CTAB assisted hydrothermal synthesis, controlled conversion and CO oxidation properties of CeO2 nanoplates, nanotubes, and nanorods

In this work, CeO₂ nanoplates were synthesized by a hydrothermal reaction assisted by hexadecyltrimethylammonium bromide (CTAB) at 100-160 °C. The size of nanoplates was around 40 nm. Further experiment showed that the controlled conversion of nanoplates into nanotubes, and nanorods can be realized by changing the reaction time, temperature, and CTAB/Ce³⁺ ratio value. X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) nitrogen adsorption-desorption measurements were employed to characterize the samples. The CO oxidation properties of nanorods, nanoplates, and nanotubes were investigated. An enhanced catalytic activity has been found for CO oxidation by using CeO₂ nanoplates as compared with CeO₂ nanotubes and nanorods, and the crystal surfaces (100) of CeO₂ nanoplates were considered to play an important role in determining their catalytic oxidation properties.     

Green, effective chemical route for the synthesis of silver nanoplates in tannic acid aqueous solution

Silver nanoplates, with average size tunable from 50 to 500 nm, have been synthesized via a simple room-temperature tannic acid (TA) solution-phase chemical reduction method. The synthesis was a seedless process in which tannic acid was used as a reducing as well as a capping agent, and did not need any other surfactant or capping agent to direct the anisotropic growth of the silver nanoparticles. The morphology of silver nanoplates has been confirmed by transmission electron microscopy, the growth process of nanoplates has been studied by UV/vis spectroscopy. Control experiments have been explored for a more thorough understanding of the growth mechanism. It was found that both the concentrations of TA and the pH of solution were the key elements to control the morphology silver nanoplates. The optical in-plane dipole plasmon resonance bands of these silver plates could be tuned from 520 to 1100 nm.     

Y2O3:Eu (5 mol%) with Ag nanoparticles prepared by citrate precursor

Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) and Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) containing 1 mol% of Ag nanoparticles were prepared by heat treatment of a viscous resin obtained via citrate precursor. TEM and EDS analyses showed that Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) is formed by nanoparticles with an average size of 12 nm, which increases to 30 nm when Ag is present because the effect of metal induced crystallization occurs. Ag nanoparticles with a size of 9 nm dispersed in Y₂O₃:Eu³⁺ (5 mol% Eu³⁺) were obtained and the surface plasmon effect on Ag nanoparticles was observed. The emission around 612 nm assigned to the Eu³⁺ (⁵D₀→⁷F₂) transition enhanced when the Ag nanoparticles were present in the Y₂O₃:Eu³⁺ luminescent material.     

Colorimetric detection of iron ions (III) based on the highly sensitive plasmonic response of the N-acetyl-l-cysteine-stabilized silver nanoparticles

We report here a facile colorimetric sensor based on the N-acetyl-l-cysteine (NALC)-stabilized Ag nanoparticles (NALC–Ag NPs) for detection of Fe³⁺ ions in aqueous solution. The Ag NPs with an average diameter of 6.55 ± 1.0 nm are successfully synthesized through a simple method using sodium borohydride as reducing agent and N-acetyl-l-cysteine as protecting ligand. The synthesized silver nanoparticles show a strong surface plasmon resonance (SPR) around 400 nm and the SPR intensity decreases with the increasing of Fe³⁺ concentration in aqueous solution. Based on the linear relationship between SPR intensity and concentration of Fe³⁺ ions, the as-synthesized water-soluble silver nanoparticles can be used for the sensitive and selective detection of Fe³⁺ ions in water with a linear range from 80 nM to 80 μM and a detection limit of 80 nM. On the basis of the experimental results, a new detection mechanism of oxidation–reduction reaction between Ag NPs and Fe³⁺ ions is proposed, which is different from previously reported mechanisms. Moreover, the NALC–Ag NPs could be applied to the detection of Fe³⁺ ions in real environmental water samples.     

Study of matrix effects and spectral interferences in the determination of lead in sediments, sludges and soils by SR-ETAAS using slurry sampling

An interference-free, fast, and simple method is proposed for Pb determination in environmental solid samples combining slurry sampling and electrothermal atomic absorption spectrometry. Samples were ground to an adequate particle size and slurries were prepared by weighing from 0.05 g to 0.20 g of dry sediment, adding nitric acid, and a solution containing 0.1% Triton X-100. Ultrasonic agitation was employed for slurries homogenization. Analytical variables including acid pre-treatment conditions, particle size, slurry stability, temperature program of the graphite furnace, and type and concentration of the chemical modifier were studied. The undesirable effects of potential non-specific and spectral interferences on Pb signal were also taken into account. Continuum source and self-reversal methods for background correction were evaluated and compared. For calibration, synthetic acid solutions of Pb were employed. Calibration was linear within the range 1-30 μg L⁻¹ and 5-30 μg L⁻¹ when the 217.0 nm and 283.3 nm analytical lines were used. Correlation coefficients of 0.9992 and 0.9997 were obtained. Using optimized conditions, limits of detection (3σ) of 0.025 μg g⁻¹ and 0.1 μg g⁻¹ were achieved for the 217.0 nm and 283.3 nm analytical lines, respectively. The method was successfully applied to the determination of lead in soil, contaminated soil, municipal sludge, and sediment samples. The accuracy was assessed by the analysis of two certified reference materials: municipal sludge (QC MUNICIPAL SLUDGE A) and lake sediment (TRAP-LRM from IJS).     

Synthesis of highly crystalline rhombohedral BN triangular nanoplates via a convenient solid state reaction

Highly crystalline rhombohedral boron nitride (r-BN) with regular triangular shapes were synthesized on a large scale in a stainless steel autoclave using B₂O₃ and NaNH₂ as reactants at 600 °C for 6 h. The as-prepared BN triangular nanoplates have an average edge length of 400 nm and the thickness of about 60 nm. The photoluminescence measurements reveal that the r-BN products show strong yellow-green emission. The as-prepared r-BN has potential optical and optoelectronic applications in high temperature devices due to its excellent thermal stability and anti-oxidation properties.     

Development of silver/gold nanocages onto indium tin oxide glass as a reagentless plasmonic mercury sensor

We demonstrate the utilization of silver/gold nanocages (Ag/Au NCs) deposited onto transparent indium tin oxide (ITO) film glass as the basis of a reagentless, simple and inexpensive mercury probe. The localized surface plasmon resonance (LSPR) peak wavelength was located at ∼800 nm. By utilizing the redox reaction between Hg²⁺ ions and Ag atoms that existed in Ag/Au NCs, the LSPR peak of Ag/Au NCs was blue-shifted. Thus, we develop an optical sensing probe for the detection of Hg²⁺ ions. The LSPR peak changes were lineally proportional to the concentration of Hg²⁺ ions over the range from 10 ppb to 0.5 ppm. The detection limit was ∼5 ppb. This plasmonic probe shows good selectivity and high sensitivity. The proposed optical probe is successfully applied to the sensing of Hg²⁺ in real samples.     

Novel fluorescent amphiphilic block copolymers: Controllable morphologies and size by self-assembly

New fluorescent amphiphilic copolymers polyacrylamide-b-poly(p-methacrylamido)acetophenone thiosemicarbazone (PAM-b-PMATC) were synthesized by atom transfer radical polymerization (ATRP) method. The structures of polymers were confirmed by ¹H NMR and gel permeation chromatography-multi-angle laser light scatting (GPC-MALLS). PAM-b-PMATC showed a broad emission peak about 388 nm excited at 318 nm in aqueous solution. The self-assembly behavior of PAM-b-PMATC in the binary mixture formamide/water was observed by transmission electron microscope (TEM). It indicated that PAM-b-PMATC-I and -II with the same PAM block self-assembled to vesicles and sunflower-like micelles. The water fraction in the mixture could control the size and thickness of vesicles. Vesicle size increased from 50 to 420 nm and vesicle thickness changed from 5 to 50 nm with water content ranging from 33 to 90 vol.%. In addition, the cytotoxicity in vitro of PAM-b-PMATC-I and its nanoparticles loaded with methotrexate (MTX) were evaluated by MTT assay.     

Cooperative self-construction and enhanced optical absorption of nanoplates-assembled hierarchical Bi2WO6 flowers

Bi₂WO₆ hierarchical multilayered flower-like assemblies are fabricated on a large scale by a simple hydrothermal method in the presence of polymeric poly(sodium 4-styrenesulfonate). Such 3D Bi₂WO₆ assemblies are constructed from orderly arranged 2D layers, which are further composed of a large number of interconnected nanoplates with a mean side length of ca. 50 nm. The bimodal mesopores associated with such hierarchical assembly exhibit peak mesopore size of ca. 4 nm for the voids within a layer, and peak mesopore size of ca. 40 nm corresponding to the interspaces between stacked layers, respectively. The formation process is discussed on the basis of the results of time-dependent experiments, which support a novel ‘coupled cooperative assembly and localized ripening’ formation mechanism. More interestingly, we have noticed that the collective effect related to such hierarchical assembly induces a significantly enhanced optical absorbance in the UV-visible region. This work may shed some light on the design of complex architectures and exploitation of their potential applications.     

Enhanced thermal and mechanical properties and biostability of polyurethane containing silver nanoparticles

A polyether-type polyurethane (PU) containing silver (Ag) nanoparticles (4-7 nm, 1.51 × 10⁻³-1.13 × 10⁻² wt-%) was prepared by mixing the waterborne PU with the nanoparticle suspension, casting and drying at 60 °C. The Ag nanoparticles were found to be well dispersed in PU. A significant increase in the thermal stability and mechanical properties of the polymer was demonstrated in the nanocomposite PU films, which was believed a result of induced crystallization in the presence of Ag nanoparticles. The biostability was tested in a rat subcutaneous model. After 19 days of implantation, the PU containing Ag showed enhanced biostability and lowered foreign body reaction. The effect of Ag on the stability of the PU polymer was even more remarkable over a wider range of particle contents than that of the gold nanoparticles previously studied.     

Transformation of silver nanospheres into triangular nanoplates through a photoinduced process

Triangular silver nanoplates exhibit excellent optical and catalytic properties in many fields, such as catalysts, sensors and bio-medicine. In this paper, triangular nanoplates were generated just in the presence of sodium citrate through a light-induced ripening process, which were converted from spherical silver nanoparticles by reducing silver nitrate with sodium borohydride. By using UV–Vis spectroscopy, particle size analyzer, transmission electron microscopy (TEM) and Ag⁺ concentration analysis, the effects of precursors during the preparation of triangular nanoplates were systematically investigated and the optimal experimental conditions were determined. Based on density functional theory (DFT), the adsorption energies of citrate ion, malate ion and tartronate ion on Ag (1 1 1), (1 1 0) and (1 0 0) were calculated. In addition, theoretical calculations coupled with experimental observations showed that citrate ion as capping agent could more preferentially bind to Ag (1 1 1) and thus blocked Ag (1 1 1) while only allowing extensive growth along the lateral direction. This well explains sodium citrate is an efficient agent in preparing triangular silver nanoplates.     

Synthesis and characterization of silica-silver core-shell composite particles with uniform thin silver layers

Silica-silver core-shell composite particles with uniform thin silver layers were successfully synthesized by a facile and one-step ultrasonic electrodeposition method. By electrolysis of the slurry consisting of preformed silica spheres and silver perchlorate without any additives, the homogenous composite particles can be prepared. The average size of single silver crystals in the composite is about 12 nm and the thickness of silver layer is 14±2 nm. Moreover, the continuity of Ag distribution, the surface roughness and the thickness of silver layer are controllable by adjusting the current density (I), the concentration of electrolyte (C) and the reaction time (t). Optical properties of the composite particles with different silver content were also investigated.     

Iontophoretic transdermal drug delivery system using a conducting polymeric membrane

This work investigated the application of a porous polyaniline (PANi) membrane as a conducting polymeric membrane as well as an electrode in an iontophoretic transdermal drug delivery (TDD) system. Model drugs studied were: caffeine (MW: 194.2), lidocaine HCl (MW: 270.8) and doxycycline HCl (MW: 480.1). The PANi membrane was first tested as a simple membrane between the donor and receptor solutions; it provided satisfactory permeation profiles; the observed flux values were well described by a simplified mass transport model. A mouse skin was then mounted beneath the PANi film; such a composite system also presented satisfactory permeation profiles. Iontophoretic TDD experiments were next performed using both Ag|AgCl electrodes and PANi|AgCl electrodes for comparison; a PANi anode replaced the Ag anode in the last set. For doxycycline HCl, the flux and the 24-h accumulation from the PANi|AgCl set were 94.4 ± 81.2 μg/cm² h and 2760 ± 3980 μg/cm², respectively; those from the Ag|AgCl set were zero. For lidocaine HCl, the flux and 10-h accumulation from the PANi|AgCl set were, respectively, 43 ± 15 μg/cm² h and 392 ± 130 μg/cm²; the corresponding values from the Ag|AgCl set were 48 ± 20 μg/cm² h and 348 ± 78 μg/cm². Porous polyaniline membrane appears to be capable of replacing the Ag part of Ag|AgCl electrode system; further such a membrane can exercise additional control over agent transport rate. Aqueous-organic partitioning system through the porous membrane of PANi was tested with this novel technique as well. Because of the rather low porosity of the synthesized PANi film, such a system did not yield a high permeation rate.     

Copper determination in sugar cane spirits by fast sequential flame atomic absorption spectrometry using internal standardization

In this study, a fast and simple method is proposed for the determination of Cu in sugar cane spirits employing fast sequential flame atomic absorption spectrometry and the internal standard technique. First, Ag, Bi, Co and Ni were evaluated as internal standards to minimize transport interferences. The results demonstrated that Ag at a concentration of 2 mg L^− 1 was effective. Under these conditions, Cu could be determined with a limit of detection of 15 µg L^− 1. Then, Cu was determined in 5 sugar cane spirit samples using the proposed method and the results were compared with those obtained by inductively coupled plasma optical emission spectrometry after microwave oven acid digestion. The content of Cu varied from 0.66 to 6.64 mg L^− 1. Accuracy and precision of the proposed method were evaluated by comparing the results obtained with both methods. A paired t-test at a 95% confidence level showed that the proposed method enabled the achievement of similar results as those obtained by ICP OES after acid digestion.     

Using a photochemical method and chitosan to prepare surface-enhanced Raman scattering–active silver nanoparticles

In this paper, we report a new strategy for the preparation of surface-enhanced Raman scattering (SERS)-active silver nanoparticles (Ag NPs), using a photochemical method and the presence of chitosan (Ch). First, Ag substrates were subjected to electrochemical oxidation/reduction cycles (ORCs) in deoxygenated aqueous solutions containing 0.1 M HNO₃ and 1 g L⁻¹ Ch (pH 6.9, adjusted by adding 1 M NaOH), resulting in Ag⁺–Ch complexes. These substrates were then irradiated with UV light at various wavelengths to yield the SERS-active Ag NPs. A stronger SERS effect was observed on the SERS-active Ag NPs prepared by using UV irradiation at 310 nm. The pH of the solution and the presence of Ch during the preparation process both affected the resulting SERS activities.     

Synthesis of new tripodal receptors—a ‘PET’ based ‘off-on’ recognition of Ag

A new set of tripodal receptors based upon an aromatic platform have been synthesized in high yields. The compounds have been characterized by spectroscopic techniques and by single crystal X-ray crystallography. These receptors are found to have good extraction ability and high transport rate for Ag(I). The receptor with imine linkages exhibits weak fluorescence emission bands at λ_max=413 and 540 nm, upon excitation at λ_max=365 nm. The fluorescence spectrum of the receptor shows enhancement in the intensity of the signal at 413 nm on binding with the Ag⁺ cation. No such significant changes are observed with other metal ions. An absorption at ∼365 nm is typical of an intraligand (π-π^∗) transition involving the imine chromophore, which produces a weak emission band at 413 nm due to quenching caused by PET from a neighboring -OH group. Participation of OH group in coordination to the metal ion reduces PET and an enhancement of fluorescence intensity is observed, signaling recognition of the metal ion.     

Particle size distributions of silver nanoparticles at environmentally relevant conditions

Silver nanoparticles (Ag NPs) are becoming increasingly popular as antimicrobial agents in consumer goods with consequent risk to environmental health from discharges. Environmentally relevant fate and transport investigations are limited but essential to gain understanding towards bioavailability and toxicology. In this study, monodisperse 15 nm citrate-stabilised Ag NPs were synthesised, characterised and then fractionated by flow field-flow fractionation (FlFFF) at environmentally relevant conditions (pH 5 or 8, presence of natural organic macromolecules (NOM) and presence of sodium or calcium). At low ionic strength, Ag NPs particle size increased as pH increased from 5 to 8. However, changing the ionic strength from 10⁻³ to 10⁻² M Na increased instability of the Ag NPs, and loss of peak at pH 5 but in the presence of humic substance (HS), a reduction in NP size was seen, most likely due to a reduction in the diffuse layer. The presence of Ca²⁺ ions, at the higher ionic strengths caused complete loss of the solution Ag NPs with or without HS, most likely due to aggregation. At the lower Ca²⁺ ionic strength the Ag NPs were still unstable, but again, in the presence of HS the NPs were largely dispersed. The presence of HS improved stability of Ag NPs under these conditions by forming a surface coating resulting in both steric and charge stabilisation. This work implies that Ag NPs could have long residence times in aquatic systems in the presence of HS potentially resulting in increased bioavailability.     

Shape evolution and thermal stability of Ag nanoparticles on spherical SiO2 substrates

In this paper, the shape evolution and thermal stability of Ag nanoparticles (NPs) on spherical SiO₂ substrates were investigated by means of in situ transmission electron microscopy (TEM) imaging and differential scanning calorimetry (DSC). The initial Ag NPs at room temperature were semispherical-like, with an average size of 9 nm in half-height width, well-dispersed on spherical SiO₂ substrates. No obvious shape change was observed when the semispherical NPs of Ag were heated at temperature lower than 550 °C. The shape of the semispherical Ag NPs changed gradually into a spherical one in the temperature range of 550-700 °C, where surface diffusion and surface premelting took place. When the heating temperature was increased up to 750 °C, the spherical Ag NPs were found to desquamate from the substrates due to the decreases of the contact area and the binding force between Ag NPs and SiO₂ substrates. A possible mechanism for the desquamation of Ag NPs from the SiO₂ sphere surface is proposed according to the results of in situ TEM observation and DSC analysis.     

Automatic screening method for the rapid and simple discrimination between synthetic and natural colorants in foods

A simple screening method was developed to discriminate between synthetic and natural colorants present in foods in order to reduce the use of expensive instruments such as a liquid chromatograph with diode array detection. A rapid flow system was proposed in which samples containing natural and synthetic colorants in an acetic acid medium were passed through a wool/cotton column, where only synthetic colorants were retained and were then eluted with dilute ammonia. Yellow, red and green-blue-brown additives can be monitored at 400, 530 and 610 nm, respectively, with a conventional spectrophotometer. Complete discrimination (no false positives) between natural and synthetic colorants can be obtained for molar concentrations of natural colorants (in the absence of synthetic ones) up to 2000 (yellow), 2000 (red) and 10 000 (brown) times that of the detection limit (DL) of synthetic additives. The reliability of the method was established at five concentrations (between 0.5 and 3 DL) of the synthetic colorants tartrazine (yellow), erythrosin B (red) and brilliant black BN (brown). For a cut-off concentration of 2 DL, the percentage of false negatives ranges from 8 to 12%. Finally, the method was applied to screening several fruit drinks and candies for the determination of synthetic colorants with a sampling frequency of 10 h⁻¹.     

Silver nanoplates formed at the air/water and solid/water interfaces

Silver nanoparticles and nanoplates were prepared at the air/AgNO₃ aqueous solution interfaces under poly(9-vinylcarbazole) (PVK) monolayers when illuminated by UV-light at room temperature and elevated temperatures, respectively. When the illuminated films at the air/water interfaces were covered by carbon-coated copper grids, nanoplates were formed even at room temperature, and the size of the nanoplates was much larger than those formed at the air/water interface under the same experimental conditions, indicating that copper took part in the formation of Ag nanoplates through the galvanic displacement reaction between Cu and Ag⁺ ions with the help of carbon layer to conduct electrons. It was found that the basal plane of these nanoplates is the (1 1 1) face of a face-centered cubic (fcc) Ag crystal. Although platelike structure can be formed at the carbon-coated copper grid/AgNO₃ aqueous solution interface without PVK film, it shows different features from those with PVK films, indicating that PVK film plays an important role in the formation of regular large nanoplates. Further observations indicate that special restrained microenvironment, adsorption of PVK molecules on a specific crystal face, anisotropic growth and attachment of the nanoparticles are responsible for the formation of the nanoplates.