO4 solution

The effect of addition of 1,3-bis(3-hyroxymethyl-5-methyl-1-pyrazole) propane (M = 264 g). HMPP on steel corrosion in 0.5 M sulphuric acid is studied by weight-loss, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) measurements at various temperatures. The results obtained showed that HMPP acts as a good corrosion inhibitor. The inhibition efficiency increases with the bipyrazole compound to attain 88%. It acts as a mixed-type inhibitor. Trends in the increase of charge-transfer resistance and decrease of capacitance values also show the adsorption of the molecule on the metal surface. The bipyrazole adsorbs on the steel surface according to the Langmuir isotherm adsorption model. Effect of temperature indicates that inhibition efficiency decreases with temperature between 25 and 85 °C.