Helium Droplets: An Apparatus to Study Ultra Cold Chemistry

A new pulsed helium nano droplets machine has been constructed. The droplets were gener-ated by expansion of the pure helium through the cryogenic valve attached to a closed-cycle cryostat. The mean size of helium droplets can be controlled between 103 and 105 helium atoms by tuning the backing pressure (10-40 bar) and temperature (10-30 K). Compared with the continuous-flow beam source, the density of droplet is at least one order of magni-tude higher, which offers the opportunity to combine the system with the commercial pulsed laser to study chemical reactions inside of the superfluid helium at ultra-low temperature. The performance for the system has been checked by studying the photodissociation of CH₃I doped droplets at 252 nm with the velocity map imaging technique. The photofragments, CH₃, were detected by (2+1) resonance enhanced multiphoton ionization. The speed and angular distributions derived from resulting images show clear evidence of the relaxation effect by the surrounding helium atoms. The pulsed helium droplets depletion spectroscopy was also demonstrated. The depletion spectrum of benzene doped helium droplets indicatesthat less than 3% depletion can be observed with the newly constructed apparatus.     

Spectroscopic characterization of a neon surface-wave sustained (2.45 GHz) discharge at atmospheric pressure

In this paper a spectroscopic study of a microwave (2.45 GHz) neon surface-wave sustained discharge (SWD) at atmospheric pressure in a quartz tube has been carried out in order to determine the plasma characteristic parameters (e.g. electron temperature and density, gas temperature, absorbed power per electron) and also to identify possible deviations from the thermodynamic equilibrium for this kind of microwave discharge. The results have been compared to experiments in the literature for other noble gas (helium and argon) SWDs generated under similar experimental conditions. Intermediate values between those of argon and helium plasmas were obtained for characteristic neon plasma parameters (temperatures and electron density). An important departure from the Saha equilibrium was exhibited by neon SWDs.     

The role of the He I and He II metastables in the population of the Sn II,Sn III and Sn IV ion levels

On the basis of the temporal evolutions of the singly, doubly and triply ionized tin (Sn II, Sn III and Sn IV, respectively) spectral line intensities, in the pulsed helium and nitrogen plasmas, the important role of the He I and He II metastables has been observed in the Sn II, Sn III and Sn IV ionization and population processes. According to these processes, one can expect realization of several laser levels in the Sn II (11.07, 11.20, 12.44 and 13.11 eV), Sn III (15.91, 17.82, 19.13 and 20.19 eV) and Sn IV (20.51 eV) spectra. The modified version of the linear, low-pressure, pulsed arc was used as a plasma source operated in helium with tin atoms, as impurities, evaporated from tin cylindrical plates located in the homogenous part of the discharge tube. This plasma source provides good conditions for a generation of the Sn III, Sn IV and Sn V ions at relatively low electron temperatures (below 18,000 K) providing low background radiation around the intense Sn IV and Sn III spectral lines in the helium plasma. The 222.613 ± 0.0005 nm Sn IV line, not observed up to now, has been identified. The marked, but not classified 243.688 nm Sn spectral line is sorted by ionization stages. The shapes of Sn III and Sn IV lines, ranged between 207 nm and 307 nm, have been obtained. At a 17,500 K electron temperature and 1.07 × 10²³ m^− 3 electron density the Stark broadening was found as the dominant mechanism in the mentioned lines broadening. The measured Stark widths of the prominent nine Sn IV and seven Sn III lines are the first data in the literature. The Stark widths of the intense 229.913 nm and 288.766 nm Sn IV lines can be used for the plasma electron density and temperature diagnostics purposes.     

Approximately N -representable density functional density matrices: The case of large N

Density matrices approximatelyN-representable by a correlated determinant wavefunction (CDWF) have been previously derived. For the case of helium it had been shown how to obtain these density matrices as density functionals. Here it is shown that the same procedures, used for helium, generalize to the case for the number of electronsN-large. The result is a procedure for obtaining approximately CDWFN-representable density matrices which are functionals of the density for largeN.     

On the Stark broadening in the Au I and Au II spectra from a helium plasma

The Stark FWHM (Full-Width at Half of the Maximal line intensity, W) of 5 neutral and 26 singly ionized gold (Au I and Au II, respectively) spectral lines have been measured in laboratory helium plasma at approximately 16,600 K electron temperature and 7.4 × 10²² m^− 3 electron density. Five Au I and ten Au II W values are reported for the first time. The Au II W values are compared with recent theoretical data, calculated based on a modified semi-empirical approach, and also with existing experimental W values. Our normalized Stark widths are six times higher than those measured in a laser-produced plasma. Possible explanation of this is recommended here. An agreement (within the accuracy of the experiment and uncertainties of the theoretical approach used) with the recently calculated W data was found in the 6p–7s Au II transition. The calculated hyperfine splitting for the five Au II lines in the 6s–6p transition is also presented. At the stated helium plasma conditions, Stark broadening has been found to be the dominant mechanism in the Au I and Au II line shape formation. A modified version of the linear low-pressure pulsed arc was used as a plasma source operated in helium, with gold atoms as impurities evaporated from the thin gold cylindrical plates located in the homogeneous part of the discharge, providing conditions free of self-absorption. This plasma source ensures good conditions for generation of excited gold ions due to Penning and charge exchange effects.     

Bias in the temperature of helium nanodroplets measured by an embedded rotor

The rovibrational spectra of molecules dissolved in liquid 4He nanodroplets display rotational structure. Where resolved, this structure has been used to determine a temperature that has been assumed to equal that of the intrinsic excitations of the helium droplets containing the molecules. Consideration of the density of states as a function of energy and total angular momentum demonstrates that there is a small but significant bias of the rotor populations that make the temperature extracted from a fit to its rotational level populations slightly higher than the temperature of the ripplons of the droplet. This bias grows with both the total angular momentum of the droplet and with the moment of inertia of the solute molecule.     

Dynamic Behavior of Rotation Transmission Nano-System in Helium Environment: A Molecular Dynamics Study

The molecular dynamics (MD) method is used to investigate the influence of the shielding gas on the dynamic behavior of the heterogeneous rotation transmission nano-system (RTS) built on carbon nanotubes (CNTs) and boron nitride nanotube (BNNT) in a helium environment. In the heterogeneous RTS, the inner CNT acts as a rotor, the middle BNNT serves as a motor, and the outer CNT functions as a stator. The rotor will be actuated to rotate by the motor due to the interlayer van der Waals effects and the end effects. The MD simulation results show that, when the gas density is lower than a critical range, a stable signal of the rotor will arise on the output and the rotation transmission ratio (RRT) of RTS can reach 1.0, but as the gas density is higher than the critical range, the output signal of the rotor cannot be stable due to the sharp drop of the RRT caused by the large friction between helium and the RTS. The greater the motor input signal of RTS, the lower the critical working helium density range. The results also show that the system temperature and gas density are the two main factors affecting the RTS transmission behavior regardless of the size of the simulation box. Our MD results clearly indicate that in the working temperature range of the RTS from 100 K to 600 K, the higher the temperature and the lower the motor input rotation frequency, the higher the critical working helium density range allows.     

Effect of triple beam irradiation on microstructural evolution in austenitic stainless steel

An austenitic stainless steel was simultaneously irradiated with a triple beam of nickel, helium and hydrogen ions in the temperature range 573–673 K. Microstructural evolution in the specimen was observed from the cross-sectional direction normal to the incident surface using a transmission electron microscope. Synergistic effects of displacement damage, hydrogen and helium were characterized by decreasing the number density of dislocation loops in this temperature range.     

Characterization of Tin Oxide Based Sol-Gel Coatings on Borosilicate Glasses by X-Ray Reflectivity

The X-ray reflectivity technique was applied in the study of tin oxide films deposited by sol-gel dip-coating on borosilicate glasses. The influence of the withdrawal speed and temperature of thermal treatment on the film structure was analyzed. We have compared the thermal evolution of the density and the shrinkage of the films with these properties measured for the monolithic xerogel by helium picnometry and thermomechanical analysis. In agreement with the Landau-Levich model, the layer thickness increases by increasing the withdrawal speed. Nevertheless, it decreases with the increase of the thermal treatment temperature, due to the densification process. The values of apparent density are smaller than the skeletal density, which shows that the films are porous. The comparison between the film and the monolith indicates that shrinkage during firing is anisotropic, occurring essentially perpendicular to the coating surface.     

Optical emission spectroscopy of electron-cyclotron-resonance-heated helium mirror plasmas

In this experiment emission spectroscopy in the 3000–5000 Å range has been utilized to determine the electron temperature (15–60 eV) and ion density (2–5 x 10¹¹ cm^–3) of helium plasmas produced by the Michigan mirror machine⁽¹⁾ (MIMI). The plasma is generated and heated by whistler-mode electron-cyclotron resonance (ECR) waves at 7.43 GHz with 400–900 W power in 80-ms-long pulses. Gas fueling is provided at the midplane region by a leak valve with a range in pressure of 3 x 10 to 2 x 10⁴ Torr. Emission line intensities are interpreted using a model of the important collisional and radiative processes occurring in the plasma. The model examines secondary processes such as radiation trapping, excitation transfer between levels of the carne principle quantum number, and excitation front metastable states for plasmas in the parameter range of MIMI (n _c = 1–6 x 10¹¹ cm^–3). Front the analysis of line intensity ratios for neutral helium, the electron temperature is measured and its dependence upon the gas pressure and microwave power is determined. These temperatures agree with those obtained by Langmuir probe measurements. Art analysis of the line intensity ratio between singly ionized helium and neutral helium yields a measurement of the ion density which is in good agreement with electron density measurements made by a microwave interferometer.     

Effects of Permeation of Helium through the Walls of Fused Silica Capillary GC Columns

Hold-up times and peak widths have been measured in long fused silica GC capillary columns at high temperature with helium as the carrier gas. The results lead to the conclusion that the helium permeates through the column walls. The conventional Poiseuille theory of carrier gas flow has been extended to include this phenomenon. The resulting “loss modified Poiseuille” model, which uses literature values for the permeability of fused silica to helium, has been used to simulate the observed behavior. Good agreement between simulation and experiment validates the model. Simulations have been used to explore the effect of column permeability on hold-up times, peak widths, and velocity profiles over a broad range of column geometries.     

Solubility and thermodynamics of dissolution of helium in water at gas partial pressures of 0.1–100 MPa within a temperature range of 278–353 K

The tables of recommended numerical values for the water solubility of helium at gas partial pressures of 0.1–100 MPa within a temperature range of 278.15–353.15 K are given. The thermodynamic characteristics of dissolution of helium in water at the mentioned parameters of state have been calculated. The independence of the dissolution enthalpy on the pressure has been recognized and explained.     

Modeling of gas adsorption equilibrium over a wide range of pressure: a thermodynamic approach based on equation of state

A thermodynamic approach based on the Bender equation of state is suggested for the analysis of supercritical gas adsorption on activated carbons at high pressure. The approach accounts for the equality of the chemical potential in the adsorbed phase and that in the corresponding bulk phase and the distribution of elements of the adsorption volume (EAV) over the potential energy for gas-solid interaction. This scheme is extended to subcritical fluid adsorption and takes into account the phase transition in EAV. The method is adapted to gravimetric measurements of mass excess adsorption and has been applied to the adsorption of argon, nitrogen, methane, ethane, carbon dioxide, and helium on activated carbon Norit R1 in the temperature range from 25 to 70 degrees C. The distribution function of adsorption volume elements over potentials exhibits overlapping peaks and is consistently reproduced for different gases. It was found that the distribution function changes weakly with temperature, which was confirmed by its comparison with the distribution function obtained by the same method using nitrogen adsorption isotherm at 77 K. It was shown that parameters such as pore volume and skeleton density can be determined directly from adsorption measurements, while the conventional approach of helium expansion at room temperature can lead to erroneous results due to the adsorption of helium in small pores of activated carbon. The approach is a convenient tool for analysis and correlation of excess adsorption isotherms over a wide range of pressure and temperature. This approach can be readily extended to the analysis of multicomponent adsorption systems.     

Non-thermal features of atmospheric-pressure argon and helium microwave-induced plasmas observed by laser-light Thomson scattering and Rayleigh scattering

Laser-light Thomson scattering and Rayleigh scattering have been measured from a microwave-induced plasma sustained at atmospheric pressure, using both argon and helium as a support gas. The measurements were performed at several spatial positions in each plasma, and at forward microwave power levels of 350 W for argon, and at 350 W and 100 W for helium. It was found from these measurements that both argon and helium plasmas deviate substantially from local thermodynamic equilibrium (LTE), Measured electron temperatures range from 13 000–21 500 K, whereas gas temperatures are generally lower by a factor of 2 to 10, depending on the support gas and the spatial position in the discharge. At the same forward microwave power, the electron temperature of the helium plasma is about 3500–7000 K higher than that of the argon plasma. Yet, the argon plasma has a higher electron number density than the helium plasma. Electron number densities in both argon and helium plasmas are roughly two to three orders of magnitude lower than what LTE would predict, based on the measured electron temperatures and the Saha Equation. Even more interestingly, signals in the far-wing portion of the Thomson-scattering spectrum were found to be significantly higher than are predicted by a fitted Maxwellian curve, indicating that there exists an over-population of high-energy electrons. It is concluded that, compared to the inductively coupled plasma, the microwave-induced plasma is highly non-thermal and remains in an ionizing mode in the analytical zone.     

Photodissociation of alkyl iodides in helium nanodroplets. II. Solvation dynamics

The solvation dynamics of nonthermal species in liquid helium has been investigated by photolyzing alkyl iodide molecules, CH3I, C2H5I, and CF3I, embedded in helium nanodroplets. Iodine and CH3 fragments are found to leave the droplets solvated by a finite number of helium atoms, this in contrast to C2H5 and CF3 fragments. The speed distributions of the IHeN and CH3HeN complexes show a prominent correlation with the degree of solvation N. It is argued that this correlation is caused by a dynamical adjustment of the solvation structure size to the relative speed of the traveling fragments as they pass through the helium bath. The absence of C2H5HeN and CF3HeN complexes is attributed to the large internal energy of these alkyl fragments which leads to a rapid destruction of any possibly formed complexes.     

Preliminary spectroscopic experiments with helium microwave induced plasma produced in air by use of a new structure: the axial injection torch

In this experimental study we have used spectroscopic methods to characterize helium plasma obtained by means of a novel waveguide-fed microwave plasma torch at atmospheric pressure, the axial injection torch. This device produces a “plasma flame” by coupling high frequency (HF) power at 2.45 GHz to the discharge. Various flame parameters (namely the electron density number and the electron and gas temperatures) have been determined by using spectroscopic diagnostic techniques that provided an estimate in terms of the helium flow rate, absorbed HF power and axial position in the experiments. These preliminary results suggest some departure from local thermodynamic equilibrium (LTE) and seem to indicate the utility of the discharge as an excitation source for emission spectroscopy. Comparison with other microwave torches already described in the literature is made in terms of the electron density and the electron and gas temperature.     

Nuclear reactivity indices in the context of spin polarized density functional theory

In this work, the nuclear reactivity indices of density functional theory have been generalized to the spin polarized case and their relationship to electron spin polarized indices has been established. In particular, the spin polarized version of the nuclear Fukui function has been proposed and a finite difference approximation has been used to evaluate it. Applications to a series of triatomic molecules demonstrate the ability of the new functions to predict the geometrical changes due to a change in the spin multiplicity. The main equations in the different ensembles have also been presented.     

Temperature behavior of the AlH3 polymorph by in situ investigation using high resolution Raman scattering

A Raman investigation of the AlH(3) polymorph has been carried out at a low temperature (20 K) under helium atmosphere (2 bar). The pristine material was composed of three polymorphs, namely, the α, β, and γ phases. The β phase has been removed by warming the sample to 70 °C, while further heating at 100 °C was used to remove the γ phase. This allowed us to evidence, on a purely experimental basis, the characteristic Raman spectrum for each phase. Raman spectra, for the three phases, have been also calculated using density functional theory, and the results have been compared to the present experimental data, allowing for a univocal assignment, to each phase, of its characteristic spectral features.     

Time-resolved optical emission spectroscopic measurements of He plasma induced by a high-power CO2 pulsed laser

Laser-induced breakdown spectroscopy of helium plasma, initially at room temperature and pressures ranging from 12 to 101 kPa was investigated using a transverse excitation atmospheric CO₂ pulsed laser (λ = 9.621 and 10.591 μm, a full width at half maximum of 64 ns, and an intensity from 1.5 to 5.36 GW cm⁻²). The helium breakdown spectrum is mainly due to electronic relaxation of excited He, He⁺ and H. Plasma characteristics were examined in detail on the emission lines of He and He⁺ by the time-integrated and time-resolved optical emission spectroscopy technique. Optical breakdown threshold intensities, ionization degree and plasma temperatures were obtained. An auxiliary metal mesh target was used to analyze the temporal evolution of the species in the plasma. The results show a faster decay of the continuum emission and He⁺ species than in the case of neutral He atoms. The velocity and kinetic energy distributions for He and He⁺ species were obtained from time-of-flight measurements. Electron density in the laser-induced plasma was estimated from the analysis of spectral data at various times from the laser pulse incidence. Temporal evolution of electron density has been used for the estimation of the three-body electron-ion recombination rate constant.