Implementation issues of the nearfield equivalent source imaging microphone array

This paper revisits a nearfield microphone array technique termed nearfield equivalent source imaging (NESI) proposed previously. In particular, various issues concerning the implementation of the NESI algorithm are examined. The NESI can be implemented in both the time domain and the frequency domain. Acoustical variables including sound pressure, particle velocity, active intensity and sound power are calculated by using multichannel inverse filters. Issues concerning sensor deployment are also investigated for the nearfield array. The uniform array outperformed a random array previously optimized for far-field imaging, which contradicts the conventional wisdom in far-field arrays. For applications in which only a patch array with scarce sensors is available, a virtual microphone approach is employed to ameliorate edge effects using extrapolation and to improve imaging resolution using interpolation. To enhance the processing efficiency of the time-domain NESI, an eigensystem realization algorithm (ERA) is developed. Several filtering methods are compared in terms of computational complexity. Significant saving on computations can be achieved using ERA and the frequency-domain NESI, as compared to the traditional method. The NESI technique was also experimentally validated using practical sources including a 125 cc scooter and a wooden box model with a loudspeaker fitted inside. The NESI technique proved effective in identifying broadband and non-stationary sources produced by the sources.     

A miniaturized adaptive microphone array under directional constraint utilizing aggregated microphones

This paper introduces a miniaturized microphone array using the Directionally Constrained Minimization of Power (DCMP) method, which utilizes the transfer functions of microphones located at the same place, namely aggregated microphones. The phased microphone array realizes a noise reduction and direction of arrival (DOA) estimation system according to differences in the arrival time, phase shift, and/or the level of the sound wave for each microphone. Hence it is difficult to miniaturize the microphone array. The objective of our research is to miniaturize the system size using aggregated microphones. In this paper, we first show that the phased microphone array system and the proposed aggregated microphone system can be described within the same framework. We then apply a microphone array under directional constraint to the aggregated microphones and compare the proposed method with the microphone array. We show the directional pattern of the aggregated microphones. We also show the experimental results regarding DOA estimation.     

基于宽带分裂阵列的水下远程被动多目标检测与定向

为获取更高的水下远程多目标检测和定向性能,基于工程中广泛应用的最小方差无畸变响应(MVDR)波束形成算法,设计了大间隔分裂线列阵,通过扩大阵列有效孔径改善了空间谱峰锐度。同时提出非相干宽带预处理方法,利用MVDR在多频子带下波束宽度和间隔的非一致性来抵消由于稀布阵元造成的栅瓣效应。最终实现大间隔分裂阵和宽带非相干波束形成的互补。仿真和湖上试验结果表明,与采用宽带MVDR的均匀线列阵和采用互相关法的大间隔分裂阵相比较,所提方法能显著提高对水下远程目标的检测和分辨性能。      

提高成像分辨率的远场多孔声全息方法

针对远场声全息成像分辨率较差的问题,提出多孔声全息方法。利用多个小型传声器阵列进行优化布置,可以有效地提高分辨率,达到等效大阵列的声场可视化效果。首先推导了空间多孔加窗对远场Kirchhoff衍射积分声全息带来的干涉叠加效应;然后对主瓣宽度和旁瓣高度进行了定量计算,阐述了多孔优化布置方法,实现了旁瓣抑制条件下的分辨率最优;最后利用双音箱实验,验证了多孔声全息的可行性和理论分辨率,证明了多孔声全息方法的有效性。研究表明,多孔声全息的干涉叠加方法可以有效提高远场测量的重建分辨率,多孔声全息的优化设计方法可以实现旁瓣抑制条件下的分辨率最优。      

随机相控高强度聚焦超声换能器的栅瓣抑制

采用3种随机排列策略形成相控阵元线性排列结构抑制高强度聚焦超声(HIFU)相控阵栅瓣.第1种和第2种策略中阵元基于规则排列随机移动,而第3种策略中阵元则直接进行随机移动,阵元可移动范围依次为:第1种＜第2种＜第3种.采用瑞利积分和非线性Westervelt方程分别计算了3种策略对应随机相控阵产生的线性和非线性声场,并通...     

Numerical and experimental study on coherent beam combining of fibre amplifiers using simulated annealing algorithm

We present the numerical and experimental study on the coherent beam combining of fibre amplifiers by means of simulated annealing (SA) algorithm. The feasibility is validated by the Monte Carlo simulation of correcting static phase distortion using SA algorithm. The performance of SA algorithm under time-varying phase noise is numerically studied by dynamic simulation. It is revealed that the influence of phase noise on the performance of SA algorithm gets stronger with an increase in amplitude or frequency of phase noise; and the laser array that contains more lasers will be more affected from phase noise. The performance of SA algorithm for coherent beam combining is also compared with a widely used stochastic optimization algorithm, i.e., the stochastic parallel gradient descent (SPGD) algorithm. In a proof-of-concept experiment we demonstrate the coherent beam combining of two 1083~nm fibre amplifiers with a total output power of 12~W and 93% combining efficiency. The contrast of the far-field coherently combined beam profiles is calculated to be as high as 95%.     

前视声呐圆弧接收阵列结构优化设计

针对前视声呐线阵波束形成各向同性较差及半圆阵有效孔径受限的问题,提出了一种优化的圆弧接收阵列结构设计方法。根据不同的成像开角,设计圆弧接收阵圆心角使全部阵元参与所有来波方向的波束形成。建立圆弧接收阵的远近场聚焦模型,并推导圆弧接收阵的指向性函数,根据边界波束栅瓣阈值条件计算具有最佳波束性能的圆弧接收阵半径。对圆弧阵、线阵及半圆阵在不同扇区开角下的波束性能及扫查开角120°、纵深100 m的仿真图像对比表明,在成像开角为90°到130°时,圆弧接收阵主瓣性能提升了8%,边界波束栅瓣级优化了4%,交叉向分辨深度相对线阵与半圆阵分别增加了20 m和45 m,同时参数存储量仅为线阵的2.7%。该阵列兼具有效孔径大、波束各向同性的优点,能有效提高前视声呐系统探测性能,并降低算法实现难度。      

硅基光学相控阵性能评估方法

针对典型光学相控阵,建立了一套硅基光学相控阵芯片性能评估方法,为光学相控阵优化设计提供可靠的数据支撑.通过设计傅里叶成像系统对光学相控阵进行动态成像,能够实现对近场远场成像的同步观察.在该基础上设计校准方案对相控阵初始相位进行校准优化,同时对扫描速度、角度和精度等特性参数进行了从理论推导和仿真到测试系统结构设计的整体分...     

Optimal two-layer directive microphone array with application in near-field acoustical holography

Conventional near-field acoustical holography (NAH) is generally based on the free-field assumption, which can cause errors when interfering sources are present in practical environments. To cope with this problem, previous research suggested a combined pressure-velocity approach for NAH that provides certain advantages to rejection of interferences. This paper revisits this idea in a broader context of optimal array design and examines the feasibility of using unidirectional microphones in each channel of the array such that the robustness of inverse reconstruction is enhanced against interfering sources. As indicated in the simulation, the numerical noise in finite difference estimation of particle velocity can nullify the advantage of the well-conditioned velocity-based reconstruction. In the proposed approach, the characteristics of each array channel consisting of two microphones are tailored by taking into account not only the directivity, but also the robustness against self-noise. An objective function based on directivity index and white noise gain is exploited in a linear quadratic optimization of a two-element end-fire array. The proposed optimal array is validated in conjunction with the equivalent source model (ESM) -based NAH through numerical simulations, with an interfering source positioned behind the array. The results have shown the directive optimal array has yielded improved quality of images in comparison with conventional approaches in the presence of an interfering source and sensor noise.     

Source characterization of a subsonic jet by using near-field acoustical holography

In the present study, patch near-field acoustical holography was used in conjunction with a multireference, cross-spectral sound pressure measurement to visualize the sound field emitted by a subsonic jet and to predict its farfield radiation pattern. A strategy for microphone array design is described that accounts for the low spatial coherence of aeroacoustic sources and for microphone self-noise resulting from entrained flow near the jet. In the experiments, a 0.8-cm-diameter burner was used to produce a subsonic, turbulent jet with a Mach number of 0.26. Six fixed, linear arrays holding eight reference microphones apiece were disposed circumferentially around the jet, and a circular array holding sixteen, equally spaced field microphones was traversed along the jet axis to measure the sound field on a 30-cm-diameter cylindrical surface enclosing the jet. The results revealed that the jet could be modeled as a combination of eleven uncorrelated dipole-, quadrupole-, and octupole-like sources, and the contribution of each source type to the total radiated sound power could be identified. Both the total sound field reconstructed in a three-dimensional space and the farfield radiation directivity obtained by using the latter model were successfully validated by comparisons to directly measured results.     

Aperture and element minimization in linear sparse arrays with desired beam patterns

In this paper, an optimization method aimed at designing aperiodic linear sparse arrays is proposed that is based on the stochastic optimization methodology called simulated annealing. Such a method optimizes the positions and the weight coefficients of each element of a linear array in order to obtain a beam pattern that meets given requirements. Moreover, while positions and weights are optimized, minimization of both the number of elements and the spatial aperture is carried out. In this way, a beam pattern without grating lobes and close to the desired one is produced using a small number of elements and a short aperture. The results obtained are impressive in terms of improvement of array characteristics and performance over those reported in the literature, while a great flexibility in defining the desired beam pattern is allowed. Finally, it is proved that the array configurations need a number of elements very close to the absolute minimum to achieve the desired beam pattern.     

可模式识别的水声成像方法

提出一种在自由环境中可以进行模式识别的水声成像方法。利用角域滤波将空间不同入射方向的平面波在阵元域中进行分离,在成像扇面内按要求设计一系列角域带通滤波器,这些滤波器的输出就是从角通带内入射的平面波在阵元域中的快拍数据,可以实现要求输入为阵元域特性数据的目标识别和底质分类等专用的模式识别算法,角域滤波器输出的平面波快拍数据的幅度作为像素值进行水声成像。采用角域滤波的方法可以进行水声成像得到所需要的声图,并且每个像素对应着相应点目标远场平面波入射到接收阵时所产生的快拍数据。仿真和实验数据处理结果表明,采用角域滤波和利用常规波束形成所得到的声图是一样的,并且两种成像方法具有相同的稳健性。      

Study on the imaging characteristics of far-field superlens

The optical transfer function of the far-field superlens imaging system is established in this thesis to make it easy to describe the corresponding relation between the far-field angular spectrum and the near-field object superresolution information. We utilized the established optical transfer function to make detailed research on the imaging characteristics of the far-field superresolution, also reconstruct the near-field nano-information through the far-field angular spectrum, which proves that the resolution of the far-field superlens with structure coupled with metal grating can reach 50 nm, and provides a helpful reference for the study of the new optical microscope imaging of superresolution.     

固体中线性相控阵列的瞬态聚焦特性

针对线性相控阵列在固体介质中的声场聚焦特性及参数优化问题,该文给出了一个线性阵列的纵波瞬态聚焦声场模型.数值结果表明,当阵元被短时脉冲信号激励时,瞬态聚焦声场中不会形成栅瓣,突破了传统稳态理论模型中对阵元间距的限制;同时由于横纵波在聚焦区域内可完全分离,声束旁瓣的幅值也得到了抑制.其次,增大阵元间距能够显著提高聚焦性能...     

Coherent beam combination of broad-area laser diode array using off-axis external cavity with double feedback

In this letter, we demonstrate coherent beam combination of laser diode array using the external Talbot cavity with double feedback. The double feedback elements consist of grating and high-reflection plane mirror. Compared with single high-reflection plane mirror feedback, the external Talbot cavity with double feedback reduce the number of interference strips in the far-field pattern and narrow spectral line-width of the laser diode array. The results indicate that the application of the external Talbot cavity with double feedback produces a clear far-field interference pattern. In addition, line-width is reduced to 0.15 nm full-width at half-maximum (FWHM).     

合成近场校准基阵的方法研究

本文利用单根的束控线阵来构造一个虚拟近场校准基阵,使换能器能在它的近场直接测量辐射声场特性。通过利用改进的矩阵稳定技术,解决了求解束控线阵的束控系数时最小二乘解的稳定性和实用性问题。借助计算机仿真,研究了特定线阵条件下,合成近场测量基阵（Ｓ－ＮＦＣＡ）的近场空间的平面波均匀性与线阵间的间距、线阵的工作频率之间的关系。并以小球源为阵元合成一虚拟平面ＮＦＣＡ,用它对一平面喇叭换能器的近场测量得到远场指向性,并与远场实测结果比较,得到了相当吻合的结果。     

Beam pattern of sparse array for passive sonar

This work aims at sparse array without grating lobe for passive sonar, in order to increase frequency band of the passive sonar and reduce the cost. According to traditional method, the distance between two contiguous sensors in sonar array should be less than the wavelength of highest frequency of the signal; otherwise the grating lobe appears on beam pattern. The paper realizes that the conclusion of the grating lobe emergence it is not fit to the passive sonar due to the sine wave signal model in traditional method, in fact the input of passive sonar is random signal. Prom three aspect of the computer simulation, real passive sonar signal and theory analysis, it is revealed that the grating lobe does not appear on beam pattern when the distance between two contiguous sensors in passive sonar array is longer than wavelength of highest frequency. Whitening of the radiated noise can widen the frequency band, to ensure the beam pattern without the grating lobe. The conclusion of the paper is: if the band of radiated noise is wide enough (broader than 1 octave), that the wavelength of signal can be shorter than the distance between two contiguous sensors in passive sonar without grating lobe.     

Fabry-Perot interferometer with diffraction-scattered reflection of light

The incorporation of a phase grating into the optical system of a Fabry-Perot interferometer makes it possible to transform the incident beam of light so that the major part of energy in the reflected wave is contained in the side lobes in the far-field diffraction pattern and radiation in the zero order of diffraction along the optical axis is suppressed. Experimental results are presented, which are obtained with a grating produced by evaporating a thin-layer dielectric coating onto the input mirror of the interferometer.     

畴腐蚀掺镁铌酸锂可调阵列光分束器的研究

研究了不同畴腐蚀深度的掺镁铌酸锂二维六角可调阵列光分束器的分数Talbot效应.对不同Talbot分数β和不同畴腐蚀深度的阵列光分束器Talbot衍射像进行了数值模拟理论研究.模拟结果表明,Talbot分数β可以改变Talbot衍射像的周期及结构分布,而畴腐蚀深度可有效调制衍射像的光强分布.在理论研究的基础上,设计并制备了具有不同畴腐蚀深度的掺镁铌酸锂二维六角阵列光分束器,对其在不同Talbot分数β条件下的分数Talbot效应进行了通光实验研究,实现了畴腐蚀阵列光分束器对近场Talbot衍射光强分布的调制,实验结果与理论研究结果一致.