Hybrid materials of MCM-41 functionalized by lanthanide (Tb, Eu) complexes of modified meta-methylbenzoic acid: Covalently bonded assembly and photoluminescence

Novel organic-inorganic mesoporous hybrid materials were synthesized by linking lanthanide (Tb³⁺, Eu³⁺) complexes to the mesoporous MCM-41 through the modified meta-methylbenzoic acid (MMBA-Si) using co-condensation method in the presence of the cetyltrimethylammonium bromide (CTAB) surfactant as template. The luminescence properties of these resulting materials (denoted as Ln-MMBA-MCM-41, Ln=Tb, Eu) were characterized in detail, and the results reveal that luminescent mesoporous materials have high surface area, uniformity in the ordered mesoporous structure. Moreover, the mesoporous material covalently bonded Tb³⁺ complex (Tb-MMBA-MCM-41) exhibits the stronger characteristic emission of Tb³⁺ and longer lifetime than Eu-MMBA-MCM-41 due to the triplet state energy of organic legend MMBA-Si matches with the emissive energy level of Tb³⁺ very well.     

A rht-Type Luminescent Zn (II)-MOF Constructed by Triazine Hexacarboxylate Ligand: Tunable Luminescent Performance and White-light Emission Regulation through doping Eu3+/Tb3+

White-light emitting materials have become a hot research field of luminescent MOF (Metal–Organic Framework) because of its high practical application value. Herein, we successfully synthesized and characterized a rht-type fluorescent MOF Zn-TDPAT [H₆TDPAT = 2,4,6-tris(3,5-dicarboxylphenylamino)-1,3,5-triazine] with a topology of (3, 24) connected nodes. A series of MOFs materials x%Tb + y%Eu@Zn-TDPAT were prepared by incorporating different concentrations of green emission center Tb³⁺ and red emission center Eu³⁺ into the blue-emitting Zn-MOF. The luminescence properties of MOFs materials x%Tb + y%Eu@Zn-TDPAT can be effectively adjusted by incorporating different concentrations of Tb³⁺ and Eu³⁺ and can obtain multi-color luminescence properties from blue, blue-green, green, yellow green, yellow, blue-red, yellow-red and white. According to trichromatic mechanism, by reasonably matching the intensity of blue light, green light and red light emitted by x%Tb + y%Eu@Zn-TDPAT at 420, 543 and 616 nm, MOFs materials 0.75%Tb + 5%Eu@Zn-TDPAT, 0.65%Tb + 5.5%Eu@Zn-TDPAT and 0.5%Tb + 7.5%Eu@Zn-TDPAT with white-light emission are obtained. Their CIE coordinates are 0.3162, 0.3345 (0.3162, 0.3345), (0.3138, 0.3339) and (0.3329, 0.3222), respectively, which are very close to ideal white-light emission (0.3333,0.3333).     

Characterization and acidic properties of Al-SBA-15 materials prepared by post-synthesis alumination of a low-cost ordered mesoporous silica

A series of Al-containing SBA-15 type materials with different Si/Al ratio, were prepared by post-synthesis modification of a pure highly ordered mesoporous silica SBA-15 obtained by using sodium silicate as silica source, and amphiphilic block copolymer as structure-directing agent. A high level of aluminum incorporation was achieved, reaching an Si/Al ratio of up to 5.5, without any significant loss in the textural properties of SBA-15. These materials were fully characterized by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ²⁷Al NMR spectroscopy, and N₂ adsorption at 77 K. The acid properties of these materials have been evaluated by NH₃-TPD, adsorption of pyridine and deuterated acetonitrile coupled to FTIR spectroscopy. The effective acidity of these materials was evaluated using two catalytic reactions: 2-propanol dehydrogenation and 1-butene isomerization. The adsorption of basic probe molecules and the catalytic behavior revealed an evolution of the acid properties with the Al content. These studies have shown that the Al-SBA-15 materials contain Brønsted and Lewis acid sites with medium acidity which makes them appropriate to be used as acid catalysts in heterogeneous catalysis, catalytic supports, and adsorbents.     

硬模板法合成磁性石墨化介孔碳及在中药废水吸附处理中的应用

以SBA-15为模板, 蔗糖为碳源, 硝酸铁辅助催化合成磁性石墨化介孔碳复合材料(Fe/GMC). 利用X射线粉末衍射(XRD)、透射电子显微镜(TEM)、N₂吸附-脱附(BET)、拉曼光谱等对反应产物进行了表征. 硝酸铁辅助催化可以在较低碳化温度(900℃)下实现介孔碳的部分石墨化, 并同步生成磁性Fe₃O₄颗粒, 合成的产物比表面积大、孔道有序、磁性强. 运用紫外-可见(UV-Vis)光谱考察了该复合材料对中药红花色素废水的吸附特性,复合材料的吸附速率快、吸附量高, 具有良好的脱色效果并能实现吸附剂的快速固液磁分离.     

Hybrid materials of SBA-16 functionalized by rare earth (Eu, Tb) complexes of modified β-diketone (TTA and DBM): Covalently bonding assembly and photophysical properties

Novel mesoporous SBA-16 type of hybrids TTA-S16 and DBM-S16 were synthesized by co-condensation of modified β-diketone (TTA-Si and DBM-Si, DBM=1,3-diphenyl-1,3- propanepione, TTA=2-thenoyltrifluoroacetone) and tetraethoxysilane (TEOS) in the presence of Pluronic F127 as template, which were confirmed by FTIR, XRD, ²⁹Si CP-MAS NMR, and N₂ adsorption measurements. Novel organic-inorganic mesoporous luminescent hybrid containing RE³⁺ (Eu³⁺, Tb³⁺) complexes covalently attached to the functionalized ordered mesoporous SBA-16 (TTA-S16 and DBM-S16), which were designated as bpy-RE-TTA-S16 and bpy-RE-DBM-S16, were obtained by sol-gel process. The luminescence properties of these resulting materials were characterized in detail, and the results reveal that mesoporous hybrid material bpy-Eu-TTA-S16 present stronger luminescent intensities, longer lifetimes, and higher luminescent quantum efficiencies than the corresponding DBM-containing materials bpy-Eu-DBM-S16, while bpy-Tb-DBM-S16 exhibit the stronger characteristic emission of Tb³⁺ and longer lifetime than the corresponding TTA-containing materials bpy-Tb-TTA-S16.     

Mesoporous aluminum phosphite

High surface area pure mesoporous aluminum-phosphorus oxide-based derivatives have been synthesized through an S⁺I⁻ surfactant-assisted cooperative mechanism by means of a one-pot preparative procedure from aqueous solution and starting from aluminum atrane complexes and phosphoric and/or phosphorous acids. A soft chemical extraction procedure allows opening the pore system of the parent as-prepared materials by exchanging the surfactant without mesostructure collapse. The nature of the pore wall can be modulated from mesoporous aluminum phosphate (ALPO) up to total incorporation of phosphite entities (mesoporous aluminum phosphite), which results in a gradual evolution of the acidic properties of the final materials. While phosphate groups in ALPO act as network building blocks (bridging Al atoms), the phosphite entities become basically attached to the pore surface, what gives practically empty channels. The mesoporous nature of the final materials is confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption–desorption isotherms. The materials present regular unimodal pore systems whose order decreases as the phosphite content increases. NMR spectroscopic results confirm the incorporation of oxo-phosphorus entities to the framework of these materials and also provide us useful information concerning the mechanism through which they are formed.     

Single precursor-based luminescent nitrogen-doped carbon dots and their application for iron (III) sensing

Iron III (Fe³⁺) sensing is of great importance for monitoring its levels in different environmental and biological systems since its levels are tightly associated with many environmental concerns and serious diseases. Compared to the ordinary Fe³⁺ detection methods involving the sophisticated and expensive instruments, the use of fluorescent materials with short response time and low cost attracts much attention. Amongst a variety of fluorescent materials, a nitrogen-doped carbon dot (N-CD) is emerging as promising luminescent materials for biosensing due to their superior photoluminescent properties, good water solubility, and biocompatibility. Herein, N-CD prepared via a green and cost-effective one-pot hydrothermal method using a new single precursor N-(2-hydroxyethyl) ethylenediamine triacetic acid (HEDTA) as both the carbon and nitrogen sources is reported. The blue fluorescent emission of N-CDs is quenched by the addition of Fe³⁺, and the quenching intensity is concentration dependent in the wide range (0.76–400 μM) with a detection limit of 0.16 μM. The quantum yield for the as prepared N-CDs is 14.17%. The N-CDs also show a high selectivity for Fe³⁺ chelation amongst a range of biological metal ions. The fluorescent quenching is attributed to the formation of the coordinate covalent bonds between the Fe³⁺ and N-CDs, and the mechanism is proved to be a static type on the basis of the photoluminescence lifetime and the temperature-dependent fluorescent intensity change. Our eco-friendly and simple strategy will benefit the application of CDs in various fields.     

pH-dependent magnetic phase transition of iron oxide nanoparticles synthesized by gamma-radiation reduction method

In this study, the influence of pH variation on structural and magnetic phase transition of gamma radiolytic synthesized iron oxide nanoparticles is investigated. The structure and magnetic properties of irradiated samples are characterized using X-ray diffraction, Fourier transfer infrared spectroscopy, transmission electron microscopy, and vibrating sample magnetometer. It was found that, in acidic irradiated solution, Fe³⁺ ions make various complexes with polyvinyl alcohol and water molecules which exhibit a multiphase magnetic property as a mixture of dia and paramagnetic materials. On the other hand, in basic condition, rate of radiation induced reduction of Fe³⁺ ions increased which leads to the formation of superparamagnetic Fe₃O₄ nanoparticles. By increasing pH value, in strong basic condition, the tendency of paramagnetic iron (III) oxy-hydroxide formation was high compared to other phases. This variation in the magnetic properties was explained based on iron ions reduction mechanism and the variation of the ligands’ properties during formation of nanoparticles under irradiation.     

Study on the controllable synthesis of SH-MCM-41 mesoporous materials and their adsorption properties of the La3+, Gd3+ and Yb3+

Sulfhydryl MCM-41 (SH-MCM-41) mesoporous materials were prepared via a hydrothermal method, and -SH was successfully imported by a post-grafting method. The structure and surface properties of the materials were characterized using Fourier Transform infrared spectroscopy, X-ray diffraction and Transmission Electron Microscopy analysis. The low concentrations of La³⁺, Gd³⁺ and Yb³⁺ adsorption on the material were investigated. This paper discusses the effects of system factors, such as pH and the solid-liquid ratio, on the performance of the adsorption process. The adsorption thermodynamics and kinetics were also explored. Experimental results indicated that the materials were in good order and had high specific surface area (956 m²/g) with an average pore diameter of 2.1 nm; the mercapto groups were successfully grafted onto a molecular sieve, and the best grafted amount was 1.46 × 10^?3 mol/g. The materials showed preferable adsorption of La³⁺, Gd³⁺ and Yb³⁺ with maximum adsorption capacities of 560.56 mg/g, 467.60 mg/g and 540.68 mg/g, respectively. The adsorption process can be described by the Freundlich isotherm model, and the adsorption data fits pseudo-second-order kinetics. After repeating the elution-regeneration cycle four times, the adsorption capacity of rare earth ions was mostly maintained, indicating that the adsorbent can be regenerated well and recycled to save costs. It has potential in practical application.     

Direct synthesis of Nd3+ doped mesoporous TiO2 and investigation of its photocatalytic performance

Nd³⁺ doped mesoporous TiO₂ samples with different molar ratio of Nd/Ti were synthesized by a sol?Cgel method. The textural and optical properties of the samples were systematical characterized by X-ray diffraction, transmission electron microscopy, N₂ adsorption?Cdesorption isotherms, Fourier transform infrared spectroscopy and UV?CVisible absorbance spectroscopy. It was revealed that Nd³⁺ doping inhibited the phase transformation from anatase to rutile after calcination, and the mesoporous structure of doped samples was still retained with the increase of Nd/Ti molar ratio. The surface area of the samples varied from 137 to 210 m²g^?1 and the average pore size of them ranged between 5.7 and 8.2?nm. The photocatalytic activities of all the samples were evaluated by degradation methyl orange (MO) in aqueous solution as a model reaction under UV light irradiation. The results showed that the doped samples demonstrated a higher photocatalytic activity than the mesoporous TiO₂, and the 3?mol% Nd³⁺ doped mesoporous TiO₂ exhibited the best photocatalytic performance. Meanwhile, a promotion effect of the H₂O₂ added was verified in the degradation of MO.     

Multi-Responsive Sensor Based on Porous Hydrogen-Bonded Organic Frameworks for Selective Sensing of Ions and Dopamine Molecules

Hydrogen-bonded organic frameworks (HOFs), as an emerging porous material, have attracted increasing research interest in fluorescence sensing due to their inherent fluorescence emission units with unique physicochemical properties. Herein, based on the organic building block 3,3′,5,5′-tetrakis-(4-carboxyphenyl)-1,1′-biphenyl (H₄TCBP), the porous material HOF-TCBP was successfully synthesized using hydrogen bond self-assembly in a DMF solution. The fluorescence properties of the HOF-TCBP solution showed that when the concentration was high, excimers were easily formed, the PL emission was red-shifted, and the fluorescence intensity became weaker. HOF-TCBP showed good sensitivity and selectivity to metal ions Fe³⁺, Cr³⁺, and anion Cr₂O₇²⁻. In addition, HOF-TCBP can serve as a label-free fluorescent sensor material for the sensitive and selective detection of dopamine (DA). HOF-based DA sensing is actually easy, low-cost, simple to operate, and highly selective for many potential interfering substances, and it has been successfully applied to the detection of DA in biological samples with satisfactory recoveries (101.1–104.9%). To our knowledge, this is the first report of HOF materials for efficient detection of the neurotransmitter dopamine in biological fluids. In short, this work widely broadens the application of HOF materials as fluorescent sensors for the sensing of ions and biological disease markers.     

Mesoporous hybrids containing Eu complexes covalently bonded to SBA-15 functionalized: Assembly, characterization and photoluminescence

A novel series of luminescent mesoporous organic-inorganic hybrid materials has been prepared by linking Eu³⁺ complexes to the functionalized ordered mesoporous SBA-15 which was synthesis by a co-condensation process of 1,3-diphenyl-1,3-propanepione (DBM) modified by the coupling agent 3-(triethoxysilyl)-propyl isocyanate (TEPIC), tetraethoxysilane (TEOS), Pluronic P123 surfactant as a template. It was demonstrated that the efficient intramolecular energy transfer in the mesoporous material Eu(DBMSi-SBA-15)₃phen mainly occurred between the modified DBM (named as DBM-Si) and the central Eu³⁺ ion. So the Eu(DBMSi-SBA-15)₃phen showed characteristic emission of Eu³⁺ ion under UV irradiation with higher luminescence quantum efficiency. Moreover, the mesoporous hybrid materials exhibited excellent thermal stability as the lanthanide complex was covalently bonded to the mesoporous matrix.     

氮掺杂介孔碳的制备及其电化学超电容性能

通过直接炭化沸石咪唑酯骨架结构材料（ZIF-8）纳米多面体,成功制备了氮掺杂介孔碳（NMCs）. 采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、拉曼光谱、X射线光电子能谱（XPS）及比表面和孔隙度分析仪对其微观形貌和结构进行了表征,并对NMCs的电化学超电容性能进行了测试. 结果表明：NMCs具有规整的形貌、介孔纳米结构和较大比表面积（2737 m²·g^-1）;由于氮元素掺杂所赋予的优异的表面润湿性和赝电容性能,且介孔结构有利于电解质到达电极活性材料表面,NMCs表现出优异的电化学超电容性能,在1 A·g^-1的电流密度下,1.0 mol·L^-1H₂SO₄溶液中的比电容值为307 F·g^-1,并具有良好的功率特性;此外,在10A·g^-1的大电流密度下充放电循环5000次后,NMCs的比电容值保持率为96.9%.     

Controlled synthesis and characterization of LaPO4, LaPO4:Ce3+ and LaPO4:Ce3+, Tb3+ by EDTA assisted hydrothermal method

LaPO₄, LaPO₄:Ce³⁺ and LaPO₄:Ce³⁺, Tb³⁺ particles with different morphologies and sizes have been successfully synthesized via a simple EDTA assisted hydrothermal method. The effects of the doping components, pH value, and the chelating reagent on the phases, structures and morphologies were well investigated by means of X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Photoluminescent (PL) spectra and kinetic decays were used to characterize the fluorescent properties of the samples. The results reveal that all the samples are of high purity and assigned to the single-crystalline monoclinic structure of LaPO₄ phase. The aspects ratio of the nanostructures synthesized in acid synthetic condition is larger than those obtained in alkaline solution. Additionally, the Ce³⁺ or/and Tb³⁺ doped LaPO₄ particles show less smoother surface compared with pure LaPO₄. Furthermore, the tendency for anisotropic growth under hydrothermal conditions can be simply enhanced by selecting the chelating ligands (EDTA). The possible growth mechanism of the LaPO₄:Ln³⁺ (Ln = Ce³⁺, Tb³⁺) nanostructures has been proposed as well. Upon ultraviolet excitation, LaPO₄:Ce³⁺ and LaPO₄:Ce³⁺, Tb³⁺ phosphors show the characteristic 5d–4f emissions of Ce³⁺ and ⁵D₄–⁷F_j (j = 6–3) emission lines of Tb³⁺, respectively.     

Preparation and photoelectric properties of mesoporous ZnO films

Mesoporous ZnO films doped with Ti⁴⁺ (M-ZnO) have been prepared by doping process and sol–gel method. The films have mesoporous structures and consist of nano-crystalline phase, as evidenced from small angle X-ray diffraction and high resolution transmission electron microscopy. The wide angle X-ray diffraction of M-ZnO films confirms that M-ZnO has hexagonal wurtzite structure and ternary ZnTiO₃ phases. Ultraviolet–visible transmittance spectra, absorbance spectra and energy gaps of the films were measured. The Eg of M-ZnO is 3.25 eV. Photoluminescence intensity of M-ZnO centered at 380 nm increases obviously with the excitation power, which is due to the doping process and enhanced emission efficiency. M-ZnO thin films display a positive photovoltaic effect compared to mesoporous TiO₂ (M-TiO₂) films.     

Synthesis of europium-doped zinc oxide micro- and nanowires

Single crystalline Eu³⁺-doped wurtzite ZnO micro- and nanowires were synthesized by a chemical vapor deposition method (CVD). The nanostructures were grown by autocatalytic mechanism at walls of an alumina boat. The structure and properties of the doped ZnO is fully characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectrometry (EDX), scanning and transmission electron microscopy (SEM and TEM), and photoluminescence (PL) methods. The synthesis was carried out for 10 min giving vertically aligned nanowires with mean diameter of 50–400 nm and with length of up to several microns. The nanowires were grown along ±[0001] direction. The concentration of Eu³⁺ dopant in the synthesized nanowires was varied from 0.7 to 0.9 at %. The crystal structure and microstructures of the doped nanomaterials were discussed and compared with undoped ZnO. The photoluminescence spectra show that emission of doped samples were shifted towards orange-red region (2.02 eV) relative to undoped zinc oxide nanostructures (2.37 eV) due to Eu³⁺ intraionic transitions from ZnO/Eu.     

The enhancement mechanism of dielectric properties of Pb(Zr,Ti)O3 via (Mg2+,Sb3+) incorporation for supercapacitors

Due to the extraordinary versatility of the perovskite structure in accommodating different dopant ions in its structure, in recent years a huge number of multifunctional perovskite materials have been developed. In this work we aim to obtain high temperature-stable and huge dielectric constant materials for supercapacitors by doping divalent Mg²⁺ and trivalent Sb³⁺ ions into the octahedral sites, and divalent Sr²⁺ ions into the dodecahedral sites of lead zirconate-titanate perovskite. The resulting (Pb_0.95Sr_0.05)(Zr_0.425Ti_0.45Mg_0.042Sb_0.083)O_3-δ is examined by X-ray diffraction, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM), dielectric spectroscopy (DS) and resonance dielectric spectroscopy (RDS) in order to correlate composition, local structure, ion valence and chemical environment of the doped material with the dielectric properties. HRTEM evidences that a composite structure, with co-existent ferroelectric domains and relaxor nanodomains, is formed by doping. XPS shows that Sb³⁺ and Mg²⁺ substitute for the Ti⁴⁺/Zr⁴⁺ ions, pointing to these strong defects as the main cause for the appearance of the relaxor phase. DS and RDS found that the ferroelectric lead zirconate-titanate transforms into a re-entrant relaxor-ferroelectric composite with a huge dielectric constant of about 10⁴ which remains stable (within ±10%) in the high temperature range up to 250 °C, pointing to this mechanism of relaxor phase re-entrance below the normal ferroelectric phase transition, as being responsible for the enhancement.     

Atomic Insights into Aluminium-Ion Insertion in Defective Anatase for Batteries

Aluminium batteries constitute a safe and sustainable high-energy-density electrochemical energy-storage solution. Viable Al-ion batteries require suitable electrode materials that can readily intercalate high-charge Al³⁺ ions. Here, we investigate the Al³⁺ intercalation chemistry of anatase TiO₂ and how chemical modifications influence the accommodation of Al³⁺ ions. We use fluoride- and hydroxide-doping to generate high concentrations of titanium vacancies. The coexistence of these hetero-anions and titanium vacancies leads to a complex insertion mechanism, attributed to three distinct types of host sites: native interstitial sites, single vacancy sites, and paired vacancy sites. We demonstrate that Al³⁺ induces a strong local distortion within the modified TiO₂ structure, which affects the insertion properties of the neighbouring host sites. Overall, specific structural features induced by the intercalation of highly polarising Al³⁺ ions should be considered when designing new electrode materials for polyvalent batteries.     

三维介孔氨基三亚甲基膦酸锆的合成及其担载铁催化剂的甲醛催化氧化活性

以氧氯化锆和氨基三亚甲基膦酸(ATMP)为原料合成了一种新型介孔材料氨基三亚甲基膦酸锆(NTAZP)。使用XRD、FTIR、TG-DTA和SEM等手段对所合成的介孔材料进行了结构表征和形貌分析。然后以NTAZP为载体,用Fe(NO3)3水溶液处理,得到担载Fe3+的氨基三亚甲基膦酸锆。研究结果表明,Fe3+被吸附到载体孔道中后,NTAZP结构未被破坏,Fe3+离子与NTAZP孔壁骨架上的N发生了配位作用。铁担载NTAZP(NTAZP-Fe3+)对甲醛氧化具有良好的催化活性,催化反应条件温和,催化剂稳定性良好。以载体NTAZP担载铁还避免了Fe3+进入水体,催化剂得以回收利用,避免造成二次污染。NTAZP-Fe3+是一种高效绿色的新型小分子醛类化合物氧化催化剂。     

CaF2对CaO-CaF2-B2O3-SiO2：Sm2O3玻璃的光致发光增强效应

用高温熔融法制备了掺杂Sm₂O₃的CaO-CaF₂-B₂O₃-SiO₂(CFBS:Sm)发光玻璃材料, 并借助X射线衍射(XRD)谱、傅里叶变换红外(FTIR)光谱以及光致发光(PL)光谱等分析手段研究了玻璃基体中CaF₂的摩尔分数及其结构、红外透过性能以及荧光性能的关系. XRD和FTIR测试表明, 玻璃基体中引入CaF₂并未引起非晶结构的变化但其红外透过峰发生移动. 光谱学测试表明, CFBS:Sm发光玻璃在404 nm波长激发下出现对应于Sm³⁺离子位于566、603和650 nm的特征荧光峰, 其发光颜色为橙红色(x=0.531, y=0.371). 此外, 随着玻璃基体中CaF₂摩尔分数的增加, CFBS:Sm发光玻璃的荧光发射强度、荧光寿命(Sm³⁺的⁴G_5/2能级)和荧光量子效率也表现出增大的趋势. 这种CFBS:Sm发光玻璃中荧光发射强度和荧光寿命的提高主要是由于玻璃基体中的CaF₂替代CaO引起基体相互作用和声子能量降低、无辐射跃迁减弱造成的.