Size-controllable synthesis of monodispersed colloidal silica nanoparticles via hydrolysis of elemental silicon

A new method is presented for preparing monodisperse and uniform-size silica nanoparticles using a two-stage hydrolysis of silicon powder in aqueous medium. The influence of synthesis conditions including solution composition and temperature on the formation of silica nanoparticles were systematically investigated. The structure and morphology of the silica particles were characterized via transmission electron microscopy (TEM) and dynamic light scattering (DLS). Various-sized particles in the range 10–100 nm were synthesized. The size of the nanoparticles can be precisely controlled by using a facile regrowth procedure in the same reaction media.     

过渡金属钼钒砷酸盐纳米微粒的固相合成与表征

采用室温固相反应法合成了通式为H3MAsMo10V2O40·xH2O(M=Co2+、Ni2+、Cu2+、Zn2+)的四种过渡金属钼钒砷酸盐纳米微粒。通过元素分析、IR、UV、XRD、TEM、TG DTA、TPR等测试手段对其组成、结构、颗粒大小、热稳定性以及表面性能进行了表征。结果表明:四种多金属氧酸盐均为Keggin结构的纳米微粒,晶粒大小约为25～36nm,形成纳米微粒后,表现出明显量子尺寸效应,热稳定性下降,表面活性增大。     

Functionalization of silicon nanoparticles via hydrosilylation with 1-alkenes

Studies focusing on the functionalization of the surface of free silicon nanoparticles are presented. This functionalization is applied to hydrogen-terminated silicon nanoparticles to evaluate how far the well-known solution-phase chemistry of thermal-, radical-, Lewis acid- and UV light-mediated hydrosilylation can be applied to the surface chemistry of silicon nanoparticles. The efficiencies of hydrosilylation for thermal-, radical- and Lewis acid-mediated reactions on silicon nanoparticles surfaces, deduced from the intensity of the ν(Si–H) absorption, are found to be comparable.     

水分散性硫化镉纳米粒子的制备研究进展

表面修饰的硫化镉纳米粒子荧光性能优异而稳定,激发光谱宽,发射光谱窄而对称且发射波长可通过改变材料的粒径大小和组成来调控,因而在生物样本尤其是活组织的多色成像中极为有用,能有效避免因样本自身发光和光散射导致的信号干扰。硫化镉纳米粒子的研究已被许多科研工作者所青睐,是目前热点研究领域之一。近年来,水分散性硫化镉纳米粒子作生物荧光标记物的研究取得了长足的进展。本文综述了水分散性硫化镉纳米粒子的制备方法研究进展,分析了各种制备方法的优点与不足之处。     

Dispersing and stabilizing silicon nanoparticles in a low-epsilon medium

One possible approach to prevent the oxidation of silicon nanoparticles during a dispersing process is to use a dispersing medium, which does not contain any oxygen atoms in its structure, e.g. toluene. However, dispersing nanoparticles in such a non-polar organic medium is a major challenge, because the particles tend to aggregate very easily. The attempt of wet-grinding non-stabilized SiNP in toluene with a stirred media mill results in μm-sized aggregates that precipitate rapidly. In order to achieve stable suspensions with regard to aggregation a suitable additive, added during the process of dispersion, is necessary. The stabilizing efficiency of several different additives, mostly oligo- and polymeric compounds, was evaluated by investigating the aggregate formation via dynamic light scattering, complemented by scanning electron micrographs. This work demonstrates that the stability of the particulate system and therefore the formation of aggregates can be adjusted selectively by the choice of the additive towards well-dispersed or densified particles. The attachment of the additives upon the surface of the SiNP was examined by diffuse reflectance infrared Fourier transform spectroscopy and the surface coverage was quantified by a combination of thermogravimetric analysis and gas sorption experiments.     

White fluorescence from core-shell silica nanoparticles

Into the white: Encapsulation of a naphthalimide moiety in the core of silica nanoparticles afforded nanospheres with a strong green excimeric emission. Together with the blue emission of the monomeric naphthalimide and the yellow fluorescence of the tetrazine acceptor on the outer shell, the added contributions provide intense white fluorescence upon 330?nm UV excitation.     

Effect of silica nanoparticles on solid state polymerization of poly(ethylene terephthalate)

In the present study, the effect of silica nanoparticles, on the solid state polycondensation (SSP) kinetics of poly(ethylene terephthalate) (PET) is thoroughly investigated. At silica concentrations less than 1 wt% and reaction temperatures between 200 and 230 °C higher intrinsic viscosity (IV) values were measured, compared to neat PET at all reaction times. However, with 1 wt% of nanosilica (n-SiO₂), the IV increase of the nanocomposites was similar to that of neat PET and a further increase to 5 wt% n-SiO₂ resulted in significantly lower IV values. A simple kinetic model was also employed to predict the time evolution of IV, as well as the carboxyl and hydroxyl content during SSP. The kinetic parameters of the transesterification and esterification reactions were estimated at different temperatures with or without the addition of n-SiO₂. The activation energies of both reactions were determined together with the concentration of inactive end-groups. From the experimental measurements and the theoretical simulation results it was proved that n-SiO₂ in small amounts (less than 1 wt%) enhances both the esterification and transesterification reactions at all studied temperatures acting as a co-catalyst. However, as the amount of nanosilica increases a number of inactive hydroxyl groups were estimated corresponding to participation of these groups in side reactions with the nanosilica particles. These side reactions lead initially to branched PET chains and eventually (5 wt% n-SiO₂ concentration) to crosslinked structures.     

Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles

This study describes a facile and versatile method for preparing polymer-encapsulated silica particles by ‘grafting from’ polymerization initiated by a redox system comprising ceric ion (Ce⁴⁺) as an oxidant and an organic reductant immobilized on the surface of silica nanoparticles. The silica nanoparticles were firstly modified by 3-aminopropyltriethoxysilane, then reacted with poly(ethylene glycol) acrylate through the Michael addition reaction, so that hydroxyl-terminated poly(ethylene glycol) (PEG) were covalently attached onto the nanoparticle surface and worked as the reductant. Poly(methyl methacrylate) (PMMA), a common hydrophobic polymer, and poly(N-isopropylacrylamide) (PNIPAAm), a thermosensitive polymer, were successfully grafted onto the surface of silica nanoparticles by ‘grafting from’ polymerization initiated by the redox reaction of Ce⁴⁺ with PEG on the silica surface in acid aqueous solutions. The polymer-encapsulated silica nanoparticles (referred to as silica@PMMA and silica@PNIPAAm, respectively) were characterized by infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. On the contrary, graft polymerization did not occur on bare silica nanoparticles. In addition, during polymerization, sediments were observed for PMMA and for PNIPAAm at a polymerization temperature above its low critical solution temperature (LCST). But the silica@PNIPAAm particles obtained at a polymerization temperature below the LCST can suspend stably in water throughout the polymerization process.     

Microwave-induced synthesis of highly dispersed gold nanoparticles within the pore channels of mesoporous silica

Highly dispersed gold nanoparticles have been incorporated into the pore channels of SBA-15 mesoporous silica through a newly developed strategy assisted by microwave radiation (MR). The sizes of gold are effectively controlled attributed to the rapid and homogeneous nucleation, simultaneous propagation and termination of gold precursor by MR. Diol moieties with high dielectric and dielectric loss constants, and hence a high microwave activation, were firstly introduced to the pore channels of SBA-15 by a simple addition reaction between amino group and glycidiol and subsequently served as the reduction centers for gold nanoparticles. Extraction of the entrapped gold from the nanocomposite resulted in milligram quantities of gold nanoparticles with low dispersity. The successful assembly process of diol groups and formation of gold nanoparticles were monitored and tracked by solid-state NMR and UV-vis measurements. Characterization by small angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the incorporation of gold nanoparticles would not breakup the structural integrity and long-range periodicity of SBA-15. The gold nanoparticles had a narrow size distribution with diameters in the size range of 5-10 nm through TEM observation. The average particles size is 7.9 nm via calculation by the Scherrer formula and TEM measurements. Nitrogen adsorption and desorption isotherms gave further evidence that the employed method was efficient and gold nanoparticles were successfully incorporated into the pore channels of SBA-15.     

Experimental and theoretical studies of the optimisation of fluorescence from near-infrared dye-doped silica nanoparticles

There is substantial interest in the development of near-infrared dye-doped nanoparticles (NPs) for a range of applications including immunocytochemistry, immunosorbent assays, flow cytometry, and DNA/protein microarray analysis. The main motivation for this work is the significant increase in NP fluorescence that may be obtained compared with a single dye label, for example Cy5. Dye-doped NPs were synthesised and a reduction in fluorescence as a function of dye concentration was correlated with the occurrence of homo-Förster resonance energy transfer (HFRET) in the NP. Using standard analytical expressions describing HFRET, we modelled the fluorescence of NPs as a function of dye loading. The results confirmed the occurrence of HFRET which arises from the small Stokes shift of near-infrared dyes and provided a simple method for predicting the optimum dye loading in NPs for maximum fluorescence. We used the inverse micelle method to prepare monodispersed silica NPs. The NPs were characterised using dynamic light scattering, UV spectroscopy, and transmission electron microscopy (TEM). The quantum efficiency of the dye inside the NPs, as a function of dye loading, was also determined. The fluorescent NPs were measured to be approximately 165 times brighter than the free dye, at an optimal loading of 2% (w/w). These experimental results were in good agreement with model predictions.

Open image in new window

Figure The change in nanoparticle fluorescence versus increased dye loading modelled using homo-Förster resonance energy transfer.

     

Facile one-pot synthesis of PEGylated monodisperse mesoporous silica nanoparticles with controllable particle sizes

In this work, we describe the one-pot synthesis of PEGylated mesoporous silica nanoparticles （MSNs） with uniform shape, tunable sizes, and narrow size distributions. The size of these nanoparticles can be controlled from 49 nm to 98 nm by simply varying the concentration oftriethanolamine during the base- catalyzed sol-gel reaction. Particles were characterized by transmission electron microscopy, dynamic light scattering, Fourier transform infrared spectrometry, thermogravimetric analysis, and nitrogen adsorption-desorption measurements. These PEGylated MSNs exhibited excellent long-term stability in biological media, which ensures their potential applications in drug delivery.     

Microwave-assisted synthesis of biofunctional and fluorescent silicon nanoparticles using proteins as hydrophilic ligands

Protective shell: A microwave-assisted method allows rapid production of biofunctional and fluorescent silicon nanoparticles (SiNPs), which can be used for cell labeling. Such SiNPs feature excellent aqueous dispersibility, are strongly fluorescent, storable, photostable, stable at different pH values, and biocompatible. The method opens new avenues for designing multifunctional SiNPs and related silicon nanostructures.     

Improvement in the light conversion efficiency of silicon solar cell by spin coating of CuO,ZnO nanoparticles and CuO/ZnO mixed metal nanocomposite material

Synthesis of pure Zinc oxide (ZnO), Copper oxide (CuO) nanoparticles (NPs) and their (ZnO/CuO) nanocomposites (NCs) in 1:1 M ratio were successfully prepared by co-precipitation method. The structural properties of the as synthesized nanoparticles and nanocomposite materials were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) techniques. Optical band-gap studies were done using UV–Visible absorption spectroscopy. Photovoltaic properties of pure ZnO NPs, CuO NPs and ZnO/CuO NCs coated over a single-crystalline silicon solar cell were carried out to compare improvement of light-conversion efficiency in coated solar cell. The maximum light conversion efficiencies were found to be of 8.02% for CuO (3 mg/ml concentration) and 7.28% for ZnO NPs (3 mg/ml concentration), whereas that of mixed metal nanocomposite CuO/ZnO NCs was found to be 7.62%. at very low concentration of 1 mg/ml. This indicates with low concentration of mixed metal NCs an improvement in light efficiency can be obtained. The enhancement in efficiency could be due to formation of p - n heterojunction by CuO/ZnO NCs composites which enhances the number of electrons and holes participating in conduction on the surface.     

Rapid one-step synthesis, characterization and functionalization of silica coated gold nanoparticles

This paper describes a rapid, simple and one-step method for preparing silica coated gold (Au@SiO₂) nanoparticles with fine tunable silica shell thickness and surface functionalization of the prepared particles with different groups. Monodispersed Au nanoparticles with a mean particle size of 16 nm were prepared by citrate reduction method. Silica coating was carried out by mixing the as prepared Au solution, tetraethoxysilane (TEOS) and ammonia followed by microwave (MW) irradiation. Although there are several ways of coating Au nanoparticles with silica in the literature, each of these needs pre-coating step as well as long reaction duration. The present method is especially useful for giving the opportunity to cover the colloidal Au particles with uniform silica shell within very short time and forgoes the use of a silane coupling agent or pre-coating step before silica coating. Au@SiO₂ nanoparticles with wide range of silica shell thickness (5-105 nm) were prepared within 5 min of MW irradiation by changing the concentration of TEOS only. The size uniformity and monodispersity were found to be better compared to the particles prepared by conventional methods, which were confirmed by dynamic light scattering and transmission electron microscopic techniques. The prepared Au@SiO₂ nanoparticles were further functionalized with amino, carboxylate, alkyl groups to facilitate the rapid translation of the nanoparticles to a wide range of end applications. The functional groups were identified by XPS, and zeta potential measurements.     

Enzyme-modified nanoparticles using biomimetically synthesized silica

The entrapment of enzymes within biomimetic silica nanoparticles offers unique and simple immobilization protocols that merge the stability of proteins confined in solid phases with the high loading and reduced diffusion limitations inherent to nano-sized structures. Herein, we report on the biomimetic silica entrapment of chemically derivatized horseradish peroxidase for amperometric sensing applications. Scanning electron microscopy shows evidence of the formation of enzyme-modified nanospheres using poly(ethylenimine) as a template for silicic acid condensation. When these nanospheres are directly deposited on graphite electrodes, chemically modified anionic peroxidase shows direct electron transfer at 0 mV vs Ag|AgCl. Microgravimetric measurements as well as SEM images demonstrate that negatively charged peroxidase is also entrapped when silica precipitates at gold electrodes are modified with a self-assembled monolayer of poly(ethylenimine). Electrostatic interactions may play a crucial role for efficient enzyme entrapment and silica condensation at the PEI template monolayer. The in-situ biomimetically synthesized peroxidase nanospheres are catalytically active, enabling direct bioelectrocatalysis at 0 mV vs Ag|AgCl with long-term stability.     

Functionalisation of mesoporous silica nanoparticles with 3-isocynatopropyltrichlorosilane

The functionalisation of Mesoporous Silica Nanoparticles (MSN) with the isocyanate group was carried out. The excellent reactivity of 3-isocynanatopropyltrichlorosilane allowed its grafting on the surface of MSN in mild conditions. Further reaction with different nucleophiles bearing primary amino groups led to the formation of a urea linkage and thus the covalent grafting of the nucleophiles to the MSN surface.     

Raman spectroscopic study on boron-doped silicon nanoparticles

Raman analyses were performed on thin films prepared from B-doped Si nanoparticles with an average diameter of 15 nm using the spin-coating method. The resulting spectrum exhibited a broad band with a peak near 520 cm⁻¹. The band was decomposed into three bands corresponding to the crystalline, grain boundary (GB), and amorphous regions by the least-squares band-fitting method based on the three Voigt bands. The fractions of the crystalline, GB, and amorphous regions were 37%, 35%, and 28%, respectively. A spherical particle exhibited an ordered crystalline core surrounded by a disordered shell in a transmission electron microscope (TEM) image. The crystalline fraction of the 15-nm B-doped Si nanoparticle film was much lower than that of the 19-nm P-doped Si nanoparticle film. This result suggested that the B-doping mechanism was different from that of P-doping. The temperature of the sample was estimated from the ratio of the peak intensities of anti-Stokes to Stokes Raman bands (I^AS/I^S) observed near 520 cm⁻¹. The temperature of the B-doped Si nanoparticle film upon irradiation at a power density of 4.6 kW/cm² was 298 °C, whereas the temperature of the P-doped Si nanoparticle film was 92 °C. The B-doped Si nanoparticle films were capable of producing light-induced heat.     

Emulsion polymerization of ethylene from mesoporous silica nanoparticles with vinyl functionalized monolayers

Emulsion polymerization of ethylene from vinyl functionalized mesoporous silica nanoparticles (V‐MSNs) was reported. V‐MSNs were synthesized via deposition of vinyl monolayers on the pore walls, and the relative surface coverage of the vinyl monolayers was 74%. A fluorinated P‐O‐chelated nickel catalyst coordinated to the vinyl groups. These V‐MSNs hosting catalysts were full dispersed in water assisted by ultrasonic processor in the presence of surfactants. After addition of ethylene, polyethylene (PE) chains grew from the pores of V‐MSNs, formation of stable nanocomposite latices with solid content up to 17.3%. Our method made V‐MSNs well‐dispersed in the PE matrix. Especially, because of a strong interaction between PE and nanoparticles, a stable V‐MSNs core/PE shell structure was formed upon thermal treatment above melting temperature of the PE. Samples were analyzed by a number of techniques including TEM, N₂ adsorption‐desorption, FTIR, and solid state ²⁹Si NMR, DLS, ¹H NMR, GPC, and DSC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1393–1402, 2009     

Structural properties of palladium nanoparticles embedded in inverse microemulsions

Pd nanoparticles were synthesized by reduction of palladium acetate by ethanol in systems containing tetrahydrofuran (THF) as dispersion medium and tetradodecylammonium bromide (TDABr) surfactant as stabilizer. The polar phase (ethanol) acts at the same time as reducing agent. THF/TDABr/H₂O inverse microemulsions containing micelles of various sizes were also prepared, and the structure of complex liquids was studied by density measurements. Sols containing nanosize Pd⁰ particles were synthesized within the water droplets of this micellar system. The stabilized Pd⁰/surfactant system was characterized by density measurements, absorption spectroscopy, and transmission electron microscopy. The stabilizing surfactant layer adsorbed on the liquid/liquid interface and on the surface of the nanoparticles (i.e., the liquid/solid interface) significantly reduced the excess volume for the palladium nanodispersion in organic solvent. Received: 17 July 2000 Accepted: 5 October 2000     

Amorphous silicon from low-temperature reduction of silica in the molten salts and its lithium-storage performance

Amorphous silicon(a-Si) is one of the most promising anode-materials for the lithium-ion battery owing to its large capacity and superior fracture resistance.However,a-Si is usually fabricated with the sophisticated chemical vapor deposition or pulse laser deposition in a limited scale.In this work,we have succes s fully pre pared a-Si spheres(～200 nm) by reducing the TiO_2-coated silica spheres with Al powders in the molten salts at 300℃.The coated TiO_2 layer acts as a protective layer for structural maintenance during the reduction and a precursor for doping.The doped Ti element may suppress the crystal growth of Si to facilitate the formation of a-Si.The observation with in-situ transmission electron microscopy(TEM) further reveals that lithiation kinetics of the synthesized a-Si is controlled by the interfacial reaction.The Li+diffusivity in a-Si determined from the observation is in the order of 10 ~(14) cm~2/s.The anode of a-Si spheres together with crystalline Si nanoparticles exhibits excellent electrochemical performance,delivering a reversible capacity of 1604 mAh/g at 4 A/g and a capacity retention of 78,3%after 500 cycles.The low temperature reduction process reported in this study provides a low-cost method to fabricate a-Si nanostructures as high-capacity durable anode materials