Vibration analysis of a beam with PCLD Patch

An analytical approach for vibration response analysis of a beam with single passive constrained layer damping (PCLD) patch is presented. The governing equation of motion of the beam is firstly derived on the basis of an energy approach and the Lagrange equation. The noval contribution is that a third admissible function is introduced to represent the longitudinal displacements of the constraining layer in the PCLD patch when the assumed-modes method is applied for discretizing the governing equation. In conventional analytical approaches, only two admissible functions are used together with a longitudinal static equilibrium equation of a section of base beam or constraining layer. Comparison of the computational results from the proposed analytical approach and the conventional analytical approach as well as a commercial FEM code reveals that the proposed analytical approach can describe the vibration responses of the damped beam more accurately for commonly used viscoelastic material (VEM) layer in the PCLD patch while the conventional analytical approach, in general, overestimates the damping effects of the PCLD patch. The advantages and disadvantages of the proposed analytical approach and conventional analytical approach are discussed through some case studies.     

磁流变液构成的类梯度结构振动传递特性

提出了一种磁流变液构成的类梯度结构,并通过理论建模、数值计算和实验研究了该结构的振动传递特性.磁流变液在磁场作用下具有液固转换的特殊理化性质,而液固转换过程就是磁流变液的振动传递阻抗变化过程.因此,基于磁流变液的这一特性,通过控制磁场,构建了类梯度结构.基于弹性波传递的一维波动方程,建立了垂直入射的弹性波在类梯度结构中传递的波动方程.然后,使用连续介质的离散化方法和传递矩阵法进行求解,得到振级落差的表达式,对其进行数值计算,分析类梯度结构的振级落差随弹性波频率和磁场强度的变化趋势.最后,对类梯度结构的振动传递特性进行了实验研究,分析了磁场强度对类梯度结构振动传递特性的影响.研究结果表明,与均匀场作用的磁流变液相比,类梯度结构对弹性波的衰减效果更好,且该结构具备良好的可调控特性.     

Vibration analysis of a new curved beam element

The common practice in developing a locking-free curved beam element is to ensure that its interpolation functions of displacement explicitly satisfy the inextensible bending mode condition for the membrane locking-free instead of the rigid body modes. In this paper, we study the impact of this practice on the dynamic characteristics of a finite element by conducting vibration analysis using our newly developed three-node locking-free curved beam element. In this case, the inextensible bending mode condition is satisfied explicitly, while the rigid body modes are satisfied implicitly to 4th-order accuracy. Numerical and experimental examples show that with the newly developed curved beam element, developed by using the implicit representation of a rigid body mode condition, it is possible to recover the rigid body modes of curved beams with low and medium slenderness ratios. This is even true for cases involving a half-circular element and the vibration of the curved beam is predicted with high accuracy.     

Experimental results on a hydrostatic bearing lubricated with a magnetorheological fluid

Magnetorheological fluids can be used as a smart lubricant as a result of the fact that its properties can be changed with the use of a magnetic field. Local flow resistance and local pressure can be generated by applying a local magnetic field. This work presents a hydrostatic bearing in which the pressure profile of a conventional hydrostatic bearing is recreated with solely the use of a magnetic field and a magnetorheological fluid. The magnetic field is applied only locally at the outer edges of the bearing with the use of an electromagnet. The principle is demonstrated with the use of an experimental setup and a model from literature.     

Dimorphic magnetorheological fluid with improved rheological properties

A type of dimorphic magnetorheological (MR) fluid was prepared by adding wire-like iron nanostructures into the conventional carbonyl iron based MR fluid. The Fe nanowires were synthesized through reducing Fe²⁺ ion with excessive sodium borohydride in aqueous solution. The rheological behaviors of the dimorphic MR fluids were measured with a rotational rheometer and the sedimentation properties were also studied in this work. It was found that the Fe wires additives can greatly enhance the stress strength of the dimorphic MR fluids comparing with the conventional MR fluids. The sedimentation of the dimorphic MR fluids was also mitigated greatly.     

Dynamic analysis of magnetorheological elastomer-based sandwich beam with conductive skins under various boundary conditions

The dynamic analysis of a three-layered symmetric sandwich beam with magnetorheological elastomer (MRE) embedded viscoelastic core and conductive skins subjected to a periodic axial load have been carried out under various boundary conditions. As the skins of the sandwich beam are conductive, magnetic loads are applied to the skins during vibration. Due to the field-dependent shear modulus of MRE material, the stiffness of the MRE embedded sandwich beam can be changed by the application of magnetic fields. Using extended Hamilton’s principle along with generalized Galarkin’s method the governing equation of motion has been derived. The free vibration analysis of the system has been carried out and the results are compared with the published experimental and analytical results which are found to be in good agreement. The parametric instability regions of the sandwich beam have been determined for various boundary conditions. Here, recently developed magnetorheological elastomer based on natural rubber containing iron particles and carbon blacks have been used. The effects of magnetic field, length of MRE patch, core thickness, percentage of iron particles and carbon blacks on the regions of parametric instability for first three modes of vibration have been studied. These results have been compared with the parametric instability regions of the sandwich beam with fully viscoelastic core to show the passive and active vibration reduction of these structures using MRE and magnetic field. Also, the results are compared with those obtained using higher order theory.     

超声搅拌磁流变抛光液的声场仿真分析

为了探究超声搅拌磁流变抛光液的制备及优化工艺,利用多物理场数值计算方法,建立了超声搅拌磁流变抛光液的声场仿真模型。研究了20 kHz下不同液位深度、超声变幅杆探入深度、不同功率下磁流变抛光液的声场分布。通过测量磁流变抛光液的声场强度对声场仿真进行了验证。结果表明:随着距变幅杆距离的增加,声强逐渐减弱,高声强区域主要分布在换能器轴线附近。声强在距变幅杆输出端20 mm范围内急剧衰减,变幅杆最佳探入深度为10 mm,增大功率有助于空化区域的扩大。声场仿真结果与实验测量结果基本一致,对磁流变抛光液的制备提供了数值计算基础。     

Vibration of a rotating beam with tip mass

The vibration frequency of a rotating beam with tip mass is investigated. The finite element method is used, a third order polynomial being assumed for the variation of the lateral displacement. The effects of the root radius, the setting angle and the tip mass are incorporated into the finite element model. The results are compared with results from previous authors utilizing Myklestad and extended Galerkin methods. The results show that the setting angle has a significant effect on the first mode frequencies but not on the high frequencies. The tip mass tends to depress the frequencies at low speeds of rotation but it tends to increase the frequencies at high speeds of rotation. The results of this work have applications in wind turbine rotors, helicopter rotors, etc., and the method used here can be extended to investigate the vibration frequency of flexible blade auto cooling fans.     

部分相干光对周期性局域空心光束的影响

用旋转毛玻璃和光阑把激光变成部分相干光, 再经过双轴棱锥系统把一束平行光变成两束同频率但不同径向波矢分量的无衍射贝塞尔光, 相干叠加产生了部分相干的周期性局域空心光束. 通过干涉理论与实验结果相互佐证, 得出局域空心光束的周期为2.5 mm. 进一步探究入射光场相干度对产生局域空心光束的影响, 发现随着相干度的降低局域空心光束中心暗斑与周围光强的衬比度会降低, 但不影响局域空心光束的周期以及中心暗斑尺寸.     

Mie scattering of a partially coherent beam

The scattering of a partially coherent electromagnetic beam by a dielectric sphere is described. Two methods are presented: a coherent mode representation and a spherical harmonics expansion. In the case of a distant blackbody source, the coherent modes are plane waves and the scattered intensity is obtained by a convolution of the classical Mie results over the source surface.     

Vibration frequency of a curved beam with tip mass

In flexible blade auto cooling fans, the first vibration frequency is of fundamental importance. These fan blades are usually curved and have a tip mass in the form of a strip along one edge. For the first frequence, the blade can be modelled as a curved beam with a tip mass. This paper reports on an investigation of the vibration frequency of a curved beam with a tip mass, in which both theoretical finite element and experimental methods were used. In the finite element methods, both the normal and tangential displacements are approximated by cubic polynomials to ensure that rigid body displacements are closely represented. The effect of the tip mass is incorporated into the mass matrix. The results show that the curvature has a slight effect on the first mode natural frequencies but has great influence on the higher frequencies, and that the coupling effect between the tip mass and the curvature is insignificant.     

Shaping the beam profile of a partially coherent beam by a phase aperture

By use of a tensor method, an analytical formula for a partially coherent Gaussian Schell-model (GSM) beam truncated by a circular phase aperture propagating through a paraxial ABCD optical system is derived. The propagation properties of a GSM beam truncated by a circular phase aperture in free space are studied numerically. It is found that the circular phase aperture can be used to shape the beam profile of a GSM beam and generate partially coherent dark hollow or flat-topped beam, which is useful in many applications, e.g., optical trapping, free-space optical communication, and material thermal processing. The propagation factor of a GSM beam truncated by a circular phase aperture is also analyzed.     

Vibration frequencies for a non-uniform beam with end mass

This study deals with the determination of natural frequencies of a non-uniform cantilever beam which carries a concentrated mass at the free end. The effect of the rotary inertia of the end mass has been included. Numerical results for the first five eigenfrequencies are presented for a wide range of values of the beam dimensions and the concentrated mass.     

Beam propagation analysis of a multi beam FSO system with partially flat-topped laser beams in turbulent atmosphere

In this paper, the propagation properties of partially coherent flat-topped (PCFT) laser beams in multi-beam FSO communication links are analyzed. Analytical expressions for the average intensity and beam width of PCFT multi beams are derived based on extended Huygens–Fresnel principle by considering the effects of turbulent atmosphere. Also power in bucket (PIB) is calculated numerically based on analytical expression of average intensity. It is revealed that PCFT multi beams can be converted into a Gaussian beam after sufficiently large propagation distance. It is found that correlation length, order of flatness and beams’ separation distances in the source plane have strong effects on minimum distance required for this conversion as well as beam width and PIB. Obtained results are confirmed and illustrated with numerical examples and resulted graphs.     

Experimental generation of a partially coherent flat-topped beam

An efficient optical system is proposed to generate a partially coherent flat-topped (FT) beam theoretically. Furthermore, we report the experimental generation of a partially coherent FT beam based on the proposed optical system. The intensity distribution and the modulus of the square of the spectral degree of coherence of the generated partially coherent FT beam are measured. The experimental results are consistent with the theoretical results.     

Generation of a high-quality partially coherent dark hollow beam with a multimode fiber

We report the experimental generation of a high-quality partially coherent dark hollow beam (DHB) by coupling a partially coherent beam into a multimode fiber (MMF) with a suitable incidence angle. The interference experiment of the generated partially coherent DHB passing through double slits is demonstrated. It is found that the coupling efficiency of the MMF, the quality, and the coherence of the generated partially coherent DHB are closely controlled by the coherence of the input beam.     

A behavior model of a magnetorheological fluid in direct shear mode

A model that considers the mutual interaction between particles and the external field in a magnetorheological (MR) fluid is proposed. The model predicts the magnetization, interaction energy density, and shear stress against an imposed strain along the planar direction under a uniform magnetic field. Using the Lekner summation method, slowly convergent magnetization functions are transformed into rapidly convergent ones. By applying the proposed model to an application suitable for commercial clutches and dampers working in direct shear mode, it is revealed that the mean magnetization vector and the associated functional quantities of the MR fluid behave harmonically with respect to the imposed shear strain.