A low-temperature synthesis of ultraviolet-light-emitting ZnO nanotubes and tubular whiskers

We have successfully synthesized single-crystal ZnO nanotubes and tubular whiskers by employing Zn(NO₃)₂·6H₂O, NH₃·H₂O as the starting materials in the presence of polyethylene glycol (PEG, M_w=2000) at ambient pressure and low temperature (70 °C). Characterizations are carried out by X-ray powder diffraction (XRD), X-ray energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM, HRTEM) and photoluminescence (PL) measurement. The results show that the as-prepared ZnO are tubular textures, which have average cross-sectional dimensions of 200-300 nm, lengths of 2-3.5 μm, and wall thickness of 80 nm. These tubular products demonstrate a sharp ultraviolet excitonic emission peak centered at 385 nm at room temperature. A possible growth mechanism and the influence of the reaction temperature on the formation of crystalline ZnO are presented.     

Template-free polyoxometalate-assisted synthesis for ZnO hollow spheres

ZnO hollow spheres with diameters ranging from 400 to 600 nm and the thickness of shell approximate 80 nm were synthesized by a simple polyoxometalate-assisted solvothermal route without using any templates. The effect of polyoxometalate concentration, reaction time and temperature on the formation of the hollow spheres was investigated. The results indicated that the hollow spheres were composed of porous shells with nanoparticles and polyoxometalate play a key role in controlling morphology of ZnO. A possible growth mechanism based on polyoxometalate-assisted assembly and slow Ostwald ripening dissolution in ethanol solution is tentatively proposed. In addition, the room temperature photoluminescence spectrum showed that the ZnO hollow spheres exhibit exciting emission features with wide band covering nearly all the visible region.     

Microbundles of zinc oxide nanorods: Assembly in ionic liquid [EMIM][BF4], photoluminescence and photocatalytic properties

A simple, efficient and low-temperature approach for the assembly of hierarchical Zinc oxide (ZnO) microstructures in ionic liquid [EMIM]⁺[BF₄]⁻ is reported. The as-obtained ZnO superstructures are composed of microbundles of nanorods from the center points, with the diameter and length in the range of 100-150 nm and 2-4 μm, which have been characterized by X-ray diffraction, scanning and transmission electron microscopy, and photoluminescence spectroscopy. The ZnO microstructures exhibit significant defect-related green-yellow emission and high photodegradation of dye Methyl Orange (5×10⁻⁵ mol/L) under UV excitation within 80 min.     

Visual and trap emission spectrometric detections of Ag (I) ion with mesoporous ZnO/CdS@SiO2 core/shell nanocomposites

A new method for the preparation of mesoporous ZnO/CdS@SiO₂ core/shell nanostructure (CSN) has been developed. The mesoporous silica shells allow Ag⁺ to enter into the interior of the nanostructures to contact with ZnO/CdS core, accordingly causes the quenching of its band edge emission (475 nm) along with a simultaneous enhancement of red emission at around 595 nm. So, a novel visual fluorescence detection strategy for Ag⁺ ion is proposed based on a common core/shell Quantum dots nanostructure. Under optimal conditions, the enhanced fluorescence intensity at 595 nm increased linearly with the concentration of Ag⁺ ion ranging from 0.03 μM to 0.24 μM with a detection limit (3σ) of 3.3 nM.     

Growth mechanism and characterization of ZnO nano-tubes synthesized using the hydrothermal-etching method

ZnO nano-tubes (ZNTs) have been successfully synthesized via a simple hydrothermal-etching method, and characterized by X-ray diffraction, field emission scanning electron microscopy and room temperature photoluminescence measurement. The as-synthesized ZNTs have a diameter of 500 nm, wall thickness of 20–30 nm, and length of 5 μm. Intensity of the plane (0002) diffraction peak, compared with that of plane (10$ \bar 1 $ \bar 1 0) of ZNTs, is obviously lower than that of ZnO nano-rods. This phenomenon can be caused by the smaller cross section of plane (0002) of the nano-tubes compared with that of other morphologies. On basis of the morphological analysis, the formation process of nano-tubes can be proposed in two stages: hydrothermal growth and reaction etching process.     

Preparation, structure and ultraviolet photoluminescence of ZnO films by a novel chemical method

A novel and simple chemical method was developed for the deposition of ZnO films from aqueous solution, integrating the merits of successive ionic layer adsorption and reaction with the chemical bath deposition technology. By this new method, dense and continuous ZnO thin films with good crystallinity can be prepared in a very short time, e.g., in about 20 min. Results show that as-deposited ZnO films on glass and Si (1 0 0) exhibit hexagonal wurtzite crystalline structure and the preferential orientation along (0 0 2) plane. With a dense and continuous appearance, the film is composed of ZnO particles in even size of 200-300 nm. The strong and sharp emission at 391 nm and several weak emissions at the wavelength band of 440-500 nm indicate the high optical quality and the stoichiometrical nature of obtained film. Mechanism analysis shows that the reaction duration in hot water and the drying process are vital important factors affecting the deposition process and the crystallization behavior of the film prepared via the aqueous solution route.     

Structure-direct assembly of hexagonal pencil-like ZnO group whiskers

Hexagonal ZnO group whiskers synthesized from Zn(NH₃)₄²⁺ precursor at 145°C in a structure-directing template solvent (2.5% v/v alcohol) show strong photoluminescence at 409 and 420 nm. FE-SEM and TEM observation reveals that the ZnO group whiskers consist of uniform pencil-like whiskers with the diameter of around 1.5 μm and the length of up to 6 μm.     

A simple route to nanocrystalline silicon carbide

Nanocrystalline silicon carbide has been prepared via reacting magnesium silicide (Mg₂Si) with carbon tetrachloride (CCl₄) in an autoclave at 450-600°C. X-ray diffraction patterns of the products can be indexed as the cubic cell of SiC with the lattice constant, a=4.352 Å, in good agreement with a=4.349 Å (JCPDS card No. 75-0254). The transmission electron microscopy images show that the sample mainly consists of nanoparticles with an average size from 30 to 80 nm co-existing with a small fraction of nanorods and nanowires. Typically the nanorods range from 20 to 40 nm in diameter and the nanowires have diameters of 20 nm and lengths up to 10 μm. The Raman spectrum shows a characteristic sharp peak at 790 cm⁻¹. X-ray photoelectron spectra (XPS) gives an atomic ratio of Si to C as 1.08:1.00 from the quantification of the peak intensities. Photoluminescence spectrum reveals that the SiC sample emits ultraviolet light of 328 nm. A possible mechanism and the influence of temperature on the formation of crystalline SiC are proposed.     

Microwave plasma growth and high spatial resolution cathodoluminescent spectrum of tetrapod ZnO nanostructures

A novel microwave plasma assisted by tube furnace heating system is designed to grow tetrapod ZnO nanostructures. Under optimal reaction conditions, Zn powder is oxidated to form the tetrapod ZnO with straight and uniform four legs (nanorods), bearing diameters ranging from 10 to 25 nm and lengths up to 160 nm. High-resolution transmission electron microscopy analyses reveals that the tetrapod ZnO nanostructures are perfect crystalloid. High spatial resolution cathodoluminescent spectrum for individual tetrapod ZnO nanostructure shows only a strong ultraviolet emission at 385 nm.     

Detection of DNA damaging agents using layer-by-layer assembly

The layer-by-layer (LBL) electrostatic deposition method was used to fabricate multilayer films of pentaerythritol-based metallodendrimer with Ru^II terpyridine subunits (RuDen) that has a positive charge and ds-DNA (ds, double-stranded) that has a negative charge due to its phosphate backbone. Evidence of assembly was obtained by fabrication of (DNA | RuDen)_n on quartz treated with poly(diallyldimethylammonium chloride), PDDA. The absorbance at 263 nm varied linearly with n in the range 1-6. For electrochemical monitoring of damage by styrene oxide, the assembly was on a glassy carbon electrode that was coated with a monolayer of aminobenzoic acid. The measurement was based upon the RuDen-catalyzed oxidation of sites, e.g. guanine, that are exposed when ds-DNA is damaged. The peak current at 1.07 V versus Ag | AgCl in square wave voltammetry increases with incubation time for 30 min. The process was also monitored by the shift in the spectrum of a long period grating (LPG) fiber coated with (DNA | RuDen)₅. A typical shift, which is due to changes in the refractive index of the coating, was 0.3 and 1.8 nm for 5 and 30 min exposures, respectively, using an algorithm that can measure a shift of 10⁻⁴ nm.     

Low-temperature growth of ZnO nanoparticles: photocatalyst and acetone sensor

Well-crystalline ZnO nanoparticles (NPs) were synthesized in large-quantity via simple hydrothermal process using the aqueous mixtures of zinc chloride and ammonium hydroxide. The detailed structural properties were examined using X-ray diffraction pattern (XRD) and field emission scanning electron microscope (FESEM) which revealed that the synthesized NPs are well-crystalline and possessing wurtzite hexagonal phase. The NPs are almost spherical shape with the average diameters of ∼50 ± 10 nm. The quality and composition of the synthesized NPs were obtained using Fourier transform infrared (FTIR) and electron dispersed spectroscopy (EDS) which confirmed that the obtained NPs are pure ZnO and made with almost 1:1 stoichiometry of zinc and oxygen, respectively. The optical properties of ZnO NPs were investigated by UV-vis absorption spectroscopy. Synthesized ZnO NPs were extensively applied as a photocatalyst for the degradation of acridine orange (AO) and as a chemi-sensor for the electrochemical sensing of acetone in liquid phase. Almost complete degradation of AO has taken place after 80 min of irradiation time. The fabricated acetone sensor based on ZnO NPs exhibits good sensitivity (∼0.14065 μA cm⁻² mM⁻¹) with lower detection limit (0.068 ± 0.01 mM) in short response time (10 s).     

Heterogeneous nucleation for synthesis of sub-20 nm ZnO nanopods and their application to optical humidity sensing

We present a novel method for colloidal synthesis of one-dimensional ZnO nanopods by heterogeneous nucleation on zero-dimensional ZnO nanoparticle ‘seeds’. Ultra-small ZnO nanopods, multi-legged structures with sub-20 nm individual leg diameters, can be synthesized by hydrolysis of a Zn2+ precursor growth solution in presence of ∼4 nm ZnO seeds under hydrothermal conditions via microwave-assisted heating in as little as 20 min of reaction time. One-dimensional ZnO nanorods are initially generated in the reaction mixture by heterogeneous nucleation and growth along the [0001] direction of the ZnO crystal. Growth of one-dimensional nanorods subsequently yields to an ‘attachment’ and size-focusing phase where individual nanorods fuse together to form multi-legged nanopods having diameters ∼15 nm. ZnO nanopods exhibit broad orange-red defect-related photoluminescence in addition to a near-band edge emission at 373 nm when excited above the band-gap at 350 nm. The defect-related photoluminescence of the ZnO nanopods has been applied towards reversible optical humidity sensing at room temperature. The sensors demonstrated a linear response between 22% and 70% relative humidity with a 0.4% increase in optical intensity per % change in relative humidity. Due to their ultra-small dimensions, ZnO nanopods exhibit a large dynamic range and enhanced sensitivity to changes in ambient humidity, thus showcasing their ability as a platform for optical environmental sensing.     

The effects of urea and n-propanol on collagen denaturation: using DSC, circular dicroism and viscosity

The effect of urea and n-propanol on circular dichroism (CD) and viscosity of purified type1 collagen solution at various temperatures and differential scanning calorimetry (DSC) of rat-tail tendon (RTT) collagen fibre have been studied. CD reveals a spectrum with a positive peak at around 220 nm and a negative peak at 200 nm characteristics of collagen triple helix. The molar ellipticity decreases as the concentration of urea increases up to particular concentration (collagen solution treated with 265 μM of urea) and after that it increases (collagen solution treated with 500 μM of urea). There is a linear decrease in molar ellipticity as the concentration of n-propanol increases. Denaturation temperature of urea and n-propanol treated with purified collagen solution has been studied using viscosity method. Additives such as urea and n-propanol decrease the thermal stability of collagen triple helix in solution and in RTT collagen fibre. Thermal helix to coil transition of urea and n-propanol treated collagen depends on the degree of hydration and the concentration of these additives. Thermodynamic parameters such as the peak temperature, enthalpy of activation, and energy of activation for collagen-gelatin transition for native, urea and n-propanol treated RTT collagen fibre has been calculated using DSC. The change in the thermodynamic parameters has been observed for native, urea and n-propanol treated RTT collagen fibres. The experimental results show that the change in the water structure, dehydration and desolvation induced by different additives such as urea and n-propanol on RTT may vary with the type of denaturation.     

The effects of ZnGa2O4 formation on structural and optical properties of ZnO:Ga powders

Gallium-doped zinc oxide (ZnO:Ga 1, 2, 3, 4 and 5 at%) samples were prepared in powder form by modifying the Pechini method. The formation of zinc gallate (ZnGa₂O₄) with the spinel crystal structure was observed even in ZnO:Ga 1 at% by X-ray diffraction. The presence of ZnGa₂O₄ in ZnO:Ga samples was also evidenced by luminescence spectroscopy through its blue emission at 430 nm, assigned to charge transfer between Ga³⁺ at regular octahedral symmetry and its surrounding O²⁻ ions. The amount of ZnGa₂O₄ increases as the dopant concentration increases, as observed by the quantitative phase analysis by the Rietveld method.     

Room temperature ferromagnetism in undoped and Fe doped ZnO nanorods: Microwave-assisted synthesis

One-dimensional (1D) undoped and Fe doped ZnO nanorods of average length ∼1 μm and diameter ∼50 nm have been obtained using a microwave-assisted synthesis. The magnetization (M) and coercivity (H_c) value obtained for undoped ZnO nanorods at room temperature is ∼5×10⁻³ emu/g and ∼150 Oe, respectively. The Fe doped ZnO samples show significant changes in M -H loop with increasing doping concentration. Both undoped and Fe doped ZnO nanorods exhibit a Curie transition temperature (T_c) above 390 K. Electron spin resonance and Mössbauer spectra indicate the presence of ferric ions. The origin of ferromagnetism in undoped ZnO nanorods is attributed to localized electron spin moments resulting from surface defects/vacancies, where as in Fe doped samples is explained by F center exchange mechanism.     

Synthesis and characteristic of the Fe3O4@SiO2@Eu(DBM)3·2H2O/SiO2 luminomagnetic microspheres with core-shell structure

The core-shell structured luminomagnetic microsphere composed of a Fe₃O₄ magnetic core and a continuous SiO₂ nanoshell doped with Eu(DBM)₃·2H₂O fluorescent molecules was fabricated by a modified Stöber method combined with a layer-by-layer assembly technique. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), confocal microscopy, photoluminescence (PL), and superconducting quantum interface device (SQUID) were employed to characterize the Fe₃O₄@SiO₂@Eu(DBM)₃·2H₂O/SiO₂ microspheres. The experimental results show that the microshpere has a typical diameter of ca. 500 nm consisting of the magnetic core with about 340 nm in diameter and silica shell doped with europium complex with an average thickness of about 80 nm. It possesses magnetism with a saturation magnetization of 25.84 emu/g and negligible coercivity and remanence at room temperature and exhibits strong red emission peak originating from electric-dipole transition ⁵D₀ → ⁷F₂ (611 nm) of Eu³⁺ ions. The luminomagnetic microspheres can be uptaken by HeLa cells and there is no adverse cell reaction. These results suggest that the luminomagnetic microspheres with magnetic resonance response and fluorescence probe property may be useful in biomedical imaging and diagnostic applications.     

Preparation and photoluminescence properties of RE:Na3La9O3(BO3)8 (RE=Er, Yb) crystals

Using Na₂CO₃-H₃BO₃-NaF as fluxes, transparent RE:Na₃La₉O₃(BO₃)₈ (abbr. RE:NLBO, RE=Er, Yb) crystals have been grown by the top seed solution growth (TSSG) method. The X-ray powder diffraction analysis shows that the RE:NLBO crystals have the same structure with NLBO. The element contents were determined by molar to be 0.64% Er³⁺ in Er:NLBO, 2.70% Yb³⁺ in Yb:NLBO, respectively. The polarized absorption spectra of RE:NLBO have been measured at room temperature and show that both Er:NLBO and Yb:NLBO have a strong absorption bands near 980 nm with wide FWHM (Full Wave at Half Maximum) (21 nm for Er:NLBO and 25 nm for Yb:NLBO). Fluorescence spectra have been recorded. Yb:NLBO has the emission peaks at 985 nm, 1028 nm and 1079 nm and the emission peak of Er:NLBO is at 1536 nm. Spectral parameters have been calculated by the Judd-Ofelt theory for Er:NLBO and the reciprocity method for Yb:NLBO, respectively. The calculated values show that Er:NLBO is a candidate of 1.55 μm laser crystals and Yb:NLBO is a candidate for self-frequency doubling crystal.     

Synthesis and suspension rheology of titania nanoparticles grafted with zwitterionic polymer brushes

Thin films of polydimethylsiloxane (PDMS) and ZnO quantum dots (QDs) were built up as multilayers by spin-coating. The films are characterized by a UV-blocking ability that increases with increasing number of bilayers. Photoluminescence (PL) emission spectra of the thin films occur at 522 nm, which is the PL wavelength of the ZnO QDs dispersion, but with a lower intensity and a quantum yield (QY) less than 1% that of the dispersion. Cross-linking has introduced new features to the absorption spectra in that the absorption peak was absent. These changes were attributed to the morphological and structural changes revealed by transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR), respectively. TEM showed that the ZnO particle size in the film increased from 7 (±2.7) nm to 16 (±7.8) upon cross-linking. The FTIR spectra suggest that ZnO QDs are involved in the cross-linking of PDMS and that the surface of the ZnO QDs has been chemically modified.     

Needle-like calcium carbonate assisted self-assembly of mesostructured hollow silica nanotubes

Mesostructured hollow silica nanotubes (MHSNTs) were successfully produced via the self-assembly of C₁₆TMABr and silica species on the surface of needle-like calcium carbonate nanoparticles in an alkaline medium at room temperature. The characterization of MHSNTs by transmission electron microscopy (TEM), scanning electron microscopy (SEM), pore size distribution (PSD) and Brunauer-Emmett-Teller (BET) indicated that MHSNTs had uniform tubular hollow structures with big openings, a length of 1.5-2.0 μm, an inner diameter of 150-200 nm at the open end and 50-60 nm at the closed end, and a wall thickness of 20-30 nm, as well as a narrow PSD around 2.3 nm in the shells and a BET surface area as high as ∼975.3 m²/g. By small-angle X-ray diffraction (XRD), BET and pore structure analysis, it was found that more uniformly structured mesopores could be formed by the method of removing the double templates simultaneously through a solvent extraction process, as compared to the separate removal of the double templates by calcinating and then etching in an acidic solution, and the amount of C₁₆TMABr affected the mesoporous structures of MHSNTs greatly. The formation processes of MHSNTs were also studied with XRD and FTIR.     

Hydrothermal synthesis of nanocrystalline ZnSe: An in situ synchrotron radiation X-ray powder diffraction study

The hydrothermal synthesis of nanocrystalline ZnSe has been studied by in situ X-ray powder diffraction using synchrotron radiation. The formation of ZnSe was studied using the following starting mixtures: Zn+Se+H₂O (route A) and ZnCl₂+Se+H₂O+Na₂SO₃ (route B). The route A experiment showed that Zn powder starts reacting with water at 134 °C giving ZnO and H₂ followed by the formation of ZnSe which takes place in temperature range from 167 to 195 °C. The route B experiment shows a considerably more complex reaction path with several intermediate phases and in this case the formation of ZnSe starts at 141 °C and ZnSe and Se were the only crystalline phases observed at the end of the experiment where the temperature was 195 °C. The sizes of the nanocrystalline particles were determined to 18 and 9 nm in the route A and B experiments, respectively. Nanocrystalline ZnSe was also synthesized ex situ using the route A and B methods and characterized by conventional X-ray powder diffraction and transmission electron microscopy. An average crystalline domain size of ca. 8 nm was determined by X-ray powder diffraction in fair agreement with TEM images, which showed larger aggregates of nanoparticles having approximate diameters of 10 nm. Furthermore, a method for purification of the ZnSe nanoparticles was developed and the prepared particles showed signs of anisotropic size broadening of the diffraction peaks.