Structural and P NMR investigation of Bi(MM′)2PO6 statistic solid solutions: Deconvolution of lattice constraints and cationic influences

Two solid solutions BiM_xMg_(2−x)PO₆ (with M²⁺=Zn or Cd) have been studied through ³¹P MAS NMR. The analysis has been performed on the basis of refined crystal structures through X-ray diffraction and neutron diffraction. The BiZn_xMg_(2−x)PO₆ does not provide direct evidence for sensitive changes in the phosphorus local symmetry. This result is in good agreement with structural data which show nearly unchanged lattices and atomic separations through the Zn²⁺ for Mg²⁺ substitution. On the other hand, the Cd²⁺ for Mg²⁺ substitution behaves differently. Indeed, up to five resonances are observed, each corresponding to one of the five first-cationic neighbour distributions, i.e. 4Mg/0Cd, 3Mg/1Cd, 2Mg/2Cd, 1Mg/3Cd and 0Mg/4Cd. Their intensities match rather well the expected weight for each configuration of the statistical Cd²⁺/Mg²⁺ mixed occupancy. The match is further improved when one takes into account the influence of the 2nd cationic sphere that is available from high-field NMR data (18.8 T). Finally, the fine examination of the chemical shift for each resonance versus x allows to de-convolute the mean Z/a² effective field into two sub-effects: a lattice constraint-only term and a chemical-only term whose effects are directly quantifiable.     

Mechanochemical-thermal preparation and structural studies of mullite-type Bi2(GaxAl1−x)4O9 solid solutions

A series of Bi₂(Ga_xAl_1−x)₄O₉ solid solutions (0≤x≤1), prepared by mechanochemical processing of Bi₂O₃/Ga₂O₃/Al₂O₃ mixtures and subsequent annealing, was investigated by XRD, EDX, and ²⁷Al MAS NMR. The structure of the Bi₂(Ga_xAl_1−x)₄O₉ solid solutions is found to be orthorhombic, space group Pbam (No. 55). The lattice parameters of the Bi₂(Ga_xAl_1−x)₄O₉ series increase linearly with increasing gallium content. Rietveld refinement of the XRD data as well as the analysis of the ²⁷Al MAS NMR spectra show a preference of gallium cations for the tetrahedral sites in Bi₂(Ga_xAl_1−x)₄O₉. As a consequence, this leads to a far from random distribution of Al and Ga cations across the whole series of solid solutions.     

Eu luminescence—a structural probe in BiCa4(PO4)3O, an apatite related phosphate

Eu³⁺ luminescence is studied in apatite-related phosphate BiCa₄(PO₄)₃O. Compositions of the formula Bi_1−xEu_xCa₄(PO₄)₃O [x=0.05, 0.1, 0.3, 0.5, 0.8 and 1.0] are synthesized and they are isostructural with parent BiCa₄(PO₄)₃O. Room temperature photoluminescence shows the various transitions ⁵D₀→⁷F_J(=0,1,2) of Eu³⁺. The emission results of compositions with different Eu³⁺ content show the difference in site occupancy of Eu³⁺ in Bi_1−xEu_xCa₄(PO₄)₃O. The intense ⁵D₀-⁷F₀ line at 574 nm for higher Eu³⁺ content is attributed to the presence of strongly covalent Eu-O bond that is possible by substituting Bi³⁺ in the Ca(2) site. This shows the preferential occupancy of Bi³⁺ in Ca(2) site and this has been attributed to the 6s² lone pair electrons of Bi³⁺. This is further confirmed by comparing the emission results with La_0.95Eu_0.05Ca₄(PO₄)₃O.     

In and F MAS NMR study of (NH4)3InF6 phases

This study presents for the first time an NMR spectroscopic characterization of the room and high temperature phases of (NH₄)₃InF₆ using ¹⁹F and ¹¹⁵In as probe nuclei. The reversible phase transition to the cubic phase at 353 K was followed by MAS NMR in situ. Static NMR experiments of the room temperature phase and MAS NMR experiments of the high temperature phase allowed the determination of the NMR parameters of both nuclei. Finally, the scalar In-F coupling, rarely observed in solid state NMR, is evidenced in both room and high temperature phases of (NH₄)₃InF₆, and measured in the high temperature phase.     

Al NMR studies of Ce-Al mixed oxides: origin of 40 ppm peak

CeO₂-γ-Al₂O₃ mixed oxides have been prepared by using both co-precipitation and impregnation methods followed by calcination at 650°C and investigated by ²⁷Al MAS NMR, powder X-ray diffraction and temperature programmed reduction techniques to understand the nature of chemical interaction existing between CeO₂ and γ-Al₂O₃. The ²⁷Al NMR spectra of CeO₂-containing samples showed an additional peak placed at 40 ppm along with the two peaks at 68 and 6 ppm which originate from the tetrahedrally and octahedrally coordinated Al³⁺ ions present in γ-Al₂O₃. As the concentration of CeO₂ in the mixed oxide increased, the intensity of the 40 ppm peak increased and this was the prominent peak for CeO₂-rich mixed oxide samples. The origin of this 40 ppm peak is discussed and it is inferred that this peak is due to Al³⁺ ions, which are present in CeO₂ lattice, forming a solid solution.     

Impact of metal substitutions for cobalt in YBaCo4O7

The “114” YBaCo₄O₇ cobaltite undergoes structural transition just beyond room temperature at T_S∼310 K. Correspondingly, its signature in the physical properties is detected by T-dependent measurements of electrical resistivity, magnetic susceptibility and thermoelectric power. It is found that low-level substitutions of divalent (M=Zn²⁺) or trivalent (M=Ga³⁺, Al³⁺) cations for cobalt according to the YBaCo_4−xM_xO₇ formula with x?0.4 have a strong impact upon this transition. On the one hand, Zn²⁺ substitutions preserve the transition but with T_S decreasing as x increases. On the other hand, for x=0.2 Ga³⁺ or Al³⁺, the transition is suppressed, i.e., for only 5% trivalent foreign cation substituted for cobalt. Though at first, this contrasted behaviour between divalent and trivalent substituting cations appears to be linked to the opposite evolution of hole carriers “Co³⁺” concentration with x, a possible destabilization of 3Co²⁺: 1Co³⁺ charge ordering induced by the M³⁺ cations is considered.     

Cs4P2Se10: A new compound discovered with the application of solid-state and high temperature NMR

The new compound Cs₄P₂Se₁₀ was serendipitously produced in high purity during a high-temperature synthesis done in a nuclear magnetic resonance (NMR) spectrometer. ³¹P magic angle spinning (MAS) NMR of the products of the synthesis revealed that the dominant phosphorus-containing product had a chemical shift of −52.8 ppm that could not be assigned to any known compound. Deep reddish brown well-formed plate-like crystals were isolated from the NMR reaction ampoule and the structure was solved with X-ray diffraction. Cs₄P₂Se₁₀ has the triclinic space group P-1 with a=7.3587(11) Å, b=7.4546(11) Å, c=10.1420(15) Å, α=85.938(2)°, β=88.055(2)°, and γ=85.609(2)° and contains the [P₂Se₁₀]⁴⁻ anion. To our knowledge, this is the first compound containing this anion that is composed of two tetrahedral (PSe₄) units connected by a diselenide linkage. It was also possible to form a glass by quenching the melt in ice water, and Cs₄P₂Se₁₀ was recovered upon annealing. The static ³¹P NMR spectrum at 350 °C contained a single peak with a −35 ppm chemical shift and a ∼7 ppm peak width. This study highlights the potential of solid-state and high-temperature NMR for aiding discovery of new compounds and for probing the species that exist at high temperature.     

Be and P NMR analyses on Be complexation with cyclo-tri-μ-imidotriphosphate anions in aqueous solution

Microscopic information on the complexation of Be²⁺ with cyclo-tri-μ-imidotriphosphate anions in aqueous solution has been gained by both ⁹Be and ³¹P NMR techniques at −2.3 °C. Separate NMR signals corresponding to free and complexed species have been observed in both spectra. Based on an empirical additivity rule, i.e., proportionality observed between the ⁹Be NMR chemical shift values and the number of coordinating atoms of ligand molecules, the ⁹Be NMR spectra have been deconvoluted. By precise equilibrium analyses, the formation of [BeX(H₂O)₃]⁺ and [BeX₂(H₂O)₂]⁰ (X = non-bridging oxygen donor as a coordination atom in the phosphate groups) has been verified, and the formation of complexes coordinating with the nitrogen atoms of the cyclic framework in the ligand molecule has been excluded. Instead, the formation of one-to-one (ML) complexes, one-to-two (ML₂), together with two-to-one (M₂L) complexes (L = cP₃O₆(NH)₃) has been disclosed, the stability constants of which have been evaluated as log K_ML = 3.87 ± 0.03 (mol dm⁻³)⁻¹, log K_ML2 = 2.43 ± 0.03 (mol dm⁻³)⁻² and log K_M2L = 1.30 ± 0.02 (mol dm⁻³)⁻², respectively. ³¹P NMR spectra measured concurrently have verified the formation of the complexes estimated by the ⁹Be NMR measurement. Intrinsic ³¹P NMR chemical shift values of the phosphorus atoms belonging to ligand molecules complexed with Be²⁺, together with the ³¹P-³¹P spin-spin coupling constants have been determined.     

Synthesis, crystal structure, spectrum properties, and electronic structure of a novel non-centrosymmetric borate, BiCd3(AlO)3(BO3)4

A novel non-centrosymmetric borate, BiCd₃(AlO)₃(BO₃)₄, has been prepared by solid state reaction methods below 750 °C. Single-crystal XRD analysis showed that it crystallizes in the hexagonal group P6₃ with a=10.3919(15) Å, c=5.7215(11) Å, Z=2. In its structure, AlO₆ octahedra share edges to form 1D chains that are bridged by BO₃ groups through sharing O atoms to form the 3D framework. The 3D framework affords two kinds of channels that are occupied by Bi³⁺/Cd²⁺ atoms only or by Bi³⁺/Cd²⁺ atoms together with BO₃ groups. The IR spectrum further confirmed the presence of BO₃ groups. Second-harmonic-generation measurements displayed a response of about 0.5×KDP (KH₂PO₄). UV-vis diffuse reflectance spectrum showed a band gap of about 3.19 eV. Solid-state fluorescence spectrum exhibited the maximum emission peak at around 390.6 nm. Band structure calculations indicated that it is an indirect semiconductor.     

Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries

A Na₃V₂(PO₄)₃ sample coated uniformly with a layer of 6 nm carbon has been successfully synthesized by a one-step solid state reaction. This material shows two flat voltage plateaus at 3.4 V vs. Na⁺/Na and 1.63 V vs. Na⁺/Na in a nonaqueous sodium cell. When the Na₃V₂(PO₄)₃/C sample is tested as a cathode in a voltage range of 2.7-3.8 V vs. Na⁺/Na, its initial charge and discharge capacities are 98.6 and 93 mAh/g. The capacity retention of 99% can be achieved after 10 cycles. The electrode shows good cycle performance and moderate rate performance. When it is tested as an anode in a voltage range of 1.0-3.0 V vs. Na⁺/Na, the initial reversible capacity is 66.3 mAh/g and the capacity of 59 mAh/g can be maintained after 50 cycles. These preliminary results indicate that Na₃V₂(PO₄)₃/C is a new promising material for sodium ion batteries.     

Structural evolution of Na0.5K0.5NbO3 at high temperatures

Changes in structure and dielectric properties at elevated temperatures have been investigated on single-crystals of sodium potassium niobate, Na_0.5K_0.5NbO₃, grown by the flux method. Single-crystal X-ray diffraction studies revealed that the crystals underwent orthorhombic-tetragonal and tetragonal-cubic phase transitions at 465 and 671 K during heating and 446 and 666 K during cooling, respectively. Both transitions were accompanied by volumetric discontinuities of collapse upon heating and expansion upon cooling, suggesting that the transitions were of the first order. The coordination numbers of an Nb showed a decreasing tendency with decreasing temperature, i.e., 6 in cubic, 5+1 in tetragonal and 4+2 in orthorhombic. An Na atom occupied a slightly different position from the K atom in 12-fold coordination, resulting in fewer coordination numbers of 8+4 in cubic and tetragonal and 7+5 in orthorhombic. The spontaneous polarisation (P_s) estimated from the atom positions and formal charges were approximately 0.29 C m⁻² in orthorhombic and 0.18 C m⁻² in tetragonal. The contribution of the alkaline oxide components to P_s was estimated to be approximately 15% in both ferroelectric forms. The temperature-induced transitions were also confirmed through the dielectric constant and dielectric loss at various frequencies and the differential scanning calorimetry.     

[H3N(CH2)4NH3]2[Al4(C2O4)(H2PO4)2(PO4)4]·4[H2O]: A new layered aluminum phosphate-oxalate

A new layered inorganic-organic hybrid aluminum phosphate-oxalate [H₃N(CH₂)₄NH₃]₂[Al₄(C₂O₄)(H₂PO₄)₂(PO₄)₄]·4[H₂O](AlPO-CJ25) has been synthesized hydrothermally, by using 1,4-diaminobutane (DAB) as structure-directing agent. The structure has been solved by single-crystal X-ray diffraction analysis and further characterized by IR, ³¹P MAS NMR, TG-DTA as well as compositional analyses. Crystal data: the triclinic space group P-1, a=8.0484(7) Å, b=8.8608(8) Å, c=13.2224(11) Å, α=80.830(6)°, β=74.965(5)°, γ=78.782(6)°, Z=2, R_1[I>2σ(I)]=0.0511 and wR_{2(all data)}=0.1423. The alternation of AlO₄ tetrahedra and PO₄ tetrahedra gives rise to the four-membered corner-sharing chains, which are interconnected through AlO₆ octahedra to form the layered structure with 4,6-net sheet. Interestingly, oxalate ions are bis-bidentately bonded by participating in the coordination of AlO₆, and bridging the adjacent AlO₆ octahedra. The layers are held with each other through strong H-bondings between the terminal oxygens. The organic ammonium cations and water molecules are located in the large cavities between the interlayer regions.     

Synthesis, structure, and magnetic properties of SrMn1−xGaxO3−δ (x=0-0.5) perovskites

We report the synthesis of SrMn_1−xGa_xO_3−δ perovskite compounds and describe the dependence of their phase stability and structural and physical properties over extended cation and oxygen composition ranges. Using special synthesis techniques derived from thermogravimetric measurements, we have extended the solubility limit of random substitution of Ga³⁺ for Mn in the cubic perovskite phase to x=0.5. In the cubic perovskite phase the maximum oxygen content is close to 3−x/2, which corresponds to 100% Mn⁴⁺. Maximally oxygenated solid solution compounds are found to order antiferromagnetically for x=0-0.4, with the transition temperature linearly decreasing as Ga content increases. Increasing the Ga content introduces frustration into the magnetic system and a spin-glass state is observed for SrMn_0.5Ga_0.5O_2.67(3) below 12 K. These properties are markedly different from the long-range antiferromagnetic order below 180 K observed for the layer-ordered compound Sr₂MnGaO_5.50 with nominally identical chemical composition.     

Hydrothermal synthesis and luminescent properties of Sb-doped Sr3(PO4)2

Sb³⁺-doped Sr₃(PO₄)₂ crystals has been synthesized using phosphoric acid, strontium hydroxide and antimony powder as the raw materials through a hydrothermal reaction method. The crystallinity and the microstructure were investigated using X-ray diffraction and scanning electron microscopy. The photoluminescent property was investigated using luminescent spectrometer. Phase pure Sr₃(PO₄)₂ crystal was obtained and it has a shape of hexagonal rod. It showed the emission and excitation peaks at 396, 250, and 215 nm, respectively, indicating that the emission is attributed to ³P₁-¹S₀ transition and the excitation is attributed to ¹S₀-³P₁ and ¹S₀-¹P₁ transition. It was also observed that the intensity of photoluminescence is thermally stable up to 673 K.     

New process of preparation, structure, and physicochemical investigations of the new titanyl phosphate Ti2O(H2O)(PO4)2

New titanyl phosphate Ti₂O(H₂O)(PO₄)₂ has been prepared and characterized by X-ray and neutron diffraction, nuclear magnetic resonance, infrared and Raman spectroscopies and thermogravimetric analysis. The crystal structure has been solved from neutron powder diffraction data at 300 K by Rietveld method in P2₁ space group. The refinement led to satisfactory profile factors (R_p=2.7%, R_wp=3.2%) and crystal structure model indicators (R_B=5.8%, R_F=3.2%). The cell is monoclinic with a=7.3735 Å, b=7.0405 Å, c=7.6609 Å and β=121.48°, Z=4. The structure can be described as a three-dimensional framework built up by chains of [TiO₅(OH₂)] octahedra with alternative short bonds [Ti₍₁₎-O₍₁₂₎; Ti₍₂₎-O₍₁₂₎, 1.88-1.84 Å] and long ones [Ti₍₁₎-O_W; Ti₍₂₎-O_W, 2.25-2.23 Å] along c-axis and connected via [PO₄] tetrahedra. Oxygen atom denoted O₍₁₂₎ is only linked to two titanium atoms and Oxygen atom denoted O_W is linked to two titanium atoms and two hydrogen atoms. O₍₁₂₎ and O_W are not linked to P atoms and justify the titanyl phosphate formulation Ti₂O(H₂O)(PO₄)₂. The infrared and Raman spectra presents peaks due to vibrations of Ti-O, P-O and O-H bonds. The ³¹P MAS NMR spectrum reveals two ³¹P resonance lines, in agreement with the structure which showed two crystallographic sites for phosphorus. The thermogravimetric analysis show that Ti₂O(H₂O)(PO₄)₂ is thermally stable until 400 °C. Above this temperature, it losses water and decomposes to Ti₅O₄(PO₄)₄ and TiP₂O₇.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

Synthesis of Gd3PO7:Eu nanospheres via a facile combustion method and optical properties

Eu³⁺-doped Gd₃PO₇ nanospheres with an average diameter of ∼300 nm and a narrow size distribution have been prepared by a facile combustion method and structurally characterized by X-ray diffraction and field emission scanning electron microscopy. The luminescent properties were systemically studied by the measurement of excitation/emission spectra, and emission spectra under different temperatures, as well as by photostability. The strong red-emission intensity peaking at 614 nm originates the ⁵D₀→⁷F₂ transition and is observed under 254-nm irradiation, indicating that Eu³⁺ ions in Gd₃PO₇ mainly occupied non-centrosymmetry sites. The CIE1931 XY chromaticity coordinates of Gd₃PO₇:Eu³⁺ nanospheres are (x=0.654, y=0.345) in the red area, which is near the National Television Standard Committee standard chromaticity coordinates for red. Thus, Gd₃PO₇:Eu³⁺ nanospheres may be potential red-emitting phosphors for PDP and Xe-based mercury-free lamps.     

A new sodium hydroxygallophosphate containing tetrameric gallium units: Na3[Ga4O(OH)(H2O)(PO4)4]·H2O

A new sodium hydroxygallophosphate, Na₃Ga₄O(OH)(H₂O)(PO₄)₄·H₂O, has been prepared by hydrothermal synthesis. Its structure has been determined from a single-crystal X-ray diffraction study. It crystallizes in the P2₁/c space group with the cell parameters a=9.445(2) Å, b=9.028(1) Å, c=19.209(3) Å, β=102.08(2), V=1603.4(4) Å³. Its three-dimensional framework can be described from PO₄ monophosphate groups sharing their apices with original Ga₄O₁₆(OH)(H₂O) tetrameric building units, which result from the assembly of one GaO₄ tetrahedron, one GaO₅ trigonal bipyramid and two octahedra: GaO₅(OH) and GaO₄(OH)(H₂O). The sodium cations and one water molecule are located in tunnels running along b.     

High-pressure transitions in MgAl2O4 and a new high-pressure phase of Mg2Al2O5

Phase transitions in MgAl₂O₄ were examined at 21-27 GPa and 1400-2500 °C using a multianvil apparatus. A mixture of MgO and Al₂O₃ corundum that are high-pressure dissociation products of MgAl₂O₄ spinel combines into calcium-ferrite type MgAl₂O₄ at 26-27 GPa and 1400-2000 °C. At temperature above 2000 °C at pressure below 25.5 GPa, a mixture of Al₂O₃ corundum and a new phase with Mg₂Al₂O₅ composition is stable. The transition boundary between the two fields has a strongly negative pressure-temperature slope. Structure analysis and Rietveld refinement on the basis of the powder X-ray diffraction profile of the Mg₂Al₂O₅ phase indicated that the phase represented a new structure type with orthorhombic symmetry (Pbam), and the lattice parameters were determined as a=9.3710(6) Å, b=12.1952(6) Å, c=2.7916(2) Å, V=319.03(3) Å³, Z=4. The structure consists of edge-sharing and corner-sharing (Mg, Al)O₆ octahedra, and contains chains of edge-sharing octahedra running along the c-axis. A part of Mg atoms are accommodated in six-coordinated trigonal prism sites in tunnels surrounded by the chains of edge-sharing (Mg, Al)O₆ octahedra. The structure is related with that of ludwigite (Mg, Fe²⁺)₂(Fe³⁺, Al)(BO₃)O₂. The molar volume of the Mg₂Al₂O₅ phase is smaller by 0.18% than sum of molar volumes of 2MgO and Al₂O₃ corundum. High-pressure dissociation to the mixture of corundum-type phase and the phase with ludwigite-related structure has been found only in MgAl₂O₄ among various A²⁺B³⁺₂O₄ compounds.