Influence of cement flow and aggregate type on the mechanical and acoustic characteristics of porous concrete

The influence of cement flow and aggregate type on the mechanical and acoustic characteristics of porous concrete is systematically investigated in the present study. Three levels of cement flow (80%, 110%, and 140%) and five types of aggregates (normal aggregates of 8-13 mm and 13-19 mm and lightweight aggregates of 4-8 mm, 8-12 mm, and 12-19 mm) are used, and effects of the application of AE admixtures in paste were also studied. Single-layered and double-layered porous concrete specimens are fabricated to examine the effect of different layer configuration on the acoustic characteristics. For the purpose of comparison, the void ratio, compressive strength, and sound absorption coefficient of the specimens are used as evaluation parameters. Based on the findings of the study, a sound absorbing porous concrete with a maximum absorption coefficient of approximately 1.00 is developed, and the minimum absorption coefficient of the ‘double-layered porous concrete’ structure is shown to be more than 0.60 with a frequency of 400 Hz or above, considering the tolerant error.     

Electronic, elastic, optical properties of rutile TiO2 under pressure: A DFT study

The electronic, elastic constants and optical properties of rutile TiO₂ have been investigated using first principle pseudopotential method within generalized gradient approximation (GGA) proposed by Perdew-Burke-Ernzerhof (PBE). The calculated volume, bulk modulus and pressure derivative of bulk modulus are in good agreement with previous experimental and computational results. An underestimated band gap (1.970 eV) along with the higher density of states and expanded energy bands around the fermi level is obtained. Calculated elastic constants satisfying the Born stability criteria suggest that rutile TiO₂ is mechanically stable under higher hydrostatic pressure. The acoustic wave speeds in [1 0 0], [0 1 0], [0 0 1], [1 1 0] and [45° to [1 0 0] and [0 0 1]] directions are predicted using the investigated elastic constants. The dielectric constant is identified with respect to electronic band structure and is utilized to derive the other optical properties like refractive index, energy loss function, reflectivity and absorption. The effect of hydrostatic pressure (0-70 GPa) is described for listed properties. Our investigated results are in good accord with the existing theoretical and experimental results.     

Evaluation of sound absorption capacity of asphalt mixtures

Noise generation is an environmental problem that affects human beings, animals and even plants. Several serious diseases have their development associated to the exposure of human beings to high levels of noise pressure, such as arterial hypertension, gastrointestinal changes, alterations in blood glucose and high heart rate, among others. Vehicle traffic is part of a group of noise-generating factors. Various mechanisms govern the generation and propagation of vehicle noises, which are produced mainly by motor vibration at speeds below 50 km/h and by the tire-pavement contact at speeds above 50 km/h. The noise generated by tire-pavement contact is the result of two components: aerodynamic noise (mainly related to the coating porosity), and mechanical noise (related to the coating texture). The noise generation according to these two components may be mitigated by using special asphalt mixtures. This work evaluates the sound absorption of four different types of asphalt mixtures (common dense-graded asphalt mixture, dense-graded rubberized asphalt mixture, rubberized porous coat with void volumes varying from 22% to 27%, and rubberized open-graded friction course) and the effect of granulometry and void volume of each mixture on the sound absorption coefficient. Mixture slabs were molded in a slab compactor developed by LCPC (Laboratoire Central des Ponts et Chaussées) and specimens were extracted from each one for assessing the sound absorption capacity in the laboratory. The acoustic behavior was evaluated according to standard ISO 10534-2, using impedance tubes. Results showed that sound absorption is strongly influenced by void percentage, interconnected void percentage and layer thickness.     

Acoustical properties of aerated autoclaved concrete

This work analyses acoustic qualities of autoclaved aerated concrete (AAC). Three the most widely used types of AAC are chosen for the analysis: gas cement concrete, gas cement concrete with combined binder (Portland cement and lime), and foam cement concrete. The procedure and technique of the materials’ formation is presented in this work. The evaluation of acoustic qualities of AAC is based on the material’s air permeability and porosity (i.e., ratio of the volume of the interconnected pores to the total volume of pores). For this purpose the measurements obtained by an acoustic interferometer are used. The results of the experiment show that regression equations for the AAC types, which density ranges from 250 to 500 kg/m³, may be used to estimate the materials’ normal incidence absorption coefficient values, which depend on the air permeability and porosity. Results show that absorption coefficient of not specially treated AAC is rather low. According to the measurements obtained in a special reverberation room of 202 m³, a sound absorption coefficient may increase up to 0.6, provided that slits of Helmholtz resonator’s type are made in the slabs of AAC gas cement concrete with combined binder.     

Low frequency in situ metrology of absorption and dispersion of sound absorbing porous materials based on high power ultrasonic non-linearly demodulated waves

The present work is related to acoustic in situ free-field measurements of sound absorption in porous materials, such as cellular plastic foams, glass-wool or recycled felt materials. The emphasis is given towards fine metrology of absorption in view of potential industrial applications. A powerful ultrasonic array working at 40 kHz is used. It enables to measure absorption acoustical data down to 100 Hz due to the exploitation of the non-linear ultrasonic demodulation phenomenon in air. Fine measurements of acoustic absorption are compared to numerical predictions based on the “equivalent-fluid” model (when the squeleton frame is motionless), and to some measurements performed on a Brüel and Kjaer impedance tube. Dispersion curves are also measured and compared to the numerical predictions for some automotive felt materials which are compressed at various ratios. Data obtained with a dedicated portable instrument are also discussed for the same type of materials and configurations.     

Experimental measurements of acoustical properties of snow and inverse characterization of its geometrical parameters

Snow is a sound absorbing porous sintered material composed of solid matrix of ice skeleton with air (+water vapour) saturated pores. Investigation of snow acoustic properties is useful to understand the interaction between snow structure and sound waves, which can be further used to devise non-destructive way for exploring physical (non-acoustic) properties of snow. The present paper discusses the experimental measurements of various acoustical properties of snow such as acoustic absorption coefficient, surface impedance and transmission losses across different snow samples, followed by inverse characterization of different geometrical parameters of snow. The snow samples were extracted from a natural snowpack and transported to a nearby controlled environmental facility at Patsio, located in the Great Himalayan range of India. An impedance tube system (ITS), working in the frequency range 63–6300 Hz, was used for acoustic measurements of these snow samples. The acoustic behaviour of snow was observed strongly dependent upon the incident acoustic frequency; for frequencies smaller than 1 kHz, the average acoustic absorption coefficient was found below than 0.4, however, for the frequencies more than 1 kHz it was found to be 0.85. The average acoustic transmission loss was observed from 1.45 dB cm⁻¹ to 3.77 dB cm⁻¹ for the entire frequency range. The real and imaginary components of normalized surface impedance of snow samples varied from 0.02 to 7.77 and −6.05 to 5.69, respectively. Further, the measured acoustic properties of snow were used for inverse characterization of non-acoustic geometrical parameters such as porosity, flow resistivity, tortuosity, viscous and thermal characteristic lengths using the equivalent fluid model proposed by Johnson, Champoux and Allard (JCA). Acoustically derived porosity and flow resistivity were also compared with experimentally measured values and good agreement was observed between them.     

Theoretical and experimental study of the ultrasonic attenuation in bovine cancellous bone

In this study a theoretical approach for the estimation of ultrasonic attenuation is proposed. The approach combines two models which take into account both absorption and scattering. Attenuation due to absorption is studied by using the Biot’s analytical model whereas that due to scattering is described by means of a generalized weak scattering model which is formulated for binary mixtures. The scattering model takes account of the density fluctuation of the porous medium in addition to the propagation velocity fluctuation. For the calculation of the attenuation coefficient due to absorption, experimental values have been used to link size of pores to porosity. The theoretical results have been compared with experimental data obtained on bovine cancellous bone samples filled with water. Using an immersion acoustic transmission method, the ultrasonic attenuation has been measured at a frequency range between 0.1 and 1.0 MHz for 12 bovine cancellous bone samples with a porosity range between 40% and 70%. The prediction of attenuation with this model appears to correspond more closely to its experimentally observed behavior. This study indicates that scattering is the predominant mechanism which is responsible for attenuation in trabecular bone. Furthermore, it shows that the density fluctuations contribute significantly to the phenomenon of attenuation and cannot thus be neglected.     

Ultrathin porous pavement made with high viscosity asphalt rubber binder: A better acoustic absorption?

This work presents a non-destructive technique applied to ultrathin porous asphalt pavements that allows us to characterize their internal structure. Comparison between acoustic absorption data from experimental tests with an impedance tube and analytical simulation leads to an optimization of intrinsic parameters, such as tortuosity, airflow resistivity and porosity. The studied ultrathin specimens are of a high air void content porous mixture made with conventional polymer modified bituminous binder and high viscosity rubber binder. It has been found that one of the studied mixtures presents less air void content than specified by the manufacturer, and thus absorbs less noise as foreseen. Finally, in this case it appears that using a high viscosity asphalt rubber binder has no influence on maximum acoustic absorption but on the frequency of appearance of this maximum, tortuosity and airflow resistivity.     

First-principles study of elastic and thermo-physical properties of kesterite-type Cu2ZnSnS4

The lattice constants and elastic constants of the kesterite-type Cu₂ZnSnS₄ have been calculated using density-functional theory (DFT). The calculated lattice constants are in good agreement with the experimental data. The calculated elastic constants indicate that the bonding strength along the [1 0 0] and [0 1 0] directions is as strong as the one along the [0 0 1] direction. The high B/G ratio shows that the kesterite-type Cu₂ZnSnS₄ compound has ductile behavior. Finally, using the Debye model, the volume, bulk modulus and heat capacity as a function of temperature for the kesterite-type CZTS have been estimated at different pressures. The Debye temperature and Gruneisen parameter are 157 K and 2.28 at 300 K temperature, respectively. The present results can give some information for the design of the kesterite-type CZTS compounds, and these can also be used to stimulate future experimental and theoretical work.     

Optical absorption of 1,3-diphenyl-1H-Pyrazolo[3,4-b]quinoline and its derivatives

Paper deals with the experimental investigations and quantum chemical calculations of the absorption spectra of newly synthesized 1,3-diphenyl-1H-Pyrazolo[3,4-b]quinoline and its 6-Vinyl, 6-N,N-Diphenyl, 6-Methyl, 6-Fluoro, 6-Bromo, and 6-Chloro derivatives. The calculations are performed by means of the semiempirical quantum chemical methods AM1 or PM3 combined with: (a) equilibrium molecular conformation (EMC) in vacuo; (b) the molecular conformation model considering a dynamical rotation of phenyl rings only (T = 300 K); and (c) the most general model of the conformational molecular dynamics (MD) at T = 300 K. It is shown that the phenyl dynamics appears to be not important in the spectral position of absorption thresholds as well as in a broadening of most absorbtion bands. On the other hand, the MD simulations reproduce a broadening of the absorbtion spectra as well as the electron-vibronic coupling leading to a red-shift of absorption bands with increasing of temperature. The conformational MD model in combination with the quantum chemical AM1 method gives in most cases the best agreement with the experimental data, namely in the sense of spectral positions and width of the absorption bands including first oscillators (absorption thresholds).     

Influence of Li/Nb ratios on defect structure and photorefractive properties of Zn: In: Fe: LiNbO3 crystals

A series of Zn: In: Fe: LiNbO₃ crystals are grown by the Czochralski technique with various ratios of Li/Nb = 0.94, 1.05, 1.20 and 1.38 in the melt. The Zn, In, Fe, Nb and Li concentrations in the crystals are analyzed by inductively coupled plasma (ICP) spectrometry. The results indicate that with increasing the [Li]/[Nb] ratio in melt, [Li]/[Nb] ratio increases and goes up continuously in the crystal, the segregation coefficients of both Zn and In ions decrease. The absorption spectra measurement and two-wave coupling experiment are employed to study the effect of [Li]/[Nb] ratio on photorefractive properties of Zn: In: Fe: LiNbO₃ crystals. It is found that the [Li]/[Nb] ratio increases, the write time is shortened and the photorefractive sensitivity is improved.     

Acoustic modeling of perforated concrete using the dual porosity theory

Perforated concrete shows nowadays a high potential for many construction and building engineering applications. This work is devoted to the analysis of the acoustic properties of perforated concrete made from arlite lightweight aggregates. Concrete produced from these materials is an environmentally friendly alternative to traditional materials and offers a higher durability, excellent strength-to-weight ratio and low cost. In particular, it is shown that the acoustic behavior of perforated concrete can be modeled using a dual porosity approach based on the knowledge of the non-acoustic properties of the matrix granular material and geometrical data. To this end, various non-perforated and perforated samples were prepared and characterized in an experimental test facility, their acoustic properties being determined through the transfer function impedance tube method. Experimental and estimated results related to the acoustic properties of a number of prepared specimens are presented, showing a good agreement. Results suggest that this approach is suitable for practical design of such materials as part of noise control systems.     

Suitability of laser Doppler velocimetry for the calibration of pressure microphones

The details of a new approach for absolute calibration of microphones, based on the direct measurement of acoustic particle velocity using laser Doppler velocimetry (LDV), are presented and discussed. The calibration technique is carried out inside a tube in which plane waves propagate and closed by a rigid termination. The method developed proposes to estimate the acoustic pressure with two velocity measurements and a physical model. Minimum theoretical uncertainties on the estimated pressure and minimum measurable pressure are calculated from the Cramer Rao bounds on the estimated acoustic velocity amplitude and phase. These uncertainties and the minimum measurable pressure help to optimize the experimental set up. Acoustic pressure estimations performed with LDV are compared with acoustic pressures obtained with a reference microphone. Measurements lead to a minimum bias of 0.006 dB and a minimum uncertainty of 0.013 dB on the acoustic pressure estimation for frequencies 1360 Hz and 680 Hz.     

Analytical and numerical calculations of optimum design frequency for focused ultrasound therapy and acoustic radiation force

Focused ultrasound therapy relies on acoustic power absorption by tissue. The stronger the absorption the higher the temperature increase is. However, strong acoustic absorption also means faster attenuation and limited penetration depth. Hence, there is a trade-off between heat generation efficacy and penetration depth. In this paper, we formulated the acoustic power absorption as a function of frequency and attenuation coefficient, and defined two figures of merit to measure the power absorption: spatial peak of the acoustic power absorption density, and the acoustic power absorbed within the focal area. Then, we derived “rule of thumb” expressions for the optimum frequencies that maximized these figures of merit given the target depth and homogeneous tissue type. We also formulated a method to calculate the optimum frequency for inhomogeneous tissue given the tissue composition for situations where the tissue structure can be assumed to be made of parallel layers of homogeneous tissue. We checked the validity of the rules using linear acoustic field simulations. For a one-dimensional array of 4 cm acoustic aperture, and for a two-dimensional array of 4 × 4 cm² acoustic aperture, we found that the power absorbed within the focal area is maximized at 0.86 MHz, and 0.79 MHz, respectively, when the target depth is 4 cm in muscle tissue. The rules on the other hand predicted the optimum frequencies for acoustic power absorption as 0.9 MHz and 0.86 MHz, respectively for the 1D and 2D array case, which are within 6% and 9% of the field simulation results. Because radiation force generated by an acoustic wave in a lossy propagation medium is approximately proportional to the acoustic power absorption, these rules can be used to maximize acoustic radiation force generated in tissue as well.     

The impact of the neck material on the sound absorption performance of Helmholtz resonators

Helmholtz resonators with sound absorption materials filling the neck may have an improved sound absorption capacity. In this work, parallel perforated ceramics with different perforation diameters were installed into the neck of a Helmholtz resonator to improve its acoustic impedance to simultaneously achieve a better acoustic absorption coefficient and a wider absorption bandwidth. An experimental system was built to investigate the effect of the perforation diameters on the sound absorption performance of the resonator. It is found that nonlinear effects near the resonance frequency affect the resonator?s neck mouth impedance and further its sound absorption performance significantly. For frequency range 50–500 Hz, a model of the neck mouth impedance is developed based on a revised Forchheimer relationship. The experimental results are in good agreement with the theoretical model.     

Effect of the open roof on low frequency acoustic propagation in street canyons

This paper presents an experimental, numerical and analytical study of the open roof effect on acoustic propagation along a 3D urban canyon. The experimental study is led by means of a street scale model. The numerical results are performed with a 2D-Finite Difference in Time Domain approach adapted to take into account the acoustic radiation losses due to the street open roof. An analytical model, based on the modal decomposition of the pressure field in the street width mixed with a 2D image sources model including the reflection by the open roof, is also presented. Results are given for several frequencies in the low frequency domain. The comparison of these approaches shows a quite good agreement until f = 100 Hz at full scale. For higher frequency, experimental results show that the leakage, due to the street open roof, is not anymore uniformly distributed on all modes of the street. The notion of leaky modes must be introduced to model the acoustic propagation in a street canyon.     

Measurements and modelling of high pressure pure CO2 spectra from 750 to 8500 cm. I—central and wing regions of the allowed vibrational bands

Precise modelling of infrared absorption by carbon dioxide is of primary importance for radiative transfer calculations in CO₂-rich atmospheres like those of Venus and Mars. Despite various measurements and theoretical models dedicated to this subject, accurate data at different temperatures and pressures are still lacking in numerous spectral regions. In this work, using two Fourier Transform Spectrometers, we have measured spectra of pure CO₂ in a large spectral region range, from 750 to 8500 cm⁻¹ at various densities (3-57 amagat) and temperatures (230-473 K). Comparisons between measured dipolar absorption bands and spectra calculated with the widely used Lorentz line shape show very large discrepancies. This result is expected since the Lorentz approach neglects line-coupling effects due to intermolecular collisions which transfer absorption from the wings to the band center. In order to account for this effect, a theoretical approach based on the impact and Energy Corrected Sudden approximations has been developed. Comparisons of this model with numerous laboratory spectra in a wide range of pressure, temperature and spectral domain show satisfactory agreements for band centers and near wing regions where the impact approximation is valid. However, as expected, due to the breakdown of the impact approximation, the model fails when considering far wing regions. In the absence of precise models accounting for line-mixing and finite collision duration (non impact) effects, empirical approximations are proposed in order to model the far wings.     

Acoustical and elastic properties of transition metal nitrides

Elastic moduli of transition metal nitrides, TiN, ZrN and HfN, have been evaluated using electrostatic and Born repulsive potentials. Acoustical dissipation due to phonon-phonon (p-p) interaction, thermoelastic mechanism and dislocation damping due to screw and edge dislocations has been evaluated in the temperature range 50-500 K along the three crystallographic directions of propagation, viz. [1 0 0], [1 1 0] and [1 1 1] for longitudinal and shear modes. Grüneisen numbers, acoustic coupling constants and their ratios have been evaluated for the longitudinal and shear waves. Results are in good agreement with available data.     

The sound speed and attenuation in loose and consolidated granular formulations of high alumina cements

Clinkers of high alumina cements are separated into three granular formulations with particle sizes in the range 0.6-0.71 mm, 0.71-1.18 mm and greater than 1.18 mm. These are used to manufacture consolidated samples of porous concrete in an autoclave. The acoustic and microscopic properties of loose and consolidated porous samples of concrete are investigated using both experimental methods and mathematical modelling. Values of porosity, flow resistivity, tortuosity and parameters of the pore size distribution are determined and used to predict closely the sound speed, acoustic attenuation and normal incidence absorption coefficient of these materials. It is shown that high alumina cements do not require additional binders for consolidation and that the structural bonds in these cements are developed quickly between individual clinkers in the presence of water. The hydration product build-up during the consolidation process is insignificant which ensures good acoustic performance of the consolidated samples resulting from a sufficient proportion of the open pores. The value of porosity in the consolidated samples was found to be around 40%, which is close to that measured in some commercial acoustic absorbers. This work provides a foundation for the development of acoustically efficient and structurally robust materials, which can be integrated in environmentally sustainable concrete and masonry structures.     

Novel W-shaped and straight porous ZnO nanobelts

Novel W-shaped porous ZnO nanobelt with the periodical junction angles of about 118° and straight porous ZnO nanobelt have been successfully synthesized. The W-shaped structure growth changes from [0 0 0 1] to periodically. The straight nanobelt grows along [0 0 0 1] direction. Both of the structures have smooth surfaces with high porous density. Based on our X-ray diffraction (XRD), electron microscopy and photoluminescence (PL) spectrum study, the growth mechanism of the special ZnO nanostructures is discussed, emphasizing the effect of alteration of the reactant concentration for two different morphologies.